Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observational methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Validation of Fault Displacements from Dynamic Rupture Simulations against the Observations from the 1992 Landers Earthquake

ABSTRACT Coseismic fault displacements in large earthquakes have caused significant damage to structures and lifelines on and near fault lines. Coseismic displacements represent a real threat, especially to distributed infrastructure systems. For infrastructure systems that can not avoid active faults, engineering displacement demands are defined using probabilistic fault-displacement hazard analyses (PFDHA). However, PFDHA models are sparse and poorly constrained partly due to the scarcity of detailed fault-displacement observations. Advancements in dynamic rupture simulation methods make them an attractive approach to address this important issue. Because fault displacements can be simulated for various geologic conditions as constrained by current knowledge about earthquake processes, they can be used to supplement the observation datasets. In addition to providing on-fault displacements, when used with appropriate constitutive models for the bulk medium, they can capture off-fault distributed inelastic deformations as well. For viable extrapolation, simulations must first be validated against data. In this article, we summarize the calibration and validation of the dynamic rupture model against the observations of the well-documented 1992 Landers earthquake. We defined a preferred model that reproduces several first-order fault-displacement metrics such as the on-fault partition of the total displacement, the mean fault-zone width, and the location of the peak displacement. Simulated ground motions consistent with the observations ensure that all physics important to modeling have been properly parameterized. For the extrapolation, we generated a suite of dynamic rupture models to quantify expected fault-displacement metrics, their intercorrelations, and magnitude dependencies, which are in part supported by the Landers and other recent earthquakes. Our validation and extrapolation exercise paves the way for using dynamic rupture modeling to quantitatively address fault-displacement hazard on a broader scale. The results are promising and are expected to be useful to inform PFDHA model development.

Geochemistry & Geophysics↗
DOE OSTI2025

The Ductility of 49Fe-49Co-2V Soft Magnetic Alloy Bar: Surface Effects and Test Methods

The tensile ductility of 49Fe-49Co-2V (Hiperco® 50A) bar was investigated in both as-received and heat-treated conditions. The as-received/machined specimens exhibit very low ductility compared to samples where heat treatment was the final step prior to testing. Microstructural characterization showed that internal residual strain from bar processing and, most importantly, surface machining damage, cause lower elongation in the as-received material. Because fracture of this intermetallic alloy initiates at the surface, it is particularly susceptible to surface machining damage, i.e., the near-surface region has already exhausted most of its ability to accumulate tensile strain. During heat treatment, the internal residual strain and near-surface machining damage are eliminated and ductility is improved, despite a higher degree of crystallographic ordering in the heat-treated condition (which typically lowers ductility). Furthermore, if machining is again performed after heat treatment, the material again exhibits brittle behavior, even with only light touch-up machining passes. Here, in this work, methods of tensile strain measurement were investigated, namely conventional knife-edge extensometry and noncontact digital image correlation (DIC) on heat-treated material. For clip-on knife-edge extensometry, the range of failure strain was 2.5-5.5% for heat-treated Hiperco. For noncontact methods, ductility up to 7% was observed. The results highlight the tendency for the alloy to fail at surface imperfections, even those produced by application of the extensometer itself. Noncontact laser extensometry is recommended for determining the intrinsic ductility of the alloy. A method of laser surface modification was developed which increased ductility by ~ 100% compared to unmodified samples. The high cooling rates achieved during laser surface processing can bypass the ordering reaction and produce a ductile disordered structure at the surface that exhibits ductile fracture characteristics.

EBSD↗
DOE OSTI2024

SDYN-GANs: Adversarial learning methods for multistep generative models for general order stochastic dynamics

We introduce adversarial learning methods for data-driven generative modeling of dynamics of nth-order stochastic systems. Our approach builds on Generative Adversarial Networks (GANs) with generative model classes based on stable m-step stochastic numerical integrators. From observations of trajectory samples, we introduce methods for learning long-time predictors and stable representations of the dynamics. Our approaches use discriminators based on Maximum Mean Discrepancy (MMD), training protocols using both conditional and marginal distributions, and methods for learning dynamic responses over different time-scales. We show how our approaches can be used for modeling physical systems to learn force-laws, damping coefficients, and noise-related parameters. Our adversarial learning approaches provide methods for obtaining stable generative models for dynamic tasks including long-time prediction and developing simulations for stochastic systems.

• Artificial intelligence (AI) / machine learning ↗
DOE OSTI2021

Data Assimilation Methods for Dynamical Systems [Slides]

Models are not perfect. Observations are not perfect. Data assimilation combines these sources of imperfect information to provide better information. The outline for this presentation is as follows: Introduction to Data Assimilation Variational Methods 3 Kalman Filter Methods Lorenz 96 EnKF Example Data Assimilation Examples

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Quantum Monte Carlo Methods for Astrophysical Applications

In recent years, new astrophysical observations have provided a wealth of exciting input for nuclear physics. For example, the observations of two-solar-mass neutron stars put strong constraints on possible phase transitions to exotic phases in strongly interacting matter at high densities. Furthermore, the recent observation of a neutron-star merger in both the electromagnetic spectrum and gravitational waves has provided compelling evidence that neutron-star mergers are an important site for the production of extremely neutron-rich nuclei within the r-process. In the coming years, an abundance of new observations is expected, which will continue to provide crucial constraints on the nuclear physics of these events. To reliably analyze such astrophysical observations and extract information on nuclear physics, it is very important that a consistent approach to nuclear systems is used. Such an approach consists of a precise and accurate method to solve the nuclear many-body problem in nuclei and nuclear matter, combined with modern nuclear Hamiltonians that allow to estimate the theoretical uncertainties. Quantum Monte Carlo methods are ideally suited for such an approach and have been successfully used to describe atomic nuclei and nuclear matter. In this contribution, I will present a detailed description of Quantum Monte Carlo methods focusing on the application of these methods to astrophysical problems. In particular, I will discuss how to use Quantum Monte Carlo methods to describe nuclear matter of relevance to the physics of neutron stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Data–Driven Velocity Model Evaluation Using K–Means Clustering

In this work, we develop a data-driven clustering method to evaluate a velocity model using surface wave velocity dispersion. This is done by first computing theoretical dispersion curves for 1-D velocity profiles of all the grid locations and then splitting the resulting dispersion curves into a certain number of groups via the K-means clustering. The observed dispersion curves are also clustered following the same procedure and the velocity model is assessed by comparing the spatial patterns obtained for the observed and synthetic data sets. The method is applied to evaluate two community velocity models in southern California, CVM-S4.26 and CVM-H15.1, using phase velocity maps derived for 3–16 s Rayleigh waves. We found a good correlation in the spatial distribution of clusters between the result of CVM-S4.26 and that of the observed data, suggesting that the CVM-S4.26 fits the observed dispersion maps better than the CVM-H15.1 in terms of features extracted from the clustering analysis.

58 GEOSCIENCES↗
DOE OSTI2020

A Digital Imaging Method for Evaluating the Kinetics of Vapochromic Response

This work describes the use of a cell phone camera and the L*a*b method (color space specified by the International Commission on Illumination) to characterize the color change in different vapochromic systems. In this study we have developed a semi-automatic color change analysis software that digitally analyzes images (e.g., video frames) collected while a vapochromic material is absorbing vapor. The advantages of using this method, as compared to reflectance spectroscopy or transmission spectroscopy through a thin film, include low cost, convenience, portability, ease of sample preparation, the absence of need for specialized equipment, and the ease of simultaneously collecting data on different samples under identical conditions. In addition, this method arguably provides direct insight into what a human would observe when monitoring these color changes by eye. Limitations of the method also are discussed in this paper.

cell phone camera, colorimetric sensing, vapor det↗
DOE OSTI2022

Inferring small-sample-reactivity worth from oscillation experiment with auto-corrected local flux

To estimate reactivity changes as a function of time from the signal of detectors count rates, one usually uses point kinetic equations. However, when detectors are located inside the core, it is often necessary to compute a correction factor to account for the flux-shape deformation (i.e. the change of detector efficiency that may have been induced by neutron absorbers movements). Various simulation methods have been developed depending on transients observed. They range from the resolution of static equations up to full-time-dependent neutron transport in 3D. However, those methods require high computational-cost calculations of local reaction rates that rely on nuclear data evaluations. Therefore, a 'measured' reactivity is never determined through pure measurements. Taking advantage of the known oscillation movement of a small sample at the center of the MINERVE reactor, the innovative algorithm presented in this paper derives the correction factor needed to get no time drift on reactivity steps. Derived correction factors are in good agreement with those obtained independently with TRIPOLI-4 through sensitivity analysis. Low sensitivity to the sample composition and moderate sensitivity to the detectors position reinforce the reliability of those results. This application paves the way to almost pure nuclear data reactivity measurements. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

A novel approach to increase accuracy in remotely sensed evapotranspiration through basin water balance and flux tower constraints

Remote sensing-derived evapotranspiration (RSET) products capture the spatiotemporal variations of evapotranspiration (ET) from field to basin scales with unprecedented details. However, their accuracy varies across RSET estimation methods and diverse hydroclimate regions. While ET modeling efforts to account for biophysical processes and controlling parameters have made good progress in recent years, a parallel approach of integrating in-situ ET with RSET could reduce biases in RSET products. Basin water balance ET (WBET) and flux tower ET are widely applied to evaluate RSET accuracy, yet such ET measurements are rarely used for RSET bias corrections, especially for large area applications. To address this issue, we propose a novel approach: the water balance equivalence (WABE) method, which generates spatially continuous WBET for correcting biases in RSET products. The WABE method computes synthetic WBET by integrating observed WBET and flux tower-derived FLUXCOM ET, which fills the spatial gaps of observed WBET and generates a spatially continuous WBET dataset. Synthetic WBET (2002–2015 annual average) of eight-digit hydrologic unit code (HUC8) basins across the conterminous United States (CONUS), constituting 44 % (887 out of 2035 basins) of CONUS basins, was determined within 2.0 % (RMSE = 12 %) of observed WBET at CONUS and between 1–12 % (RMSE = 3–33 %) across 18 regions in CONUS. With WABE-based bias corrections, the overall annual bias of RSET decreased from 10 % (RMSE = 34 %) to 6 % (RMSE = 26 %) across 37 flux tower sites. The WABE method offers a new approach for RSET accuracy improvement and shows great promise for large area implementations with a potential to yield substantial benefits for building accurate basin water budgets and water management decisions.

Khand, Kul↗
DOE OSTI2025

Two-step spin-coating of vacancy-ordered double perovskites enables growth of thin films for electronic devices

Vacancy-ordered double perovskites (VODPs), such as Cs 2 TeX 6 (X = Cl, Br, I), are lead-free alternatives to conventional metal-halide perovskites (MHPs). One limitation of VODPs is the lack of processes to form thin films relevant for physical characterization and electronic devices. A two-step spin-coating method was developed for synthesizing high-quality films of Cs 2 TeBr 6 . Independently depositing CsBr and TeBr 4 enables high precursor concentrations and control over crystallization kinetics. By optimizing the spin-coating parameters, conversion of precursors to phase pure films was observed using structural and surface characterization methods. The growth of mixed-halide systems was investigated using alternative salts including CsCl and CsI. The formation of halide alloys was found to depend on the existence of routes to byproducts. Lastly, single carrier diodes of Cs2TeBr6 were designed following valence band characterization with photoelectron spectroscopy. Temperature-dependent space-charge-limited current measurements revealed that transport occurs by hopping and the hole mobility is 3.2 × 10 −5 cm 2 V −1 s −1 near room temperature. As a result, the insights from the 2-step procedure provide a pathway towards making semiconducting devices from VODPs.

Kuklinski, Owen [University of California, Santa B↗
DOE OSTI2022

Data-Centric Approach to Capture Non-Polynomial Nonlinear Dynamics

We propose an analytical construction of observable functions in the extended dynamic mode decomposition (EDMD) algorithm. EDMD is a numerical method for approximating the spectral properties of the Koopman operator. The choice of observable functions is fundamental for applying EDMD to nonlinear problems arising in systems and control. Existing methods either start from a set of dictionary functions and look for the subset that best fits the underlying nonlinear dynamics or rely on machine learning algorithms to “learn” observable functions. Conversely, in this paper, we start from the dynamical system model and lift it through the Lie derivatives, rendering it into a polynomial form. This proposed transformation into a polynomial form is exact and provides an adequate set of observable functions. The strength of the proposed approach is its applicability to a broader class of nonlinear dynamical systems, particularly those with nonpolynomial functions and compositions thereof. Moreover, it retains the physical interpretability of the underlying dynamical system and can be readily integrated into existing numerical libraries. We demonstrate the proposed approach with an application to electric power systems. The modeled system consists of a single generator connected to an infinite bus, where nonlinear terms include sine and cosine functions. The results demonstrate the effectiveness of the proposed procedure in off-attractor nonlinear dynamics for estimation and prediction; the observable functions obtained from the proposed construction outperform methods that use dictionary functions comprising monomials or radial basis functions.

extended dynamic mode decomposition↗
DOE OSTI2023

Using Data-Driven Prediction of Downstream 1D River Flow to Overcome the Challenges of Hydrologic River Modeling

Methods for downstream river flow prediction can be categorized into physics-based and empirical approaches. Although based on well-studied physical relationships, physics-based models rely on numerous hydrologic variables characteristic of the specific river system that can be costly to acquire. Moreover, simulation is often computationally intensive. Conversely, empirical models require less information about the system being modeled and can capture a system’s interactions based on a smaller set of observed data. This article introduces two empirical methods to predict downstream hydraulic variables based on observed stream data: a linear programming (LP) model, and a convolutional neural network (CNN). We apply both empirical models within the Colorado River system to a site located on the Green River, downstream of the Yampa River confluence and Flaming Gorge Dam, and compare it to the physics-based model Streamflow Synthesis and Reservoir Regulation (SSARR) currently used by federal agencies. Results show that both proposed models significantly outperform the SSARR model. Moreover, the CNN model outperforms the LP model for hourly predictions whereas both perform similarly for daily predictions. Although less accurate than the CNN model at finer temporal resolution, the LP model is ideal for linear water scheduling tools.

13 HYDRO ENERGY↗
DOE OSTI2023

Exploiting stochastic locality in lattice QCD: hadronic observables and their uncertainties

Abstract Because of the mass gap, lattice QCD simulations exhibit stochastic locality: distant regions of the lattice fluctuate independently. There is a long history of exploiting this to increase statistics by obtaining multiple spatially-separated samples from each gauge field; in the extreme case, we arrive at the master-field approach in which a single gauge field is used. Here we develop techniques for studying hadronic observables using position-space correlators, which are more localized, and compare with the standard time-momentum representation. We also adapt methods for estimating the variance of an observable from autocorrelated Monte Carlo samples to the case of correlated spatially-separated samples.

Physics↗
DOE OSTI2021

Asynchronous quadratic control for constrained hidden markov jump linear systems with incomplete MTPM and MOCPM

Abstract This paper investigates the quadratic optimal control problem for constrained Markov jump linear systems with incomplete mode transition probability matrix (MTPM). Considering original system mode is not accessible, observed mode is utilized for asynchronous controller design where mode observation conditional probability matrix (MOCPM), which characterizes the emission between original modes and observed modes is assumed to be partially known. An LMI optimization problem is formulated for such constrained hidden Markov jump linear systems with incomplete MTPM and MOCPM. Based on this, a feasible state-feedback controller can be designed with the application of free-connection weighting matrix method. The desired controller, dependent on observed mode, is an asynchronous one which can minimize the upper bound of quadratic cost and satisfy restrictions on system states and control variables. Furthermore, clustering observation where observed modes recast into several clusters, is explored for simplifying the computational complexity. Numerical examples are provided to illustrate the validity.

Zhu, Jin↗
DOE OSTI2020

New method for fitting coefficients in standard model effective theory

We present an alternative method for carrying out a principal-component analysis of Wilson coefficients in standard model effective field theory (SMEFT). The method is based on singular-value decomposition (SVD). The SVD method provides information about the sensitivity of experimental observables to physics beyond the standard model that is not accessible in the Fisher-information method. In principle, the SVD method can also have computational advantages over diagonalization of the Fisher information matrix. We demonstrate the SVD method by applying it to the dimension-6 coefficients for the process of top-quark decay to a b quark and a W boson and use this example to illustrate some pitfalls in widely used fitting procedures. We also outline an iterative procedure for applying the SVD method to dimension-8 SMEFT coefficients.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

PyOED: An Extensible Suite for Data Assimilation and Model-Constrained Optimal Design of Experiments

This article describes PyOED, a highly extensible scientific package that enables developing and testing model-constrained optimal experimental design (OED) for inverse problems. Specifically, PyOED aims to be a comprehensive Python toolkit for model-constrained OED. The package targets scientists and researchers interested in understanding the details of OED formulations and approaches. It is also meant to enable researchers to experiment with standard and innovative OED technologies with a wide range of test problems (e.g., simulation models). OED, inverse problems (e.g., Bayesian inversion), and data assimilation (DA) are closely related research fields, and their formulations overlap significantly. Thus, PyOED is continuously being expanded with a plethora of Bayesian inversion, DA, and OED methods as well as new scientific simulation models, observation error models, and observation operators. These pieces are added such that they can be permuted to enable testing OED methods in various settings of varying complexities. The PyOED core is completely written in Python and utilizes the inherent object-oriented capabilities; however, the current version of PyOED is meant to be extensible rather than scalable. Specifically, PyOED is developed to “enable rapid development and benchmarking of OED methods with minimal coding effort and to maximize code reutilization.” This article provides a brief description of the PyOED layout and philosophy and provides a set of exemplary test cases and tutorials to demonstrate the potential of the package.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Recent streamflow trends across permafrost basins of North America: Datasets

Climate change impacts, including changing temperatures, precipitation, and vegetation, are widely anticipated to cause major shifts to the permafrost with resulting impacts to hydro-ecosystems across the high latitudes of the globe. However, it is challenging to examine streamflow shifts in these regions owing to a paucity of data, discontinuity of records, and other issues related to data consistency and accuracy. We looked at recent changes in streamflow over 1976-2021 in watersheds affected by varying degrees of permafrost coverage to characterize trends and drivers for a range of watersheds across North America. Data sets are described in detail in the paper associated with this data set, Bennett et al. 2023, Front. Water - Water and Critical Zone, DOI: 10.3389/frwa.2023.1099660.These data contain CSV files of the streamflow, climate, and land surface characteristics for several sites located across the high latitude regions of North America. Both observed and reanalysis data products are provided. These files can be opened using Excel or a text editor, or they can be read, and analyzed in software tools such as Python or R. A brief description of the files is below, and more details can be found in the Methods section.rabpro_stats_north_select_74_55m.csv - This file describes the observed gages used in the analysis.GF31_23_metadat.csv - This file describes the 23 permafrost systems. Columns are as described in rabpro_stats_north_select_74_55m.csv above, with rabpro_id, the id used for the timeseries file mapping in GF31_23_time_series.csv.GF31_23_time_series.csv - This file contains the time series data for the stations described in GF31_23_metadat.csv.GF31_random_reaches_1583.csv - This file describes the 1583 randomly selected permafrost-dominant sites for machine learning analysis.era5_GF31_monthly_vars_random_reaches_1583.csv - This file contains the monthly ERA5 land data for the 1583 randomly selected permafrost-dominant sites.observed.zip: USGS and Hydat station data for the 74 gages analyzed in this study. Monthly, seasonal, and annual streamflow observations for minimum streamflow, mean streamflow, and maximum streamflow. Units are m3/sec. 1975-2022.streamflow_daily_GF31_infilled_1979_2022.csv - infilled daily streamflow data (infilled using GloFAS v 3.1) for 55 gages. Units are m3/sec. 1979-2022.glofas_23.zip - Glofas v3.1 file for the 23 permafrost-dominant gages in the study. Monthly, seasonal, and annual streamflow observations for minimum streamflow, mean streamflow, and maximum streamflow. Units are m3/sec. 1979-2021.glofas_1583.zip - Glofas v3.1 file for the 1583 randomly selected permafrost-dominant gages in the study. Monthly, seasonal, and annual streamflow observations for minimum streamflow, mean streamflow, and maximum streamflow. Units are m3/sec. 1979-2021.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Physical, Chemical, and Mineralogical Characterizations of MSWI Ash Product and Recommendations for Downstream Processing

The primary objectives of this project are to (1) systematically characterize MSWI ash, and (2) based on characterization findings, design preliminary flowsheets for downstream processing. To achieve these objectives, a total of ten tasks were completed, including sample collection, physical separation tests, liberation tests, synthetic MSWI ash preparation, elemental composition analysis, sequential chemical extraction, mineralogical characterization, pozzolanic activity characterization, thermal stability characterization, processing flowsheet design, TEA and T2M, and project performance reporting. Many useful findings and conclusions were obtained from the exhaustive efforts of this project from several different aspects, including: a) Valuable Metals in MSWI Ash: MSWI ash contains a diverse array of valuable metals. Based on potential recoverable values, the most valuable metals present in MSWI ash include Fe, Ti, Mn, Cu, Zn, V, Co, Ni, Sr, Sn, Ag, Mo, and Sc. Some of these metals have been identified as critical minerals by DOE and DOI, suggesting that MSWI is a promising feedstock for critical mineral recovery. Noticeable graphical and seasonable variations in the valuable metal content of MSWI ash were observed. Nevertheless, it was challenging to discern any clear, definitive patterns for conclusions from those observations. Compared with bottom ash, fly ash contains more volatile metals, such as Zn and Sn, but less nonvolatile metals, such as Fe, Mn, Cu, Zn, Co, and Ni. Mineralogical analyses showed that MSWI ash contains a substantial amount of calcium minerals, such as portlandite, lime, gypsum, and calcite. In addition, it was found that different types of valuable metals often exist in the same particles. b) Physical Separation of MSWI Ash: Both dry sieving and wet sieving were performed on MSWI ash. A notable disparity in the size distribution of the same material was observed when using the two different sieving methods. The disparity is due to the agglomeration of small particles. For the valuable metals investigated, no significant enrichment in a specific size fraction was observed, suggesting that it is challenging to preconcentrate the valuable metals through size fractionation. Due to the presence of ferromagnetic materials, such as Fe, most of the materials reported to the magnetic products obtained by dry magnetic separation. However, the enrichment effect is minimal due to the existence of particle agglomerates. Density separation at a cut-off density of 2.7 SG or higher led to noticeable enrichment of selected valuable metals, particularly Ti. The unburned carbon present in MSWI ash was effectively removed by flotation using diesel as the collector. A novel reagent scheme, Na2S plus cationic collectors, that can efficiently beneficiate nonferrous metals plus Co was developed. c) Liberation Tests: The particle size of MSWI ash was effectively reduced by grinding, and as a result, the encapsulated valuable metal particles (if any) were liberated to a certain degree. However, particle size reductions did not noticeably enhance the beneficiation performance using the physical separation methods, primarily due to the inefficiency of these methods in processing fine particles and/or a possibility that insufficient liberation is not a limiting factor for achieving satisfactory physical separation performance. Valuable metals were classified into water leachable, ion-exchangeable, acid soluble, reducible, oxidable, and insoluble forms. It was found that the distributions in the different categories, i.e., the occurrence modes of the valuable metals, were not affected by the particle size. d) Leaching Characteristics of Metals from MSWI Ash: Most of the valuable metals were extracted from the fly ash samples when using 1 M HCl or HNO3 as the lixiviant. The leaching reaction is a very fast process, which can reach equilibrium within the first 5 min. The releasing of Co, Ni and Ag are sensitive to leaching temperature, a higher recovery value could be obtained when using relatively higher leaching temperatures. The leachability of the valuable metals present in MSWI bottom ash is relatively lower than that of fly ash. Leaching recoveries increased with elevations in the acid concentration. Relatively high leaching recoveries were obtained for REEs, Mn, Co, Ni, Cu, and Zn using 1 M HCl or HNO3 as the lixiviant. Elevations in the reaction temperature noticeably increased the leachability of the valuable metals, whereas the leachability was barely influenced by oxidizing and reducing agents. Similar to fly ash, leaching valuable metals from bottom ash is a rapid process, with most of the leaching reaction completed within the first 5 minutes. e) Combusted iPhones: The original structure of iPhones was remained after treating at 400 ºC and 600 ºC, while after being treated at 800℃, the screen bent, and the back cover of iPhone melted. Increasing the combustion temperature to 1000℃, the screen scattered, and most of the components turned into ashes. Combustion enhanced the leachability of REEs, while the leachability of the other valuable metals, except for Zn, was barely affected. Most of the REEs present in the original iPhones occurred as oxidizable forms. With elevations in the combustion temperature up to 600 ºC, the oxidizable REEs were transformed to acid soluble forms. However, further elevations in temperature resulted in decreases in the acid soluble fraction and corresponding increases in the reducible and oxidizable forms. Additionally, combustion temperature also significantly altered the occurrence modes of other metals present in the iPhones. f) Synthetic MSWI Ash: It was found that in the absence of hydrogen peroxide, all the elements except for Si were leached to certain degrees. It is noteworthy that approximately 80% of Zn was leached with 1.2 M HCl. When hydrogen peroxide was added to the reaction system, noticeable increases in the leaching recovery of Fe, Mn, Co, Ni, and Cu were observed. The leaching recovery of Al and Si was barely affected by adding hydrogen peroxide. These results suggested that the majority of Zn in the synthetic MSWI ash existed as metal oxide, a portion of Fe, Mn, Co, Ni, and Cu existed as metal oxide, and Al and Si are associated with glasses which are difficult to leach. Additionally, the remaining Fe, Mn, Co, Ni, and Cu in the metallic form were efficiently oxidized in the presence of hydrogen peroxide. g) Pozzolanic Activity and Thermal Stability of MSWI Ash: MSWI fly ash has higher pozzolanic activity compared to the bottom ash sample, which indicates that the fly ash sample consumed more portlandite because of its smaller particle size as reactivity fundamentally relates to reaction surface area. However, after the recovery of valuable elements, the pozzolanic activity of both the valuable elements fraction and the less valuable elements-rich products decreased significantly, which means that the valuable elements recovery lowers the Ca(OH)2 consumption, thus leading to the low activity of SCM. h) Flowsheet Design for Metal Recovery from MSWI Ash: Based on the results of the comprehensive physical separation and acid leaching tests, circuits that enable the beneficiation of the valuable metals were developed. In these circuits, the valuable metals are recovered into nonferrous, ferrous, and other valuable metal concentrates, which are processed separately in the acid leaching step. The subsequent separation and purification steps are simplified due to the physical beneficiation step. In addition, the overall recovery cost is reduced since physical beneficiation is much cheaper compared with chemical processing. Using different technologies, such as selective precipitation and solvent extraction, a comprehensive hydrometallurgical circuit was designed, and compounds of Cu, Zn, Mn, Co, and Ni with a purity close to or even higher than 95% were successfully generated.

36 MATERIALS SCIENCE↗