Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural rings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

An instability in planetary rings due to ballistic transport

Ballistic transport in planetary rings is the net radial transport of mass and angular momentum due to exchanges of meteoroid impact ejecta between neighboring ring regions. The detailed linear stability analysis in this paper demonstrates that ballistic transport causes wavelike disturbances to grow and propagate in an otherwise uniform ring. The growth is strongest for intermediate values of the normal ring optical depth tau = 0.1 to 1.0 and goes to zero as tau approaches 0 and tau approaches infinity. For nominal values of various physical parameters, the minimum e-folding time is approximately 10(exp 5) years for tau approximately 0.4. The direction of propagation is opposite to the sense of any asymmetry that may exist in the ejecta direction distribution (inward for prograde ejecta and outward for retrograde ejecta). The additional effect of viscous transport tends to damp wavelike perturbations strongly at short wavelengths and at high values of tau. The quantitative agreement between this analytic work and numerical simulations reported elsewhere is generally quite good. As applied to Saturn's rings, the results in this paper strengthen the earlier conclusion from numerical calculations that the 100-km structure in the inner B Ring is caused by ballistic transport. However, it is also clear that ballistic transport cannot produce the complex structure seen in the outer two-thirds of the B Ring where tau greater than or approximately 1.5. Wavelike structures in the C Ring might also be attributed to ballistic transport; but this requires further study.

Durisen, Richard H.↗
DOE OSTI2022

Tuning the Mechanical and Electric Properties of Conjugated Polymer Semiconductors: Side–Chain Design Based on Asymmetric Benzodithiophene Building Blocks

Understanding molecular design rules for stretchable polymer semiconductors is important for enabling next generation stretchable electronic circuits. To simultaneously improve both electrical properties and mechanical stretchability, a design strategy is reported in introducing conjugated rigid fused-rings with bulky side groups in semiconducting polymers. In this work, the understanding of this design concept is improved by systematically investigating the effect of different types of bulky side groups asymmetrically substituted on conjugated polymer semiconductor backbones. Specifically, four types of side groups are investigated, including naphthalene (NaPh), biphenyl (PhPh), thienylphenyl (ThPh), and alkylphenyl (C4Ph), asymmetrically substituted on benzodithiophene units, namely asy-BDT. With the four types of side groups installed on BDT-containing conjugated polymers in an asymmetrical fashion, it is observed that they reduced the polymer chain aggregation and film crystallinity, hence improving the film stretchability. Furthermore, the fully conjugated polymer back-bone allows maintenance of good charge carrier mobilities. Specifically, polymer PDPP-C4Ph (with C4Ph side groups) shows the highest mobility in the fully stretchable transistor and maintained its mobility even after being subjected to hundreds of stretching-releasing cycles at 25% strain. Altogether, the results provide anunderstanding of the use of asymmetrically substituted fused-ring conjugated polymer structures to tune mechanical and charge transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pseudoknot length modulates the folding, conformational dynamics, and robustness of Xrn1 resistance of flaviviral xrRNAs

To understand how RNA dynamics is regulated and connected to its function, we investigate the folding, conformational dynamics and robustness of Xrn1 resistance of a set of flaviviral xrRNAs using SAXS, smFRET and in vitro enzymatic assay. Flaviviral xrRNAs form discrete ring-like 3D structures, in which the length of a conserved longrange pseudoknot (PK2) ranges from 2 bp to 7 bp. We find that xrRNAs’ folding, conformational dynamics and Xrn1 resistance are strongly correlated and highly Mg 2+ - dependent, furthermore, the Mg 2+ -dependence is modulated by PK2 length variations. xrRNAs with long PK2 require less Mg 2+ to stabilize its folding, exhibits reduced conformational dynamics and strong Xrn1 resistance even at low Mg 2+ , and tolerates mutations at key tertiary motifs at high Mg 2+ , which generally are destructive to xrRNAs with short PK2. These results demonstrate an unusual regulatory mechanism of RNA dynamics providing insights into the functions and future biomedical applications of xrRNAs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

The Optical Corrector for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) is currently measuring the spectra of 40 million galaxies and quasars, the largest such survey ever made to probe the nature of cosmological dark energy. The 4 m Mayall telescope at Kitt Peak National Observatory has been adapted for DESI, including the construction of a 3$_{.}^{°}$2 diameter prime focus corrector that focuses astronomical light onto a 0.8 m diameter focal surface with excellent image quality over the DESI bandpass of 360–980 nm. The wide-field corrector includes six lenses, as large as 1.1 m in diameter and as heavy as 237 kilograms, including two counterrotating wedged lenses that correct for atmospheric dispersion over zenith angles from 0° to 60°. The lenses, cells, and barrel assembly all meet precise alignment tolerances on the order of tens of microns. The barrel alignment is maintained throughout a range of observing angles and temperature excursions in the Mayall dome by use of a hexapod, which is itself supported by a new cage, ring, and truss structure. In this paper we describe the design, fabrication, and performance of the new corrector and associated structure, focusing on how they meet DESI requirements. In particular, we describe the prescription and specifications of the lenses, design choices and error budgeting of the barrel assembly, stray light mitigations, and integration and test at the Mayall telescope. We conclude with some validation highlights that demonstrate the successful corrector on-sky performance, and we list some lessons learned during the multiyear fabrication phase.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1970

The Apollo Docking System

The Apollo docking system is the means by which the Apollo command and service modules and the lunar module are connected and disconnected during a lunar-landing mission. The system incorporates a CSM probe assembly that mates with a drogue assembly on the LM. Twelve automatic latches mounted on the CSM docking ring provide for structural integrity between the vehicles and for tunnel sealing during crew transfer. A functional description of the flight hardware and the alternate concepts that were evaluated to determine the system best suited to Apollo requirements are presented.

Kenneth A Bloom↗
NASA NTRS1974

Toroidal equipment packaging

For optimal packaging of equipment in shallow-cone vehicle toroidal packaging sets center of gravity of equipment forward. Packages are supported on rings within probe structure to provide low center of gravity. System permits interchanging of units for balance control, so minimum of lateral ballast is required.

Jones, W. J.↗
NASA NTRS1976

The waveguide laser - A review

The present article reviews the fundamental physical principles essential to an understanding of waveguide gas and liquid lasers, and the current technological state of these devices. At the present time, waveguide laser transitions span the visible through submillimeter regions of the wavelength spectrum. The introduction discusses the many applications of waveguide lasers and the wide variety of laser configurations that are possible. Section 1 summarizes the properties of modes in hollow dielectric waveguides of circular, rectangular, and planar cross section. Section 2 considers various approaches to optical feedback including internal and external mirror Fabry-Perot type resonators, hollow waveguide distributed feedback structures, and ring-resonant configurations. Section 3 discusses those aspects of molecular kinetic and laser theory pertinent to the design and optimization of waveguide gas lasers.

Degnan, J. J.↗
NASA NTRS1979

Infrared observations of the Jovian system from Voyager 2

As on Voyager 1, the infrared spectroscopy and radiometry instrument on Voyager 2 returned a large number of spectral and radiometric data on Jupiter and its satellites for varying conditions of latitude, longitude, local time, and phase and emission angles. The Voyager 2 average spectrum is slightly noisier than that from Voyager 1. The paper presents selected examples of results from the Voyager 2 infrared investigation, with particular reference to latitudinal variation of the abundance ratio of ethane to acetylene, atmospheric thermal structure, Jupiter's ring, and satellites.

Hanel, R.↗
NASA NTRS1981

Vibration of prestressed periodic lattice structures

Equations are developed for vibration of general lattice structures that have repetitive geometry. The method of solution is an extension of a previous paper for buckling of similar structures. The theory is based on representing each member of the structure with the exact dynamic stiffness matrix and taking advantage of the repetitive geometry to obtain an eigenvalue problem involving the degrees-of-freedom at a single node in the lattice. Results are given for shell-and beam-like lattice structures and for rings stiffened with tension cables and a central mast. The variation of frequency with external loading and the effect of local member vibration on overall modes is shown.

Anderson, M. S.↗
NASA NTRS1984

Dust in space and comets; Proceedings of the Topical Meeting, Graz, Austria, June 25-July 7, 1984

Consideration is given to: the mass loading of planetary magnetospheres by rocky satellites; the effects of electrostatic forces on the vertical structure of planetary rings; and dust motion in Jupiter's tilted magnetic field. Other topics include: IRAS observations of cometary dust; dust environment models for Comet P/Halley; plasma processes and solar wind interaction; and cometary interplanetary field enhancements in the solar wind. Consideration is also given to: the impact of dust grains on fast fly-by spacecraft; EUV observations of Comet Halley; and the thermal model and thermo-mechanical stresses in cometary nuclei.

Morfill, G. E.↗
NASA NTRS1988

Submillimeter and millimeter observations of solar system objects

Planetary atmospheres and satellite surfaces are observed with the three element array at Caltech's Owens Valley Radio Observatory, Caltech's submillimeter telescope on Mauna Kea and at the 12-meter telescope at Kitt Peak. Researchers are primarily interested in spectroscopy of the atmospheres of Venus, Mars and Titan and the continuum structure of Saturn Rings, Galilean satellites, Neptune and Uranus. During the last year researchers completed a supersynthesis of the Saturn system at 2.8 mm with spatial resolution of 3 arc sec. They just completed a 4-confuguration synthesis of Venus in the CO absorption line. They hope to recover the wind patterns in the altitude range from 60 to 100 km where winds have never been measured. Two important questions are being investigated: (1) how high in the Venus atmosphere do 4-day winds extend, and (2) can we produce experiment proof (or disproof) of the subsolar-to-anti-solar flow (Dickenson winds) predicted by general circulation models.

Muhleman, Duane O.↗
NASA NTRS1992

Bronzite Granophyre: New insight on Vredefort

The Vredefort Dome is located near the center of the Witwatersrand Basin, about 120 km southeast of Johannesburg, South Africa. Its origin is enigmatic, ranging from a major impact event to endogenous processes, either igneous or tectonic. A unique melt rock, the 'Bronzite' Granophyr, occurs in the Vredefort structure as vertical ring dikes along the contact between sedimentary collar and core of Archaean granites, and as vertical dikes extending northwest-southeast and northeast-southwest in the granitic core. The granophyre rocks have an unusual composition and high content of recrystallized sedimentary inclusions compared to common intrusive igneous rocks with similar SiO2 content (61 to 70 percent by weight). The unique nature of the granophyre has been underlined in previous studies and origin hypotheses as an impact melt or as a highly contaminated intrusive mafic magma have also been discussed. We present new results obtained from a recent detailed petrographic and geochemical study of a very large and texturally diverse suite of 'Bronzite' Granophyre, representing all dikes occurring at Vredefort.

Therriault, A. M.↗
NASA NTRS1993

Star formation in the disks of H I-rich S0 galaxies

We present the results of a H-alpha emission-line imaging survey of a sample of neutral-gas-rich S galaxies. We find evidence of disk H II regions in 14 of our sample of 32 galaxies, detect nuclear or faint diffuse circumnuclear H-alpha + forbidden N II emission in another 11 galaxies without disk H II regions, and obtain upper limits for 8 galaxies. We find a striking dichotomy between Ss with and without H II regions; either a galaxy has a number of H II regions, most often distributed into distinct rings or ringlike structures, or there are none down to detection limits equivalent to a single unreddened H II region ionized by single O stars. We find that the S0s without disk H II regions have a lower median M sub H I/L(B) than those with disk H II regions, but the distributions have a large range of dispersion. Our data suggest that S0s may lie in a regime where local threshold effects, perhaps primarily kinematic in origin, are more important in determining the star formation in these galaxies than the global stability mechanisms that recent empirical models for large-scale star formation have suggested prevail in later-type spirals.

Pogge, Richard W.↗
NASA NTRS1994

Modeling of rolling element bearing mechanics. Computer program user's manual

This report provides the user's manual for the Rolling Element Bearing Analysis System (REBANS) analysis code which determines the quasistatic response to external loads or displacement of three types of high-speed rolling element bearings: angular contact ball bearings, duplex angular contact ball bearings, and cylindrical roller bearings. The model includes the defects of bearing ring and support structure flexibility. It is comprised of two main programs: the Preprocessor for Bearing Analysis (PREBAN) which creates the input files for the main analysis program, and Flexibility Enhanced Rolling Element Bearing Analysis (FEREBA), the main analysis program. This report addresses input instructions for and features of the computer codes. A companion report addresses the theoretical basis for the computer codes. REBANS extends the capabilities of the SHABERTH (Shaft and Bearing Thermal Analysis) code to include race and housing flexibility, including such effects as dead band and preload springs.

Greenhill, Lyn M.↗
NASA NTRS1994

Modeling of rolling element bearing mechanics. Theoretical manual

This report documents the theoretical basis for the Rolling Element Bearing Analysis System (REBANS) analysis code which determines the quasistatic response to external loads or displacement of three types of high-speed rolling element bearings: angular contact ball bearings; duplex angular contact ball bearings; and cylindrical roller bearings. The model includes the effects of bearing ring and support structure flexibility. It is comprised of two main programs: the Preprocessor for Bearing Analysis (PREBAN) which creates the input files for the main analysis program; and Flexibility Enhanced Rolling Element Bearing Analysis (FEREBA), the main analysis program. A companion report addresses the input instructions for and features of the computer codes. REBANS extends the capabilities of the SHABERTH (Shaft and Bearing Thermal Analysis) code to include race and housing flexibility, including such effects as dead band and preload springs.

Merchant, David H.↗
NASA NTRS1994

Optical imaging and high spatial resolution 21 cm H I observations of the peculiar galaxy NGC 2782 (Arp 215)

We have used the Very Large Array (VLA) B and C Arrays to make 21 cm H I observations of the peculiar galaxy NGC 2782 (Arp 215). These observations are complementary to previously published D Array VLA data, which revealed the presence of a long (5 min to 54 kpc) H I plume near the western side of this galaxy. We have also obtained BVRI H alpha images of the main body of this galaxy using the McDonald Observatory 30 inch telescope. The optical images of this galaxy show a strong stellar tail extending to the east, opposite the H I plume. Within the disk of NGC 2782, unsharp masking of the optical images at all 4 broadband wavelengths reveals three bright 'ripples', separated by approximately 15 sec. The light profiles across these ripples are symmetric, without a sharp outer edge. H alpha is strong at the starburst nucleus and along the northern and western sections of the inner ripple. The new higher resolution H I data show that the atomic gas is very clumpy. We have identified ten H I clumps in the long western plume, with H I masses of approximately 10(exp 8) solar mass, similar to those of dwarf galaxies, and column densities of approximately 10(exp 21) cm(exp -2) over surface areas of approximately 10 kpc(exp 2). No CO (1-0) emission has been detected from this plume, suggesting that it is material stripped from the outer edge of a disk galaxy. The H alpha peaks, in contrast, are generally not coincident with H I peaks. No H I is seen at the tip of the eastern extension. The H I distribution near this structure is ring-like rather than tail-like as in the optical data. We have detected redshifted H I absorption toward the central continuum source, indicating gas infall into the nuclear region. Using a restricted 3-body dynamical model, we have successfully reproduced the basic properties of NGC 2782 with an off-center collision between two galaxies, where a lower mass disk companion (M(sub 2)/M(sub 1) approximately 0.25) collides almost head-on with a larger disk galaxy. In this scenario, the companion becomes the eastern extension, and the long western tail is material pulled out from the larger galaxy. The lack of H I at the tip of the eastern tail may be due to stripping during the collision. Alternative formation scenarios include a merger or interaction between two disk galaxies, where the ripples may be due to a disturbed spiral density wave or galactic winds due to the central starburst.

Smith, Beverly J.↗
NASA NTRS1999

Cassini Radio Science Experiments on Saturn and Titan Preserved Because of Lewis Analysis

The Cassini mission to Saturn is an international venture with participation from NASA, the European Space Agency, and the Italian Space Agency. The Cassini spacecraft was launched from Cape Canaveral in October 1997 and is scheduled to arrive at Saturn in July 2004. After arrival, the spacecraft will orbit Saturn about 60 times over a period of 4 years. During this time, the Cassini Radio Science Subsystem will be used to investigate the atmosphere and rings of Saturn and the atmosphere of its largest moon, Titan--which is larger than Mercury and is the only moon in our solar system with a dense atmosphere. A critical component in Cassini s Radio Science Subsystem is a traveling-wave tube (TWT) that was designed at the NASA Lewis Research Center and built by Hughes Electronic Dynamics Division (ref. 1). This TWT will amplify downlink microwave signals at a frequency of 32 GHz for the Deep Space Network and will be involved in a number of experiments. These include occultation experiments in which the microwave signal will be beamed through rings and atmospheres toward Earth. Researchers will analyze the received signals to determine the sizes and distributions of the particles in the rings and the structure and composition of the atmospheres. The Radio Science Subsystem also will also be used to more accurately determine the mass and size of Saturn and its moons, to investigate the solar corona, and to search for gravity waves from outside the solar system.

Wilson, Jeffrey D.↗
NASA NTRS2012

Gas Debris Disks: A New Way to Produce Dust Patterns

Debris disks like those around Fomalhaut and Beta Pictoris show striking dust patterns often attributed to planets. But adding a bit of gas to our models of these disks--too little to detect-could alter this interpretation. Small amounts of gas lead to new dynamical instabilities that may mimic the narrow eccentric rings and other structures planets would create in a gas-free disk. rll discuss these phenomena and whether or not we can still use dust patterns as indicators of hidden exoplanets.

Kuchner, Marc J.↗