Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “value stacking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

AGC-4 Experiment Irradiation Monitoring Data Qualification Interim Report

The Graphite Technology Development Program is running a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The fourth experiment, Advanced Graphite Creep 4 (AGC 4), began with Advanced Test Reactor (ATR) cycle 157D on May 30, 2015, and has been irradiated for two cycles. The capsule was removed from the reactor after ATR cycle 158A, which ended on January 2, 2016, due to interference with another experiment. Irradiation will resume when the interfering experiment is removed from the reactor. This report documents qualification of AGC 4 experiment irradiation monitoring data for use by the Advanced Reactor Technologies (ART) Technology Development Office (TDO) Program for research and development activities required to design and license the first HTR nuclear plant. Qualified data meet the requirements for use as described in the experiment planning and quality assurance documents. Failed data do not meet the requirements and provide no useable information. Trend data may not meet all requirements, but still provide some useable information. Use of Trend data requires assessment of how any deficiencies affect a particular use of the data. All thermocouples (TCs) have functioned throughout the AGC-4 experiment. All temperature data are Qualified for use by the ART TDO Program. Argon, helium, and total gas flow data were within expected ranges and are Qualified for use by the ART TDO Program. Discharge gas line moisture values were consistently low during cycle 157D. At the start of cycle 158A, gas moisture briefly spiked to over 600 ppmv and then declined throughout the cycle. Moisture values are within the measurement range of the instrument and are Qualified for use by the ART TDO Program. Graphite creep specimens were subjected to one of three loads, 393, 491, or 589 lbf. For a brief period during cycle 157D between 12:19 on June 2, 2015 and 08:23 on June 11, 2015 the load cells were wired incorrectly resulting in missing stack load data. Missing stack loads were estimated from measured ram pressures using regression equations developed from the existing data from cycle 157D. Estimated stack loads during this period are considered to be an accurate representation of actual load applied to the stacks. These loads deviate slightly from the planned loads. This deviation does not prevent the data from being Qualified for use, but must be taken into account when analyzing the effect of load on creep. Stack displacement increased consistently throughout the first two cycles with total displacement ranging from 0.4 to 0.8 in. During ATR outages, a set of pneumatic rams raised the stacks of graphite creep specimens to ensure the specimens were not stuck within the test train. This stack raising was performed twice. All stacks were raised successfully each time. The load and displacement data are Qualified for use by the ART TDO Program.

36 MATERIALS SCIENCE↗

The Infrared Spectroscopy of Equilibrium Mixtures of Vapor-Phase Water and Hydrogen Fluoride

Hydrogen fluoride readily associates with water vapor in the air to form the H 2 O-HF complex, which has optical absorption properties that are different from those of unassociated hydrogen fluoride. Consequently, to accurately quantify the total amount of hydrogen fluoride coming from an industrial stack or vent, for example, requires that the complexed amount of hydrogen fluoride be accounted for. To do this, the equilibrium constant for the association reaction is needed. Using statistical mechanical methods, Adebayo and coworkers [Adebayo SLA, AC Legon and DJ Millen. 1991. J. Chem. Soc. Faraday Trans. 87:443-447.] made an estimate of this equilibrium constant based on measured and estimated spectroscopic values for the complex. This value is K eq = 84(18) but has never been confirmed experimentally. In the research described herein, we have measured the equilibrium constant for the formation of H 2 O-HF by monitoring the decrease in the infrared absorption features of water vapor and hydrogen fluoride in mixtures of these two vapors in a temperature-regulated cell. Our experimental values for K eq at 25 °C, based on the diminution of the water vapor and HF transitions, are 77(46) and 51(24), respectively. The decay of the spectral features continues long after (hours) the two vapors are mixed in the gas cell. This suggests that other reactions (the growth of a film of hydrofluoric acid, perhaps) are taking place. While the experimental results agree reasonably well with the calculated equilibrium value of Adebayo et al., further improvements in experimental and analysis techniques are needed to reduce the uncertainties in the experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A theoretical calculation of stacking fault energy of Ni alloys: The effects of temperature and composition

Combining cluster expansion (CE) method with one dimensional axial Ising model, this work investigated the effects of alloying elements and configurational variations due to temperature on the stacking fault energy (SFE) of FCC Ni binary alloys. Ensembles of large numbers of atomistic structures, each with more than ~400 atoms, were generated to consider sufficient long-range chemical disorder and temperature effects due to configurational entropy. Here, a Monte Carlo Metropolis algorithm was used to generate these structures, whose energies were then evaluated based on the effective cluster interactions obtained from CE. As a baseline, this work had shown the SFE of pure Ni and Al to be 127 mJ/m 2 and 137 mJ/m 2 , respectively, which agreed with the experimental values of 125 mJ/m 2 and 150 mJ/m 2 reported in the literature. Additions of Al, Ti, Cr and Co to pure Ni were found to decrease the SFE to different extents. Although temperature does not strongly influence the SFE of the FCC Ni-Al and Ni-Cr binary alloys, it can lead to significant changes to the SFE of the FCC Ni-Ti and Ni-Co alloys. While effects of temperature and composition on SFE observed in this work were calculated from binary Ni alloys, the general trends are nonetheless expected to be valid in the γ phase of multicomponent Ni superalloys.

36 MATERIALS SCIENCE↗

A STACKED ANALYSIS OF 115 PULSARS OBSERVED BY THE FERMI LAT

Due to the low gamma-ray fluxes from pulsars above 50 GeV and the small collecting area of space-based telescopes, the gamma-ray emission discovered by the Fermi Large Area Telescope (LAT) in ∼150 pulsars is largely unexplored at these energies. In this regime, the uncertainties on the spectral data points and/or the constraints from upper limits are not sufficient to provide robust tests of competing emission models in individual pulsars. The discovery of power-law-type emission from the Crab pulsar at energies exceeding 100 GeV provides a compelling justification for exploration of other pulsars at these energies. We applied the method of aperture photometry to measure pulsar emission spectra from Fermi-LAT data and present a stacked analysis of 115 pulsars selected from the Second Fermi-LAT catalog of gamma-ray pulsars. This analysis, which uses an average of ∼4.2 yr of data per pulsar, aggregates low-level emission which cannot be resolved in individual objects but can be detected in an ensemble. We find no significant stacked excess at energies above 50 GeV. An upper limit of 30% of the Crab pulsar level is found for the average flux from 115 pulsars in the 100–177 GeV energy range at the 95% confidence level. Stacked searches exclusive to the young pulsar sample, the millisecond pulsar sample, and several other promising sub-samples also return no significant excesses above 50 GeV.

79 ASTRONOMY AND ASTROPHYSICS↗

Fuel Age Impacts on Gaseous Fission Product Capture During Separations

As a result of fuel reprocessing, volatile radionuclides will be released from the facility stack if no processes are put in place to remove them. The radionuclides that are of concern in this document are 3 H, 14 C, 85 Kr, and 129 I. The question we attempt to answer is how efficient must this removal process be for each of these radionuclides? To answer this question, we examine the three regulations that may impact the degree to which these radionuclides must be reduced before process gases can be released from the facility. These regulations are 40 CFR 61 (EPA 2010a), 40 CFR 190(EPA 2010b), and 10 CFR 20 (NRC 2012), and they apply to the total radonuclide release and to the dose to a particular organ – the thyroid. Because these doses can be divided amongst all the radionuclides in different ways and even within the four radionuclides in question, several cases are studied. These cases consider for the four analyzed radionuclides inventories produced for three fuel types—pressurized water reactor uranium oxide (PWR UOX), pressurized water reactor mixed oxide (PWR MOX), and advanced high-temperature gas-cooled reactor (AHTGR)—several burnup values and time out of reactor extending to 200 y. Doses to the maximum exposed individual (MEI) are calculated with the EPA code CAP-88 (Rosnick 2007, 1992). Two dose cases are considered. The first case, perhaps unrealistic, assumes that all of the allowable dose is assigned to the volatile radionuclides. In lieu of this, for the second case a value of 10% of the allowable dose is arbitrarily selected to be assigned to the volatile radionuclides. The required decontamination factors (DFs) are calculated for both of these cases, including the case for the thyroid dose for which 14 C and 129 I are the main contributors. However, for completeness, for one fuel type and burnup, additional cases are provided, allowing 25% and 50% of the allowable dose to be assigned to the volatile radionuclides. Because 3 H and 85 Kr have relatively short half-lives, 12.3 y and 10.7 y, respectively, the dose decreases with the time from when the fuel is removed from the reactor to the time it is processed (herein “fuel age”). One possible strategy for limiting the discharges of these short halflife radionuclides is to allow the fuel to age to take advantage of radioactive decay. Therefore, the doses and required DFs are calculated as a function of fuel age. Here we calculate, given the above constraints and assumptions, the minimum ages for each fuel type that would not require additional effluent controls for the shorter half-life volatile radionuclides based on dose considerations. With respect to 129 I doses, we find that the highest dose is calculated with iodine as a fine particulate. The dose scales as the fraction of the total 129 I that is particulate. Therefore, we assume for all of our calculations that 100% of the 129 I is particulate and allow the user of the results given here to scale our calculated doses to their needs. To summarize the data given in the body and appendices of this report, we find that the principal isotopes of concern are 3 H and 129 I, the latter requiring the highest DFs. The maximum DF value for 129 I is 8000 for the illustrated cases. The required DF for 3 H could be as high as 720, depending on the age of the fuel processed. The DF for 85 Kr could be up to ~60, depending on fuel age. The DF for 14 C is in many cases 1 (no treatment required) but could be as high as 30. The DFs required are within the range of DFs that are reported for the capture technologies that are available for the volatile radionuclides. Achieving the required 129 I and 3 H DFs is more challenging. Variations in stack design and other design factors may also significantly impact the DF requirements.

carbon-14↗

Probing transport energies and defect states in organic semiconductors using energy resolved electrochemical impedance spectroscopy

Abstract Determining the relative energies of transport states in organic semiconductors is critical to understanding the properties of electronic devices and in designing device stacks. Futhermore, defect states are also highly important and can greatly impact material properties and device performance. Recently, energy‐resolved electrochemical impedance spectroscopy (ER‐EIS) is developed to probe both the ionization energy (IE) and electron affinity (EA) as well as sub‐bandgap defect states in organic semiconductors. Herein, ER‐EIS is compared to cyclic voltammetry (CV) and photoemission spectroscopies for extracting IE and EA values, and to photothermal deflection spectroscopy (PDS) for probing defect states in both polymer and molecular organic semiconductors. The results show that ER‐EIS determined IE and EA are in better agreement with photoemission spectroscopy measurements as compared to CV for both polymer and molecular materials. Furthermore, the defect states detected by ER‐EIS agree with sub‐bandgap features detected by PDS. Surprisingly, ER‐EIS measurements of regiorandom and regioregular poly(3‐hexylthiophene) (P3HT) show clear defect bands that occur at significantly different energies. In regioregular P3HT the defect band is near the edge of the occupied states while it is near the edge of the unoccupied states in regiorandom P3HT.

14 SOLAR ENERGY↗

Physical and optoelectronic characterization of reactively sputtered molybdenum-silicon-nitride alloy metal gate electrodes

With continued transistor scaling, work function tuning of metal gates has become important for advanced complementary-metal-oxide-silicon applications. The work function tuning of reactively sputtered Mo{sub x}Si{sub y}N{sub z} (also referred to as MoSiN) gates has been studied through the incorporation of nitrogen. The nitrogen concentration in the MoSiN films was altered by controlling the gas flow ratio, R{sub N}=N{sub 2}/(N{sub 2}+Ar), during gate deposition. The sheet resistance (R{sub s}) of blanket MoSiN films, measured using four-point resistance method, was found to increase as the gas flow ratio was varied from 10% to 40%. Current-voltage measurements confirmed excellent electrical stability of MoSiN/SiO{sub 2}/p-Si gate stack for applied electric fields ranging up to 6 MV/cm. High frequency capacitance-voltage measurements were used to extract the MoSiN work function ({phi}{sub m}) using the relationship between the flatband voltage (V{sub FB}) and the oxide thickness (t{sub ox}). The extracted MoSiN/SiO{sub 2} interfacial barrier heights, obtained through the internal photoemission of electrons, were used to corroborate the extracted values of MoSiN work function. The MoSiN work functions ({phi}{sub m}), extracted independently using both techniques, were consistent and were observed to decrease with increasing gas flow ratio [N{sub 2}/(N{sub 2}+Ar)]. Secondary ion mass spectrometry depth analysis revealed uniform distribution of nitrogen throughout the bulk MoSiN films, with no piling up at gate-dielectric interface. X-ray photoelectron spectroscopy surface analysis suggested a steady increase in the Mo-N bonds, and therefore the total nitrogen concentration (from {approx}20% to 32%), as the gas flow ratio is increased from 10% to 40%. A similar trend was observed in the nitrogen concentration (in percent), measured using Rutherford backscattering spectroscopy, for these gate deposition conditions. These material characterization results demonstrate that the increase in nitrogen concentration in MoSiN films is consistent with the lowering of MoSiN work function. Moreover, the work function of reactively sputtered Mo{sub x}Si{sub y}N{sub z} films was found to be variable over {approx}0.3 eV by adjusting the nitrogen concentration.

36 MATERIALS SCIENCE↗

Thermoelectric conversion via laser-induced voltage in highly textured polycrystalline Na{sub x}CoO{sub 2} ceramic

We have studied and analyzed the laser-induced voltage effect in highly c-axis-oriented polycrystalline Na{sub x}CoO{sub 2}. The textured and layered stacking Na{sub x}CoO{sub 2} (x {approx} 0.7) bulks were prepared by a solid-state reaction process. Under the irradiation on Na{sub 0.67}CoO{sub 2} bulk surface with pulsed laser ({lambda} = 248 nm), the induced voltage signals were observed on the inclined surface with rise time 30 ns-43 ns and peak voltage 200 mV-500 mV; the voltage peak values show a linear dependence of laser energy densities. The crystal grains orientation plays a critical role in voltage peak value whether in film or texture bulk. The transverse voltage signal brings the information of thermoelectric anisotropy. In Na{sub x}CoO{sub 2} band structure, the Fermi surface is different in the ab plane and along the c axis, leading to anisotropy of Seebeck coefficient. Additionally, the artificial structure of the inclined surface for highly textured bulk enables us to obtain a transverse voltage on inclined surface. These results demonstrated the layered textured bulk has potential applications in waste-heat conversion via transverse thermoelectric effect.

36 MATERIALS SCIENCE↗

Half‐Fused Diketopyrrolopyrrole‐Based Conjugated Donor–Acceptor Polymer for Ambipolar Field‐Effect Transistors

Abstract A novel building block, denoted as half‐fused diketopyrrolopyrrole (DPP) (9‐(3‐octadecylhenicosyl)‐8‐(thiophen‐2‐yl)‐7 H ‐pyrrolo[3,4‐ a ]thieno[3,2‐ g ]indolizine‐7,10(9 H )‐dione), in which one of the flanking thiophene units is fused to one of the DPP rings via a carbon‐carbon double bond at the N‐position is reported. The half‐fused DPP is successfully utilized as an electron acceptor to prepare the conjugated donor–acceptor polymer PTFDFT , which exhibits ambipolar semiconducting behavior in ambient air. Theoretical calculations and absorption spectral studies show that the backbone of PTFDFT is more planar compared to the reference polymer with conventional DPP units. As a result, PTFDFT shows a narrow bandgap and low lowest unoccupied molecular orbital level. The more planar backbone with fewer side chains favors the dense packing of the polymer chains of PTFDFT with a short π–π stacking distance (3.49 Å). Grazing‐incidence wide‐angle X‐ray scattering data further confirm the predominant edge‐on packing mode of the PTFDFT polymer chains on the substrate. As expected, the PTFDFT thin film shows excellent ambipolar semiconducting properties under ambient conditions, reaching 2.23 and 1.08 cm 2 V −1 s −1 for the n‐ and p‐channels, respectively. In addition, complementary‐like inverter with gain value as high as 141 is successfully constructed using the PTFDFT thin film.

Shi, Dandan↗

Allocating Reserves in Active Distribution Systems for Tertiary Frequency Regulation

This paper proposes a cooperative game theory-based approach for reserve optimization to enable distributed energy resources (DERs) participate in tertiary frequency regulation. Tertiary frequency regulation schemes ensure that reserve requirements of primary and secondary frequency regulation are fulfilled with a minimum cost. While the available reserve from a single distribution system may not suffice tertiary frequency regulation, stacked reserve from several distribution systems can enable them participate in tertiary frequency regulation at scale. In this paper, a two-stage strategy is proposed to effectively and precisely allocate spinning reserve requirement from each DER in distribution systems. In the first stage, two types of characteristic functions are computed: worthiness index (WI) and power loss reduction (PLR). In the second stage, the equivalent Shapley values are computed based on the characteristic functions, which are used to determine distribution factors for reserve allocation among DERs. The effectiveness of the proposed method for allocating reserves among DERs is demonstrated through several case studies on modified versions of the IEEE 13-node and 33-node distribution systems.

Gautam, Mukesh↗

Fully Integrated Applications of Thin Films on Low Temperature Cofired Ceramic (LTCC)

Thin film multilayers have previously been introduced on multilayer low temperature cofired ceramic (LTCC), as well as initial thin film capacitors on LTCC. The ruggedness of a multipurpose Ti-Cu-Pt-Au stack for connectivity and RF conductivity has continued to benefit fabrication and reliability in state of-the-art modules, while the capacitors have followed the traditional Metal-Insulator-Metal (MIM) style. The full integration of thin film passives with thin film connectivity traces is presented. Certain passives, such as capacitors, require specifically tailored and separately patterned thin film (multi-)layers, including a dielectric. Different capacitance values are achieved by variation of both the insulator layer thickness and the active area of the capacitor. Other passives, such as filters, require only the conductor - a single thin film multilayer. This can be patterned from the same connectivity thin film material (Ti-Cu-Pt-Au), or a specially tailored thin film material (e.g. Ti-Cu-Au) can be deposited. Both versions are described, including process and integration details. Examples are discussed, ranging from patterning for maximum tolerances, to space and performance-optimized designs. Cross-sectional issues associated with integration are also highlighted in the discussion.

36 MATERIALS SCIENCE↗

Molecular Dynamics Simulations of the Adsorption of Phthalate Esters on Smectite Clay Surfaces

The partitioning of organic contaminants between water and solid surfaces is a key process controlling their fate and transport in natural environments. A novel methodology was developed to predict the adsorption of organic contaminants by smectite clay minerals (high specific surface area adsorbents abundant in natural soils) using molecular dynamics (MD) simulations. The methodology models a stack of flexible Ca- montmorillonite lamellae in direct contact with a bulk aqueous reservoir and uses the metadynamics technique to facilitate the exploration of the free energy landscape. The methodology was tested and validated in the case of six phthalate esters, widely used chemical plasticizers with endocrine disrupting properties. Simulation predictions reveal strong phthalate adsorption, especially for the larger and more hydrophobic phthalates. Predicted partition coefficients (K d values) are consistent with collected batch experimental data. Adsorption was observed on both the exterior basal surfaces and within the interlayer nanopore, with phthalate molecules predominately adopting a flat orientation on the clay surface. Intercalation was also detected in complementary X-ray diffraction (XRD) experiments. A strong inverse relationship between extent of adsorption and clay surface charge density was observed, as phthalate molecules preferentially occupied the more hydrophobic uncharged patches on each surface. Detailed analysis of the free energy of adsorption revealed that phthalate affinity for the clay surface results from a small favorable van der Waals contribution and a large favorable entropic contribution. Overall, this research demonstrates the substantial affinity of smectite clays for phthalate esters and establishes a computational methodology capable of predicting the water-clay partition coefficients of organic contaminants, a key parameter in environmental fate and transport models.

36 MATERIALS SCIENCE↗

Compact Ceramic Microchannel Heat Exchangers

The objective of the proposed work was to demonstrate the feasibility of a step change in power plant efficiency at a commercially viable cost, by obtaining performance data for prototype, compact, ceramic microchannel heat exchangers. By performing the tasks described in the initial proposal, all of the milestones were met. The work performed will advance the technology from Technology Readiness Level 3 (TRL 3) to Technology Readiness Level 4 (TRL 4) and validate the potential of using these heat exchangers for enabling high efficiency solid oxide fuel cell (SOFC) or high-temperature turbine-based power plants. The attached report will describe how this objective was met. In collaboration with The Colorado School of Mines (CSM), specifications were developed for a high temperature heat exchanger for three commercial microturbines. Microturbines were selected because they are a more mature commercial technology than SOFC, they are a low-volume and high-value target for market entry of high-temperature heat exchangers, and they are essentially scaled-down versions of turbines used in utility-scale power plants. Using these specifications, microchannel dimensions were selected to meet the performance requirements. Ceramic plates were fabricated with microchannels of these dimensions. The plates were tested at room temperature and elevated temperature. Plates were joined together to make modular, heat exchanger stacks that were tested at a variety of temperatures and flow rates. Although gas flow rates equivalent to those in microturbines could not be achieved in the laboratory environment, the results showed expected efficiencies, robust operation under significant temperature gradients at high temperature, and the ability to cycle the stacks. Details of the methods and results are presented in this final report.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

CO 2 to Fuels Through Novel Electrochemical Catalysis (Final Report)

Electrochemical upgrading of CO 2 into hydrocarbon fuels via CO 2 –H 2 O co-electrolysis using solid oxide electrolysis cells (SOECs) presents an encouraging approach to cost-effective storage of renewable power. In this study, we harness the unique property of protonic ceramic electrolysis cells (PCEC) and demonstrate direct electro-catalytic production of CH 4 from CO 2 –H 2 O in a unit-cell stack configuration. The unit-cell stack was developed to evaluate the scalability and the applicability of PCECs from a broader system-level viewpoint. Tradeoffs between operating conditions and performance metrics were explored and thoroughly characterized. An exceptional CH 4 -yield ratio of 34.6% from only CO 2 –H 2 O reactants was achieved under an electrolysis current of 1 A cm –2 at 450 °C. With exhaust-H 2 recycle, this value was boosted to greater than 70%. In addition, the electrochemical co-conversion of CO 2 –H 2 O offers a higher CH 4 -yield ratio compared to traditional thermo-catalytic conversion of CO 2 –H 2 under certain operating conditions, indicating possible electrochemical promotion of catalytic CO 2 methanation. The demonstrated good performance is a promising result for further scale-up and for the practical utilization of electrochemical CO 2 upgrade using PCECs. Techno-economic analyses reveal operating conditions that yield cost-competitive levelized cost of fuel production.

01 COAL, LIGNITE, AND PEAT↗

CSB-RNN: A Faster-Than-Realtime RNN Acceleration Framework with Compressed Structured Blocks

Recurrent Neural Networks (RNN) is widely applied to temporal sequence analysis, where real-time performance is usually in demand. However, RNN suffers a heavy computational workload as the model comes with a large weight matrix. To alleviate the pain, model compression (pruning) schemes have been proposed for RNN that pruning the redundant (near-zero) weight-values. On the one hand, the non-structured pruning methods achieve a considerable pruning rate while bringing the computational irregularity, which is un-friendly to parallel-hardware. On the other hand, the existing structured pruning methods consider the hardware parallelism; However, they suffer a poor pruning rate due to the restrict constraints on pruning structure. This paper presents CSB-RNN, an optimized full-stack RNN framework with the novel compressed structured block (CSB) technique. The CSB-pruned RNN model comes with both fine-granularity that benefits the pruning rate and regular structure that facilitates the hardware-parallelism. Further, we propose a novel hardware architecture for inferencing the CSB-pruned model. Different from conventional parallel hardware, this architecture solves the block-workload imbalance issue and achieves an over 95% hardware utilization. With the experiments on 10 RNN models in 5 application domains, the CSB-RNN realizes 7×-20× lossless compression and up to 50× acceptable lossy-compression, which is 2×-7× to the prior art. With the addition of the novel hardware, the compressed-RNN inference reaches a super real-time latency of 10-400µs with FPGA implementation.

Shi, Runbin↗

Performance and cost of fuel cells for off-road heavy-duty vehicles

Hydrogen fuel cell-powered off-road vehicles can replace hydrocarbon-powered off-road vehicles to reduce carbon dioxide and criteria pollutant emissions in the agriculture, construction, and mining industries. Vehicle manufacturers and customers recognize health and environmental benefits of emissions reductions but are ultimately compelled by the total cost of ownership of their vehicles. In this study, we conduct a technoeconomic evaluation for three hallmark off-road vehicles, tractors, wheel loaders, and excavators, comparing vehicles with hydrogen fuel cell + battery hybrid powertrains to traditional diesel powertrains. Stakeholder-valued performance metrics include fuel cell engine power, engine durability, hydrogen consumption rate, hydrogen storage system volume, and energy-regenerative drivetrain efficiency. The total cost of ownership includes capital, operating and maintenance, fuel, and fuel storage costs. State-of-the-art fuel cell powered wheel loaders and excavators are currently cost competitive with diesel platforms. If targeted improvements to cost, performance, and durability improvements of fuel cell stacks and storage systems are achieved, fuel cell systems would be cost competitive for tractors and significantly lower total cost of ownership options for wheel loaders and excavators.

33 ADVANCED PROPULSION SYSTEMS↗

Sequence-dependent self-assembly of supramolecular nanofibers in periodic dynamic block copolymers

Block copolymers (BCPs) can spontaneously self-assemble into various nanostructured morphologies which enable their diverse applications in selective membranes, polymer electrolytes, and optoelectronics. To expand the range of nanostructures accessible to block copolymers, we designed dynamic block copolymers (DBCPs) that combine the phase separation of traditional block copolymers with the supramolecular self-assembly of periodic dynamic polymers. We demonstrate that DBCPs synthesized with a periodic block sequence self-assemble into high aspect ratio supramolecular nanofibers with well-ordered PEG and PDMS domains, in contrast to those synthesized with a random sequence which do not form nanofibers but have disordered morphologies. The periodicity of the block sequence ensures regular placement of dynamic bonds along the polymer chain, which enables stacking of the hydrogen bonding units into ordered 1D supramolecular nanofibers and delays the onset of terminal flow by up to 60 °C compared to the random block sequence. The hierarchically assembled supramolecular nanofibers display complex mechanical and thermal phase behavior arising from the interplay between phase separation of the dissimilar polymer backbones and supramolecular interactions between dynamic bonds. Despite identical bulk composition, the periodic DBCPs demonstrate ionic conductivity values over two orders of magnitude higher than their random counterparts due to the formation of well-ordered, interconnected, high aspect ratio ion-transporting PEG domains. In conclusion, these results highlight the potential for DBCPs as an emerging material platform to achieve advanced, self-assembled nanostructured morphologies.

36 MATERIALS SCIENCE↗

Magnetic and ferroelectric orders in strained Gd{sub 1/2}Na{sub 1/2}TiO{sub 3}: First-principles calculations

The emergent magnetic and ferroelectric orders in A-site ordered Gd{sub 1/2}Na{sub 1/2}TiO{sub 3} under lattice strain are investigated using the first-principles calculations. It is revealed that the lattice prefers the perovskite structure with alternatively stacked Ga-O and Na-O layers along the b-axis and the ground spin state favors the G-type antiferromagnetic (G-AFM) order. The ac-plane biaxial strain can remarkably tune the amplitude of ferroelectric polarization, while the G-AFM spin structure is robustly unaffected. The ±4% strains can trigger the change of polarization up to ±50% relative to the polarization value of unstrained structure. The present work suggests a possible scenario to control emergent multiferroic behaviors in Gd{sub 1/2}Na{sub 1/2}TiO{sub 3} via lattice strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗