Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

A New "Cloud Mode" for the AERONET

A key to predicting climate change is to observe an understand the global distribution of clouds and their physical properties such as optical thickness and droplet size. Since clouds change rapidly over short time and space intervals, they are difficult to simulate in computer models. But it is essential that global climate models predict realistic spatial and temporal distribution of cloud optical depth. The best way to verify these distributions is to infer optical depth from global coverage satellite data. However, satellite methods have many sources of uncertainty; thus, independent and reliable ground-based estimates are essential for validation. For aerosol, there is the AERONET - a ground based monitoring network that consists of identical multi-channel radiometers for assessing aerosol optical properties and validating their satellite retrievals. In addition to AEROSOL, we want the network monitoring CLOUD optical properties. It will use AERONET "time" (inappropriate for aerosol studies) to make basic new measurements related to cloud physics. In the presentation we will report on a new technique that retrieves cloud optical thickness for even broken clouds above green vegetation from surface measurements of zenith radiance in the visible (VIS) and near-IR (NIR) spectral regions. The idea of the method is simple: since green vegetation reflects 40-50% of incoming radiation in the NIR and only 5-10% in the VIS region, ground measurements under thin clouds have little spectral contrast between VIS and NIR, while thick clouds reflect much more of the surface-reflected radiation in the NIR than in VIS. Based on this idea, we use a combination of measurements (spectral indices) in VIS and NIR to estimate cloud optical thickness. By analogy with NDVI, the simplest index that can be defined is the Normalized Difference Cloud Index (NDCI) which is a ratio between the difference and the sum of two radiances measured for two narrow spectral bands in VIS and NIR.

Marshak, Alexander↗
NASA NTRS1988

Optical investigation of Comet Halley

The physical properties of Comet P/Halley are being monitored from the ground using state of the art optical detectors. The long time base (1982-present) of the observations provides a unique record of the development of activity in a single comet. In addition, physical properties of other comets are measured to provide a reference against which Comet Halley may be compared. Results for the past year include: (1) publication of the first results on the surface brightness profiles of dust comets; (2) charge coupled device measurements of Comet Bowell show that the activity of comets can persist at least to heliocentric distances R = 13.6 AU; (3) a study of the back-scattering phase angle dependences of 5 comets (including Halley) shows evidence for small linear phase coefficients in each case; (4) temporal monitoring of P/Halley continues.

Jewitt, David↗
NASA NTRS1980

Absorption-line spectra of quasi-stellar objects - Physical properties of absorbing gas

The optical absorption lines of quasars are examined, and implications of the lines for the physical properties of the absorbing gas are discussed. Consideration is given to the characteristics of broad absorption lines observed in such quasars as PHL 5200 and Q 1246-057 and of the more prevalent extremely narrow lines, with discussion of the presumed physical conditions in the absorbing gas and the distribution of absorption-line redshifts with respect to emission-line redshifts. It is pointed out that absorption features become more prevalent in quasar spectra with emission redshifts greater than 2.3, and results of studies of column densities and abundances and of the presence of absorption in radio compact quasars are indicated. Research programs currently under way are then described, including a search for the distribution of absorption lines in a fixed wavelength range less than the Lyman alpha emission wavelength, study of low absorption-redshift systems, a study of individual objects such as the quasar pair 1548+114a and b, and various theoretical investigations.

Burbidge, E. M.↗
NASA NTRS1985

Growth of urea crystals by physical vapor transport

This work demonstrates that high optical quality crystals of urea can be grown by the physical vapor transport method. The unique features of this method are compared with growth from methanol/water solutions. High growth rates, exceeding 2.5 mm/day, were achieved, and cm-size optical quality single crystals were obtained. Details of the growth technique and the physical properties of the crystals are presented.

Feigelson, R. S.↗
NASA NTRS1998

Localization of Virtual Objects in the Near Visual Field (Operator Interaction with Simple Virtual Objects)

Errors in the localization of nearby virtual objects presented via see-through, helmet mounted displays are examined as a function of viewing conditions and scene content in four experiments using a total of 38 subjects. Monocular, biocular or stereoscopic presentation of the virtual objects, accommodation (required focus), subjects' age, and the position of physical surfaces are examined. Nearby physical surfaces are found to introduce localization errors that differ depending upon the other experimental factors. These errors apparently arise from the occlusion of the physical background by the optically superimposed virtual objects. But they are modified by subjects' accommodative competence and specific viewing conditions. The apparent physical size and transparency of the virtual objects and physical surfaces respectively are influenced by their relative position when superimposed. The design implications of the findings are discussed in a concluding section.

Ellis, Stephen R.↗
NASA NTRS1982

Simultaneous optical and X-ray bursts from 4U/MXB 1636-53

Methods of obtaining information about the geometry of X-ray burster systems from simultaneous optical and X-ray observations are discussed, and such simultaneous observations of 4U/MXB 1636-53 are reported. The physical idea of an optical burst being due to reprocessing of an X-ray burst in material in the vicinity of the compact object is discussed. The resulting modification of the X-ray burst signal is described in terms of an optical response function. Delay and smearing due to radiative processes are discussed along with those due to the geometry. For 4U/MXB 1636-53, the estimated delay is 2.5 seconds, the smearing is less than four seconds, and the maximum temperature of the reprocessing region is about 75,000 K. The projected area of the reprocessing region is about 6 x 10 to the 21st square cm. The neutron star is about 1.4 solar masses, the radius of the accretion disk is greater than 1.5 lt-sec, and the mass of the Roche lobe filling companion star is less than 2.0 solar masses, corresponding to a binary period between about one and ten hours.

Pedersen, H.↗
NASA NTRS1986

Physics through the 1990s: Scientific interfaces and technological applications

The volume examines the scientific interfaces and technological applications of physics. Twelve areas are dealt with: biological physics-biophysics, the brain, and theoretical biology; the physics-chemistry interface-instrumentation, surfaces, neutron and synchrotron radiation, polymers, organic electronic materials; materials science; geophysics-tectonics, the atmosphere and oceans, planets, drilling and seismic exploration, and remote sensing; computational physics-complex systems and applications in basic research; mathematics-field theory and chaos; microelectronics-integrated circuits, miniaturization, future trends; optical information technologies-fiber optics and photonics; instrumentation; physics applications to energy needs and the environment; national security-devices, weapons, and arms control; medical physics-radiology, ultrasonics, MNR, and photonics. An executive summary and many chapters contain recommendations regarding funding, education, industry participation, small-group university research and large facility programs, government agency programs, and computer database needs.

Source record↗
NASA NTRS2004

Clear, Conductive, Transparent, Flexible Space Durable Composite Films for Electrostatic Charge Mitigation

Space environmentally durable polymeric films with low color and sufficient electrical conductivity to mitigate electrostatic charge (ESC) build-up have been under investigation as part of a materials development activity. These materials have potential applications on advanced spacecraft, particularly on large, deployable, ultra-light weight Gossamer spacecraft. The approach taken to impart sufficient electrical conductivity into the polymer film while maintaining flexibility is to use single wall carbon nanotubes (SWNTs) as conductive additives. Approaches investigated in our lab involved an in-situ polymerization method, addition of SWNTs to a polymer containing reactive end-groups, and spray coating of polymer surfaces. The work described herein is a summary of the current status of this project. Surface conductivities (measured as surface resistance) in the range sufficient for ESC mitigation were achieved with minimal effects on the physical, thermal, mechanical and optical properties of the films. Additionally, the electrical conductivity was not affected by harsh mechanical manipulation of the films. The chemistry and physical properties of these nanocomposites will be discussed.

Watson, Kent A.↗
NASA NTRS1990

Polarization Aberrations

The analysis of the polarization characteristics displayed by optical systems can be divided into two categories: geometrical and physical. Geometrical analysis calculates the change in polarization of a wavefront between pupils in an optical instrument. Physical analysis propagates the polarized fields wherever the geometrical analysis is not valid, i.e., near the edges of stops, near images, in anisotropic media, etc. Polarization aberration theory provides a starting point for geometrical design and facilitates subsequent optimization. The polarization aberrations described arise from differences in the transmitted (or reflected) amplitudes and phases at interfaces. The polarization aberration matrix (PAM) is calculated for isotropic rotationally symmetric systems through fourth order and includes the interface phase, amplitude, linear diattenuation, and linear retardance aberrations. The exponential form of Jones matrices used are discussed. The PAM in Jones matrix is introduced. The exact calculation of polarization aberrations through polarization ray tracing is described. The report is divided into three sections: I. Rotationally Symmetric Optical Systems; II. Tilted and Decentered Optical Systems; and Polarization Analysis of LIDARs.

Mcguire, James P., Jr.↗
NASA NTRS2021

Optial Experiments and Model Validation of Perturbed Starshade Designs

Starshades are a leading technology to enable the direct detection and spectroscopic characterization of Earth- like exoplanets. Critical starshade technologies are currently being advanced through the S5 Project and at the Princeton starshade testbed. We report on the status of Milestone 2 of the S5 Project, optical model validation. We present results from optical experiments of starshades with intentional perturbations built into their design. These perturbations are representative of the type of perturbations possible in a flight design and serve as points of validation for dffraction models and error budgets. We show experimental results for two perturbed shapes, a mask with all petals shifted radially outward by 5 um and a mask with shallow sine waves built into two petals. We compare these data to outputs of the optical model and demonstrate better than 25% agreement. We also present images taken in crossed polarized light and use those data to constrain physical parameters of the optical edge. Bringing in previously obtained results for other perturbed shapes, we show an agreement between experiment and model of better than 25% and argue that this satisfies the Milestone 2 criteria.

Galvin, Michael↗
NASA NTRS2000

Fiber Optic Sensors for Health Monitoring of Morphing Airframes: Bragg Grating Strain and Temperature Sensor - Part 1

Fiber optic sensors are being developed for health monitoring of future aircraft. Aircraft health monitoring involves the use of strain, temperature, vibration and chemical sensors to infer integrity of the aircraft structure. Part 1 of this two part series describes sensors that will measure load and temperature signatures of these structures. In some cases a single fiber may be used for measuring these parameters. Part 2 will describe techniques for using optical fibers to monitor composite cure in real time during manufacture and to monitor in-service integrity of composite structures using a single fiber optic sensor capable of measuring multiple chemical and physical parameters. The facilities for fabricating optical fiber and associated sensors and the methods of demodulating Bragg gratings for strain measurement will be described.

Wood, Karen↗
NASA NTRS1998

Simultaneous in situ Optical Monitoring Techniques during Crystal Growth of ZnSe by Physical Vapor Transport

ZnSe crystals grown in sealed ampoules by the physical vapor transport method were monitored in situ using three techniques, simultaneously. A Michelson interferometer was set-up to observe the growth rate and surface morphological evolution. An interference pattern (interferogram) is formed by the interaction between the reflection of a HeNe laser (632.8 nm wavelength) off the crystal-vapor interface and a reference beam from the same laser. Preliminary results indicate that the rate of growth/thermal-etching can be calculated using analog data acquisition and simple fringe counting techniques. Gross surface features may also be observed using a digital frame grabber and fringe analysis software. The second in situ technique uses optical absorption to determine the partial pressures of the vapor species. The Se2 and Zn vapor species present in the sealed ampoule absorb light at characteristic wavelengths. The optical absorption is determined by monitoring the light intensity difference between the sample and reference beams. The Se2 Partial pressure profile along the length of the ampoule was estimated from the vibronic absorption peaks at 340.5, 350.8, 361.3 and 379.2 nm using the Beer's law constants established in the calibration runs of pure Se. Finally, because the high temperature crystal growth furnace contains windows, in situ visual observation of the growing crystal is also possible. The use of these techniques not only permits in situ investigation of high temperature vapor growth of semiconductors, but also offers the potential for real time feed back on the growing crystal and allows the possibility of actively controlling the growth process.

Su, C.- H.↗
NASA NTRS2005

How Special Are Dark Gamma-Ray Burst: A Diagnostic Tool

We present here a comprehensive study of the optical/near-infrared (IR) upper limits for gamma-ray bursts that have an X-ray afterglow. We have extrapolated the X-ray afterglows to optical wavelengths based on the physics of the fireball blast wave model and compared these results with optical upper limits for a large sample of bursts. We find a small set of only three bursts out of a sample of 20 for which the upper limits are not compatible with their X-ray afterglow properties within the context of any blast wave model. This sparse sample does not allow us to conclusively determine the cause of this optical/near-IR deficit. Extinction in the host galaxy is a likely cause, but high redshifts and different afterglow mechanisms might also explain the deficit in some cases. We note that the three bursts appear to have higher than average gamma-my peak fluxes. In a magnitude versus time diagram the bursts are separated from the majority of bursts with a detected optical/near-IR afterglow. However, two gamma- ray bursts with an optical afterglow (one of which is highly reddened) also fall in this region with dark bursts, making it likely that dark bursts are at the faint end of the set of optically detected bursts, and therefore the dark bursts likely form a continuum with the bursts with a detected optical afterglow. Our work provides a useful diagnostic tool for follow-up observations for potentially dark bursts; applied to the events detected with the Swift satellite, it will significantly increase our sample of truly dark bursts and shed light upon their nature. Subject headings: dust, extinction - gamma rays: bursts Online material: machine-readable tables

Rod, Evert↗
NASA NTRS1974

An interdisciplinary study of the estuarine and coastal oceanography of Block Island Sound and adjacent New York coastal waters

The author has identified the following significant results. Photo-optical additive color quantitative measurements were made of ERTS-1 reprocessed positives of New York Bight and Block Island Sound. Regression of these data on almost simultaneous ship sample data of water's physical, chemical, biological, and optical properties showed that ERTS bands 5 and 6 can be used to predict the absolute value of the total number of particles and bands 4 and 5 to predict the relative extinction coefficient in New York Bight. Water masses and mixing patterns in Block Island Sound heretofore considered transient were found to be persistent phenomena requiring revision of existing mathematical and hydraulic models.

Yost, E. F.↗
NASA NTRS1996

The Onset of the 1997-1998 El Nino and its Impact on the Phytoplankton Community of the Central Equatorial Pacific

Using physical and bio-optical data from moorings in the central equatorial Pacific, the perturbations to phytoplankton biomass and productivity associated with the onset of the 1997-98 El Nino event were investigated. The data presented depict the physical progression of El Nino onset, from reversal of the trade winds in the western equatorial Pacific, through eastward propagation of equatorially trapped Kelvin waves and advection of waters from the nutrient-poor western equatorial warm pool. The physical perturbations led to fluctuations in phytoplankton biomass, quantum yield of fluorescence and a 50% reduction in primary productivity.

Chavez, F. P.↗