Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “photon absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Investigation on the AgPt and AgPd hybrid alloy nanoparticles (HANPs) for the hybrid MoS 2 /ZnO/HANP UV photodetector application

We report hybrid photodetectors made of two or more nanomaterial components can offer the high potential for advanced photodetection applications with enhanced light absorption, improved efficiency and structural tunability. A hybrid UV photodetector (PD) configuration incorporating the plasmonic hybrid alloy nanoparticles (HANP), ZnO quantum dots (QDs) and MoS 2 nanoflakes, namely MoS2/ZnO/HANP PD, is demonstrated. The optimized MoS 2 /ZnO/HANP PD exhibits a high photocurrent of 5.66 mA at 0.34 mW/mm 2 under 385 nm illumination with two orders of improvement from the bare ZnO, which is one of the highest photocurrents by the ZnO-based PDs. It also demonstrates high figure-of-merits with the responsivity of 14,523 mA/W, detectivity of 8.13 x 10 11 jones, and external quantum efficiency (EQE) of 4,680 %, outperforming most of the ZnO-based hybrid architectures. The enhanced photoresponse is primarily attributed to the significantly enhanced hot electron generation by the AgPd HANPs and photocarrier collection through the ZnO QD layer. MoS 2 nanoflakes also provide additional photon absorption sites and boost the photo-carrier transfer process. HANPs are grown by adapting a dual-step solid-state dewetting process (SSD) approach and the superiority of AgPd HANPs is confirmed by systematic investigation, FDTD simulation and comparison of AgPt and AgPd HANPs.

MoS2↗

A split-step method to include electron–electron collisions via Monte Carlo in multiple rate equation simulations

A split-step numerical method for calculating ultrafast free-electron dynamics in dielectrics is introduced. The two split steps, independently programmed in C++11 and FORTRAN 2003, are interfaced via the presented open source wrapper. The first step solves a deterministic extended multi-rate equation for the ionization, electron–phonon collisions, and single photon absorption by free-carriers. The second step is stochastic and models electron–electron collisions using Monte-Carlo techniques. This combination of deterministic and stochastic approaches is a unique and efficient method of calculating the nonlinear dynamics of 3D materials exposed to high intensity ultrashort pulses. Results from simulations solving the proposed model demonstrate how electron–electron scattering relaxes the non-equilibrium electron distribution on the femtosecond time scale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Femtosecond laser and swift-ion damage in lithium niobate: A comparative analysis

Relevant damage features associated with femtosecond pulse laser and swift-ion irradiations on LiNbO{sub 3} crystals are comparatively discussed. Experiments described in this paper include irradiations with repetitive femtosecond-laser pulses (800 nm, 130 fs) and irradiation with O, F, Si, and Cl ions at energies in the range of 0.2-1 MeV/amu where electronic stopping power is dominant. Data are semiquantitatively discussed by using a two-step phenomenological scheme. The first step corresponds to massive electronic excitation either by photons (primarily three-photon absorption) or ions (via ion-electron collisions) leading to a dense electron-hole plasma. The second step involves the relaxation of the stored excitation energy causing bond breaking and defect generation. It is described at a phenomenological level within a unified thermal spike scheme previously developed to account for damage by swift ions. A key common feature for the two irradiation sources is a well-defined intrinsic threshold in the deposited energy density U{sub th} required to initiate observable damage in a pristine crystal: U{sub th}{approx_equal}1.3x10{sup 4}-2x10{sup 4} J/cm{sup 3} for amorphization in the case of ions and U{sub th}{approx_equal}7x10{sup 4} J/cm{sup 3} for ablation in the case of laser pulses. The morphology of the heavily damaged regions (ion-induced tracks and laser-induced craters) generated above threshold and its evolution with the deposited energy are also comparatively discussed. The data show that damage in both types of experiments is cumulative and increases on successive irradiations. As a consequence, a certain incubation energy density has to be delivered either by the ions or laser photons in order to start observable damage under subthreshold conditions. The parallelism between the effects of laser pulses and ion impacts is well appreciated when they are described in terms of the ratio between the deposited energy density and the corresponding threshold value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Fe-doping on nonlinear optical responses and carrier trapping dynamics in GaN single crystals

We presented a quantitative study on the Fe-doping concentration dependence of optical nonlinearities and ultrafast carrier dynamics in Fe-doped GaN (GaN:Fe) single crystals using picosecond Z-scan and femtosecond pump-probe with phase object techniques under two-photon excitation. In contrast to the two-photon absorption that was found to be independent on the Fe-doping, the nonlinear refraction decreased with the Fe concentration due to the fast carrier trapping effect of Fe{sup 3+}/Fe{sup 2+} deep acceptors, which simultaneously acted as an efficient non-radiative recombination channels for excess carriers. Remarkably, compared to that of Si-doped GaN bulk crystal, the free-carrier refraction effect in GaN:Fe crystals was found to be enhanced considerably since Fe-doping and the effective carrier lifetime (∼10 ps) could be tuned over three orders of magnitude at high Fe-doping level of 1 × 10{sup 19 }cm{sup −3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exciton–Polaritons in CsPbBr 3 Crystals Revealed by Optical Reflectivity in High Magnetic Fields and Two-Photon Spectroscopy

Cesium lead bromide (CsPbBr3) is a representative material of the emerging class of lead halide perovskite semiconductors that possess remarkable optoelectronic properties. Its optical properties in the vicinity of the bandgap energy are greatly contributed by excitons, which form exciton polaritons due to strong light–matter interactions. Exciton–polaritons in solution-grown CsPbBr 3 crystals are examined by means of circularly polarized reflection spectroscopy measured in high magnetic fields up to 60 T. The excited 2P exciton state is measured by two-photon absorption. Comprehensive modeling and analysis provides detailed quantitative information about the exciton–polariton parameters: exciton binding energy of 32.5 meV, oscillator strength characterized by longitudinal–transverse splitting of 5.3 meV, damping of 6.7 meV, reduced exciton mass of 0.18$m$ 0 , exciton diamagnetic shift of 1.6 μeV T -2 , and exciton Landé factor $g$ x = + 2.35. It is shown that the exciton states can be described within a hydrogen-like model with an effective dielectric constant of 8.7. From the measured exciton longitudinal–transverse splitting, Kane energy of E p = 15 eV is evaluated, which is in reasonable agreement with values of 11.8–12.5 eV derived from the carrier effective masses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatiotemporal Reaction Dynamics Control in Two‐Photon Polymerization for Enhancing Writing Characteristics

Since 2001, 3D microfabrication based on two‐photon polymerization (TPP) has drawn extensive attention and interest in biology, optics, photonics, material science, and high‐energy physics. The in‐volume fabrication capability due to the threshold behavior of two‐photon absorption enables TPP higher flexibility compared with other nanofabrication techniques. However, as determined by the in‐volume fabrication feature as well as various reaction dynamics, the writing characteristics of TPP, such as throughput, accuracy, surface quality, and fabrication capability, are still limited. Herein, a comprehensive study is performed on the spatiotemporal behavior of reaction dynamics during TPP fabrication, mainly focusing on spatiotemporal characteristics of radical diffusion, photothermal effect, microscale mechanics, and voxel stacking process. Based on the study, a nonsequential fabrication method is established to simultaneously improve key writing characteristics of TPP and realize sharp features, high speeds, large overhang structure, and smooth surfaces. The method established in this work can be applied to improve the performance of functional devices for various fields.

36 MATERIALS SCIENCE↗

Au-Cu{sub 2}O core-shell nanowire photovoltaics

Semiconductor nanowires are among the most promising candidates for next generation photovoltaics. This is due to their outstanding optical and electrical properties which provide large optical cross sections while simultaneously decoupling the photon absorption and charge carrier extraction length scales. These effects relax the requirements for both the minority carrier diffusion length and the amount of semiconductor needed. Metal-semiconductor core-shell nanowires have previously been predicted to show even better optical absorption than solid semiconductor nanowires and offer the additional advantage of a local metal core contact. Here, we fabricate and analyze such a geometry using a single Au-Cu{sub 2}O core-shell nanowire photovoltaic cell as a model system. Spatially resolved photocurrent maps reveal that although the minority carrier diffusion length in the Cu{sub 2}O shell is less than 1 μm, the radial contact geometry with the incorporated metal electrode still allows for photogenerated carrier collection along an entire nanowire. Current-voltage measurements yield an open-circuit voltage of 600 mV under laser illumination and a dark diode turn-on voltage of 1 V. This study suggests the metal-semiconductor core-shell nanowire concept could be extended to low-cost, large-scale photovoltaic devices, utilizing for example, metal nanowire electrode grids coated with epitaxially grown semiconductor shells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on properties of ultrafast switching in a bulk gallium arsenide avalanche semiconductor switch

Properties of ultrafast switching in a bulk gallium arsenide (GaAs) avalanche semiconductor switch based on semi-insulating wafer, triggered by an optical pulse, were analyzed using physics-based numerical simulations. It has been demonstrated that when a voltage with amplitude of 5.2 kV is applied, after an exciting optical pulse with energy of 1 μJ arrival, the structure with thickness of 650 μm reaches a high conductivity state within 110 ps. Carriers are created due to photons absorption, and electrons and holes drift to anode and cathode terminals, respectively. Static ionizing domains appear both at anode and cathode terminals, and create impact-generated carriers which contribute to the formation of electron-hole plasma along entire channel. When the electric field in plasma region increases above the critical value (∼4 kV/cm) at which the electrons drift velocity peaks, a domain comes into being. An increase in carrier concentration due to avalanche multiplication in the domains reduces the domain width and results in the formation of an additional domain as soon as the field outside the domains increases above ∼4 kV/cm. The formation and evolution of multiple powerfully avalanching domains observed in the simulations are the physical reasons of ultrafast switching. The switch exhibits delayed breakdown with the characteristics affected by biased electric field, current density, and optical pulse energy. The dependence of threshold energy of the exciting optical pulse on the biased electric field is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tracing intermolecular Coulombic decay of carbon-dioxide dimers and oxygen dimers after valence photoionization

In this study, we have conducted an experimental study on the photo double ionization (PDI) of carbon-dioxide dimers at photon energies of 37 and 55 eV and oxygen dimers at photon energies of 38, 41.5, and 46 eV, while focusing on the dissociation dynamics upon single-photon absorption. The investigation was performed by applying the cold-target recoil-ion momentum spectroscopy method in order to collect and record the three-dimensional momenta of the ionic fragments and emitted electrons from the dissociating dimer in coincidence. The kinetic-energy release upon fragmentation and the electron angular distributions in the laboratory and body-fixed frames, as well as the relative electron-electron emission angle, show unambiguous experimental evidence of intermolecular Coulombic decay (ICD) in carbon-dioxide dimers upon photoionization below and above the double-ionization threshold of CO 2 monomers. The PDI of oxygen dimers is less conclusive and shows contributions from ICD and knock-off ionization mechanisms. As for atomic dimers, the present results reveal that ICD in CO 2 dimers after valence PDI can also serve as a source for low-energy electrons, known to be very relevant in biological systems, cells, and tissues.

74 ATOMIC AND MOLECULAR PHYSICS↗

Development of a Direct Neutral Density Diagnostic for Fusion Edge Plasmas

As magnetically confined plasmas progress towards ignition and long pulse experiments, measurement and control of the neutral density in the plasma edge has become a critical issue for stability, formation of transport barriers, and fueling. Recent experiments by our research group have demonstrated that is possible to use two-photon absorption laser induced fluorescence (TA-LIF) to directly measure the density of neutral hydrogen in helicon sources and in the HIT-SI3 spheromak. While those experiments validated key elements of a diagnostic system that would enable similar measurements in tokamak plasmas, they did not fully address the issue of performance optimization in the presence of intense background light at the fluorescence wavelength and they also identified a number of other issues that must be resolved before successful TALIF neutral density measurements in a tokamak are likely to be achieved. Additional specific concerns raised during design reviews with the leadership of the DIII-D tokamak facility included: the minimum detection threshold for this TALIF diagnostic (currently ~ 5 x 10 15 m -3 ) and the rate at which neutral density measurements could be obtained. Improving the system performance to reduce the minimum detection threshold and demonstrating a faster rate of density determination are required to advance this diagnostic to the level where it could be considered for implementation on a major tokamak facility in the USA. The key issues that will be addressed through additional technological development are: validation of a new, chromatic aberration-free, xenon calibration scheme; increasing the output power of the laser; and suppression of background emission at the fluorescence wavelength through optimization of the collection optics and gating of the photomultiplier detector with a goal of obtaining a minimum detection threshold of 5 x 10 14 m -3 . Another key technological development, so far only tested in helicon source experiments, is the validation of Doppler-free TALIF as a means of obtaining higher speed, calibrated, neutral density measurements in tokamak-like conditions at the full cadence of the pulsed TALIF laser. In this work, we propose to complete these technological advancements through installation and testing of our prototype TALIF system on the proto-MPEX experiment at Oak Ridge National Laboratory (ORNL). The proto-MPEX facility will provide plasma conditions similar to the edge plasma of a major tokamak experiment but with pulse lengths and pulse repetition rates ideally suited for extensive development of a TALIF neutral density diagnostic. Measurement of the absolute neutral density in the edge of a magnetically confined plasma is necessary for plasma density control; calculation of charge-exchange power losses; control of plasma-wall interactions; determination of the braking of plasma flow; determination of the fuel mixture in deuterium-tritium plasma; and understanding the dynamics of the divertor region in the plasma edge. In terms of potential impact on the worldwide fusion program, we note that in burning plasma experiments, such as ITER, a 100 mJ/pulse Doppler-free TALIF diagnostic should be capable of directly measuring the deuterium/tritium (D/T) isotope ratio in the outer 0.5 to 1.0 m of the plasma radius. The D/T ratio is a critically important parameter for the control and optimization of burning plasmas. Therefore, development of the diagnostic system proposed here is also relevant to long-term US participation in diagnostic development for large tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Laser Writing of Photoresponsive Colloids for Microscale Patterning of 3D Porous Structures

3D patterning of colloidal structures is enabled by the phototriggered aggregation of photoresponsive colloids. Here, we use direct laser writing to locally control aggregation behavior of photoresponsive colloids via a 2-photon absorption process. 3D structures composed of porous walls are harvested after rinsing away unexposed colloidal species. Aggregation is fully reversible with sufficient agitation.

36 MATERIALS SCIENCE↗

Transition Metal Dichalcogenides: Making Atomic‐Level Magnetism Tunable with Light at Room Temperature

Abstract The capacity to manipulate magnetization in 2D dilute magnetic semiconductors (2D‐DMSs) using light, specifically in magnetically doped transition metal dichalcogenide (TMD) monolayers ( M ‐doped TX 2 , where M = V, Fe, and Cr; T = W, Mo; X = S, Se, and Te), may lead to innovative applications in spintronics, spin‐caloritronics, valleytronics, and quantum computation. This Perspective paper explores the mediation of magnetization by light under ambient conditions in 2D‐TMD DMSs and heterostructures. By combining magneto‐LC resonance (MLCR) experiments with density functional theory (DFT) calculations, we show that the magnetization can be enhanced using light in V‐doped TMD monolayers (e.g., V‐WS 2 , V‐WSe 2 ). This phenomenon is attributed to excess holes in the conduction and valence bands, and carriers trapped in magnetic doping states, mediating the magnetization of the semiconducting layer. In 2D‐TMD heterostructures (VSe 2 /WS 2 , VSe 2 /MoS 2 ), the significance of proximity, charge‐transfer, and confinement effects in amplifying light‐mediated magnetism is demonstrated. We attributed this to photon absorption at the TMD layer that generates electron–hole pairs mediating the magnetization of the heterostructure. These findings will encourage further research in the field of 2D magnetism and establish a novel design of 2D‐TMDs and heterostructures with optically tunable magnetic functionalities, paving the way for next‐generation magneto‐optic nanodevices.

36 MATERIALS SCIENCE↗

Circumventing UV Light Induced Nanomorphology Disorder to Achieve Long Lifetime PTB7‐Th:PCBM Based Solar Cells

Abstract Large area flexible electronics rely on organic or hybrid materials prone to degradation limiting the device lifetime. For many years, photo‐oxidation has been thought to be one of the major degradation pathways. However, intense illumination may lead to a burn‐in or a rapid decrease in performance for devices completely isolated from corrosive elements as oxygen or moisture. The experimental studies which are presented in here indicate that a plausible triggering for the burn‐in is a spin flip after a UV photon absorption leading to the accumulation of electrostatic potential energy that initiates a rapid destruction of the nanomorpholgy in the fullerene phase of a polymer cell. To circumvent this and achieve highly stable and efficient devices, a robust nanocrystalline ordering is induced in the PCBM phase prior to UV illumination. In that event, PTB7‐Th:PC 71 BM cells are shown to exhibit T 80 lifetimes larger than 1.6 years under a continuous UV‐filtered 1‐sun illumination, equivalent to 7 years for sunlight harvesting at optimal orientation and 10 years for vertical applications.

Liu, Quan↗

Mechanical Design Guidelines to Inhibit Fracture in Perovskite Solar Cells

Perovskite (PVSK) solar cells offer significant benefits over conventional silicon cells including low-cost solution processibility, minimal materials usage related to strong photon absorption in thin-film cell architectures, and a tunable bandgap. However, PVSK films are mechanically fragile, and fracture of PVSK layers and adjacent interfaces are a significant concern during fabrication, encapsulation, and operation. Herein, a thin-film mechanics fracture analysis tailored for p–i–n and n–i–p PVSK solar cells on both soda lime glass and polyimide substrates fabricated with three PVSK crystallization methods is presented. Here, the role of thermal processing of each cell layer is explored to determine the maximum allowable temperature below which fracture is inhibited. In the analysis, the mechanics basis for processing and materials selection guidelines for preventing fracture in PVSK solar cells is provided.

adhesion↗

Fluorescence and Nonlinear Optical Properties of Alizarin Red S in Solvents and Droplet

The enhancement of the nonlinear properties of materials is an interesting topic since it has many applications in optical devices and medicines. The Z-scan technique was used to study the values of the two-photon absorption (β), second-order molecular hyperpolarizability (γ{sub R}), third-order susceptibility (χ{sub R}), and nonlinear refractive index (n{sub 2}) of Alizarin Red S in different media using a continuous-wave diode-pump laser radiation at 532 nm. For Alizarin Red S in a droplet, the β, n{sub 2}, χ{sub R,} and γ{sub R} were estimated at the order of 10{sup −7} cm{sup 2}/W and 10{sup −12} cm/W, 10{sup −3} m{sup 3} W{sup −1} s{sup −1} and 10{sup −24} m{sup 6} W{sup −1} s{sup −1}, respectively. The results indicated that the values of β and n{sub 2} reduced, whereas the values of χ{sub R} and γ{sub R} were enhanced when the solvent was changed from droplet to water, DMF, and dimethyl sulfoxide due to the change in the solvent’s dielectric constant (ε). Moreover, the values of β were enhanced by an increase in the concentration of the surfactant in the aqueous solution. The absorption spectra of Alizarin Red S in the aqueous solution was observed at 428 nm, and a few red shifts in the absorption spectra were observed with a reduction in the dielectric constant of the medium. The same effect was observed in the absorption spectra of Alizarin Red S in the droplet when the bulk dielectric constant reduced. The dielectric constant can affect the fluorescence spectra of Alizarin Red S when the solution is changed from water to dimethyl sulfoxide. The dipole moments of Alizarin Red S in the different media were studied using the quantum perturbation theory.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electronic and optical properties of ultra-thin 2D tungsten disulfide for photovoltaic applications

Atomically thin 2D layered semiconductor materials such as Transition Metal Di-Chalcogenides (TMDCs) have great potential for use as flexible, ultra-thin photovoltaic materials in solar cells due to their favorable photon absorption and electronic transport properties. The electronic properties, such as band structure and bandgap, and optical absorption properties of Tungsten Disulfide (WS 2 ) were obtained from Density Functional Theory (DFT) calculations; the properties of WS 2 make it a favorable photovoltaic material. Using these properties, we have modelled, using numerical calculations and simulations, a solar cell based on monolayer and bulk WS 2 together with amorphous silicon (a-Si). The maximum efficiency of this cell is 23.26% with V OC of 0.843 V and J SC of 33.49 mA/cm 2 . The performance of our solar cell is comparable to many commercial cells. The results show how monolayer WS 2 can serve as a suitable photovoltaic material, opening possibilities to develop solar cells based on 2D TMDC materials.

36 MATERIALS SCIENCE↗

Phase-Change Behavior and Nonlinear Optical Second and Third Harmonic Generation of the One-Dimensional K (1– x ) Cs x PSe 6 and Metastable β-CsPSe 6

The APSe(6) (A = K, K(1-x)Csx, Cs) family of one-dimensional (1D) materials was studied to examine the effects of the cation size on the nonlinear optical (NLO) response. The family has high-performing NLO properties with the noncentrosymmetric parent material, KPSe6, having infinite 1D chains of 1/(infinity)[PSe6-]. This structure has been successfully substituted with cesium up to K0.6Cs0.4PSe6 while retaining the polar character. All compounds crystallize in the space group Pca2(1) and have band gaps of 2.1 eV. In situ powder X-ray diffraction experiments using synchrotron radiation were used to determine the specifics of the amorphous to crystalline behavior and the crystallization and melting kinetics of the APSe(6) system. These measurements revealed a new phase, beta-CsPSe6, which is metastable and crystallizes in the noncentrosymmetric tetragonal space group P (4) over bar2(1)c with a = 12.526(2) angstrom, c = 12.781(3) angstrom, V = 2005.3(6) angstrom(3), and Z = 8. The structure is composed of 2 sets of mutually perpendicular 1/8[PSe6-] chains charge-balanced by Cs cations, and the band gap of beta-CsPSe6 is 1.9 eV. Second harmonic generation (SHG) measurements demonstrate that substitution of Cs into KPSe6 maintains the strong NLO signal with a very high SHG coefficient (chi((2))) of similar to 150 pm/V for K(1-x)CsxPSe6 and 30 pm/V for beta-CsPSe6. Laser-induced damage threshold analysis reveals APSe(6) exhibits two-photon absorption (2PA) at 1064 nm with input laser intensity greater than 1 GW/cm(2) and optical damage from 2PA at similar to 2 GW/cm(2). The materials also exhibit strong third harmonic generation (THG) with THG coefficients (chi((3)) x 10(5)) for KPSe6, K0.6Cs0.4PSe6, alpha-CsPSe6, and beta-CsPSe6 to be 2.6, 3.1, 1.8, and 1.1 pm(2)/V-2, respectively.

Haynes, Alyssa S.↗