Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Actors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2011

Country Review of Energy-Efficiency Financial Incentives in the Residential Sector

A large variety of energy-efficiency policy measures exist. Some are mandatory, some are informative, and some use financial incentives to promote diffusion of efficient equipment. From country to country, financial incentives vary considerably in scope and form, the type of framework used to implement them, and the actors that administer them. They range from rebate programs administered by utilities under an Energy-Efficiency Resource Standards (EERS) regulatory framework (California, USA) to the distribution of Eco-points rewarding customers for buying highly efficient appliances (Japan). All have the primary objective of transforming the current market to accelerate the diffusion of efficient technologies by addressing up-front cost barriers faced by consumers; in most instances, efficient technologies require a greater initial investment than conventional technologies. In this paper, we review the different market transformation measures involving the use of financial incentives in the countries belonging to the Major Economies Forum. We characterize the main types of measures, discuss their mechanisms, and provide information on program impacts to the extent that ex-ante or ex-post evaluations have been conducted. Finally, we identify best practices in financial incentive programs and opportunities for coordination between Major Economies Forum countries as envisioned under the Super Efficient Appliance Deployment (SEAD) initiative.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2010

Safeguarding and Protecting the Nuclear Fuel Cycle

International safeguards as applied by the International Atomic Energy Agency (IAEA) are a vital cornerstone of the global nuclear nonproliferation regime - they protect against the peaceful nuclear fuel cycle becoming the undetected vehicle for nuclear weapons proliferation by States. Likewise, domestic safeguards and nuclear security are essential to combating theft, sabotage, and nuclear terrorism by non-State actors. While current approaches to safeguarding and protecting the nuclear fuel cycle have been very successful, there is significant, active interest to further improve the efficiency and effectiveness of safeguards and security, particularly in light of the anticipated growth of nuclear energy and the increase in the global threat environment. This article will address two recent developments called Safeguards-by-Design and Security-by-Design, which are receiving increasing broad international attention and support. Expected benefits include facilities that are inherently more economical to effectively safeguard and protect. However, the technical measures of safeguards and security alone are not enough - they must continue to be broadly supported by dynamic and adaptive nonproliferation and security regimes. To this end, at the level of the global fuel cycle architecture, 'nonproliferation and security by design' remains a worthy objective that is also the subject of very active, international focus.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2011

Working with Workflows: Highlights from 5 years Building Scientific Workflows

In 2006, the SciDAC Scientific Data Management (SDM) Center proposed to continue its work deploying leading edge data management and analysis capabilities to scientific applications. One of three thrust areas within the proposed center was focused on Scientific Process Automation (SPA) using workflow technology. As a founding member of the Kepler consortium [LAB+09], the SDM Center team was well positioned to begin deploying workflows immediately. We were also keenly aware of some of the deficiencies in Kepler when applied to high performance computing workflows, which allowed us to focus our research and development efforts on critical new capabilities which were ultimately integrated into the Kepler open source distribution, benefiting the entire community. Significant work was required to ensure Kepler was capable of supporting large-scale production runs for SciDAC applications. Our work on generic actors and templates have improved the portability of workflows across machines and provided a higher level of abstraction for workflow developers. Fault tolerance and provenance tracking were obvious areas for improvement within Kepler given the longevity and complexity of our target workflows. To monitor workflow execution, we developed and deployed a web-based dashboard. We then generalized this interface and released it so it could be deployed at other locations. Outreach has always been a primary focus of our work and we had many successful deployments across a number of scientific domains while continually publishing and presenting our work. This short paper describes our most significant accomplishments over the past 5 years. Additional information about the SDM Center can be found in the companion paper: The Scientific Data Management Center: Available Technologies and Highlights.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2012

Resilient Control System Execution Agent (ReCoSEA)

In an increasingly networked world, critical infrastructure systems suffer from two types of vulnerability. The first is the traditionally recognized problem of monitoring the systems for faults and failures, recognizing and analyzing data, and responding with real understanding to the problems of the system. Increasingly complex systems create the opportunity for single points of failure to cascade when inaccurate assessment of system health increases response time or leads to faulty analysis of the problems involved. A second problem involves vulnerability to cyber intrusion, in which bad actors can mask system deterioration or present false data about system status. A resilient system will protect stability, efficiency, and security. To ensure these three states, the system must react to changing conditions within the system with coordination: no one component of the system can be allowed to react to problems without real consideration of the effects of that action on other components within the system. Systems with multi-agent design typically have three layers of action, a management layer, a coordination layer, and an execution layer. A resilient multi-agent system will emphasize functions of the execution layer, which has the responsibility of initiating actions, monitoring, analyzing, and controlling its own processes, while feeding information back to the higher levels of management and coordination. The design concept of a resilient control system execution agent (ReCoSEA) grows out of these underpinnings, and through the use of computational intelligence techniques, this paper suggests an associated design methodology.

47 OTHER INSTRUMENTATION↗
DOE OSTI2013

Consumer Convenience and the Availability of Retail Stations as a Market Barrier for Alternative Fuel Vehicles: Preprint

The availability of retail stations can be a significant barrier to the adoption of alternative fuel light-duty vehicles in household markets. This is especially the case during early market growth when retail stations are likely to be sparse and when vehicles are dedicated in the sense that they can only be fuelled with a new alternative fuel. For some bi-fuel vehicles, which can also fuel with conventional gasoline or diesel, limited availability will not necessarily limit vehicle sales but can limit fuel use. The impact of limited availability on vehicle purchase decisions is largely a function of geographic coverage and consumer perception. In this paper we review previous attempts to quantify the value of availability and present results from two studies that rely upon distinct methodologies. The first study relies upon stated preference data from a discrete choice survey and the second relies upon a station clustering algorithm and a rational actor value of time framework. Results from the two studies provide an estimate of the discrepancy between stated preference cost penalties and a lower bound on potential revealed cost penalties.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2013

COMMENTARY:Limits to adaptation

An actor-centered, risk-based approach to defining limits to social adaptation provides a useful analytic framing for identifying and anticipating these limits and informing debates over society s responses to climate change.

Preston, Benjamin L↗
DOE OSTI2014

Discrete Mathematical Approaches to Graph-Based Traffic Analysis

Modern cyber defense and anlaytics requires general, formal models of cyber systems. Multi-scale network models are prime candidates for such formalisms, using discrete mathematical methods based in hierarchically-structured directed multigraphs which also include rich sets of labels. An exemplar of an application of such an approach is traffic analysis, that is, observing and analyzing connections between clients, servers, hosts, and actors within IP networks, over time, to identify characteristic or suspicious patterns. Towards that end, NetFlow (or more generically, IPFLOW) data are available from routers and servers which summarize coherent groups of IP packets flowing through the network. In this paper, we consider traffic analysis of Netflow using both basic graph statistics and two new mathematical measures involving labeled degree distributions and time interval overlap measures. We do all of this over the VAST test data set of 96M synthetic Netflow graph edges, against which we can identify characteristic patterns of simulated ground-truth network attacks.

Joslyn, Cliff A.↗
DOE OSTI2016

The Multi-Dimensional Character of Core-Collapse Supernovae

Core-collapse supernovae, the culmination of massive stellar evolution, are spectacular astronomical events and the principle actors in the story of our elemental origins. Our understanding of these events, while still incomplete, centers around a neutrino-driven central engine that is highly hydrodynamically unstable. Increasingly sophisticated simulations reveal a shock that stalls for hundreds of milliseconds before reviving. Though brought back to life by neutrino heating, the development of the supernova explosion is inextricably linked to multi-dimensional fluid flows. In this paper, the outcomes of three-dimensional simulations that include sophisticated nuclear physics and spectral neutrino transport are juxtaposed to learn about the nature of the three dimensional fluid flow that shapes the explosion. Comparison is also made between the results of simulations in spherical symmetry from several groups, to give ourselves confidence in the understanding derived from this juxtaposition.

Hix, William Raphael↗
DOE OSTI2015

Finite Energy and Bounded Actuator Attacks on Cyber-Physical Systems

As control system networks are being connected to enterprise level networks for remote monitoring, operation, and system-wide performance optimization, these same connections are providing vulnerabilities that can be exploited by malicious actors for attack, financial gain, and theft of intellectual property. Much effort in cyber-physical system (CPS) protection has focused on protecting the borders of the system through traditional information security techniques. Less effort has been applied to the protection of cyber-physical systems from intelligent attacks launched after an attacker has defeated the information security protections to gain access to the control system. In this paper, attacks on actuator signals are analyzed from a system theoretic context. The threat surface is classified into finite energy and bounded attacks. These two broad classes encompass a large range of potential attacks. The effect of theses attacks on a linear quadratic (LQ) control are analyzed, and the optimal actuator attacks for both finite and infinite horizon LQ control are derived, therefore the worst case attack signals are obtained. The closed-loop system under the optimal attack signals is given and a numerical example illustrating the effect of an optimal bounded attack is provided.

Djouadi, Seddik M↗
DOE OSTI2016

Establishing a Common Definition for Zero Energy Buildings: Time to Move the Market

To change the current paradigm from buildings being consumers of energy to producers of energy requires a common language to facilitate market transformation. Common definitions help create market movement by sharing concepts across market actors. While the term 'zero energy buildings' has been in the marketplace for over 20 years, no common definition had been established. US DOE, last year, embarked on a process to evaluate current definitions and solicit industry input to formulate a common definition and nomenclature for zero energy buildings. This definition uses commonly available site measurements and national conversion factors to define zero energy buildings on a source energy basis for a variety of boundary conditions including building, portfolio, campus, and community. Issues addressed include multiple fuel types, cogeneration, and renewable energy certificates. This paper describes the process used to arrive at the definition, looks at methods of calculating site to source energy conversions, and how boundary decisions affect a robust and stable definition that can be used to direct programs and policies for many years to come. This stability is critical to move building investments towards buildings that produce as much energy as they consume.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2016

How I Learned to Stop Worrying and Love 3D Printing

The nuclear nonproliferation regime has many robust measures in place to prevent the acquisition of a nuclear weapon, a key pillar of which is denying or preventing the transfer of technology to specific actors. Additive manufacturing (AM) is a rapidly advancing, not fully understood technology that could dramatically alter the landscape of the safeguarded fuel cycle. However, many of the benefits of AM could also be used to circumvent or defeat current safeguard practices and controls. Because the AM capability is not fully understood, research and integration is necessary early in the technology development stages in order for nonproliferation to remain on the leading edge of discovery and not the tail end of technology deployment.

3D printing↗
DOE OSTI2017

SimCell Status Board

The Virtual SimCell is a method embodied in several software applications based on the Virtual Community Platform (VCP) (ANL-SF-11-049) and its Real-Time Dashboard (RTD) app. The purpose of this method is to more efficiently facilitate emergency preparedness exercises by allowing emergency preparedness exercise Simulation Cells -- SimCells -- to be established and managed through a computer network. SimCells take the place of organizations that would respond to actual emergencies, but are not participants in exercises of emergency preparedness plans. In effect, SimCells serve as actors portraying how those organizations would respond during real emergency events. The SimCell Status Board (SSB) is an RTD mini-app for controllers to communicate exercise events to players and each other by entering information into an integrated system of pre-defined data fields, displaying those data effectively, and preserving them for easy access during exercise evaluations.

Tanzman, Edward↗
DOE OSTI2016

Chapter 15: Using System Dynamics to Model Industry's Developmental Response to Energy Policy

In this chapter we explore the potential development of the biofuels industry using the Biomass Scenario Model (BSM), a system dynamics model developed at the National Renewable Energy Laboratory through the support of the U.S. Department of Energy. The BSM is designed to analyze the implications of policy on the development of the supply chain for biofuels in the United States. It explicitly represents the behavior of decision makers such as farmers, investors, fueling station owners, and consumers. We analyze several illustrative case studies that explore a range of policies and discuss how incentives interact with individual parts of the supply chain as well as the industry as a whole. The BSM represents specific incentives that are intended to approximate policy in the form of selected laws and regulations. Through characterizing the decision making behaviors of economic actors within the supply chain that critically influence the adoption rate of new biofuels production technologies and demonstrating synergies among policies, we find that incentives with coordinated impacts on each major element of the supply chain catalyze net effects of decision maker behavior such that the combined incentives are greater than the summed effects of individual incentives in isolation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2017

R&D 100 Winner 2017 HADES Platform

The HADES Platform radically changes the way cyber defenders protect their networks and gain insight by gathering information on the adversary's tools, tactics and procedures. The High-fidelity Adaptive Deception & Emulation System being developed at Sandia National Labs creates complex and realistic environments that an actor can interact with - something current honeypots and other deceptive techniques do no offer.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Modeling behavior in a network using event logs

A framework is provided for modeling the activity surrounding user credentials and/or machine level activity on a computer network using computer event logs by viewing the logs attributed to each user as a multivariate data stream. The methodology performs well in detecting compromised user credentials at a very low false positive rate. Such a methodology may detect both users of compromised credentials by external actors and otherwise authorized users who have begun engaging in malicious activity.

Turcotte, Melissa J. M.↗
DOE OSTI2020

INDUSTRY ENGAGEMENT TO ESTABLISH A ROBUST SECURITY APPROACH TO MOBILE RADIOACTIVE SOURCES

The mobile radiological sources used in the well-logging and radiography industries are of sufficient curie quantities to be categorized as desirable material for malicious actors. Beyond the security risk posed by these sources, there is also an understanding of the potential damage, both reputational and monetary, that a lost source would have on the licensee and the industry overall. Identifying and communicating the risk these sources pose with impacted stakeholders is a critical first step in developing a security approach. Common day-to-day operations within both industries drive the unique security challenge of mobile sources. From storage facilities, transportation vehicles, temporary storage locations, and use in the field, each phase creates challenges regarding source control and accountability. All aspects of the operational use of these sources needs to be fully understood in order to address security equipment enhancements, policies, procedures, and training. This paper will leverage more than ten years of experience that ORS has gained working closely with industry partners and mobile radiological source users across the well-logging and radiography industries. It will identify the risk posed by mobile radiological sources, clearly define the operational phases of each industry, identify security best practices of mobile sources, and discuss what long-term, sustainable security looks like within these industries. In addition, it will explore areas of a robust security approach that are not commonly given priority in these industries, such as alarm adjudication and response.

Office of Radiological Security↗
DOE OSTI2020

Regulatory Development Challenges and Opportunities for the Safe and Secure Transport of Radioactive Materials

Drafting regulations for transport safety and transport security achieve two separate objectives, which can lead to divergent outcomes. With transport safety, the principle goal is to protect the public and the environment from the effects of ionizing radiation, while in contrast, the principle goal of transport security is to protect the material from malicious actors. While many Member States may have transport safety regulations for radioactive materials, transport security regulatory development is still in its nascent stages globally. Trying to develop harmonized transport safety and transport security regulations could lead to challenges ranging from differences in terminology used in transport safety versus terminology uses in transport security, roles and responsibilities for the variety of stakeholders involved in transport, and finally, the possible role of multiple competent authorities in governing the transport of dangerous goods, which includes radioactive material. While the International Atomic Energy Agency (IAEA) is currently developing a process of a methodology for drafting transport security regulations, any process must address both safety considerations and security requirements. (As the most vulnerable part of the life cycle of radioactive materials, the need for harmonized transport safety/transport security regulations is essential.) This paper investigates the regulatory elements of the safety-security interface for nuclear and other radioactive material in transport. Examining challenges including use of terms, the role of multiple competent authorities, and practical challenges involved in the safe and secure transport of radioactive material, the paper analyzes the need for integrated regulatory development for the safe and secure transport of these materials.

Anderson, Kimberly↗
DOE OSTI2019

Inference of Crud Model Parameters from Plant Data

Over the past several years, the Virtual Environment forReactor Analysis, VERA, has provided a novel capability forthe Consortium for Advanced Simulation of Light Water Re-actors (CASL) to modelcrud-induced power shift (CIPS) inreactors operated by the Tennessee Valley Authority (TVA).While this developed capability in VERA is unique, multiplekey parameters in the crud physics have remained unknown.The methodology employed here provides the capability toinfer these key model parameters from measured plant data.Once the model parameters have been determined, a forwardVERA computation is performed and results are comparedto measured flux map data to determine the ecacy of thecalibrated crud model.

Collins, Benjamin↗