Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution processable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Influence of voids on the thermal and light stability of perovskite solar cells

The formation of voids in perovskite films close to the buried interface has been reported during film deposition. These voids are thought to limits the efficiency and stability of perovskite solar cells (PSCs). Here, we studied the voids formed during operation in perovskite films that were optimized during the solution deposition process to avoid voids. New voids formed during operation are found to assemble along grain boundaries at the bottom interface, caused by the loss of residual solvent and conversion of amorphous phase to crystalline phase. Unexpectedly, the formation of these voids did not negatively affect the stability of PSCs. Decreasing the amorphous region in perovskites by thermal annealing decreased the positive iodide interstitial density, and improved the light stability of PSCs. The annealed devices maintained 90% of their initial efficiency and light soaking for 1900 hours at open circuit condition under 1-sun illumination at 50°C.

14 SOLAR ENERGY↗
DOE OSTI2025

ARCS: Agentic Retrieval-Augmented Code Synthesis with Iterative Refinement

Agentic Retrieval-Augmented Code Synthesis with Iterative RefinementIn supercomputing, efficient and optimized code generation is essential to leverage high-performance systems effectively. We have developed Agentic Retrieval-Augmented Code Synthesis (ARCS), an advanced framework for accurate, robust, and efficient code generation, completion, and translation. ARCS integrates Retrieval-Augmented Generation (RAG) with Chain-of-Thought (CoT) reasoning to systematically break down and iteratively refine complex programming tasks. An agent-based RAG mechanism retrieves relevant code snippets, while real-time execution feedback drives the synthesis of candidate solutions. This process is formalized as a state-action search tree optimization, balancing code correctness with editing efficiency. Evaluations on the Geeks4Geeks and HumanEval benchmarks demonstrate that ARCS significantly outperforms traditional prompting methods in translation and generation quality. By enabling scalable and precise code synthesis, ARCS offers transformative potential for automating and optimizing code development in supercomputing applications, enhancing computational resource utilization

Bhattarai, Manish [Los Alamos National Labs]↗
DOE OSTI2025

Tailoring optical response of MXene thin films

Due to their attractive optical properties, 2D MXenes have garnered interest in nanophotonic and optoelectronic applications. However, tuning their properties typically requires the iterative synthesis of MXenes with a specific set of properties, such as the absorption band position, electronic conductivity, and dielectric constant. We demonstrate how to tailor the optical properties of MXene thin films over a broad 1500-nm wavelength range by mixing different ratios of highly conductive Ti 3 C 2 T x with poorly conductive Nb 2 CT x . By changing the MXene film composition, the epsilon-near-zero (ENZ) point, where the optical properties transit from dielectric to metallic, was varied in the spectral range from 1.1 to 2.6 µm. Additionally, we observed a reduction in absorption in some compositions compared to the absorption of the pure MXene films. Compared to other methods, this approach enables simple and continual tuning of MXene optical properties without requiring multiple time-consuming synthesis steps.

2D materials↗
DOE OSTI2020

Dopants, Isotope, Pressure and Lead Sequestration for Hybrid Perovskite Materials

Dopants, Isotope, Pressure and Lead Sequestration for Hybrid Perovskite Materials The soaring power conversion efficiency (PCE) of solution process-based organic-inorganic hybrid perovskites solar cells (PSCs) assures their membership in the competitive photovoltaic technologies. However, stability, toxicity and scalability are the three grand challenges that still impedes the market adoption of PSCs. Careful fundamental studies on how their fascinating optoelectronic properties is related to their structures may provide leads to these challenges and also spin off new applications. In this talk, I will present our recent study on the dopants, isotope and pressure effects on hybrid perovskite materials (HPMs). We discovered an interesting bipolar electron injection in LiCl-doped MAPbI 3 -based UV detectors that respond to the energy of UV photons in distinguished photocurrents polarity. We also investigated how the underline interaction between the mass of the cationic rotors and the inorganic lattice in HPMs by isotope effect. In-situ synchrotron X-ray and time-resolved photoluminescence revealed abnormal optoelectronic properties of HPMs by modulating their bond angles and bond lengths using high pressure techniques. Moreover, I will also discuss our new technology to sequestrate lead leakage on perovskite solar cells that can absorb >99% leaked Pb ions under severe device damge while without sacrificing the PCE under normal operational conditions.

Xu, Tao↗
DOE OSTI2023

Research Plan and Preliminary Results in Developing the Fabrication Parameters for Alloy 709 in Different Product Forms―Grain Coarsening Temperature Evaluation

The Advanced Reactor Technologies (ART) Program has established a multi-year plan to develop Alloy 709 advanced stainless steel (A709), generate the data package and develop material-specific design parameters in qualifying it as a new structural material for Class A component design in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section III, Division 5, High Temperature Reactors. In collaboration with material vendors, the Advanced Materials Development activities under ART have successfully scaled the A709 plate form production from a laboratory heat of 500 pounds to commercial heats totaling 133,000 pounds of A709 plate fabricated from three heats. The goal of the overall A709 development program is to establish the necessary microstructural and mechanical properties relationship for A709 to ultimately develop fabrication parameters for other product forms such as bars, piping and forging using the available ART A709 materials. The objective of this A709 development work at ORNL in FY2023 is to experimentally determine grain coarsening behavior for the A709 heats and to experimentally generate the continuous cooling precipitation (CCP) diagram for A709 using the as-rolled commercial heat plate materials. Integral to this work is the characterization of the as-rolled materials and the determination of an effective solution annealing process. This report summarizes the work performed to identify the grain coarsening temperature for commercial heat 58776-3RB fabricated by G. O. Carlson and heat 529900-02 fabricated by Allegheny Technologies Incorporated (ATI) Flat Rolled Products.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Transformative Manufacturing of Adaptive Wire Feedstocks with Atomic Layer Deposition of Nb 2 O 5 onto Depleted Uranium [Slides]

Project Motivation: Uranium corrosion susceptible and highly catalytic; Exposure thickens oxide impacting material performance. This worsens with time; Sigma is uniquely positioned to tackle R&D challenges with Uranium processing. Possible Solutions: 1) Make new material for each weld. Occupational exposure, difficult to align resources ; 2) Coatings? Coating adds foreign material: can this be minimized?

36 MATERIALS SCIENCE↗
DOE OSTI2024

Progressive Hedging Decomposition for Solutions of Large-Scale Process Family Design Problems

In previous work, we have introduced a mathematical model for solving a discretized version of the process family design problem. This involves two sets of decision variables. One set selects which unit module designs are included in the process platform out of a candidate set of options; the other set determines which of these unit module designs are assigned to each variant. In this work, we exploit a parallelized Progressive Hedging (PH) algorithm to solve even larger scale design problems. PH is a well-known algorithm traditionally used to solve stochastic programming problems. While our problem is not a two-stage stochastic programming problem, the structure is similar, and it can be directly mapped to the PH approach, which we employ here to solve this deterministic optimization problem. We decompose our problem by process variant. We treat the platform unit module design variables as first-stage and the assignment of unit module designs to variants as second-stage, solving the problem using mpi-sppy. We demonstrate this approach on case studies of CC, water desalination, and refrigeration.

Stinchfield, Georgia↗
DOE OSTI2025

High-Fidelity, Large-Scale, Realistic Dataset Development

The final report summarizes the work performed for supporting the ARPA-E Grid Optimization Competition (Challenge 2 and Challenge 3) within the stated period. Challenge 2 For the challenge period, the main responsibility of the team is to investigate, gen- erate, and deliver parts of the data sets for the competition, based on the competition model for Challenge 2, existing data sets from Challenge 1, and data source supplied by other data set teams. Challenge 3 For the challenge period, the main responsibility of the team is to propose, create, deliver, and maintain the data format during the competition period. The data format will specify how the benchmark data will be represented and communicated to competitors. It will also specify how competitors should report back the solutions. The data format will be closely aligned with the problem formulation (maintained by the formulation team) and the solution validation process (maintained by the validation team). Our team is also responsible in investigating, generating, and delivering parts of the data sets for the competition. The data sets will be created based on the competition model for Challenge 3, existing data sets from Challenge 1 and Challenge 2, and data source supplied by other data set teams.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Electrochemical Production of Calcium Hydroxide from Calcium Carbonate

Calcium hydroxide is electrochemically synthesized to address SRNL core competency of Creating Manufacturing & Energy Solutions. This process is energy efficient compared to high temperature calcium carbonate decomposition to produce calcium oxide for the cement industry. Ultrasonic dehydration coupled with induction heating can further reduce the energy need for cement production.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Low-Temperature Plasma-Based Metrology of Lithium-Ion Battery Electrode Materials (CRADA Final Report)

As part of the Cyclotron Road program, SirenOpt Inc. evaluated its low-temperature plasma-based metrology sensor prototype for measuring multiple critical properties of lithium-ion battery electrode materials in parallel and in real-time. Cost-effective, minimal-waste manufacturing of high-performance battery electrode materials will be vital for achieving society’s net-zero carbon emission goals. Because existing electrode metrology sensors cannot operate within most sections of manufacturing lines, manufacturers often complete hundreds of processing steps before they can test their products and detect problems. When manufacturers perform these offline tests, they typically only test a small portion of the manufactured products. Current electrode manufacturing thus often yields many low-quality products, or off-spec products that must be thrown away all together. For example, at least 6% of the total lithium-ion battery manufacturing cost (i.e., over $250 million/year for the average gigafactory) is devoted to processing defective electrodes that are not scrapped until performance tests are failed during late-stage quality control checks. Electrode variability also leads manufacturers to build extra cells into battery packs to reduce the risk of poor performance. For example, many electric vehicle (EV) manufacturers include up to 10% more cells than needed, which substantially increases the cost and weight of the final EV product. The SirenOpt sensor can potentially enable early detection of poorly manufactured electrodes and allow them to be removed earlier from manufacturing lines, which can save battery manufacturers (hundreds of) millions of dollars per year. The sensor can further be used to improve product quality by accelerating R&D and process optimization, improving quality control, and enabling real-time process control. Overall, a real-time, in-situ metrology strategy can create unprecedented opportunities for implementation of smart manufacturing practices and advanced quality and process control solutions to realize higher battery electrode throughput and performance.

25 ENERGY STORAGE↗
DOE OSTI2020

System and method for forming material substrate printer

A method is disclosed for manufacturing a part via an additive manufacturing process. A solution is used which has a volatile component within which is suspended particles of a powdered material. The solution is heated until it at least one of begins boiling or is about to begin boiling. The heated solution is then deposited at least at one location on a substrate to help form a layer of the part. The volatile component then evaporates, leaving only the particles of powdered material. The particles are then heated to the melting point. The deposition and heating operations are repeated to successively form a plurality of layers for the part. The evaporation of the volatile component helps to cool the part.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Carbon material supported hollow metal oxide nanoparticles, methods and applications

A method for preparing a material composition comprising a hollow transition metal oxide nanoparticle supported upon a carbon material support includes a solution impregnation process step, followed by a thermal reduction process step and finally a thermal oxidation process step. The material composition, an electrode and an electrical component such as but not limited to a battery are all predicated at least in-part upon the material composition prepared in accord with the foregoing method. The foregoing material composition, electrode, battery and method may ultimately provide a LIB with enhanced performance.

Yu, Yingchao↗
DOE OSTI2022

Separation of rare earth elements using supported membrane solvent extraction

A system and method for the recovery and separation of rare earth elements (REEs) are provided. The system and method include the supported membrane solvent extraction of REEs and the separation of light and heavy REEs that have been recovered from scrap permanent magnets and other electronic waste. In supported membrane solvent extraction, an organic phase consisting of an extractant and an organic solvent is immobilized in the pores of hollow fibers. An aqueous feed solution and a strip solution flow along the shell side and lumen side of the hollow fibers, respectively. The extractant functions as a carrier to selectively transport certain rare earth metal ions from the feed side to the strip side. The rare earth metals are concurrently back extracted in the strip solution, allowing processing to proceed continuously without equilibrium limitations.

Bhave, Ramesh R.↗
DOE OSTI2022

System and method for forming material substrate printer

A method is disclosed for manufacturing a part via an additive manufacturing process. A solution is used which has a volatile component within which is suspended particles of a powdered material. The solution is heated until it at least one of begins boiling or is about to begin boiling. The heated solution is then deposited at least at one location on a substrate to help form a layer of the part. The volatile component then evaporates, leaving only the particles of powdered material. The particles are then heated to the melting point. The deposition and heating operations are repeated to successively form a plurality of layers for the part. The evaporation of the volatile component helps to cool the part.

Demuth, James A.↗
DOE OSTI2023

Report on FY 2023 Experimental Results in Developing the Fabrication Parameters for Alloy 709 in Different Product Forms

The Advanced Reactor Technologies (ART) Program has established a multi-year plan to develop Alloy 709 advanced stainless steel (A709), generate the data package and develop material-specific design parameters in qualifying it as a new structural material for Class A construction in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section III, Division 5, High Temperature Reactors (ASME 2023). In collaboration with material vendors, the Advanced Materials Development activities under ART have successfully scaled the A709 plate form production from a laboratory heat of 500 pounds to commercial heats totaling 133,000 pounds of A709 plate fabricated from three heats. The goal of the overall A709 development program is to establish the necessary microstructural and mechanical properties relationship for A709 to ultimately develop fabrication parameters for other product forms such as bars, pipes, and forgings using the available ART A709 materials. The objective of this A709 development work in FY 2023 is to experimentally determine grain coarsening behavior for the A709 heats and to experimentally generate the continuous cooling precipitation (CCP) diagram for A709 using the as-rolled commercial heat plate materials. Integral to this work is the characterization of the as-rolled materials and the determination of an effective solution-annealing process, which was reported in Y. Wang et al., 2023. This report summarizes the results of the high-speed dilatometry project to develop the CCP diagram using the commercial heat 58776-3RB fabricated by G. O. Carlson and heat 529900-02 fabricated by Allegheny Technologies Incorporated (ATI) Specialty Rolled Products.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

An efficient approach to explore the solution space of a wind turbine rotor design process

This study proposes a novel approach to explore the solution space of a wind turbine rotor design process. The goal is to offer to blade designers the possibility to select an optimal rotor for given market conditions, assessing trade-offs and alternatives in a matter of minutes. The design process consists of sequential aerodynamic-structural optimizations, where the two loops are linked via a blade-loading parameter that can be varied by the user. A design study is performed starting from the IEA Wind Task 37 land-based reference wind turbine. The solution space is characterized for rotor diameters in the range of 130–160 m, rated generator power values in the range of 3.0–6.0 MW, and tip-speed ratios in the range of 7.5–12.5. Results are discussed highlighting optimal design decisions and trade-offs.

17 WIND ENERGY↗
DOE OSTI2024

Impacts of Fast Critical Assembly Fuel Discards on Liquid Waste Processes

The Savannah River Nuclear Solutions (SRNS) Fast Critical Assembly (FCA) mission is reestablishing the electrolytic dissolver for processing of Pu and Pu-U materials clad in stainless steel (SS). H-Canyon is planning to dissolve and neutralize FCA fuel without recovering the special nuclear material (i.e., Pu) prior to discarding to the Concentration, Storage, and Transfer Facilities (CSTF) operated by the Savannah River Mission Completion (SRMC) Liquid Waste (LW) Organization. The FCA discards will be combined with sludge in the CSTF after Low Temperature Aluminum Dissolution (LTAD) if needed. The combined waste will be washed, concentrated, and vitrified at the Defense Waste Processing Facility (DWPF). The high level waste canisters produced will be temporarily stored in the Glass Waste Storage Buildings prior to transfer to a future federal repository. Decants from LTAD and sludge washing will be combined with DWPF recycle and dissolved salt cake to prepare salt batches for processing in the Salt Waste Processing Facility. The resulting decontaminated salt solution will be processed in the Saltstone Production Facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗