Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “metallic glasses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Microstructural and wear properties of sputtered carbides and silicides

Sputtered Cr3C2, Cr3Si2, and MoSi2 wear-resistant films (0.05 to 3.5 microns thick) were deposited on metal and glass surfaces. Electron transmission, electron diffraction, and scanning electron microscopy were used to determine the microstructural appearance. Strong adherence was obtained with these sputtered films. Internal stresses and defect crystallographic growth structures of various configurations within the film have progressively more undesirable effects for film thicknesses greater than 1.5 microns. Sliding contact and rolling-element bearing tests were also performed with these sputtered films.

Spalvins, T.↗

Seal problems of lithium cells

The problem of leakage through a seal in lithium cells is addressed. The use of ceramic and glass-to-metal seals is briefly discussed. Comments are presented from the Workshop participants.

Gross, S.↗

Space Resources and Space Settlements

This publication contains the technical papers from the five task groups that took part in the 1977 Ames Summer Study on Space Settlements and Industrialization Using Nonterrestrial Materials. The study was sponsored by the following NASA Headquarters organizations: Office of Space Science, Office of Aeronautics and Space Technology, and Office of Space Transportation Systems. The NASA Ames Research Center hosted the study and provided administrative support through its Life Sciences Directorate. Expert assistance in the many aspects of the study came from NASA Headquarters, NASA centers, universities, industry, and from individual consultants. This summer study was the largest and most comprehensive investigation of space manufacturing and habitation to date; forty senior research workers and ten students participated. The six-week study was preceded by several months of planning and preparation, and was followed by extensive work on manuscript checking, review, and assembly. The study topics reflected the research areas requiring the most intensive attention as ofrnid-1977; they were: Group I: Regenerative life-support systems and controlled environment agriculture. Group II: Parametric studies of efficient habitats in space. Time and cost analysis of a space manufacturing program plan. Group III: Detection and analysis of special classes of asteroids suitable as material resources for space manufacturing; studies of retrieval missions. Group IV: Electromagnetic mass drivers for use as interorbital engines, as devices to launch lunar material into space, and as tugs for the retrieval of asteroidal material. Group V: Chemical processing of non terrestrial material in space; manufacture of metals and glass fibers, beneficiation, and design of processing plants. These five task groups each produced two or more technical papers, signed by the contributing members. The papers were subjected to independent peer review by scientists not connected with the study. During the course of the study, frequent formal and informal exchanges of information occurred between task groups, so that the entire effort evolved in a coherent fashion and was directed toward common goals. However, each group remained responsible for the choice of its topics and for its conclusions. A listing of all the participants is given on pages vii-x. It would be inappropriate for me to single out particular people or groups for special mention, since all involved applied their skills with dedication and enthusiasm. Instead, I thank everyone for their contributions to the success of the study, and also for making it a united and warmly cooperative personal experience.

John Billingham↗

Transducer for extreme temperatures and pressures

Transducer with limits of 500 C and 10 kilobars responds to mechanical vibrations up to 20 kHz. Vibration pickup performs well in nuclear reactors, turbines, and other extreme environments. Low pressure problems of outgassing and "virtual" leakage experienced with conventional transducers potted in epoxy are eliminated with use of glass and metal supports. Interior opens to atmosphere, preventing buildup of pressure-induced stresses. Spring holds transducer against housing, reducing strain distortion.

Nadler, H.↗

Research on graphite reinforced glass matrix composites

High levels of mechanical performance in tension, flexure, fatigue, and creep loading situations of graphite fiber reinforced glass matrix composites are discussed. At test temperatures of up to 813 K it was found that the major limiting factor was the oxidative instability of the reinforcing graphite fibers. Particular points to note include the following: (1) a wide variety of graphite fibers were found to be comparable with the glass matrix composite fabrication process; (2) choice of fiber, to a large extent, controlled resultant composite performance; (3) composite fatigue performance was found to be excellent at both 300 K and 703 K; (4) composite creep and stress rupture at temperatures of up to 813 K was limited by the oxidative stability of the fiber; (5) exceptionally low values of composite thermal expansion coefficient were attributable to the dimensional stability of both matrix and fiber; and (6) component fabricability was demonstrated through the hot pressing of hot sections and brazing using glass and metal joining phases.

Prewo, K. M.↗

Ultraviolet-Induced Mirror Degradation

Recent tests of second-surface mirrors show that ultraviolet radiation penetrates glass and metalized zone and impinges upon backing paint. According to report, many backing materials are degraded by ultraviolet radiation. Mirror corrosion is a serious problem in solar-energy collection systems. Effects of UV on polymeric materials have been studied, and in general, all are degraded by UV. Polymers most resistant to UV radiation are polyimides.

Bouquet, F. L.↗

Insulators for Pb(1-x)Sn(x)Te

Thin films of LaF3 were e-gun and thermally deposited on several substrates. The e-gun deposited films are fluorine deficient, have high ionic conductivities that persist to 77 K, and high effective dielectric constants. The thermally deposited material tends to be closer to stoichiometric, and have higher effective breakdown field strengths. Thermally deposited LaF3 films with resistivities in excess of 10 to the 12th power ohms - cm were deposited on metal coated glass substrates. The LaF3 films were shown to adhere well to PbSnTe, surviving repeated cycles between room temperature and 77 K. The LaF3 films on GaAs were also studied.

Tsuo, Y. H.↗

Long life Li/SO2 cells

The development of a long life Li/SO2 battery (one that could operate continuously for periods of at least five years) is discussed. The causes of premature failures in battery concepts are defined and solutions to these problems are described. In particular the corrosion of the glass in a glass-to-metal seal and a spot welded positive lead are addressed.

Levy, S.↗

Method and apparatus for producing concentric hollow spheres

Hollow spheres with precisely concentric inner and outer spherical surfaces are formed by applying vibrations to a nonconcentric hollow sphere while it is at an elevated temperature at which it is fluid or plastic, the vibrations producing internal flows which cause the inner and outer surfaces to become precisely concentric. Concentric spheres can be mass produced by extruding a material such as glass or metal while injecting a stream of gas into the center of the extrusion to form a gas-filled tube. Vibrations are applied to the extruded tube to help break it up into individual bodies of a desired uniform size, the bodies tending to form spherical inner and outer surfaces by reason of surface tension, and the continuing application of vibrations causing these surfaces to become concentric.

Wang, T. G.↗

Hydrogenated amorphous silicon deposited by ion-beam sputtering

Hydrogenated amorphous silicon films 1/2 to 1 micron thick were deposited on metal and glass substrates using ion-beam sputtering techniques. The 800 eV, 2 mA/sq cm beam was a mixture of argon and hydrogen ions. The argon sputtered silicon from a pure (7.6 cm) single crystal wafer, while the hydrogen combined with the sputtered material during the deposition. Hydrogen to argon pressure ratios and substrate temperatures were varied to minimize the defect state density in the amorphous silicon. Characterization was done by electrical resistivity, index of refraction and optical absorption of the films.

Lowe, V. E.↗

Plastic-Sealed Hybrid Power Circuit Package

Proposed design for hybrid high-voltage power-circuit package uses molded plastic for hermetic sealing instead of glass-to-metal seal. New package used to house high-voltage regulators and solid-state switches for applications in aircraft, electric automobiles, industrial equipment, satellites, solarcell arrays, and other equipment in extreme environments.

Miller, W. N.↗

Proceedings of the Second International Colloquium on Drops and Bubbles

Applications of bubble and drop technologies are discussed and include: low gravity manufacturing, containerless melts, microballoon fabrication, ink printers, laser fusion targets, generation of organic glass and metal shells, and space processing. The fluid dynamics of bubbles and drops were examined. Thermomigration, capillary flow, and interfacial tension are discussed. Techniques for drop control are presented and include drop size control and drop shape control.

Lecroissette, D. H.↗

Inertial Confinement fusion targets

Inertial confinement fusion (ICF) targets are made as simple flat discs, as hollow shells or as complicated multilayer structures. Many techniques were devised for producing the targets. Glass and metal shells are made by using drop and bubble techniques. Solid hydrogen shells are also produced by adapting old methods to the solution of modern problems. Some of these techniques, problems, and solutions are discussed. In addition, the applications of many of the techniques to fabrication of ICF targets is presented.

Hendricks, C. D.↗

In Situ Composite Fastener

Fasteners installed prior to curing. In situ composite fastener polymeric, graphite, glass, or metallic thread, pin, or staple. Selected fastener pressed through thickness of composite component while composite is in prepreg or B-stage state. Parts not removed from mold to install fastener. Technique used around cutouts to prevent free edges from delaminating.

Freeman, W. T., Jr.↗

Containerless-Processing Module

High-temperature, containerless-processing module positions and melts molten glass or metal without contact with container wall. Fluid masses manipulated, stirred, and controlled by acoustic forces. Module provides photographic monitoring and transfer of solidified specimens to storage bins.

Wang, T. G.↗

Hermetic edge sealing of photovoltaic modules

The edge sealing technique is accomplished by a combination of a chemical bond between glass and aluminum, formed by electrostatic bonding, and a metallurgical bond between aluminum and aluminum, formed by ultrasonic welding. Such a glass to metal seal promises to provide a low cost, long lifetime, highly effective hermetic seal which can protect module components from severe environments. Development of the sealing techniques and demonstration of their effectiveness by fabricating a small number of dummy modules, up to eight inches square in size, and testing them for hermeticity using helium leak testing methods are reviewed. Non-destructive test methods are investigated.

Source record↗

Study of meteoroid impact craters on various materials (A0138-1)

Interplanetary dust particles (micrometeoroids) are expected to form well-defined craters upon impacting exposed material in space. Studying the frequency and features of these craters will provide data on the mass-flux distribution of micrometeoroids and, to a lesser extent, on the velocity magnitude and direction. This experiment will study impact craters produced by micrometeoroids on selected materials (metals and glasses in the form of thick targets) to obtain valuable technological and scientific data. Specifically, the studies will focus on determining micrometeoroid composition and mass-flux distribution. Analyses will also be made on the distribution of impact velocity vectors.

Mandeville, J. C.↗

Metal shell technology

Metallic shells are fabricated for a size range from several millimeters down to less than 500 microns in diameter. The technology, developed at JPL, is based on the hollow-jet instability for the large-shell formation, and in addition, on the Bernoulli's force for the microbubble generation. Various materials were processed into hollow spheres, such as AL1100, tin, lead, and a metallic glass-forming alloy, AuPbSb. They exhibited a range of contrasting solidification behaviors and surface characteristics. Some of their potential applications will be explored in this paper.

Lee, M. C.↗