Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Edge-Controlled Mechanical Failure of Si and SiC Semiconductor Chips

Silicon (Si) and silicon carbide (SiC) semiconductor chips are subjected to thermal gradients during service, have coefficient of thermal expansion mismatches with the constituents they are attached to, and are therefore subjected to thermomechanical tensile stresses that can initiate their fracture. Because of inherent brittleness, their probabilistic (Weibull) tensile failure strength was examined to understand sustainable tensile stresses and any exhibition of strength-size-scaling. Failure stress testing of entire (10-mm-square) chips was conducted using uniaxial flexure (3-point-bending) and biaxial flexure (anticlastic bending). The advantage of the anticlastic bend test is all eight primary edges are subjected to identical sinusoidal stress distribution so tensile failure stress is concurrently sensitive to edge-state quality, surface-state quality, crystallographic orientation, and any strength anisotropies of any of those. Tensile stress tolerance of both Si and SiC chips was limited by extrinsic strength-limiting flaws located at their edges and on lapped surfaces too in the case of the Si. Both materials exhibited strength-size scaling; namely, a larger chip is likely to fail at a lower tensile stress. The anticlastic bend test method was effective for evaluating edge failure stress provided surface-type strength-limiting flaws were not dominant. Edge-strength anisotropy (i.e., crystallographic orientation dependence) was observed with both the Si and SiC chips. Surface-strength anisotropy also occurred with Si chips because one side was lapped and the other polished. Lastly, the SiC chips failed at much higher tensile stresses than Si chips; however, that strength difference could be a ramification of differences in edge-slicing quality and not necessarily from intrinsic material differences.

36 MATERIALS SCIENCE↗

The Effects of Aging on the Luminescence of PEG-Coated Water-Soluble ZnO Nanoparticles Solutions

Water-soluble ZnOnanoparticles coated with polyethylene glycol biscarboxymethyl (PEG(COOH)2)were prepared in ethanol/water solutions. The ZnOnanoparticles have a hexagonal structure with an average size of 10 nm. Three different luminescence bands are observed from the nanoparticle solutions: green emission at 530 nm from surface states or defects, UV emission at 380 nm from the ZnOexcitons, and an emission band at around 338 nm from the PEG(COOH)2. The fresh as-prepared samples have very strong green emission at 530 nm from surface states or defects but very weak excitonic emission at 380 nm. After dilution with ethanol, the green emission decreases in intensity and the excitonic emission increases. In the diluted samples, the excitonic luminescence intensity increases with storage time. This intensity increase is attributed to surface passivation by CH3COO-ligands resulting from precursor reactions in the ethanol solvent.

36 MATERIALS SCIENCE↗

Land Surface Modeling and Data Assimilation to Support Physical Precipitation Retrievals for GPM

Objective: The objective of this proposal is to provide a routine land surface modeling and data assimilation capability for GPM in order to provide global land surface states that are necessary to support physical precipitation retrieval algorithms over land. It is well-known that surface emission, particularly over the range of frequencies to be included in GPM, is sensitive to land surface states, including soil properties, vegetation type and greenness, soil moisture, surface temperature, and snow cover, density, and grain size. Therefore, providing a robust capability to routinely provide these critical land states is essential to support GPM-era physical retrieval algorithms over land.

Peters-Lidard, Christa D.↗

Investigation of surface defect states in CeO{sub 2-y} nanocrystals by Scanning−tunneling microscopy/spectroscopy and ellipsometry

Synthesis process strongly influences the nanocrystalline CeO{sub 2-y} defective structure. The presence of surface defects, in the form of oxygen vacancies in different charge states (F centers), can change the electronic properties of ceria nanocrystals. Nanocrystalline CeO{sub 2-y} samples were synthesized using three different methods (precipitation, self-propagating room temperature, and hydrothermal synthesis). Raman spectroscopy was used to identify the presence of oxygen vacancies which presumably were formed at the nanoparticle surface. The defect concentration depended on the crystallite size of differently prepared CeO{sub 2-y} samples. Scanning tunneling microscopy/spectroscopy and ellipsometry were employed to investigate the electronic band structure of defective CeO{sub 2-y} nanocrystals. Scanning tunneling spectroscopy measurements demonstrated that inside the band gap of CeO{sub 2-y} nanocrystals, besides the filled 4 f states, appeared additional states which were related to occupied and empty F center defect states. From the ellipsometric measurements, using the critical points model, the energy positions of different F centers states and the values of the reduced band gap energies were determined. The analysis of obtained data pointed out that depending on the synthesis method, different types of F centers (F{sup +} and F{sup 0}) can be formed in the CeO{sub 2-y} nanocrystals. The formation of different F center defect states inside the ceria gap have a strong impact on the electrical, optical, and magnetic properties of ceria nanocrystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Topological crystalline insulator nanomembrane with strain-tunable band gap

The ability to fine-tune band gap and band inversion in topological materials is highly enticing for the development of novel functional devices. In this work we propose that the electronic properties of free-standing nanomembranes of the topological crystalline insulators (TCI) SnTe and Pb1–x Sn x (Se,Te) are highly tunable by engineering elastic strain and membrane thickness, resulting in tunable band gap and giant piezoconductivity. Membrane thickness governs the hybridization of topological electronic states on opposite surfaces, while elastic strain can further modulate the hybridization strength by controlling the penetration length of surface states. We introduce a frequency-resolved infrared photodetector using force-concentration induced inhomogeneous elastic strain in TCI nanomembranes with spatially varying width. The predicted tunable band gap accompanied by strong spin-textured electronic states will open new avenues for fabricating piezoresistive devices, infrared detectors and energy-efficient electronic and spintronic devices based on TCI nanomembrane.

36 MATERIALS SCIENCE↗

Topological nodal-line fermions in spin-orbit metal PbTaSe2

Here we discuss how topological semimetals can support one-dimensional Fermi lines or zero-dimensional Weyl points in momentum space, where the valence and conduction bands touch. While the degeneracy points in Weyl semimetals are robust against any perturbation that preserves translational symmetry, nodal lines require protection by additional crystalline symmetries such as mirror reflection. Here we report, based on a systematic theoretical study and a detailed experimental characterization, the existence of topological nodal-line states in the non-centrosymmetric compound PbTaSe 2 with strong spin-orbit coupling. Remarkably, the spin-orbit nodal lines in PbTaSe 2 are not only protected by the reflection symmetry but also characterized by an integer topological invariant. Our detailed angle-resolved photoemission measurements, first-principles simulations and theoretical topological analysis illustrate the physical mechanism underlying the formation of the topological nodal-line states and associated surface states for the first time, thus paving the way towards exploring the exotic properties of the topological nodal-line fermions in condensed matter systems.

36 MATERIALS SCIENCE↗

Weyl, Dirac and high-fold chiral fermions in topological quantum matter

Quantum materials hosting Weyl fermions have opened a new era of research in condensed matter physics. First proposed in 1929 in the context of particle physics, Weyl fermions have yet to be observed as elementary particles. In 2015, Weyl fermions were detected as collective electronic excitations in the strong spin–orbit coupled material tantalum arsenide, TaAs. This discovery was followed by a flurry of experimental and theoretical explorations of Weyl phenomena in materials. Weyl materials naturally lend themselves to the exploration of the topological index associated with Weyl fermions and their divergent Berry curvature field, as well as the topological bulk–boundary correspondence, giving rise to protected conducting surface states. Here, we review the broader class of Weyl topological phenomena in materials, starting with the observation of emergent Weyl fermions in the bulk and Fermi arc states on the surface of the TaAs family of crystals by photoemission spectroscopy. We then discuss several exotic optical and magnetic responses observed in these materials, as well as progress in developing related chiral materials. We discuss the conceptual development of high-fold chiral fermions, which generalize Weyl fermions, and we review the observation of high-fold chiral fermion phases by taking the rhodium silicide, RhSi, family of crystals as a prime example. Lastly, we discuss recent advances in Weyl line phases in magnetic topological materials. With this Review, we aim to provide an introduction to the basic concepts underlying Weyl physics in condensed matter, and to representative materials and their electronic structures and topology as revealed by spectroscopic studies. Finally, we hope this work serves as a guide for future theoretical and experimental explorations of chiral fermions and related topological quantum systems with potentially enhanced functionalities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin splitting of dopant edge state in magnetic zigzag graphene nanoribbons

Spin-ordered electronic states in hydrogen-terminated zigzag nanographene give rise to magnetic quantum phenomena that have sparked renewed interest in carbon-based spintronics. Zigzag graphene nanoribbons (ZGNRs)-quasi one-dimensional semiconducting strips of graphene bounded by parallel zigzag edges-host intrinsic electronic edge states that are ferromagnetically ordered along the edges of the ribbon and antiferromagnetically coupled across its width. Despite recent advances in the bottom-up synthesis of GNRs featuring symmetry protected topological phases and even metallic zero mode bands, the unique magnetic edge structure of ZGNRs has long been obscured from direct observation by a strong hybridization of the zigzag edge states with the surface states of the underlying support. Here, we present a general technique to thermodynamically stabilize and electronically decouple the highly reactive spin-polarized edge states by introducing a superlattice of substitutional N-atom dopants along the edges of a ZGNR. First-principles GW calculations and scanning tunnelling spectroscopy reveal a giant spin splitting of low-lying nitrogen lone-pair flat bands by an exchange field (~850 tesla) induced by the ferromagnetically ordered edge states of ZGNRs. Finally, our findings directly corroborate the nature of the predicted emergent magnetic order in ZGNRs and provide a robust platform for their exploration and functional integration into nanoscale sensing and logic devices.

36 MATERIALS SCIENCE↗

Temperature and doping dependent changes in surface recombination during UV illumination of (Al)GaN bulk layers

We have studied the effect of continuous illumination with above band gap energy on the emission intensity of polar (Al)GaN bulk layers during the photoluminescence experiments. A temporal change in emission intensity on time scales from seconds to hours is based on the modification of the semiconductor surface states and the surface recombination by the incident light. The temporal behavior of the photoluminescence intensity varies with the parameters such as ambient atmosphere, pretreatment of the surface, doping density, threading dislocation density, excitation power density, and sample temperature. By means of temperature-dependent photoluminescence measurements, we observed that at least two different processes at the semiconductor surface affect the non-radiative surface recombination during illumination. The first process leads to an irreversible decrease in photoluminescence intensity and is dominant around room temperature, and the second process leads to a delayed increase in intensity and becomes dominant around T = 150–200 K. Both processes become slower when the sample temperature decreases from room temperature. They cease for T < 150 K. Stable photoluminescence intensity at arbitrary sample temperature was obtained by passivating the analyzed layer with an epitaxially grown AlN cap layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Visualization of an axion insulating state at the transition between 2 chiral quantum anomalous Hall states

Quantum-relativistic materials often host electronic phenomena with exotic spatial distributions. In particular, quantum anomalous Hall (QAH) insulators feature topological boundary currents whose chirality is determined by the magnetization orientation. However, understanding the microscopic nature of edge vs. bulk currents has remained a challenge due to the emergence of multidomain states at the phase transitions. Here we use microwave impedance microscopy (MIM) to directly image chiral edge currents and phase transitions in a magnetic topological insulator. Our images reveal a dramatic change in the edge state structure and an unexpected microwave response at the topological phase transition between the Chern number N = 1 and N = - 1 states, consistent with the emergence of an insulating N = 0 state. The magnetic transition width is independent of film thickness, but the transition pattern is distinct in differently initiated field sweeps. This behavior suggests that the N = 0 state has 2 surface states with Hall conductivities of 1 2 e 2 / h but with opposite signs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear nanoelectrodynamics of a Weyl metal

Chiral Weyl fermions with linear energy-momentum dispersion in the bulk accompanied by Fermi-arc states on the surfaces prompt a host of enticing optical effects. While new Weyl semimetal materials keep emerging, the available optical probes are limited. In particular, isolating bulk and surface electrodynamics in Weyl conductors remains a challenge. We devised an approach to the problem based on near-field photocurrent imaging at the nanoscale and applied this technique to a prototypical Weyl semimetal TaIrTe 4 . As a first step, we visualized nano-photocurrent patterns in real space and demonstrated their connection to bulk nonlinear conductivity tensors through extensive modeling augmented with density functional theory calculations. Notably, our nanoscale probe gives access to not only the in-plane but also the out-of-plane electric fields so that it is feasible to interrogate all allowed nonlinear tensors including those that remained dormant in conventional far-field optics. Surface- and bulk-related nonlinear contributions are distinguished through their “symmetry fingerprints” in the photocurrent maps. Robust photocurrents also appear at mirror-symmetry breaking edges of TaIrTe 4 single crystals that we assign to nonlinear conductivity tensors forbidden in the bulk. Here, nano-photocurrent spectroscopy at the boundary reveals a strong resonance structure absent in the interior of the sample, providing evidence for elusive surface states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical Manipulation and Detection of Emergent Phenomena in Topological Insulators

The three-dimensional topological insulator (TI) is a new quantum phase of matter that exhibits quantum-Hall-like properties, even in the absence of an external magnetic field. These materials are insulators in the bulk but have a topologically protected conducting state at the surface. Charge carriers on these surface states behave like a two-dimensional gas of massless helical Dirac fermions for which the spin is ideally locked perpendicular to the momentum. The purpose of this project is to probe the unique collective electronic behaviors of topological insulators by developing and using advanced time resolved spectroscopic techniques with state-of-the-art temporal and spatial resolutions. The nature of these materials requires development of specialized ultrafast techniques (such as time resolved ARPES that also has spin detection capability, ultrafast electron diffraction that has sub-100 fs time resolution and THz magneto-spectroscopy). The focus of this report is to detail our achievements in terms of establishing state of the art experimental facilities. Below, we will describe achievements under this award for the entire duration of five years. We will focus on detailing the development of ultrafast technqiues here. The details of the science that was done with these technqiues can be found in the publications referencing this grant.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-efficiency silicon solar cells

Fabrication and characterization of high-efficiency metal insulator, n-p (MINP) cells is described. Particular attention was paid to development of measurement methods for surface recombination and density of surface states. A modified Rosier test structure was used successfully for density of surface states. Silicon oxide and silicon nitride passivants were studied. Heat treatment after plasma enhanced chemical vapor deposition (CVD) of silicon nitride was shown to be beneficial. A more optimum emitter concentration profile was modeled.

Olsen, L. C.↗

Surface characterization of InP using photoluminescence

Photoluminescence (PL) measurements have been performed on InP samples in situ during various surface treatments including chemical etching, wet anodization, and low-pressure chemical vapor deposition. It was found, in agreement with previously published results, that the magnitude of the PL signal varies markedly with surface treatment due presumably to changes in either surface-state density, and/or surface potential. In an attempt to assess the effectiveness of this noninvasive method as a tool for characterizing and monitoring the progressive development of a semiconductor surface during processing, a number of experiments on InP have been performed. The results indicate that although some uncertainty may exist in assigning a mechanism for the PL change in any given experiment, the general trend appears to be that surface degradation results in a reduced signal. As a result, process steps which enhance the PL intensity are likely to be beneficial in the preparation of a high-quality interface.

Chang, R. R.↗

Direct control and characterization of a Schottky barrier by scanning tunneling microscopy

Scanning tunneling microscopy (STM) methods are used to directly control the barrier height of a metal tunnel tip-semiconductor tunnel junction. Barrier behavior is measured by tunnel current-voltage spectroscopy and compared to theory. A unique surface preparation method is used to prepare a low surface state density Si surface. Control of band bending with this method enables STM investigation of semiconductor subsurface properties.

Bell, L. D.↗

Documentation for Program SOILSIM: A computer program for the simulation of heat and moisture flow in soils and between soils, canopy and atmosphere

SOILSIM, a digital model of energy and moisture fluxes in the soil and above the soil surface, is presented. It simulates the time evolution of soil temperature and moisture, temperature of the soil surface and plant canopy the above surface, and the fluxes of sensible and latent heat into the atmosphere in response to surface weather conditions. The model is driven by simple weather observations including wind speed, air temperature, air humidity, and incident radiation. The model intended to be useful in conjunction with remotely sensed information of the land surface state, such as surface brightness temperature and soil moisture, for computing wide area evapotranspiration.

Field, Richard T.↗

Coherent States on Riemann Surfaces as m-Photon States

Coherent states on the m-sheeted sphere (for the SU(2) group) are used to define analytic representations. The corresponding generators create and annihilate clusters of m-photons. Non-linear Hamiltonians that contain these generators are considered and their eigenvectors and eigenvalues are explicitly calculated. The Holstein-Primakoff and Schwinger formalisms in this context are also discussed.

Vourdas, A.↗

Enhanced Room-Temperature Ferromagnetism Observed in SiO{sub 2}-Coated CuO Nanostructures

In this paper, the magnetic properties of pure CuO and SiO{sub 2}-coated CuO nanocrystals were reported. Strongly enhanced room-temperature ferromagnetism was observed in SiO{sub 2}-coated CuO nanocrystals, whose saturation magnetization is two orders of magnitude enhanced compared to that of the uncoated CuO nanocrystals. The mechanism of this enhancement was investigated. It points out the main origin of ferromagnetism in these CuO nanocrystals is the uncompensated surface state, so that the coating of SiO{sub 2} can effectively protect the surface state to improve the ferromagnetism in these CuO nanocrystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗