Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slicing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Effects of orbital exposure on Halar during the LDEF mission

Thermomechanical Analysis (TMA), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis (TGA) were performed on samples of Halar exposed on the LDEF Mission for 6 years in orbit and unexposed Halar control samples. Sections 10-100 microns thick were removed from the exposed surface down to a depth of 1,000 microns through the 3 mm thick samples. The TMA and DSC results, which arise from the entire slice and not just its surface, showed no differences between the LDEF and the control samples. TMA scans were run from ambient to 300 C; results were compared by a tabulation of the glass transition temperatures. DSC scans were run from ambient to 700 C; the enthalpy of melting was compared for the samples as a function of section depth with the sample. The TGA results, which arise from the surface of the sample initially, showed a sharp increase in the topmost 50 micron section (the exposed, discolored side) in the weight loss of 170 C in oxygen. This weight loss dropped to bulk values in the range of depth of 50-200 microns. The control sample showed only a slight increase in weight loss as the top surface was approached. The LDEF Halar sample appears to be mechanically undamaged, with a surface layer which oxidizes faster as a result of orbital exposure.

Brower, William E., Jr.↗
NASA NTRS1990

Holographic enhanced remote sensing system

The Holographic Enhanced Remote Sensing System (HERSS) consists of three primary subsystems: (1) an Image Acquisition System (IAS); (2) a Digital Image Processing System (DIPS); and (3) a Holographic Generation System (HGS) which multiply exposes a thermoplastic recording medium with sequential 2-D depth slices that are displayed on a Spatial Light Modulator (SLM). Full-parallax holograms were successfully generated by superimposing SLM images onto the thermoplastic and photopolymer. An improved HGS configuration utilizes the phase conjugate recording configuration, the 3-SLM-stacking technique, and the photopolymer. The holographic volume size is currently limited to the physical size of the SLM. A larger-format SLM is necessary to meet the desired 6 inch holographic volume. A photopolymer with an increased photospeed is required to ultimately meet a display update rate of less than 30 seconds. It is projected that the latter two technology developments will occur in the near future. While the IAS and DIPS subsystems were unable to meet NASA goals, an alternative technology is now available to perform the IAS/DIPS functions. Specifically, a laser range scanner can be utilized to build the HGS numerical database of the objects at the remote work site.

Iavecchia, Helene P.↗
NASA NTRS1992

Debris about asteroids: Where and how much?

We summarize several recent findings on the size and shape of the region within which material can stably orbit an asteroid. If the asteroid (with assumed density 2.38 g/cu cm) circles the Sun at 2.55 AU, co-planar prograde material will remain trapped whenever started on unperturbed circular orbits at less than about 220 R(sub A) (asteroid radii); co-planar retrograde particles are stable out twice as far. Our 3-D stability surface, which encloses several hundred numerically calculated orbits that start with various inclinations, is shaped like a sphere with its top and bottom sliced off; its dimensions scale like the Hill radius =(mu/3)(exp 1/3)R, where mu is the asteroid-to-solar mass ratio and R is the asteroid's orbital radius. If the asteroid moves along an elliptical orbit, a fairly reliable indicator of the dimensions of the hazard zone is the size of its Hill sphere at the orbit's pericenter. Grains with radii less than a few mm will be lost through the action of radiation forces which can induce escape or cause collisions with the asteroid on times scales of a few years; interplanetary micrometeoroids produce collisional break-up of these particles in approximately 10(exp 4) yrs. The effects of Jupiter and of asteroids that pass close to the target asteroid allow particles to diffuse from the system, again shrinking the hazard zone. None of the considered sources-primordial formation, debris spalled off the asteroid during micrometeoroid impact, captured interplanetary particles, feeder satellites, etc., seem capable of densely populating distant orbits from the asteroid. No certain detections of debris clouds or of binary asteroids have been made. Thus, it seems highly unlikely that a spacecraft fly-by targeted at 100 R(sub A) from the asteroid over its orbital pole would encounter any material.

Burns, Joseph A.↗
NASA NTRS1992

Algorithms for airborne Doppler radar wind shear detection

Honeywell has developed algorithms for the detection of wind shear/microburst using airborne Doppler radar. The Honeywell algorithms use three dimensional pattern recognition techniques and the selection of an associated scanning pattern forward of the aircraft. This 'volumetric scan' approach acquires reflectivity, velocity, and spectral width from a three dimensional volume as opposed to the conventional use of a two dimensional azimuthal slice of data at a fixed elevation. The algorithm approach is based on detection and classification of velocity patterns which are indicative of microburst phenomenon while minimizing the false alarms due to ground clutter return. Simulation studies of microburst phenomenon and x-band radar interaction with the microburst have been performed and results of that study are presented. Algorithm performance indetection of both 'wet' and 'dry' microbursts is presented.

Gillberg, Jeff↗
NASA NTRS1992

An interactive environment for the analysis of large Earth observation and model data sets

We propose to develop an interactive environment for the analysis of large Earth science observation and model data sets. We will use a standard scientific data storage format and a large capacity (greater than 20 GB) optical disk system for data management; develop libraries for coordinate transformation and regridding of data sets; modify the NCSA X Image and X Data Slice software for typical Earth observation data sets by including map transformations and missing data handling; develop analysis tools for common mathematical and statistical operations; integrate the components described above into a system for the analysis and comparison of observations and model results; and distribute software and documentation to the scientific community.

Bowman, Kenneth P.↗
NASA NTRS1992

SAVS: A Space Analysis and Visualization System

We propose to develop, test, demonstrate, and deliver to NASA a powerful and versatile data acquisition, manipulation, analysis and visualization system which will enhance scientific capabilities in the display and interpretation of diverse and distributed data within an integrated user-friendly environment. Our approach exploits existing technologies and combines three major elements into an easy-to-use interactive package: (1) innovative visualization software; (2) advanced database techniques; and (3) a rich set of mathematical and image processing tools. Visualization capabilities will include one-, two-, and three-dimensional displays, along with animation, compression, warping and slicing functions. Analysis tools will include generic mathematical and statistical techniques along with the ability to use large scale models for interactive interpretation of large volume data sets. Our system will be implemented on Sun and DEC UNIX workstations and on the Stardent Graphics Super computer. Our final deliverable will include complete documentation and a NASA/NSF-CDAW/SUNDIAL campaign demonstration.

Szuszczewicz, Edward P.↗
NASA NTRS1989

Effect of chronic D-fenfluramine administration on rat hypothalamic serotonin levels and release

The effect of administering to rats (in doses of 1.25, 2.5, 5, or 10 mg/kg/day for 10 days) of an anorectic agent, D-fenfluramine, on the serotonin levels in hypothalamic tissue and on the in vitro release of serotonin by hypothalamic slices was investigated in rats which were sacrificed six days after the end of treatment. It was found that D-fenfuramine had no effect on tissue serotonin in doses from 1.25 to 5 mg/kg. However, given at 10 mg/kg level, serotonin led to a 22 percent decrease. The release of serotonin was found to be not affected by D-fenfluramine.

Schaechter, Judith D.↗
NASA NTRS1990

On cloud altitude determinations from High Resolution Interferometer Sounder (HIS) observations

High Spectral Resolution Interferometer Spectrometer (HIS) data are used with simultaneous airborne lidar data to investigate the accuracy of cloud height determinations using the 'COz slicing method'. It is shown that the accuracy of cirrus cloud heights are greatly improved as the spectral resolution and coverage is increased. Since next generation infrared temperature and moisture sounders will yield high spectral resolution with quasicontinuous spectral coverage, improved cloud height accuracies achieved from these sensors will improve soundings in clouded areas and will also improve our global cloud climatology.

Smith, William L.↗
NASA NTRS1993

On 'large-scale' stable fiber displacement during interfacial failure in metal matrix composites

Experimental results are presented to show that interfacial failure in sapphire-reinforced niobium is characterized by 'large-scale' (5-15 microns) plasticity-controlled fiber displacements occurring under increasing loads. The results are based on the responses during thin-slice fiber pushout tests wherein the fiber is supported over a hole twice the fiber diameter. The results describe an interfacial failure process that should also occur near fiber ends during pullout when a fiber is well-bonded to a soft, ductile matrix, such that eventual failure occurs by shear within the matrix near the interface.

Petrich, R. R.↗
NASA NTRS1990

Is it possible to create a universe in the laboratory by quantum tunneling?

We explore the possibility that a new universe can be created by producing a small bubble of false vacuum. The initial bubble is small enough to be produced without an initial singularity, but classically it could not become a universe - instead it would reach a maximum radius and then collapse. We investigate the possibility that quantum effects allow the bubble to tunnel into a larger bubble, of the same mass, which would then classically evolve to become a new universe. The calculation of the tunneling amplitude is attempted, in lowest order semiclassical approximation (in the thin-wall limit), using both a canonical and a functional integral approach. The canonical approach is found to have flaws, attributable to our method of space-time slicing. The functional integral approach leads to a Euclidean interpolating solution that is not a manifold. To describe it, we define an object which we call a 'pseudomanifold', and give a prescription to define its action. We conjecture that the tunneling probability to produce a new universe can be approximated using this action, and we show that this leads to a plausible result.

Farhi, Edward↗
NASA NTRS1984

FORTH direct execution processors in the Hopkins ultraviolet telescope

Engineers at the Johns Hopkins University Applied Physics Laboratory have designed and built two computers which will control and monitor the Hopkins Ultraviolet Telescope, a 1986 Space Shuttle experiment. These computers implement a microcoded FORTH nucleus in a word-addressed AMD 2900 series bit-slice architecture. All programs for them are written in FORTH, which takes the place of assembly language in this architecture.

Ballard, Ben↗
NASA NTRS1993

Identification of cometary and asteroidal particles in stratospheric IDP collections

He release temperature curves were determined for a specially processed set of 5 microns to 15 microns stratospheric IDP's whose masses, densities, and compositions were accurately measured. The He release temperature in combination with atmospheric entry calculations yields a most probable entry velocity for each particle and association with either an asteroidal (low velocity) or cometary (high velocity) origin. It was found that over half of the 5-15 microns IDP's have entry velocities consistent with asteroidal origin and that at least 20 percent have cometary origins. A few of the asteroidal particles are porous aggregates and it appears that there may be close material similarities among some primitive asteroids and comets. In the processing of individual 5 microns IDP's and determination of entry velocities, a few dozen microtome slices that can be used for a variety of detailed TEM, IR, and ion probe studies were preserved. These procedures provide laboratory samples that can be generically associated with asteroids and comets and are in a sense a limited sample return mission from these primitive bodies.

Brownlee, D. E.↗
NASA NTRS1993

Application of new electro-optic technology to Space Station Freedom data management system

A low risk design methodology to permit the local bus structures to support increased data carrying capacities and to speed messages and data flow between nodes or stations on the Space Station Freedom Data Management System in anticipation of growing requirements was evaluated and recommended. The recommended design employs a collateral fiber optic technique that follows a NATO avionic standard that is developed, tested, and available. Application of this process will permit a potential 25 fold increase in data transfer performance on the local wire bus network with a fiber optic network, maintaining the functionality of the low-speed bus and supporting all of the redundant transmission and fault detection capabilities designed into the existing system. The application of wavelength division multiplexing (WDM) technology to both the local data bus and global data bus segments of the Data Management System to support anticipated additional highspeed data transmission requirements was also examined. Techniques were examined to provide a dual wavelength implementation of the fiber optic collateral networks. This dual wavelength implementation would permit each local bus to support two simultaneous high-speed transfers on the same fiber optic bus structure and operate within the limits of the existing protocol standard. A second WDM study examined the use of spectral sliced technology to provide a fourfold increase in the Fiber Distributed Data Interface (FDDI) global bus networks without requiring modifications to the existing installed cable plant. Computer simulations presented indicated that this data rate improvement can be achieved with commercially available optical components.

Husbands, C. R.↗
NASA NTRS1993

Investigation of cloud properties and atmospheric stability with MODIS

The work accomplished with the MAS (MODIS Airborne Simulator) during the TOGA-COARE (Tropical Ocean Global Atmosphere - Coupled Ocean Atmosphere Response Experiment) from January through June 1993 included cloud investigations with longwave CO2 channels (out to 13.9 microns) that reconfigured spectral channels. The comparison data was used with HIRS (high resolution Infrared Radiation Sounder) data from FIRE (First ISSCP Regional Experiment), CEPEX, and SCAR (Smoke Clouds, Aerosol and Radiation) data for the development of a two layer cloud CO2 slicing algorithm and the development of multi-spectral cloud detection algorithms (specifically tri-spectral) for cloud identification. Regarding the latter, a clustering analysis was added to improve cloud identification within the scatter diagram of tri-spectral (8, 11, and 12 microns) brightness temperatures. Via the regressions of the 8 - 11 and the 11 - 12 micron brightness temperature differences versus precipitable water, the problem of clear sky identification in the scatter diagram was further addressed. Comparison of the tri-spectral technique and visible channel reflectance ratioing indicate the tri-spectral infrared method distinguishes cloud phase more consistently in mixed cloud scenes rather than single phase cloud scenes where visible ratioing performs best.

Menzel, Paul↗
NASA NTRS1991

Experience with custom processors in space flight applications

The Applied Physics Laboratory (APL) has developed a magnetometer instrument for a swedish satellite named Freja with launch scheduled for August 1992 on a Chinese Long March rocket. The magnetometer controller utilized a custom microprocessor designed at APL with the Genesil silicon compiler. The processor evolved from our experience with an older bit-slice design and two prior single chip efforts. The architecture of our microprocessor greatly lowered software development costs because it was optimized to provide an interactive and extensible programming environment hosted by the target hardware. Radiation tolerance of the microprocessor was also tested and was adequate for Freja's mission -- 20 kRad(Si) total dose and very infrequent latch-up and single event upset events.

Fraeman, M. E.↗
NASA NTRS1992

Strategies for enhancing catecholamine-mediated neurotransmission

Major findings made during this project period included the following observations: changes in tyrosine availability do affect brain dopamine release, as assessed by in vivo microdialysis, but that neuronal feedback mechanisms limit the durations of this effect except when dopaminergic neurotransmission has been deficient; the circulating hormone TRH markedly stimulates brain dopamine release, an effect probably mediated by its diketopiperazine metabolite; the amount of circulating L-dopa which enters the brain is both enhanced by carbohydrate consumption and suppressed by protein intake (both nutritional effects can be damaging, inasmuch as a sudden rush of L-dopa into the brain can facilitate dyskinesias, while the inhibition of brain L-dopa uptake by proteins suppresses its conversion to brain dopamine; an appropriate mixture of dietary proteins and carbohydrates can obviate both effects); serotonin release from superfused hypothalamic slices is a linear function of available tryptophan levels throughout the normal dynamic range; the daily rhythm in plasma melatonin levels is abnormal both in the sudden infant death syndrome and in women with secondary amenorrhea; tyrosine can potentiate the anorectic effects of widely-used sympathomimetic drugs; newly-described COMT inhibitors can enhance brain dopamine release in vivo; and a cell culture system, based on Y-79 (retinoblast) cells, exists in which melatonin reliably suppresses dopamine release.

Wurtman, Richard J.↗
NASA NTRS1993

Remote sensing of multilevel clouds during FIRE IFO 2

An unresolved difficulty in the remote sensing of clouds concerns the inability of the cloud retrieval algorithms to adequately recognize and analyze scenes containing overlapping cloud layers. Most cloud retrieval schemes, such as that used by the International Satellite Cloud Climatology Project (ISCCP) assume that each picture element (pixel) contains a single cloud layer. The current study begins to address the complexities of multilayered cloud property retrieval through the application of a modified multispectral, multiresolution (MSMR) method, first detailed in Baum et al. (1992), which merges 1.1 -km (at nadir) spectral data from the Advanced Very High Resolution Radiometer (AVHRR) with 17.4-km (at nadir) High Resolution Infrared Radiometer Sounder (HIRS/2, henceforth HIRS). Both instruments are flown aboard the National Oceanic and Atmospheric Administration (NOAA) polar-orbiting platforms. An ideal case study for this investigation is provided by the NOAA-11 overpass at 20:48 UTC on November 28, 1991. At this time, a large-scale cirrostratus veil overlaid a low-level stratus deck over much of the IFO region. There were both surface lidar and radar observations of the clouds as well as University of North Dakota (UND) Citation aircraft measurements. The presence of overlapping cloud layers within a HIRS FOV is determined from colocated AVHRR spectral data through the use of a fuzzy logic expert system. Conventional algorithms such as spatial coherence and CO2 slicing are used to retrieve cloud pressure and height for each identified cloud layer. The results from the satellite cloud retrieval analysis are compared to results from both surface- and aircraft-based measurements.

Baum, Bryan A.↗
NASA NTRS1993

Atmospheric parameterization schemes for satellite cloud property retrieval during FIRE IFO 2

Satellite cloud retrieval algorithms generally require atmospheric temperature and humidity profiles to determine such cloud properties as pressure and height. For instance, the CO2 slicing technique called the ratio method requires the calculation of theoretical upwelling radiances both at the surface and a prescribed number (40) of atmospheric levels. This technique has been applied to data from, for example, the High Resolution Infrared Radiometer Sounder (HIRS/2, henceforth HIRS) flown aboard the NOAA series of polar orbiting satellites and the High Resolution Interferometer Sounder (HIS). In this particular study, four NOAA-11 HIRS channels in the 15-micron region are used. The ratio method may be applied to various channel combinations to estimate cloud top heights using channels in the 15-mu m region. Presently, the multispectral, multiresolution (MSMR) scheme uses 4 HIRS channel combination estimates for mid- to high-level cloud pressure retrieval and Advanced Very High Resolution Radiometer (AVHRR) data for low-level (is greater than 700 mb) cloud level retrieval. In order to determine theoretical upwelling radiances, atmospheric temperature and water vapor profiles must be provided as well as profiles of other radiatively important gas absorber constituents such as CO2, O3, and CH4. The assumed temperature and humidity profiles have a large effect on transmittance and radiance profiles, which in turn are used with HIRS data to calculate cloud pressure, and thus cloud height and temperature. For large spatial scale satellite data analysis, atmospheric parameterization schemes for cloud retrieval algorithms are usually based on a gridded product such as that provided by the European Center for Medium Range Weather Forecasting (ECMWF) or the National Meteorological Center (NMC). These global, gridded products prescribe temperature and humidity profiles for a limited number of pressure levels (up to 14) in a vertical atmospheric column. The FIRE IFO 2 experiment provides an opportunity to investigate current atmospheric profile parameterization schemes, compare satellite cloud height results using both gridded products (ECMWF) and high vertical resolution sonde data from the National Weather Service (NWS) and Cross Chain Loran Atmospheric Sounding System (CLASS), and suggest modifications in atmospheric parameterization schemes based on these results.

Titlow, James↗