Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “remote handling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

The Development of Real-Time Physiological Monitoring and Training Software for Remote Applications

Autogenic Feedback Training Exercise (AFTE) is an protocol and technology developed by Dr. Patricia Cowings and her associates at NASA Ames Research Center as a means to facilitate astronaut adaptation to space and exposure to the microgravity. AFTE is a training method which involves teaching subjects to voluntarily control several of their own physiological responses to environmental stressors. As the procedures matured, the training program was expanded to determine if technology developed to facilitate astronaut adaptation to space would be valuable in treating patients suffering from autonomic and vestibular pathologies and symptomatic relief from nausea and/or blood pressure control anomalies such as hypo- or hypertension. The present study, performed in conjunction with Morehouse School of Medicine, Biomedical Engineering at The University of Akron and NASA Ames Research Center has demonstrated that this technology can be successfully applied over vast distances. The specific purpose of this research was to develop a PC based system which could handle processing of twenty channels of acquired physiological data in addition to the necessary duplex communication protocols that would, for example, permit a patient in Atlanta, GA to be trained by a clinician stationed in San Jose, CA. Sixteen channels of physiological data and 20 channels of processed data are included.

Source record↗
NASA NTRSDate not supplied

TPSAS-NF1676L-18074-DND

Motivations - Radiative Transfer (RT) model is a component in satellite remote sensing (Observation System Simulation Experiment, sensor performance end-to-end simulations or sensitivity studies, and retrieval and data assimilations); - Line-by-line RT model is too slow, over a million RT needed to cover infrared spectral region; - Traditional Channel-based RT models deal with one channel at a time. Modern sensors have thousands of channels and 0.1-1 million spectra per day, only 4-10% of data are used in satellite data assimilations (too slow for climate OSSE). It is essential to have a RT model: - Accurate and fast - Works in all spectral regions - Includes as accurate physics as possible - Takes advantage of spectral correlations - Can handle cloud and aerosols PCRTM (Principal Component-based Radiative Transfer model) was developed to satisfy the need listed above.

Xu Liu↗
NASA NTRS1984

Integrated remote sensing of the earth from low earth orbit in the 1990's

Trends in the areas of science, data systems, instruments and space technologies and their related infrastructures that will be experienced in earth remote sensing activities from LEO in the 1990s are discussed. Interdisciplinary studies will examine the flow of energy through the earth system, encompassing surveys of atmospheric and ocean circulations, the hydrologic cycle, and biogeochemical cycles. Mainframe computer assimilation of large data inputs will be associated with distributed microcomputer processing and analyses. Single satellite antennas will scan several microwave frequencies simultaneously, e.g., taking data on vegetation, water, and ice. Broadening the range of simultaneous observations will require multiinstrumented free-flying platforms, placed in orbit, repaired and/or retrieved by the Shuttle. Future instrumentation will include visible/IR imagers and the multifrequency microwave sounders with capabilities mainly limited by the availability of sufficient data-handling facilities.

Butler, D. M.↗
NASA NTRS1994

The ordnance transfer interrupter: A new type of S & A device

A discussion is given in this paper of a new approach to the Safing and Arming of aerospace ordnance systems interconnected by detonation transfer lines, in which the conventional type of S&A device normally used for this purpose is replaced by a relatively simple electro-mechanical switching device, referred to as an 'Interrupter.' In this approach the Interrupter, which is interposed in the transfer line between the system initiator and output device, is completely passive in that it contains no pyrotechnic devices or materials. Being passive (therefore, non-initiating), the Interrupter is much less hazardous to handle and install, as well as being significantly less complex and costly than conventional S&A devices containing EED's and explosive leads. Details are presented relative to the design, development and qualification, by PS/EDD, of an ordnance transfer Interrupter intended for use on a commercial launch missile. This device, which is capable of simultaneously 'switching' multiple detonation transfer lines, incorporates a rod-type rotary barrier with independent transverse apertures for each transfer line. Barrier actuation is bi-modal, i.e., the barrier can be driven from safe-to-arm or from arm-to-safe positions by independent electro-mechanical actuators. The Interrupter described also features visual and remote status monitoring provisions and, in common with range-approved conventional S&A devices, a pre-flight safety locking mechanism functioned by a removable safing key.

Greenslade, John T.↗
NASA NTRS1989

A rapid prototyping/artificial intelligence approach to space station-era information management and access

Applications of rapid prototyping and Artificial Intelligence techniques to problems associated with Space Station-era information management systems are described. In particular, the work is centered on issues related to: (1) intelligent man-machine interfaces applied to scientific data user support, and (2) the requirement that intelligent information management systems (IIMS) be able to efficiently process metadata updates concerning types of data handled. The advanced IIMS represents functional capabilities driven almost entirely by the needs of potential users. Space Station-era scientific data projected to be generated is likely to be significantly greater than data currently processed and analyzed. Information about scientific data must be presented clearly, concisely, and with support features to allow users at all levels of expertise efficient and cost-effective data access. Additionally, mechanisms for allowing more efficient IIMS metadata update processes must be addressed. The work reported covers the following IIMS design aspects: IIMS data and metadata modeling, including the automatic updating of IIMS-contained metadata, IIMS user-system interface considerations, including significant problems associated with remote access, user profiles, and on-line tutorial capabilities, and development of an IIMS query and browse facility, including the capability to deal with spatial information. A working prototype has been developed and is being enhanced.

Carnahan, Richard S., Jr.↗
NASA NTRS2018

NASA's EOSDIS Near Term Challenges

Given the long-term requirements, and the rapid pace of information technology and changing expectations of the user community, the ESDIS Project has had to evolve EOSDIS continually over the past three decades. However, many challenges remain. One near-term challenge is the enormous quantity of new data that will need to be managed by the EOSDIS. With the upcoming launch of the latest NASA missions coupled with existing operational missions and field campaigns, EOSDIS can expect to handle as much as 50 petabytes of data per year. In perspective, this is twice the size of the current existing archive, which took over 21 years to collect. Another continuing challenge is the disparate requirements of a diverse science community. Maintaining rigorous long-term data preservation, supporting ease of discovery and access, incorporating user feedback, enabling reanalysis/ reprocessing, and agile integration of new data sources, continue to be the Project's objectives.

Remote Sensing↗
NASA NTRS2021

Status of the Moderate-resolution Imaging Spectroradiometer Level 1B Algorithm

The Moderate-resolution Imaging Spectroradiometer (MODIS) instruments are on-board the Aqua and Terra spacecraft, launched in 2002 and 1999, respectively. Since beginning operation, they have continued to collect valuable remote sensing data of the Earth in 36 spectral bands ranging in wavelengths from 0.41 to 14.5 μm. The Level 1B (L1B) algorithm produces calibrated top of the atmosphere (TOA) radiances for each Earth-view (EV) pixel and calibrated TOA reflectances for the reflective solar bands using geo-located, uncalibrated instrument data and calibration look up tables (LUTs) produced regularly by the MODIS Characterization Support Team (MCST). The L1B algorithm also calculates an uncertainty value for each EV pixel. The calibrated radiance and reflectance products are used to generate higher-level science products. A separate L1B code version is maintained for both MODIS instruments so that sensor specific issues can be handled individually. The current L1B algorithm version produces the Collection 6.1 (C6.1) products and was released in 2017. An overview of the C6.1 algorithm is provided together with improvements made since its release. Also discussed briefly are the planned improvements in the Collection 7 L1B algorithm.

MODIS↗
NASA NTRS2008

A System Trade Study of Remote Infrared Imaging for Space Shuttle Reentry

A trade study reviewing the primary operational parameters concerning the deployment of imaging assets in support of the Hypersonic Thermodynamic Infrared Measurements (HYTHIRM) project was undertaken. The objective was to determine key variables and constraints for obtaining thermal images of the Space Shuttle orbiter during reentry. The trade study investigated the performance characteristics and operating environment of optical instrumentation that may be deployed during a HYTHIRM data collection mission, and specified contributions to the Point Spread Function. It also investigated the constraints that have to be considered in order to optimize deployment through the use of mission planning tools. These tools simulate the radiance modeling of the vehicle as well as the expected spatial resolution based on the Orbiter trajectory and placement of land based or airborne optical sensors for given Mach numbers. Lastly, this report focused on the tools and methodology that have to be in place for real-time mission planning in order to handle the myriad of variables such as trajectory ground track, weather, and instrumentation availability that may only be known in the hours prior to landing.

Schwartz, Richard J.↗
NASA NTRS1989

Lunar deep drill apparatus

Proposed as a baseline configuration, this rotary drill apparatus is designed to produce 100-mm diameter holes in the lunar surface at depths up to 50 meters. The drill is intended to acquire samples for scientific analysis, mineral resource location, calibration of electronic exploration devices, and foundation analysis at construction sites. It is also intended to prepare holes for emplacement of scientific instruments, the setting of structural anchors, and explosive methods in excavation and mining activities. Defined as a deep drill because of the modular drill string, it incorporates an automatic rod changer. The apparatus is teleoperated from a remote location, such as earth, utilizing supervisory control techniques. It is thus suitable for unmanned and man-tended operation. Proven terrestrial drilling technology is used to the extent it is compatible with the lunar environment. Augers and drive tubes form holes in the regolith and may be used to acquire loose samples. An inertial cutting removal system operates intermittently while rock core drilling is in progress. The apparatus is carried to the work site by a three-legged mobile platform which also provides a 2-meter feed along the hole centerline, an off-hole movement of approximately .5 meters, an angular alignment of up to 20 deg. from gravity vertical, and other dexterity required in handling rods and samples. The technology can also be applied using other carriers which incorporate similar motion capabilities. The apparatus also includes storage racks for augers, rods, and ancillary devices such as the foot-plate that holds the down-hole tooling during rod changing operations.

Source record↗
DOE OSTI2025

WRPS Hanford Update [Slides]

The purpose of this report is to coordinate with the staff from WRPS, the current contract holder for operations at the Hanford site to better inform design decisions for the Autonomous systems for Hanford waste tank handling project. The project goals are to support risk reduction associated with monitoring, inspection and mapping of Hanford tank underground pits and includes: 1. A pit mock-up demonstration of Idaho National Laboratory’s (INL) Autonomous Pit Exploration System (APES) technology, which has two configurations: A. The Autonomous Robotic Arm, which is a proposed collaboration with Florida International University (FIU) and has capabilities to visually inspect, monitor, map and conduct simple tool manipulation tasks in the tank pits, and B. The robotic crawler configuration, which has capabilities to deploy to the bottom of the pits and conduct closer and bottom-up visual inspections. 2. An Implementation Plan that identifies Hanford site-wide application of the INL remote robotics technologies to enhance the performance of the tank farm systems and the characterization of the waste they contain to mitigate risk and optimize the overall waste mission. 3. A first-of-a-kind environmental digital twin will be produced. Digital twins to date require permanently installed sensors in order to produce asset specific predictions. This project will use the intermittent signals during inspections from deployed sensors on robotic systems to produce the data sets used by AI/ML to enable predictions of issues on tanks.

42 - ENGINEERING↗
NASA NTRS2004

Mobile Autonomous Humanoid Assistant

A mobile autonomous humanoid robot is assisting human co-workers at the Johnson Space Center with tool handling tasks. This robot combines the upper body of the National Aeronautics and Space Administration (NASA)/Defense Advanced Research Projects Agency (DARPA) Robonaut system with a Segway(TradeMark) Robotic Mobility Platform yielding a dexterous, maneuverable humanoid perfect for aiding human co-workers in a range of environments. This system uses stereo vision to locate human team mates and tools and a navigation system that uses laser range and vision data to follow humans while avoiding obstacles. Tactile sensors provide information to grasping algorithms for efficient tool exchanges. The autonomous architecture utilizes these pre-programmed skills to form human assistant behaviors. The initial behavior demonstrates a robust capability to assist a human by acquiring a tool from a remotely located individual and then following the human in a cluttered environment with the tool for future use.

Diftler, M. A.↗
NASA NTRS1994

The development and operation of the international solar-terrestrial physics central data handling facility

The National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) International Solar-Terrestrial Physics (ISTP) Program is committed to the development of a comprehensive, multi-mission ground data system which will support a variety of national and international scientific missions in an effort to study the flow of energy from the sun through the Earth-space environment, known as the geospace. A major component of the ISTP ground data system is an ISTP-dedicated Central Data Handling Facility (CDHF). Acquisition, development, and operation of the ISTP CDHF were delegated by the ISTP Project Office within the Flight Projects Directorate to the Information Processing Division (IPD) within the Mission Operations and Data Systems Directorate (MO&DSD). The ISTP CDHF supports the receipt, storage, and electronic access of the full complement of ISTP Level-zero science data; serves as the linchpin for the centralized processing and long-term storage of all key parameters generated either by the ISTP CDHF itself or received from external, ISTP Program approved sources; and provides the required networking and 'science-friendly' interfaces for the ISTP investigators. Once connected to the ISTP CDHF, the online catalog of key parameters can be browsed from their remote processing facilities for the immediate electronic receipt of selected key parameters using the NASA Science Internet (NSI), managed by NASA's Ames Research Center. The purpose of this paper is twofold: (1) to describe how the ISTP CDHF was successfully implemented and operated to support initially the Japanese Geomagnetic Tail (GEOTAIL) mission and correlative science investigations, and (2) to describe how the ISTP CDHF has been enhanced to support ongoing as well as future ISTP missions. Emphasis will be placed on how various project management approaches were undertaken that proved to be highly effective in delivering an operational ISTP CDHF to the Project on schedule and within budget. Examples to be discussed include: the development of superior teams; the use of Defect Causal Analysis (DCA) concepts to improve the software development process in a pilot Total Quality Management (TQM) initiative; and the implementation of a robust architecture that will be able to support the anticipated growth in the ISTP Program science requirements with only incremental upgrades to the baseline system. Further examples include the use of automated data management software and the implementation of Government and/or industry standards, whenever possible, into the hardware and software development life-cycle. Finally, the paper will also report on several new technologies (for example, the installation of a Fiber Data Distribution Interface network) that were successfully employed.

Lehtonen, Kenneth↗
NASA NTRS1998

Locating Biodiversity Data Through The Global Change Master Directory

The Global Change Master Directory (GCMD) presently holds descriptions for almost 7000 data sets held worldwide. The directory's primary purpose is for data discovery. The information provided through the GCMD's Directory Interchange Format (DIF) is the set of information that a researcher would need to determine if a particular data set could be of value. By offering data set descriptions worldwide in many scientific disciplines - including meteorology, oceanography, ecology, geology, hydrology, geophysics, remote sensing, paleoclimate, solar-terrestrial physics, and human dimensions of climate change - the GCMD simplifies the discovery of data sources. Direct linkages to many of the data sets are also provided. In addition, several data set registration tools are offered for populating the directory. To search the directory, one may choose the Guided Search or Free-Text Search. Two experimental interfaces were also made available with the latest software release - one based on a keyword search and another based on a graphical interface. The graphical interface was designed in collaboration with the Human Computer Interaction Laboratory at the University of Maryland. The latest version of the software, Version 6, was released in April, 1998. It features the implementation of a scheme to handle hierarchical data set collections (parent-child relationships); a hierarchical geospatial location search scheme; a Java-based geographic map for conducting geospatial searches; a Related-URL field for project-related data set collections, metadata extensions (such as more detailed inventory information), etc.; a new implementation of the Isite software; a new dataset language field; hyperlinked email addresses, and more. The key to the continued evolution of the GCMD is in the flexibility of the GCMD database, allowing modifications and additions to made relatively easily to maintain currency, thus providing the ability to capitalize on current technology while importing all existing records. Changes are discussed and approved through an online "interoperability" forum. The next major release of the GCMD is scheduled for early 1999 and will include the incorporation of a new matrix-based interface, a rapid valids-based query system; improvement in the operations facility - important for future distributed options; new streamlined code for greater performance and maintainability; improvements in the handling of seven current fields proposed through the interoperability forum (at no expense to the data providers); and the release of DOCmorph, a more robust version of DIFmorph to translate many 'standards' multi-directionally. Issues and actions will also be addressed.

Olsen, Lola M.↗
NASA NTRS1998

Investigation of EM Emissions by the Electrodynamic Tether, Inclusive of an Observational Program (EMET)

Our TSS-1/R investigation, which we shall refer to as EMET in this report, was an integral part of the effort by the TSS-1/R Investigators' Working Group (IWG) to come to an understanding of the complex interaction between the tethered satellite system and the ionosphere. All of the space-borne experiments were designed to collect data relevant to the local interaction. Only the ground- based experiments, EMET and its Italian counterpart Observations on the Earth's Surface of Electromagnetic Emissions (OESEE), held out any hope of characterizing the long range effects of the interaction. This was to be done by detecting electromagnetic waves generated by the system in the ionosphere, assuming the signal reached the Earth's surface with sufficient amplitude. As the type of plasma waves excited to carry charge away from the charge-exchange regions of the system at each end of the tether is one of the theoretical points about which there is greatest disagreement, a definitive identification of tether-generated waves could mark significant progress in the so-called current closure problem of electrodynamic tethers. Dr. Mario Grossi of the Smithsonian Astrophysical Observatory (SAO) initiated the investigation, and his experience in the field of ULF-ELF waves and their detection was invaluable throughout its course. Rice University had the responsibility of setting up the EMET ULF-VLF ground stations under a subcontract from SAO. Principal Investigator (PI) for the Rice effort was Prof. William E. Gordon, who was primary observer at the Arecibo Observatory during TSS-LR. Dr. Steve Noble handled major day-to-day operations, training, and planning for the ground-based measurements. Dr. James McCoy of NASA JSC, a member of the Mona/Arecibo team, was pilot for the numerous flights ferrying personnel and equipment between Puerto Rico and Mona Island. Final responsibility for the measurements rested with SAO, and the activities of field personnel and SAO investigators were closely co-ordinated during the mission. Dr. Enrico Lorenzini of SAO served as the eyes, ears, and brain of EMET in the Science Operations Area and PI table during the mission, whenever the PI was absent during the round-the-clock mission operations. The Rice University final report to SAO, which is included as an Appendix, contains details of the remote sites, means of communication, sensors, etc., as well as the affiliations of personnel involved in the data-gathering effort.

Estes, Robert D.↗
DOE OSTI2023

JIRIAF: JLAB Integrated Research Infrastructure Acros Facilities

The JIRIAF project aims to combine geographically diverse computing facilities into an integrated science infrastructure. This project starts by dynamically evaluating temporarily unallocated or idled compute resources from multiple providers. These resources are integrated to handle additional workloads without affecting local running jobs. This paper describes our approach to launch best-effort batch tasks which exploit these underutilized resources. Our system measures the real-time behavior of jobs running on a machine and learns to distinguish typical performance from outliers. Unsupervised ML techniques are used to analyze hardware-level performance measures, followed by a real-time cross-correlation analysis to determine which applications cause performance degradation. We then ameliorate bad behavior by throttling these processes. We demonstrate that problematic performance interference can be detected and acted on, which makes it possible to continue to share resources between applications and simultaneously maintain high utilization levels in a computing cluster. We relocate the CLAS12 data processing workflow to a remote data center for a case study, preventing file migration and temporal data persistency.

Lawrence, David↗
DOE OSTI2021

A Self-Synchronizing Underwater Acoustic Network for Mooring Load Monitoring of a Wave Energy Converter

This paper reports on the development of a self-synchronizing underwater acoustic network developed for remote monitoring of mooring loads in Wave Energy Converters (WECs). This network uses Time Division Multiple Access and operates self-contained with the ability for users to remotely transmit commands to the network as needed. Each node is a self-contained unit, consisting of a protocol adaptor board, an FAU-DPAM underwater acoustic modem and a battery pack. A node can be connected to a load cell, to a topside user or to the WEC. Every node is swapable. The protocol adaptor board, named Protocol Adaptor for Digital LOad Cell (PADLOC) supports a variety of digital load cell message formats (CAN, MODBUS, custom ASCII) and underwater acoustic modem serial formats. PADLOC enables topside users to connect to separate load cells through a user-specific command. This is especially important if the user is monitoring multiple load cells during deployment or maintenance, when the primary data system may be offline. Each PADLOC board handles formatting, buffering and has a one-on-one serial connection with each pair (node) of a digital load cell and acoustic modem. In addition, each PADLOC board handles the timekeeping and power saving features for each node. The only limitation is the data bit rate and delay limitations associated with the underwater acoustic modem. A four node self-synchronizing network has been developed to demonstrate the load cell monitoring capability using the PADLOC technology on the CalWave WEC.

acoustic↗
DOE OSTI2025

Power Quality and Load Capacity Evaluations of an Electric Vehicle for Multi-Robot System Applications

This paper evaluates the capability of a fully electric pickup truck, using the Ford F-150 Lightning as an example, to provide power to the circuit of a multi-robot system. The case study was conducted on a simulated INL Autonomous Pit Exploration System (APES) designed for the inspection of nuclear waste tank pits. Through a series of controlled tests, the vehicle’s power delivery consistency, load-handling capability, and battery performance were assessed under various conditions. First of all, the load test demonstrated that the vehicle provided stable power with low distortion and no unexpected interruptions. Second, during the operational limit test, the 240V system sustained loads up to 7.4 kW before tripping, providing insights into its operational limits. Last but not least, during a simulated full-scale APES operation, the vehicle’s battery depleted by only 6% over an hour, indicating sufficient capacity for extended use while retaining reserve power for transportation needs. This study highlights the potential of electric vehicles as reliable power sources for field operations, contributing to the advancement of sustainable technologies by reducing reliance on traditional fossil fuel generators and promoting the integration of clean energy solutions in remote and challenging environments.

Electric vehicle↗
DOE OSTI2025

IEEE SusTech 2025 Presentation

This paper evaluates the capability of a fully electric pickup truck, using the Ford F-150 Lightning as an example, to provide power to the circuit of a multi-robot system. The case study was conducted on a simulated INL Autonomous Pit Exploration System (APES) designed for the inspection of nuclear waste tank pits. Through a series of controlled tests, the vehicle’s power delivery consistency, load-handling capability, and battery performance were assessed under various conditions. First of all, the load test demonstrated that the vehicle provided stable power with low distortion and no unexpected interruptions. Second, during the operational limit test, the 240V system sustained loads up to 7.4 kW before tripping, providing insights into its operational limits. Last but not least, during a simulated full-scale APES operation, the vehicle’s battery depleted by only 6\% over an hour, indicating sufficient capacity for extended use while retaining reserve power for transportation needs. This study highlights the potential of electric vehicles as reliable power sources for field operations, contributing to the advancement of sustainable technologies by reducing reliance on traditional fossil fuel generators and promoting the integration of clean energy solutions in remote and challenging environments.

42 - ENGINEERING↗