SEARCH · Engineering Papers

Results for “map accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1982

The intercrater plains of Mercury and the Moon: Their nature, origin and role in terrestrial planet evolution. Areal measurement of Mercury's first quadrant

Various linear and areal measurements of Mercury's first quadrant which were used in geological map preparation, map analysis, and statistical surveys of crater densities are discussed. Accuracy of each method rests on the determination of the scale of the photograph, i.e., the conversion factor between distances on the planet (in km) and distances on the photograph (in cm). Measurement errors arise due to uncertainty in Mercury's radius, poor resolution, poor coverage, high Sun angle illumination in the limb regions, planetary curvature, limited precision in measuring instruments, and inaccuracies in the printed map scales. Estimates are given for these errors.

Leake, M. A.↗

NASA NTRS1984

Assessment of Computer-based Geologic Mapping of Rock Units in the LANDSAT-4 Scene of Northern Death Valley, California

Results from a series of geologic classifications conducted on a thematic mapper subscene of the northern Death Valley, California are reported. Measurements of accuracy are made through comparison with the 1977 edition of the Death Valley geologic sheet. This employs a simplified map version which is registered by computer to the image data base, allowing a pixel by pixel match with the classified scene. The results show accuracy ranges from 36 to 79% depending on the type of classifier used and the statistical adjustments made to the data. Accuracy values in identifying geologic units were 2 to 3 times higher for those in the relatively flat valleys than for units in the rugged mountainous terrain. Improvements in accuracy will be sought by correcting for slope/aspect variations in mountainous terrain using topographic data recorded in Defense Mapping Agency (DMA) tapes. The above classification results will also be compared with ratio and principal component image classifications made from the same scene.

Short, N. M.↗

NASA NTRS1976

Mapping islands, reefs and shoals in the oceans surrounding Australia

The author has identified the following significant results. The geometric accuracy test produced an estimate that the distortion levels on LANDSAT imagery are such that few corrections, or possibly no corrections, would be necessary in order to have the imagery satisfy accuracy specifications. It can be expected that the geometric accuracy of the low generation imagery, being used in distortion tests, in such that the distortions would cause no difficulty during the course of map preparation.

Turner, L. G.↗

NASA NTRS1974

Agriculture, forestry, range resources

In the area of crop specie identification, it has been found that temporal data analysis, preliminary stratification, and unequal probability analysis were several of the factors that contributed to high identification accuracies. Single data set accuracies on fields of greater than 80,000 sq m (20 acres) are in the 70- to 90-percent range; however, with the use of temporal data, accuracies of 95 percent have been reported. Identification accuracy drops off significantly on areas of less than 80,000 sq m (20 acres) as does measurement accuracy. Forest stratification into coniferous and deciduous areas has been accomplished to a 90- to 95-percent accuracy level. Using multistage sampling techniques, the timber volume of a national forest district has been estimated to a confidence level and standard deviation acceptable to the Forest Service at a very favorable cost-benefit time ratio. Range specie/plant community vegetation mapping has been accomplished at various levels of success (69- to 90-percent accuracy). However, several investigators have obtained encouraging initial results in range biomass (forage production) estimation and range readiness predictions. Soil association map correction and soil association mapping in new area appear to have been proven feasible on large areas; however, testing in a complex soil area should be undertaken.

Crea, W. J.↗

NASA NTRS1983

Conclusions and recommendations

From the analyses performed thus far, it is clear that the ship data must be treated with great care in any satellite comparisons because of their high noise level. At the very least, the ship data should be screened to eliminate observations deviating unreasonably from climatology. In fact, a two pass screening is better, with the second pass screening out data deviating unreasonably from the first pass mapping attempt. Even with screening, the noise level is comparable with that of the satellite data and, particularly in spot comparisons, should not be used to evaluate the accuracy of the satellite data. Consideration also should be given to more sophisticated mapping procedures than simple binning averaging. Procedures that attempt local least squares fitting to individual observations would give better results because they would then be less sensitive to the spatial distribution of the data.

Source record↗

NASA NTRS1973

Forest and range mapping in the Houston area with ERTS-1

ERTS-1 data acquired over the Houston area has been analyzed for applications to forest and range mapping. In the field of forestry the Sam Houston National Forest (Texas) was chosen as a test site, (Scene ID 1037-16244). Conventional imagery interpretation as well as computer processing methods were used to make classification maps of timber species, condition and land-use. The results were compared with timber stand maps which were obtained from aircraft imagery and checked in the field. The preliminary investigations show that conventional interpretation techniques indicated an accuracy in classification of 63 percent. The computer-aided interpretations made by a clustering technique gave 70 percent accuracy. Computer-aided and conventional multispectral analysis techniques were applied to range vegetation type mapping in the gulf coast marsh. Two species of salt marsh grasses were mapped.

Heath, G. R.↗

NASA NTRS1977

The use of the LANDSAT data collection system and imagery in reservoir management and operation

The author has identified the following significant results. An increase in the data collection system's (DCS) ability to function in the flood control mission with no additional manpower was demonstrated during the storms which struck New England during April and May of 1975 and August 1976. It was found that for this watershed, creditable flood hydrographs could be generated from DCS data. It was concluded that an ideal DCS for reservoir regulation would draw features from LANDSAT and GOES. MSS grayscale computer printout and a USGS topographic map were compared, yielding an optimum computer classification map of the wetland areas of the Merrimack River estuary. A classification accuracy of 75% was obtained for the wetlands unit, taking into account the misclassified and the unclassified pixels. The MSS band 7 grayscale printouts of the Franklin Falls reservoir showed good agreement to USGS topographic maps in total area of water depicted at the low water reservoir stage and at the maximum inundation level. Preliminary analysis of the LANDSAT digital data using the GISS computer algorithms showed that the radiance of snow cover/vegetation varied from approximately 20 mW/sq cm sr in nonvegetated areas to less than 4 mW/sq cm sr for densely covered forested area.

Cooper, S.↗

NASA NTRS1977

Development and application of operational techniques for the inventory and monitoring of resources and uses for the Texas coastal zone

The author has identified the following significant results. Four LANDSAT scenes were analyzed for the Harbor Island area test sites to produce land cover and land use maps using both image interpretation and computer-assisted techniques. When evaluated against aerial photography, the mean accuracy for three scenes was 84% for the image interpretation product and 62% for the computer-assisted classification maps. Analysis of the fourth scene was not completed using the image interpretation technique, because of poor quality, false color composite, but was available from the computer technique. Preliminary results indicate that these LANDSAT products can be applied to a variety of planning and management activities in the Texas coastal zone.

Harwood, P.↗

DOE OSTI2026

Learning Latent Representations to Bridge Coarse-Grained and Atomistic Resolutions in Polymer Simulations

We present a machine-learning-based framework for learning reduced-order representations of polymer chain conformations across coarse-grained (CG) and united-atom (UA) fidelities. By employing linear singular value decomposition and nonlinear autoencoders, we compress high-dimensional polymer configurations into latent spaces with minimal loss of structural accuracy. Crucially, we demonstrate a near-perfect linear mapping between CG and UA latent spaces, enabling an efficient super-resolution back-mapping procedure that reconstructs high-fidelity UA configurations from CG simulations. While minor structural inaccuracies occur, they are effectively corrected through a brief molecular dynamics relaxation, forming a practical hybrid machine learning−physics scheme. This approach establishes the key structural prerequisites for accelerated polymer dynamics simulations: a compact and accurate latent encoding of polymer chain conformations and a validated multi-fidelity mapping that permits reconstruction of UA structures from CG configurations. The extension of this framework to explicit time evolution within the latent space, enabling dynamics to be propagated at CG fidelity and decoded to UA resolution only when required, represents a natural and well-motivated direction for future work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Three‐Dimensional Broadband Interferometric Mapping and Polarization (BIMAP‐3D) Observations of Lightning Discharge Processes

Abstract Following on our earlier single‐station, 2‐dimensional (2D) broadband interferometric mapping and polarization (BIMAP) observations of lightning discharges, we recently deployed two BIMAP stations at Los Alamos National Laboratory to map the lightning sources and their polarization in full 3‐dimensional (3D) space (BIMAP‐3D). The two stations are separated by 11.5‐km and each station consists of four antenna sets (instead of three for the original BIMAP) that form a Y ‐shaped array for improved interferometric performance. In this paper, we report the BIMAP‐3D system design, a generalized and analytical 2D interferometry technique for noncoplanar antenna array, a two‐stage 3D mapping technique based on geometric triangulation and baseline‐based differential time of arrival, and a technique to reconstruct the polarization orientation in 3D space by combining the 2D polarization results from the two‐station observations. Along with description of the techniques, we demonstrate and discuss the initial lightning results, including 3D maps for a hybrid intracloud and cloud‐to‐ground flash and for a normal intracloud flash, development of abnormal K‐change leaders, and polarization signatures for a K‐change leader. We find that with the two‐stage 3D mapping techniques, the sources can be located to meters accuracy for a favorable event that occurs between the two stations. We also find the polarization vectors for the example K leader are mostly orthogonal to the leader channel after the full 3D polarization analysis. The main purpose of this paper is to report the BIMAP‐3D techniques and capabilities. Detailed analysis of more specific discharge processes will be reported in later studies.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Improving the creation of SiV centers in diamond via sub-μs pulsed annealing treatment

Silicon-vacancy (SiV) centers in diamond are emerging as promising quantum emitters in applications such as quantum communication and quantum information processing. Here, we demonstrate a sub-μs pulsed annealing treatment that dramatically increases the photoluminescence of SiV centers in diamond. Using a silane-functionalized adamantane precursor and a laser- heated diamond anvil cell, the temperature and energy conditions required to form SiV centers in diamond were mapped out via an optical thermometry system with an accuracy of ±50 K and a 1 μs temporal resolution. Annealing scheme studies reveal that pulsed annealing can obviously minimize the migration of SiV centers out of the diamond lattice, and a 2.5-fold increase in the number of emitting centers was achieved using a series of 200-ns pulses at a 50 kHz repetition rate via acousto-optic modulation. Our study provides a novel pulsed annealing treatment approach to improve the efficiency of the creation of SiV centers in diamond.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Towards Automatic Mapping of Vulnerabilities to Attack Patterns using Large Language Models

With the advent of new devices and applications, cyber attack surface is continuously evolving due to the emergence of new attack techniques and vulnerabilities. Hence, security management tool must assess the cyber risk of an enterprise at regular interval basis through comprehensively identifying associations among attack techniques, weakness, and vulnerabilities. However, existing repositories providing such associations are incomplete (i.e., missing associations), inducing the likelihood of undermining the risk of particular set of attack techniques. Moreover, such associations still rely on manual interpretation, which is slow compared to attack speed and ineffective for the increasing list of vulnerabilities and attack actions. Therefore, there is an urge to develop methodologies for automatically associating vulnerabilities to all relevant attack techniques. In this paper, we present a framework, named VWC-MAP, that can automatically identify all relevant attack techniques of a vulnerability via weakness based on their text descriptions, applying natural language process (NLP) techniques. To achieve that, we present a novel two-tiered classification approach, where the first tier classifies vulnerabilities to weakness, and the second tier classifies weakness to attack techniques. This research has improved the scalability of the current state-of-the-art tool to make vulnerability to weakness mapping significantly faster. Moreover, this paper presents two novel approaches for weakness to attack technique mapping applying Text-to-Text and link prediction techniques. Our experiment results cross-validated through cyber-security experts show that VWC-MAP can associate vulnerabilities to weakness types with 87% accuracy and to new attack patterns with 80% accuracy.

Das, Siddhartha Shankar↗

NASA NTRS1969

Surface temperature mapping with infrared photographic pyrometry

Infrared photographic pyrometry method measures and maps the temperature distribution on a heated surface with accuracy and precision. This method involves the collection, detection and measurement of a narrow bandwidth of emitted infrared radiation. Standard commercially-available equipment is used, together with systematic procedures.

Pollack, F. G.↗

NASA NTRS1972

Optimum usage of ground stations for GEOS-C orbit determination

Effective utilization of data from the GEOS-C satellite for geoidal mapping was explored. Particular attention was given to the accuracy of orbits calculated from one revolution. Results show one revolution solutions are less affected by geopotential coefficient error than multi-revolution solutions. Data were taken from two global network tracking stations.

Martin, C. F.↗

NASA NTRS1973

ERTS-1 data user investigation of wetlands ecology

The author has identified the following significant results. ERTS-1 imagery (enlarged to 1:250,000) is an excellent tool by which large area coastal marshland mapping may be undertaken. If states can sacrifice some accuracy (amount unknown at this time) in placing of boundary lines, the technique may be used to do the following: (1) estimate extent of man's impact on marshes by ditching and lagooning and accelerated successional trends; (2) place boundaries between wetland and upland and hence estimate amount of coastal marshland remaining in the state; (3) distinguish among relatively large zones of various plant species including high and low growth S. alterniflora, J. roemerianus, and S. cynosuroides; and (4) estimate marsh plant species productivity when ground based information is available.

Anderson, R. R.↗

NASA NTRS1977

Alteration mapping at Goldfield, Nevada, by cluster and discriminant analysis of LANDSAT digital data

The ability of Landsat multispectral digital data to differentiate among 62 combinations of rock and alteration types at the Goldfield mining district of Western Nevada was investigated by using statistical techniques of cluster and discriminant analysis. Multivariate discriminant analysis was not effective in classifying each of the 62 groups, with classification results essentially the same whether data of four channels alone or combined with six ratios of channels were used. Bivariate plots of group means revealed a cluster of three groups including mill tailings, basalt and all other rock and alteration types. Automatic hierarchical clustering based on the fourth dimensional Mahalanobis distance between group means of 30 groups having five or more samples was performed. The results of the cluster analysis revealed hierarchies of mill tailings vs. natural materials, basalt vs. non-basalt, highly reflectant rocks vs. other rocks and exclusively unaltered rocks vs. predominantly altered rocks. The hierarchies were used to determine the order in which sets of multiple discriminant analyses were to be performed and the resulting discriminant functions were used to produce a map of geology and alteration which has an overall accuracy of 70 percent for discriminating exclusively altered rocks from predominantly altered rocks.

Ballew, G.↗

NASA NTRS1977

Alteration mapping at Goldfield, Nevada, by cluster and discriminant analysis of Landsat digital data

The ability of Landsat multispectral digital data to differentiate among 62 combinations of rock and alteration types at the Goldfield mining district of Western Nevada was investigated by using statistical techniques of cluster and discriminant analysis. Multivariate discriminant analysis was not effective in classifying each of the 62 groups, with classification results essentially the same whether data of four channels alone or combined with six ratios of channels were used. Bivariate plots of group means revealed a cluster of three groups including mill tailings, basalt and all other rock and alteration types. Automatic hierarchical clustering based on the fourth dimensional Mahalanobis distance between group means of 30 groups having five or more samples was performed using Johnson's HICLUS program. The results of the cluster analysis revealed hierarchies of mill tailings vs. natural materials, basalt vs. non-basalt, highly reflectant rocks vs. other rocks and exclusively unaltered rocks vs. predominantly altered rocks. The hierarchies were used to determine the order in which sets of multiple discriminant analyses were to be performed and the resulting discriminant functions were used to produce a map of geology and alteration which has an overall accuracy of 70 percent for discriminating exclusively altered rocks from predominantly altered rocks.

Ballew, G.↗

NASA NTRS1979

Demonstration of wetland vegetation mapping in Florida from computer-processed satellite and aircraft multispectral scanner data

The success of remotely mapping wetland vegetation of the southwestern coast of Florida is examined. A computerized technique to process aircraft and LANDSAT multispectral scanner data into vegetation classification maps was used. The cost effectiveness of this mapping technique was evaluated in terms of user requirements, accuracy, and cost. Results indicate that mangrove communities are classified most cost effectively by the LANDSAT technique, with an accuracy of approximately 87 percent and with a cost of approximately 3 cent per hectare compared to $46.50 per hectare for conventional ground survey methods.

Butera, M. K.↗