Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “process importance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Imaging the structural organization of chemical elements in growth cones of developing hippocampal neurons

Abstract During neurodevelopment, neurons form growth cones, F-actin rich extensions located at the distal end of the neurites. Growth cones allow dendrites and axons to build synaptic connections through a process of neurite guidance whose mechanisms have not been fully elucidated. Calcium is an important element in this process by inducing F-actin reorganization. We hypothesized that other biologically active elements might be involved in the growth cone-mediated neurite guidance mechanisms. We performed super resolution and confocal microscopy of F-actin, followed by synchrotron X-ray fluorescence microscopy of phosphorous, sulfur, chlorine, potassium, calcium, iron and zinc on growth cones from primary rat hippocampal neurons. We identified two main patterns of element organization. First, active growth cones presenting an asymmetric distribution of Ca co-localized with the cytoskeleton protein F-actin. In active growth cones, we found that the distributions of P, S, Cl, K, and Zn are correlated with Ca. This correlation is lost in the second pattern, quiescent growth cones, exhibiting a spread elemental distribution. These results suggest that Ca is not the only element required in the F-actin rich active regions of growth cones. In addition, highly concentrated Fe spots of submicrometer size were observed in calcium-rich areas of active growth cones. These results reveal the need for biological active elements in growth cones during neural development and may help explain why early life deficiencies of elements, such as Fe or Zn, induce learning and memory deficits in children.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Identification and Quantification of Technetium Species in Hanford Waste Tank AN-102

Technetium-99 (Tc) generated from the fission of 235U and 239Pu in high yields is one of the most difficult contaminants to be addressed at the U.S. Department of Energy Hanford Site. In strongly alkaline solutions typifying Hanford tank waste, Tc exists as pertechnetate (TcO4-) (oxidation state VII) as well as in reduced forms (oxidation state < VII) collectively known as non-pertechnetate species. Designing strategies for effective Tc management, including separation and immobilization, necessitates understanding the molecular structure of the non- pertechnetate species and their identification in the actual tank waste samples, which would facilitate development of new treatment technologies effective for dissimilar Tc species. Toward this objective, a spectroscopic library of the Tc(I) [fac-Tc(CO)3]+ and Tc(IV, VII) compounds was generated using a range of techniques and applied to the characterization of the actual tank waste supernatant collected from the tank 241-AN-102 at Hanford, WA. A sample of the 241-AN-102 tank waste supernatant was processed to adjust Na concentration to about 5.6 M and remove 137Cs by spherical resorcinol-formaldehyde (sRF) ion exchange resin. Cesium-loaded sRF column was eluted with 0.5 M HNO3. As received AN-102, Cs-depleted AN-102 effluent, and sRF eluate fractions were comprehensively characterized for chemical composition and speciation of Tc using 99Tc nuclear magnetic resonance spectroscopy and X-ray absorption spectroscopy. It was demonstrated for the first time that non-pertechnetate Tc present in the 241-AN-102 tank waste is composed of several low-valent Tc species, including the Tc(I) [fac-Tc(CO)3]+ and Tc(IV) compounds. This is the second experimental observation of the [fac-Tc(CO)3]+ species in the Hanford tank waste and the first demonstration of multiple forms of non-pertechnetate species existing simultaneously in the waste, cumulatively highlighting their importance for the waste processing.

Low Activity Waste (LAW), High Level Waste, nuclea↗
DOE OSTI2020

Permanently Magnetized Insulating Thin-Film Devices by Reduction

A reduction-based manufacturing process for creating technologically important multilayer structures from lattice-matched ferromagnetic insulators and ferromagnetic conductors is reported. The process is demonstrated by growing a permanently magnetized double-layer structure, consisting of lattice-matched conducting (Ni,Co) and insulating (Ni 0.4 Co 0.6 ) 3 O 3 layers, through a single deposition cycle. The orientation of the metal cation network is preserved after reduction. Close-packing displacements of Ni and Co take place in such a manner that the in-plane hexagonal arrangement is preserved. This is critical for ensuring high-quality interfaces joining the layers. At room temperature the hysteresis loop is centered. At low temperature the oxide layer becomes ferrimagnetically ordered, accompanied by a shift of the hysteresis loop along the magnetic field axis. The shift is assigned to exchange bias phenomenon. Biaxial compressive strain is responsible for the required ferrimagnetic ordering. Finally, spin valves and closely related magnetoresistance random access memory and spin-transfer-torque magnetic random access memory devices are addressed as potential applications.

42 ENGINEERING↗
DOE OSTI2026

The effect of varying powder feedstock chemistry and printing atmosphere on the microstructure of additively manufactured nickel-based ODS alloys: Role on stabilization of cellular structures vs. oxide dispersion formation

Nickel-based alloys have a wide variety of structural applications due to their high corrosion resistance and mechanical strength which depend on solid solution strengthening, or the formation of oxides and/or intermetallic precipitation for their properties. In this study, the microstructure of six Ni–Cr–Y–Ti–Al powder batches designed for the production of oxide dispersion strengthened nickel were compared. These batches varied in chemistry and atomization technique used which included Gas Atomization Reactive Synthesis (GARS). The batches of powder were then consolidated via Additive Manufacturing (AM) Powder Bed Fusion using Laser Beam (PBF-LB) and characterized via transmission electron microscopy to elucidate the influence of powder feedstock (i.e. synthesis methodology and chemistry) on the PBF-LB microstructure. The study investigates (i) how the amount of yttrium and titanium additions in the powder feedstock and the addition of oxygen during the processing (through GARS) affect the microstructure of the powder itself and the AM printed microstructure, and (ii) how the control of oxygen addition in the printing atmosphere during the PBF-LB printing process itself is another important parameter for achieving the formation of the wanted oxide dispersion versus the stabilization of the cellular structure (often observed in AM processed alloys). Microstructural characterization of both powder particles and additively manufactured nickel alloys in this study provide important insights into the movement of yttrium within the material upon solidification, particularly along cell boundaries, and how yttrium behaves depending on alloy chemistry. When a threshold of yttrium content is reached within the system, yttrium consistently reacts to form an intermetallic along cell boundaries instead of forming oxide nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Materials Dynamics: Area of Leadership [Slides]

Materials Dynamics focuses on deterministic linkages between microstructure-properties-performance of materials at high strain rates and pressures. Understanding process-structure-propertiesperformance (PSPP) is increasingly important for new material qualification, accepting manufacturing process changes, and new materials development.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Critical statistical assessment of data in metal additive manufacturing

Obtaining high quality data reflecting the relationships between the additive manufacturing (AM) process parameters, material microstructure and mechanical properties is crucial for the use of machine learning in AM. A database of over 4,000 data entries of metal AM was created thanks to a large number of literature studies on key process parameters and indicators of build quality. Meta-analysis reveals critical biases in the literature. Firstly, majority of studies report only high quality builds, these imbalances in reporting result in weak correlation between process parameters, properties and consolidation, limiting the ability of machine learning models to generalize beyond optimized conditions. Nevertheless, the trained models accurately predict yield strength ($R^2 = 0.85$), suggesting that certain process–property relationships are effectively captured within these models. Secondly, quantitative microstructural data are largely absent, limiting the learning of the microstructure-mechanical properties relationships. Finally, current process window identification is based largely on the consolidation, despite significant uncertainty in its measurement. It is important to identify the process map on the basis of not only the consolidation, but also mechanical behaviour under loading. Such a identification shows that 316 L and Inconel have much larger process map (i.e. highly printable) in comparison to the AlSi10Mg and Ti6Al4V.

Additive manufacturing↗
DOE OSTI2022

Riverine bacterioplankton and phytoplankton assembly along an environmental gradient induced by urbanization

In the Anthropocene, human activities are intensifying stresses on biological communities across ecosystems. Knowledge on how environmental changes influence microbial community dynamics is crucial but currently limited. Here we unraveled ecological processes generating distribution patterns of bacterioplankton and phytoplankton communities in a river draining an urbanizing watershed in southern China. In this ecosystem, longitudinal environmental heterogeneity and directional flow potentially have counteracting effects on planktonic community assembly. Using simultaneously multiple approaches, we showed that the observed compositional patterns result from an interplay of stochastic and deterministic processes, indicating that dispersal via fluvial connectivity could not override local selective pressures. Successional shifts in the relative importance of the above processes were associated with trends in climatic factors. High diversity was observed at the intermediate levels of ecological processes alongside intense inter-species interactions maintained by a few keystone taxa. Altogether, interactions between climatic conditions, landscape and hydrology control plankton community dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Subpolar North Atlantic Water Mass Transformation and Overturning in Eddying and Non‐Eddying Simulations

Buoyancy forcing in the subpolar North Atlantic Ocean (SPNA) is an important driver of the Atlantic Meridional Overturning Circulation (AMOC). To advance understanding of the mechanisms connecting the two processes and their relative importance in sub-basins within the SPNA, we apply the Water Mass Transformation Framework to a matched-pair of forced, ocean-sea ice simulations configured at eddying and non-eddying resolution. Within the first decade of simulation, the non-eddying simulation produces a weak AMOC, ~11 Sv at 26.5 ° N, while the AMOC in the eddying simulation is more realistic and is thus analyzed for comparison. Surface water mass transformation and boundary transport are calculated in both density and temperature–salinity coordinates in three separate deep water formation regions, the Iceland Basin, the Irminger Sea and Labrador Sea, during the first decade of both simulations. We identify strong surface freshening in the Irminger and Labrador seas in the non-eddying simulation during the AMOC decline. This freshening significantly reduces the density of the surface outcrops where surface water mass formation occurs, essentially removing this contribution to deep water formation. Concurrently, boundary transports in these two regions are warmer and saltier in the non-eddying simulation compared to the eddying simulation where the density of surface water mass formation is stable. The warming and salinification of boundary transports in the non-eddying simulation is interpreted as an obstacle to deep water formation. Labrador Sea surface water mass transformation is important, despite its small contribution to buoyancy overturning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Phase‐Change‐Memory Process at the Limit: A Proposal for Utilizing Monolayer Sb 2 Te 3

Abstract One central task of developing nonvolatile phase change memory (PCM) is to improve its scalability for high‐density data integration. In this work, by first‐principles molecular dynamics, to date the thinnest PCM material possible (0.8 nm), namely, a monolayer Sb 2 Te 3 , is proposed. Importantly, its SET (crystallization) process is a fast one‐step transition from amorphous to hexagonal phase without the usual intermediate cubic phase. An increased spatial localization of electrons due to geometrical confinement is found to be beneficial for keeping the data nonvolatile in the amorphous phase at the 2D limit. The substrate and superstrate can be utilized to control the phase change behavior: e.g., with passivated SiO 2 (001) surfaces or hexagonal Boron Nitride, the monolayer Sb 2 Te 3 can reach SET recrystallization in 0.54 ns or even as fast as 0.12 ns, but with unpassivated SiO 2 (001), this would not be possible. Besides, working with small volume PCM materials is also a natural way to lower power consumption. Therefore, the proposed PCM working process at the 2D limit will be an important potential strategy of scaling the current PCM materials for ultrahigh‐density data storage.

2D limit↗
DOE OSTI2022

A separations and purification process for improving yields and meeting fuel contaminant specifications for high-octane gasoline produced from dimethyl-ether over a Cu/BEA catalyst

In this work, we have been developing a three-step conversion of biomass-derived syngas to methanol to dimethyl-ether (DME) to non-aromatic hydrocarbons for use as high-octane gasoline and sustainable aviation fuel. This process produces branched alkanes from DME using a Cu/BEA catalyst and is a promising alternative to other syngas conversion processes such as Fischer-Tropsch to linear alkanes and traditional ZSM-5 catalyzed methanol to aromatic gasoline. In this short article we describe some advances in our understanding related to separations and purification via the use of more detailed experimental speciation in an updated process model involving multiple phase equilibrium-based separation steps. Primary modeled reactor outlet constituents (and weight %) are: C3 and lighter hydrocarbon gases (11.1%), C4s (54.5%), H 2 (1.2%), CO 2 (2.9%), water (5.0%), unreacted DME (16.5%), methanol (2.3%), and C5+ hydrocarbons (6.4%). DME (the primary reactant) and H 2 recycle and reuse are important for the overall process efficiency, and the recycle of C4s is important to increase the C5+ yield via reactivation and homologation. Thus H 2 , C4s, and DME are targeted for recycle, while methanol and water need to be removed from the product to conform with fuel specifications. Model predictions from Aspen Plus using the NRTL-RK property method indicate a fuel composition with C5+ content of 97.1 wt%, with minor constituents: 2.4 wt% C4s, 0.3 wt% methanol, 0.1 wt% DME, 0.03 wt% water, and 0.01 wt% C3s. These ranges of minor components conform with fuel quality requirements, and the modeled product is amenable for unconstrained blending to boost gasoline octane ratings.

09 BIOMASS FUELS↗
DOE OSTI2022

GANISP: A GAN-Assisted Importance Splitting Probability Estimator

Designing manufacturing processes with high yield and strong reliability relies on effective methods for rare event estimation. Genealogical importance splitting reduces the variance of rare event probability estimators by iteratively selecting and replicating realizations that are headed towards a rare event. The replication step is difficult when applied to deterministic systems where the initial conditions of the offspring realizations need to be modified. Typically, a random perturbation is applied to the offspring to differentiate their trajectory from the parent realization. However, this random perturbation strategy may be effective for some systems while failing for others, preventing variance reduction in the probability estimate. This work seeks to address this limitation using a generative model such as a Generative Adversarial Network (GAN) to generate perturbations that are consistent with the attractor of the dynamical system. The proposed GAN-assisted Importance SPlitting method (GANISP) improves the variance reduction for the system targeted. An implementation of the method is available in a companion repository (https://github.com/NREL/GANISP).

generative adversarial network↗
DOE OSTI2025

qua-libs

Process (state) tomography provides complete information of a quantum system’s evolution(wavefunction) under a potentially noisy channel, from which important metrics such as process or gate (state) fidelities can be determined, which are used to benchmark a system.

Winer, Gal↗
DOE OSTI2021

Mechanism Across Scales: A Holistic Modeling Framework Integrating Laboratory and Field Studies for Microbial Ecology

Over the last century, leaps in technology for imaging, sampling, detection, high-throughput sequencing, and -omics analyses have revolutionized microbial ecology to enable rapid acquisition of extensive datasets for microbial communities across the ever-increasing temporal and spatial scales. The present challenge is capitalizing on our enhanced abilities of observation and integrating diverse data types from different scales, resolutions, and disciplines to reach a causal and mechanistic understanding of how microbial communities transform and respond to perturbations in the environment. This type of causal and mechanistic understanding will make predictions of microbial community behavior more robust and actionable in addressing microbially mediated global problems. To discern drivers of microbial community assembly and function, we recognize the need for a conceptual, quantitative framework that connects measurements of genomic potential, the environment, and ecological and physical forces to rates of microbial growth at specific locations. We describe the Framework for Integrated, Conceptual, and Systematic Microbial Ecology (FICSME), an experimental design framework for conducting process-focused microbial ecology studies that incorporates biological, chemical, and physical drivers of a microbial system into a conceptual model. Through iterative cycles that advance our understanding of the coupling across scales and processes, we can reliably predict how perturbations to microbial systems impact ecosystem-scale processes or vice versa. We describe an approach and potential applications for using the FICSME to elucidate the mechanisms of globally important ecological and physical processes, toward attaining the goal of predicting the structure and function of microbial communities in chemically complex natural environments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Use of Sensors and Machine Learning for Signal Discovery in a Solvent Extraction Process – 23280

Reprocessing is an important step in the nuclear fuel cycle where usable nuclear materials are extracted from spent fuel for recycling. The extraction of materials for reuse simultaneously reduces not only the volume of nuclear waste, but its decay time to radioactivity levels similar to that of the originating uranium ore. As part of an initiative to steward research, development, and innovation into the nuclear fuel cycle, Idaho National Laboratory is designing and constructing a solvent extraction testbed named Beartooth. Beartooth will allow researchers to refine extraction processes, test innovative extraction processes, and give early career scientists opportunities to gain skills in performing separations chemistry that uses centrifugal contactors. In addition, the Beartooth testbed is being uniquely designed to enable novel technologies including machine learning capabilities for the characterization of chemical process operations in near real-time. To aid in the design of Beartooth, a team of researchers are installing a variety of atypical sensors into a system of contactors for signal discovery. The team will implement machine learning methods on sensor data to determine signal features with the goal of providing a process operator with a deeper understanding of the chemical process and equipment usage. This work will summarize sensors utilized and preliminary results from an infrared camera.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Process for purification of malonic acid from fermentation broth

A process for the preparation of bio-based malonic acid and crystalline calcium malonate is provided. The calcium malonate is highly pure and provides a source of malonic acid made from a renewable carbon source rather than existing processes which rely on the use of petroleum-based products. The calcium malonate provides an improved source of malonic acid, which is important to many industrial processes.

09 BIOMASS FUELS↗
DOE OSTI2021

Impact of Precipitation Parameters on the Specific Surface Area of PuO 2

Controlling the properties of PuO 2 through processing is of vital importance to environmental transport and fate, production of nuclear fuels, nuclear forensic analyses, stockpile stewardship, and storage of nuclear wastes applications. A number of processing conditions have been identified to control final product properties, including specific surface area (SSA), residual carbon content, adsorption of volatile species, morphology, and particle size. In this paper, a novel approach is developed for the prediction of PuO 2 SSA via the synthetic route of Pu(IV) oxalate precipitation followed by calcination. The proposed model utilizes multivariate regression methodology and leave one out formalism to link Savannah River Site (SRS) precipitation and calcination production data to the SSA of the final product. A comparison among the models provides insight into the accuracy and ability to identify variations amongst the processing data. Additionally, the models may also be used to fit new data outside of the parameters explored in a production facility. Finally, the trained model was compared to a similarly trained conventional model form to illustrate the influence of precipitation parameters on the prediction of the final SSA. The models presented here attempt to provide new methods for more accurate prediction of the PuO 2 product properties in a production scale environment for key environmental and nuclear applications.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

How deep is your soil? Quantifying and spatially analyzing understudied deep soil in the United States

Deep soil is largely understudied and important in understanding biogeochemical processes in soil. Here, understudied soil is defined as the difference between soil studied to a known depth and the estimated bedrock depth. To understand more about deep soil, the understudied soil in the US was quantified and spatially analyzed using soil survey data and model estimates of bedrock depth. An equation was derived to find understudied soil using the dataset parameters “max lower depth studied”, “depth to bedrock”, and “likelihood of bedrock in the top 200 cm”. The survey data and bedrock model revealed that soil has been studied to an average depth of 1-2 meters, and the average depth to bedrock is 20 meters. Soil data density in the soil surveys was greatest in the West Coast, Midwest, and areas historically managed for agricultural, while the non-contiguous US and interior West were underrepresented. The soil had been studied deeper than the estimated soil depth in 455 out of 56,889 observation points concentrated in Alaska, California, Texas, Florida, Puerto Rico, and the US Virgin Islands. To understand the diversity and any taxonomic bias of the global soil data available, soil order was compared to US-based National Resource Conservation Service percentages and it was found that Oxisols, Alfisols, Ultisols, Andisols, and Histosols were overrepresented while Gelisols, Aridisols, Vertisols, Entisols, and Spodosols are underrepresented. Soil depth is important in exploring the complexity of biogeochemical processes that take place in soil.

Bedrock↗
DOE OSTI2023

Process Intensification for Direct Conversion of Biomass-Based Syngas to High Octane Gasoline

The conversion of lignocellulosic-derived carbon sources via the creation of a CO2 rich syngas stream provides means to produce liquid hydrocarbon fuels, with advancements intended to create a cost-competitive method of sequential conversion via methanol and dimethyl ether intermediates. Previously developed methods with Cu/Beta zeolites enabled the conversion of dimethyl ether to linear and branched hydrocarbons, with high selectivities towards products with high-octane fuel properties. Through process intensification, use of a single reactor to convert syngas to methanol and DME, then further to hydrocarbons, allows for reduced capitol and operation cost for the same chemistries that typically use 3 reactors instead of one. Utilization of commercially available methanol synthesis catalyst (Megamax 800, Clariant, CZA) and methanol dehydration catalyst with the Cu/Beta catalyst allowed for conversion into hydrocarbon products in this single reactor set up. Reactor configuration with CZA and alumina catalysts mixed with or stacked in a bed physically above the Cu/Beta catalyst provided a system for the direct conversion of the syngas to hydrocarbons with improved yields and selectivities with higher net C1 conversions for stacked bed configurations. Through control of the process conditions, greater conversion of C1 oxygenate intermediates (i.e., methanol and dimethyl ether) was achieved with concomitant increase in selectivities towards gasoline and jet fuel range olefin and paraffin products. Lower hydrocarbon number products and less naphthenes were observed for the conversion of syngas compared to DME conversion on only the Cu/Beta system with prominent selectivities observed for C4, C5, and C7 hydrocarbons. The DME and methanol formation rates, with understanding of the equilibria for both processes, were determined as important factors to allow for improved performance of the Cu/Beta. Determination of the factors which allow for tuning of selectivities and yields created an intensified process which allows for a "market-responsive" biorefinery design, which can produce high octane gasoline or jet fuel range hydrocarbons to meet demands for a more sustainable route to liquid fuels.

BIOMASS FUELS↗