Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Notes on Earth Atmospheric Entry for Mars Sample Return Missions

The entry of sample return vehicles (SRVs) into the Earth's atmosphere is the subject of this document. The Earth entry environment for vehicles, or capsules, returning from the planet Mars is discussed along with the subjects of dynamics, aerodynamics, and heat transfer. The material presented is intended for engineers and scientists who do not have strong backgrounds in aerodynamics, aerothermodynamics and flight mechanics. The document is not intended to be comprehensive and some important topics are omitted. The topics considered in this document include basic principles of physics (fluid mechanics, dynamics and heat transfer), chemistry and engineering mechanics. These subjects include: a) fluid mechanics (aerodynamics, aerothermodynamics, compressible fluids, shock waves, boundary layers, and flow regimes from subsonic to hypervelocity; b) the Earth s atmosphere and gravity; c) thermal protection system design considerations; d) heat and mass transfer (convection, radiation, and ablation); e) flight mechanics (basic rigid body dynamics and stability); and f) flight- and ground-test requirements; and g) trajectory and flow simulation methods.

Rivell, Thomas↗

Analysis of Shockwave Radiation Data in Nitrogen

Data from test series in the Electric Arc Shock Tube Facility were previously reportedfor velocities spanning 6-12 km/s in pure N2 at a freestream pressure of 0.2 Torr. The testseries provided spectrally- and spatially-resolved data for validation of a number of modelsof physical phenomena, including vibrational relaxation, molecular radiation, nitrogendissociation and ionization, and atomic radiation and ionization. In the present workanalysis of data obtained at a nominal velocity of 10.3 km/s is discussed in detail. Spectraare analyzed to extract temperatures and the densities of excited states as a function ofposition behind the shock. The effect of different methods for calculating state populationsand ionization processes is assessed, as is a rigorous assessment of the atomic line lists, withboth missing and extra lines identified.

Re-entry↗

Physics of Rotation Powered Pulsars and Their Nebulae

This letter is my progress report for the Astrophysics Theory grant. The first goal of the research supported by this grant is to produce a time dependent theory of the unsteady relativistic collisionless shock wave terminating the relativistic wind from a pulsar, and compare the predicted surface brightness fluctuations to Hubble Space Telescope observations of the wisps in the Crab Nebula. The second goal is to model the production of electron-positron pairs over the polar caps of rotation powered pulsars, and use the results to predict the heating of the surface due to particle trapping and bombardment of the atmosphere at the base of the polar field lines. We have succeeded in creating a one dimensional hybrid code, in which the electron-positron pairs incident on the shock structure are modeled as a relativistic, adiabatic, ideal MHD fluid, while the heavy ions are treated as particles using a particle-in-cell algorithm. The electromagnetic fields are evaluated from the currents and charge densities in the pairs and the ions, while the particles and the fluid accelerate in response to the computed self-consistent electromagnetic fields. The results are promising, in that the underlying ion cyclotron instability generates finite amplitude, propagating magnetosonic waves in the pairs, whose wavelengths and frequencies, when translated into physical units, are comparable to the observed running waves of brightness observed by HST near the Crab pulsar. The code is undergoing a number of tests, to assure us that this preliminary correspondence is not an artifact. In the coming year, the observational appearance of the models will be computed and compared to the HST observations of the Crab now in hand, and used to predict the HST results which will be obtained the year after next. WE also developed a one dimensional cascade theory for pair creation over pulsars' polar caps. A linear integral equation describing the synchrotron cascade has been derived and solved by iterative techniques, in the case when a high energy electron moving parallel to a star centered dipole magnetic field initiates the cascade through curvature gamma ray emission.

Arons, Jonathan↗

Evolution of the Orszag-Tang vortex system in a compressible medium. II - Supersonic flow

A study is presented on the effect of embedded supersonic flows and the resulting emerging shock waves on phenomena associated with MHD turbulence, including reconnection, the formation of current sheets and vortex structures, and the evolution of spatial and temporal correlations among physical variables. A two-dimensional model problem, the Orszag-Tang (1979) vortex system, is chosen, which involves decay from nonrandom initial conditions. The system is doubly periodic, and the initial conditions consist of single-mode solenoidal velocity and magnetic fields, each containing X points and O points. The initial mass density is flat, and the initial pressure fluctuations are incompressible, balancing the local forces for a magnetofluid of unit mass density. Results on the evolution of the local structure of the flow field, the global properties of the system, and spectral correlations are presented. The important dynamical properties and observational consequences of embedded supersonic regions and emerging shocks in the Orszag-Tang model of an MHD system undergoing reconnection are discussed. Conclusions are drawn regarding the effects of local supersonic regions on MHD turbulence.

Picone, J. Michael↗

Magnetospheric physics - Magnetic fields

A report on progress on magnetospheric magnetic fields during the years from 1971 to 1974 is presented. The topology of the magnetosphere is considered along with the bow shock, upstream phenomena, the magnetosheath and magnetopause, the polar cusp, and the tail and the plasma sheet. Attention is given to the outer magnetosphere and magnetic field models, questions of convection, field-aligned currents and electric fields, and aspects of merging.

Russell, C. T.↗

Radiation modeling with direct simulation Monte Carlo

Improvements in the modeling of radiation in low density shock waves with direct simulation Monte Carlo (DSMC) are the subject of this study. A new scheme to determine the relaxation collision numbers for excitation of electronic states is proposed. This scheme attempts to move the DSMC programs toward a more detailed modeling of the physics and more reliance on available experimental data. The new method is compared with the current modeling technique and both techniques are compared with available data. The differences in the results are evaluated. The test case is based on an AVCO-Everett shock tube experiment, a 10-km/s standing shock wave in air at 0.1 Torr. The new method agrees with the available data as well as the results from the earlier scheme and is more easily extrapolated to different flow conditions.

Carlson, Ann B.↗

Three-dimensional blade vortex interactions

A three-dimensional time dependent Navier-Stokes analysis was applied to the rotor blade vortex interaction problem. The numerical procedure is an iterative implicit procedure using three point central differences to represent spatial derivatives. A series of calculations were made to determine the time steps, pseudo-time steps, iterations, artificial dissipation level, etc. required to maintain a nondissipative vortex. Results show the chosen method to have excellent non-dissipative properties provided the correct parameters are chosen. This study was used to set parameters for both two- and three-dimensional blade vortex interaction studies. The case considered was the interaction between a vortex and a NACA0012 airfoil. The results showed the detailed physics during the interaction including the pressure pulse propagating from the blade. The simulated flow physics was qualitatively similar to that experimentally observed. The BVI phenomena is the result of the buildup and violent collapse of the shock waves and local supersonic pockets on the blade surfaces. The resulting pressure pulse build-up appears to be centered at the blade leading edge.

Davoudzadeh, Farhad↗

Beyond Basic Drag in Interplanetary CME Modeling: Effects of Solar Wind Pileup and High-Speed Streams

Coronal mass ejections (CMEs) cause severe space weather effects throughout our solar system. As a fast CME propagates through interplanetary space, it accumulates solar wind materials at its front. This pileup of materials, or CME-driven sheath, can be important in determining the geoeffectiveness of a CME. We take an existing arrival time model that includes expansion and deformation of the CME flux rope (ANTEATR; Kay & Gopalswamy, 2018, https://doi.org/10.1029/2018JA025780; Kay & Nieves-Chinchilla, 2021a, https://doi.org/10.1029/2020JA028911) and add a pileup procedure (PUP) as a physics-based approach to modeling the CME-driven sheath. ANTEATR-PUP solves the Rankine-Hugoniot equations for an oblique shock to determine the shock speed and sheath density, magnetic field, and temperature. The extra sheath mass affects the background drag calculation. Additionally, ANTEATR can now use any 1D profile for the background solar wind as opposed to the simple empirical models it previously relied upon. We present initial results from ANTEATR-PUP and compare with previous ANTEATR findings. Using results from an MHD simulation, we explore the effects of interactions with a static high-speed stream (HSS) on the CME's and sheath's interplanetary evolution. The drag forces essentially disappear while a CME remains within the HSS, but reappear stronger once the CME exits. The HSS-CME interaction produces the largest changes in the CME and sheath properties at 1 au when it occurs either close to the Sun near the inner simulation boundary at 0.1 au or right before the CME reaches 1 au. We estimate that these changes could significantly affect the geoeffectiveness.

C Kay↗

Experimental shock lithification of water-bearing rock powders

The geology and morphology of the terrestrial planets and their moons have been profoundly affected by impact cratering. Some of these bodies contain substantial quantities of water or ice in their regoliths. It is pointed out that the effects of impacts into water-bearing target rocks are not well understood, and may be significantly different from those produced by identical impacts on a desiccated surface. The present investigation has the objective to determine the effects of water on targets of powdered rock and to seek evidence of impact-induced hydration or clay formation. Samples of andesitic basalt were crushed and sieved, and experiments were conducted on the material smaller than 150 micrometers. These experiments show that the water content of a powdered rock target can strongly affect its physical condition following an impact. A relatively small component (5-15 wt %) of water or ice in planetary surface material could inhibit or prevent lithification throughout much of the shocked volume at an impact site.

Allen, C. C.↗

Calculation of shocked flows by mathematical programming

A framework for using mathematical programming to solve Burgers' equation is presented. The steady-state inviscid Burgers' equation with given boundary conditions is considered, and the physically relevant solution is discretized using a four-point difference scheme for the viscous term and a two-point difference scheme for the inviscid term. The framework is then used to solve the Euler equations for quasi-one-dimensional flows on grids with variable spacing.

Lavery, John E.↗

Physical lumping methods for developing linear reduced models for high speed propulsion systems

In gasdynamic systems, information travels in one direction for supersonic flow and in both directions for subsonic flow. A shock occurs at the transition from supersonic to subsonic flow. Thus, to simulate these systems, any simulation method implemented for the quasi-one-dimensional Euler equations must have the ability to capture the shock. In this paper, a technique combining both backward and central differencing is presented. The equations are subsequently linearized about an operating point and formulated into a linear state space model. After proper implementation of the boundary conditions, the model order is reduced from 123 to less than 10 using the Schur method of balancing. Simulations comparing frequency and step response of the reduced order model and the original system models are presented.

Immel, S. M.↗

Physical processes in the plasma mantle of Venus

The results are presented of a study, which analyzed data from 10 Pioneer Venus orbits in order to see whether similar wave particle interaction processes also exist in the corresponding region around Venus. The first conclusion is that the apparent physical processes in the mantle are indeed similar around Venus and Mars. The planetary thermal O(+) ions outside the ionopause interact with the shocked solar wind and excite electrostatic waves close to the lower hybrid frequency. These waves propagate inwards, heating first the electron and deeper down in the ionosphere the thermal ion population. The observed superthermal ions are believed to be the product of this wave particle interaction process. It is also concluded that the wave energy transferred to the thermal electrons is of the right magnitude (about 4 x 10 exp 9 eV/sq cm s) to provide the supplemental heat source necessary to reconcile observed and calculated electron temperatures in the ionosphere.

Szego, K.↗

The Method of Space-time Conservation Element and Solution Element: Development of a New Implicit Solver

The method of space-time conservation element and solution element is a nontraditional numerical method designed from a physicist's perspective, i.e., its development is based more on physics than numerics. It uses only the simplest approximation techniques and yet is capable of generating nearly perfect solutions for a 2-D shock reflection problem used by Helen Yee and others. In addition to providing an overall view of the new method, we introduce a new concept in the design of implicit schemes, and use it to construct a highly accurate solver for a convection-diffusion equation. It is shown that, in the inviscid case, this new scheme becomes explicit and its amplification factors are identical to those of the Leapfrog scheme. On the other hand, in the pure diffusion case, its principal amplification factor becomes the amplification factor of the Crank-Nicolson scheme.

Chang, S. C.↗

Nonthermal radio emission from hot star winds: Its origin and physical implications

Nonthermal radio emission has been observed from some of the most luminous hot star winds. It is understood to be synchrotron radiation of the relativistic electrons in the winds. To understand how the electrons are accelerated to such high energies and to correctly explain the observed radio flux and spectra require an exhaustive investigation of all the relevant physical processes involved and possibly point to a complex wind structure. In this paper we discuss the logical path toward a comprehensive model of the nonthermal radio emission from hot star winds. Based on the available observational data and fundamental theoretical considerations, we found that the only physically viable and self-consistent scenario is: the nonthermal radio emission is synchrotron radiation of relativistic electrons the electrons are accelerated by shocks via the first-order Fermi mechanism the acceleration has to be in situ in the radio emitting region and the shocks formed at the base of the winds have to propagate to beyond the radio photosphere.

Chen, Wan↗

CFD Analysis of Nozzle Jet Plume Effects on Sonic Boom Signature

A computational fluid dynamics study is conducted to examine nozzle exhaust jet plume effects on the Sonic boom signature of a supersonic aircraft. A simplified axisymmetric nozzle geometry, representative of the nozzle on the NASA Dryden NF-15B Lift and Nozzle Change Effects on Tail Shock research airplane, is considered. The computational fluid dynamics code is validated using available wind-tunnel sonic boom experimental data. The effects of grid size, spatial order of accuracy. grid type, and flow viscosity on the accuracy of the predicted sonic boom pressure signature are quantified. Grid lines parallel to the Mach wave direction are found to give the best results. Second-order accurate upwind methods are required as a minimum for accurate sonic boom simulations. The highly underexpanded nozzle flow is found to provide significantly more reduction in the tail shock strength in the sonic boom N-wave pressure signature than perfectly expanded and overexpanded nozzle flows. A tail shock train in the sonic boom signature is observed for the highly underexpanded nozzle flow. Axisymmetric computational fluid dynamics simulations show the flow physics inside the F-15 nozzle to be nonisentropic and complex.

Bui, Trong T.↗

Time-Frequency Analysis of Rocket Nozzle Wall Pressures During Start-up Transients

Surveys of the fluctuating wall pressure were conducted on a sub-scale, thrust- optimized parabolic nozzle in order to develop a physical intuition for its Fourier-azimuthal mode behavior during fixed and transient start-up conditions. These unsteady signatures are driven by shock wave turbulent boundary layer interactions which depend on the nozzle pressure ratio and nozzle geometry. The focus however, is on the degree of similarity between the spectral footprints of these modes obtained from transient start-ups as opposed to a sequence of fixed nozzle pressure ratio conditions. For the latter, statistically converged spectra are computed using conventional Fourier analyses techniques, whereas the former are investigated by way of time-frequency analysis. The findings suggest that at low nozzle pressure ratios -- where the flow resides in a Free Shock Separation state -- strong spectral similarities occur between fixed and transient conditions. Conversely, at higher nozzle pressure ratios -- where the flow resides in Restricted Shock Separation -- stark differences are observed between the fixed and transient conditions and depends greatly on the ramping rate of the transient period. And so, it appears that an understanding of the dynamics during transient start-up conditions cannot be furnished by a way of fixed flow analysis.

Baars, Woutijn J.↗

Earth-Affecting Solar Causes Observatory (EASCO): A Potential International Living with a Star Mission from Sun-Earth L5

This paper describes the scientific rationale for an L5 mission and a partial list of key scientific instruments the mission should carry. The L5 vantage point provides an unprecedented view of the solar disturbances and their solar sources that can greatly advance the science behind space weather. A coronagraph and a heliospheric imager at L5 will be able to view CMEs broadsided, so space speed of the Earth-directed CMEs can be measured accurately and their radial structure discerned. In addition, an inner coronal imager and a magnetograph from L5 can give advance information on active regions and coronal holes that will soon rotate on to the solar disk. Radio remote sensing at low frequencies can provide information on shock-driving CMEs, the most dangerous of all CMEs. Coordinated helioseismic measurements from the Sun Earth line and L5 provide information on the physical conditions at the base of the convection zone, where solar magnetism originates. Finally, in situ measurements at L5 can provide information on the large-scale solar wind structures (corotating interaction regions (CIRs)) heading towards Earth that potentially result in adverse space weather.

Gopalswamy, N.↗

High-Order Finite-Difference Large-Eddy Simulations of a Supersonic Nozzle

Large-eddy simulations of the flow emanating from supersonic nozzles were carried out for the 6th Propulsion Aerodynamics Workshop to be held at the AIAA SciTech Conference. The purpose of the work is to detail the ability of a high-order of accuracy finite-difference based numerical scheme to accurately compute this flow. Results for both a perfectly expanded and over-expanded flow case are presented. Several complicating factors are discussed: 1) the limitations on the computational grid imposed by the numerical method, 2) the effect of additional dissipation necessary to resolve shock waves and 3) the effect of the nozzle boundary layer on the flow. Results indicate that the simulations replicate the basic flow physics, but there is room for improvement in accuracy. Areas for future study are outlined.

turbulence↗