Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “partitioned methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Comparison of measurement techniques and sorption of radium-226 in low and high salinity aqueous samples

Human activities have the potential to redistribute radium (Ra) in the marine environment in a manner that may necessitate monitoring or management of subsequent human or environmental exposures. There is therefore a need to identify accurate and accessible techniques for Ra measurement in high salinity samples and to describe the distribution of Ra in estuarine and marine environments, but most efforts in these areas have focused on low salinity matrices. In addition, rapid and reliable measurements are crucial for time-sensitive samples such as short-lived isotopes or emergency situations. The objective of this study is to describe the limits of detection, cost, and relative ease for measurement of Ra in both low and high salinity aqueous samples via three analytical methods: liquid scintillation counting (LSC), high purity germanium (HPGe) gamma spectrometry, and inductively coupled plasma mass spectrometry (ICP-MS). To contextualize these measurements for real-world scenarios, the partitioning of 226 Ra to substrates relevant to the marine environment was also characterized. Although HPGe detection with solid phase extraction had the lowest limit of detection for low salinity samples (0.27 Bq L −1 ), poor 226 Ra recovery for high salinity samples and high materials costs make this method prohibitive for many users. Limits of detection for high salinity samples were lower for LSC (1.28 Bq L −1 ) than for ICP-MS without dilution (11.4 Bq L −1 ), but significant and unexpected degradation of the high salinity LSC standards was observed after six months. Furthermore, our preferred measurement method for high salinity Ra samples is ICP-MS with sample dilution as necessary to reduce matrix effects.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS1988

A multiple-time-scale turbulence model based on variable partitioning of turbulent kinetic energy spectrum

The paper presents a multiple-time-scale turbulence model of a single point closure and a simplified split-spectrum method. Consideration is given to a class of turbulent boundary layer flows and of separated and/or swirling elliptic turbulent flows. For the separated and/or swirling turbulent flows, the present turbulence model yielded significantly improved computational results over those obtained with the standard k-epsilon turbulence model.

Kim, S.-W.↗
NASA NTRS1990

Parallelization of implicit finite difference schemes in computational fluid dynamics

Implicit finite difference schemes are often the preferred numerical schemes in computational fluid dynamics, requiring less stringent stability bounds than the explicit schemes. Each iteration in an implicit scheme involves global data dependencies in the form of second and higher order recurrences. Efficient parallel implementations of such iterative methods are considerably more difficult and non-intuitive. The parallelization of the implicit schemes that are used for solving the Euler and the thin layer Navier-Stokes equations and that require inversions of large linear systems in the form of block tri-diagonal and/or block penta-diagonal matrices is discussed. Three-dimensional cases are emphasized and schemes that minimize the total execution time are presented. Partitioning and scheduling schemes for alleviating the effects of the global data dependencies are described. An analysis of the communication and the computation aspects of these methods is presented. The effect of the boundary conditions on the parallel schemes is also discussed.

Decker, Naomi H.↗
DOE OSTI2022

Facile alignment estimation in carbon nanotube films using image processing

Whether a macroscopic assembly of carbon nanotubes can exhibit the one-dimensional properties expected from individual nanotubes critically depends on how well the nanotubes are aligned inside the assembly. Therefore, a simple and accurate method for assessing the degree of alignment is desired for the rapid characterization of carbon nanotube films and fibers. Here, we present an end-to-end solution for determining the global and local spatial orientation of carbon nanotubes in films within a short amount of time using a fast, precise, and economical approach based on an image processing method applied to scanning electron microscopy images. Further, we first use Laplacian edge enhancement filtering for improving the appearance of edge regions, which is followed by image partitioning into multiple blocks to capture the nanoscale orientation characteristics and total variation-based image decomposition of these image blocks. We then perform a 2D-fast Fourier transform on the image decomposed textural components of these edge-enhanced image blocks to determine the orientation distribution, which is utilized to estimate the 2D nematic order parameter. To show the effectiveness of our method, we corroborated our results against results obtained with other state-of-the-art image processing and experimental techniques.

2D-FFT↗
NASA NTRS1973

Extraction and classification of objects in multispectral images

Presented here is an algorithm that partitions a digitized multispectral image into parts that correspond to objects in the scene being sensed. The algorithm partitions an image into successively smaller rectangles and produces a partition that tends to minimize a criterion function. Supervised and unsupervised classification techniques can be applied to partitioned images. This partition-then-classify approach is used to process images sensed from aircraft and the ERTS-1 satellite, and the method is shown to give relatively accurate results in classifying agricultural areas and extracting urban areas.

Robertson, T. V.↗
NASA NTRS1995

Parallel CFD Algorithms for Aerodynamical Flow Solvers on Unstructured Meshes

The Advisory Group for Aerospace Research and Development (AGARD) has requested my participation in the lecture series entitled Parallel Computing in Computational Fluid Dynamics to be held at the von Karman Institute in Brussels, Belgium on May 15-19, 1995. In addition, a request has been made from the US Coordinator for AGARD at the Pentagon for NASA Ames to hold a repetition of the lecture series on October 16-20, 1995. I have been asked to be a local coordinator for the Ames event. All AGARD lecture series events have attendance limited to NATO allied countries. A brief of the lecture series is provided in the attached enclosure. Specifically, I have been asked to give two lectures of approximately 75 minutes each on the subject of parallel solution techniques for the fluid flow equations on unstructured meshes. The title of my lectures is "Parallel CFD Algorithms for Aerodynamical Flow Solvers on Unstructured Meshes" (Parts I-II). The contents of these lectures will be largely review in nature and will draw upon previously published work in this area. Topics of my lectures will include: (1) Mesh partitioning algorithms. Recursive techniques based on coordinate bisection, Cuthill-McKee level structures, and spectral bisection. (2) Newton's method for large scale CFD problems. Size and complexity estimates for Newton's method, modifications for insuring global convergence. (3) Techniques for constructing the Jacobian matrix. Analytic and numerical techniques for Jacobian matrix-vector products, constructing the transposed matrix, extensions to optimization and homotopy theories. (4) Iterative solution algorithms. Practical experience with GIVIRES and BICG-STAB matrix solvers. (5) Parallel matrix preconditioning. Incomplete Lower-Upper (ILU) factorization, domain-decomposed ILU, approximate Schur complement strategies.

Barth, Timothy J.↗
NASA NTRS2013

Methods and Systems for Authorizing an Effector Command in an Integrated Modular Environment

Methods and systems are provided for authorizing a command of an integrated modular environment in which a plurality of partitions control actions of a plurality of effectors is provided. A first identifier, a second identifier, and a third identifier are determined. The first identifier identifies a first partition of the plurality of partitions from which the command originated. The second identifier identifies a first effector of the plurality of effectors for which the command is intended. The third identifier identifies a second partition of the plurality of partitions that is responsible for controlling the first effector. The first identifier and the third identifier are compared to determine whether the first partition is the same as the second partition for authorization of the command.

Sunderland, Dean E.↗
DOE OSTI2021

Local indistinguishability and incompleteness of entangled orthogonal bases: Method to generate two-element locally indistinguishable ensembles

Highlights: • Local indistinguishability of orthogonal quantum states. • Bipartite and multipartite quantum ensembles. • Unextendible entangled bases and uncompletable entangled bases. • Two-element locally indistinguishable quantum ensembles. • Multiparty unextendible entangled bases with unextendibility in all partitions. We relate the phenomenon of local indistinguishability of orthogonal states with the properties of unextendibility and uncompletability of entangled bases for bipartite and multipartite quantum systems. We prove that all two-qubit unextendible entangled bases are of size three and they cannot be perfectly distinguished by separable measurements. We identify a method of constructing two-element orthogonal ensembles, based on the concept of unextendible entangled bases, that can potentially lead to information sharing applications. Two-element ensembles form the fundamental unit of ensembles, and yet does not offer locally indistinguishable ensembles for pure state elements. Going over to mixed states does open this possibility, but can be difficult to identify. The method provided using unextendible entangled bases can be used for their systematic generation. In multipartite systems, we find a class of unextendible entangled bases for which the unextendibility property remains conserved across all bipartitions. We also identify nonlocal operations, local implementation of which require entangled resource states from a higher-dimensional quantum system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

The disk partition function in string theory

We investigate the disk partition function for the open string. This is a subtle problem because of the presence of a residual gauge group PSL(2, R) on the worldsheet even after fixing the conformal gauge. It naively has infinite volume and leads to a vanishing answer. We use different methods that all demonstrate that PSL(2, R) effectively behaves like a group with finite negative volume in the path integral, which leads to a simple prescription for the computation of the disk partition function. We apply our findings to give a simple rederivation of the D-brane tensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1998

Algebraic Nonoverlapping Domain Decomposition Methods for Stabilized FEM and FV Discretizations

We consider preconditioning methods for convection dominated fluid flow problems based on a nonoverlapping Schur complement domain decomposition procedure for arbitrary triangulated domains. The triangulation is first partitioned into a number of subdomains and interfaces which induce a natural 2 x 2 partitioning of the p.d.e. discretization matrix. We view the Schur complement induced by this partitioning as an algebraically derived coarse space approximation. This avoids the known difficulties associated with the direct formation of an effective coarse discretization for advection dominated equations. By considering various approximations of the block factorization of the 2 x 2 system, we have developed a family of robust preconditioning techniques. A computer code based on these ideas has been developed and tested on the IBM SP2 using MPI message passing protocol. A number of 2-D CFD calculations will be presented for both scalar advection-diffusion equations and the Euler equations discretized using stabilized finite element and finite volume methods. These results show very good scalability of the preconditioner for various discretizations as the number of processors is increased while the number of degrees of freedom per processor is fixed.

Barth, Timothy J.↗
DOE OSTI2020

Surface reservoirs dominate dynamic gas-surface partitioning of many indoor air constituents

Human health is affected by indoor air quality. One distinctive aspect of the indoor environment is its very large surface area that acts as a poorly characterized sink and source of gas-phase chemicals. In this work, air-surface interactions of 19 common indoor air contaminants with diverse properties and sources were monitored in a house using fast-response, on-line mass spectrometric and spectroscopic methods. Enhanced-ventilation experiments demonstrate that most of the contaminants reside in the surface reservoirs and not, as expected, in the gas phase. They participate in rapid air-surface partitioning that is much faster than air exchange. Phase distribution calculations are consistent with the observations when assuming simultaneous equilibria between air and large weakly polar and polar absorptive surface reservoirs, with acid-base dissociation in the polar reservoir. Chemical exposure assessments must account for the finding that contaminants that are fully volatile under outdoor air conditions instead behave as semivolatile compounds indoors.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2021

Data Science Techniques, Assumptions, and Challenges in Alloy Clustering and Property Prediction

Data analytics methods have been increasingly applied to understanding materials chemistry, processing due to the manufacturing approach, and uni-axial and cyclic property relationships in the highly complex space of alloy design. There are several benefits to applying data analytics to this space, including the ability to manage non-linearities in the responses of the alloy attributes and the resulting mechanical properties. However, key difficulties in applying and understanding the results of data analytics include the often lack of reported assumptions and data processing steps necessary to improve interpretation and reproducibility in derived results. In this work, the methods used to generate clustering and correlation analyses for experimental 9% Cr ferritic-martensitic steel data were investigated and the resulting implications for mechanical property predictions were assessed. This work uses principal component analysis, partitioning around medoids, t-SNE, and k-means clustering to investigate trends in composition, processing and microstructure information with creep and tensile properties, building on work done previously using a smaller version of the same dataset. The initial assumptions, preprocessing steps and methods are investigated and outlined in order to depict the fine level of detail required to convey the steps taken to process data and produce analytical results. Here, the variations in the resulting analyses are explored due to the influence of new and more varied data.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Rapid Simulation of Unconventional Reservoirs by Multidomain Multiresolution Modeling Based on the Diffusive Time of Flight

Summary The fast marching method (FMM)-based rapid flow simulation has been shown to accelerate simulation efficiency by orders of magnitude by transforming 3D simulation to equivalent 1D simulation using the concept of the “diffusive time of flight” (DTOF). However, the 1D transformation does not directly apply to multiwell problems. In this paper, we propose a novel DTOF-based multidomain multiresolution discretization scheme to accelerate multiwell simulation of unconventional reservoirs. Our method formulates multiwell simulation problems based on the DTOF which displays the pressure front propagation in unconventional reservoirs. The DTOF contours are used to partition the reservoir into local and shared domains. A local domain is where the flow is dominated by a single well, and the shared domain is where the fluid flow is influenced by multiple wells. The DTOF contours expand independently in local domains and interfere in the shared domain. After the partitioning, each domain is discretized using a multiresolution scheme whereby the original 3D fine mesh is preserved near the wells to account for detailed physics including gravity, and the rest of the domain is discretized into 1D mesh based on the DTOF contours to alleviate the simulation workload. The power and efficacy of our approach are demonstrated using synthetic and field-scale simulation models with different degrees of geologic and well-completion complexity. The simulation results, number of active cells, and computation time for the proposed discretization scheme are compared with the original high-fidelity 3D model for each case. The results show that the proposed method is suitable for multiwell simulation problems in unconventional reservoirs and can accelerate flow simulations by orders of magnitude with minimal loss of accuracy. The novelty of this work is the creation of DTOF-derived multiresolution discretization with local and shared domains to simplify and accelerate the calculation of subsurface flow problems, especially in unconventional reservoirs. Our workflow can be easily interfaced with commercial simulators, making it suitable for large-scale field applications.

Engineering↗
DOE OSTI2021

Deforestation reshapes land-surface energy-flux partitioning

Land-use and land-cover change significantly modify local land-surface characteristics and water/energy exchanges, which can lead to atmospheric circulation and regional climate changes. In particular, deforestation accounts for a large portion of global land-use changes, which transforms forests into other land cover types, such as croplands and grazing lands. Many previous efforts have focused on observing and modeling land–atmosphere–water/energy fluxes to investigate land–atmosphere coupling induced by deforestation. However, interpreting land–atmosphere–water/energy-flux responses to deforestation is often complicated by the concurrent impacts from shifts in land-surface properties versus background atmospheric forcings. In this study, we used 29 paired FLUXNET sites, to improve understanding of how deforested land surfaces drive changes in surface-energy-flux partitioning. Each paired sites included an intact forested and non-forested site that had similar background climate. We employed transfer entropy, a method based on information theory, to diagnose directional controls between coupling variables, and identify nonlinear cause–effect relationships. Transfer entropy is a powerful tool to detective causal relationships in nonlinear and asynchronous systems. The paired eddy covariance flux measurements showed consistent and strong information flows from vegetation activity (gross primary productivity (GPP)) and physical climate (e.g. shortwave radiation, air temperature) to evaporative fraction (EF) over both non-forested and forested land surfaces. More importantly, the information transfers from radiation, precipitation, and GPP to EF were significantly reduced at non-forested sites, compared to forested sites. We then applied these observationally constrained metrics as benchmarks to evaluate the Energy Exascale Earth System Model (E3SM) land model (ELM). ELM predicted vegetation controls on EF relatively well, but underpredicted climate factors on EF, indicating model deficiencies in describing the relationships between atmospheric state and surface fluxes. Moreover, changes in controls on surface energy flux partitioning due to deforestation were not detected in the model. We highlight the need for benchmarking model simulated surface-energy fluxes and the corresponding causal relationships against those of observations, to improve our understanding of model predictability on how deforestation reshapes land surface energy fluxes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

On the computation of moments in the Super-Transition-Arrays model for radiative opacity calculations

In the Super-Transition-Array statistical method for the computation of radiative opacity of hot dense matter, the moments of the absorption or emission features involve partition functions with reduced degeneracies, occurring through the calculation of averages of products of subshell populations. Here, in the present work, we discuss several aspects of the computation of such peculiar partition functions, insisting on the precautions that must be taken in order to avoid numerical difficulties. In a previous work, we derived a formula for supershell partition functions, which takes the form of a functional of the distribution of energies within the supershell and allows for fast and accurate computations, truncating the number of terms in the expansion. The latter involves coefficients for which we obtained a recursion relation and an explicit formula. We show that such an expansion can be combined with the recurrence relation for shifted partition functions. We also propose, neglecting the effect of fine structure as a first step, a positive-definite formula for the Super-Transition-Array moments of any order, providing an insight into the asymmetry and sharpness of the latter. The corresponding formulas are free of alternating sums. Several ways to speed up the calculations are also presented.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Interface learning in fluid dynamics: Statistical inference of closures within micro–macro-coupling models

Many complex multiphysics systems in fluid dynamics involve using solvers with varied levels of approximations in different regions of the computational domain to resolve multiple spatiotemporal scales present in the flow. The accuracy of the solution is governed by how the information is exchanged between these solvers at the interface and several methods have been devised for such coupling problems. In this article, we construct a data-driven model by spatially coupling a microscale lattice Boltzmann method (LBM) solver and macroscale finite difference method (FDM) solver for reaction-diffusion systems. The coupling between the micro-macro solvers has one to many mapping at the interface leading to the interface closure problem, and we propose a statistical inference method based on neural networks to learn this closure relation. The performance of the proposed framework in a bifidelity setting partitioned between the FDM and LBM domain shows its promise for complex systems where analytical relations between micro-macro solvers are not available.

42 ENGINEERING↗
DOE OSTI2021

Illuminating the North Korean nuclear explosion test in 2017 using remote infrasound observations

North Korea conducted its sixth underground nuclear explosion test (mb 6.3) on 2017 September 3. The underground explosion produced substantial low-frequency atmospheric waves, which were detected by infrasound arrays located up to a distance of 566 km. These infrasound waves are formed by the conversion of seismic energy to acoustic energy across the lithosphere–atmosphere interface. While infrasound records at regional distances produce estimates of ground motion amplitude over spatially extended regions covering about 26 500 km 2 , 3-D full seismo-acoustic simulations within the lithosphere and atmosphere provide quantitative information about seismo-acoustic energy partitioning. Our results demonstrate the capability of remote infrasound observations combined with 3-D propagation modelling to further develop discrimination methods for underground sources. These results contribute to enhance the confidence of source identification and characterization in nuclear test monitoring research, which is essential for the enforcement of the Comprehensive Nuclear-Test-Ban Treaty.

58 GEOSCIENCES↗
DOE OSTI2025

Generalized symmetries of nonsupersymmetric orbifolds

We determine generalized symmetries for 4D theories engineered via type II strings on nonsupersymmetric orbifold backgrounds ℝ 3,1 × ℝ 6 /Γ. Probe branes detect generalized symmetries via the adjacency matrix for fermionic degrees of freedom in an associated quiver gauge theory. In situations where the tachyons are sequestered away from the boundary 𝑆 5 /Γ, this exactly matches the result extracted from singular homology. In situations with an unsequestered tachyon which stretches out to the boundary, the presence of tachyonic pulses partitions up the space into several distinct sectors, and the net contribution again matches with the answer expected via quiver methods. For IIA backgrounds, the presence of a localized closed string tachyon leads to transitions in the spectrum of states, generalized symmetries, higher-group symmetries, as well as the level matrix of the associated symmetry topological field theory (SymTFT). For IIB backgrounds with a stack of spacetime filling probe D3-branes, the onset of a radiatively generated potential leads to similar considerations involving scale dependent transitions in the symmetries of the theory, including structures such as duality defects/interfaces.

compactification↗