Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lack”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Interfacial Atomistic Mechanisms of Lithium Metal Stripping and Plating in Solid–State Batteries

All-solid-state batteries based on a Li metal anode represent a promising next-generation energy storage system, but are currently limited by low current density and short cycle life. Further research to improve the Li metal anode is impeded by the lack of understanding in its failure mechanisms at lithium–solid interfaces, in particular, the fundamental atomistic processes responsible for interface failure. Here, using large-scale molecular dynamics simulations, the first atomistic modeling study of lithium stripping and plating on a solid electrolyte is performed by explicitly considering key fundamental atomistic processes and interface atomistic structures. In the simulations, the interface failure initiated with the formation of nano-sized pores, and how interface structures, lithium diffusion, adhesion energy, and applied pressure affect interface failure during Li cycling are observed. By systematically varying the parameters of solid-state lithium cells in the simulations, the parameter space of applied pressures and interfacial adhesion energies that inhibit interface failure during cycling are mapped to guide selection of solid-state cells. Furthermore, this study establishes the atomistic modeling for Li stripping and plating, and predicts optimal solid interfaces and new strategies for the future research and development of solid-state Li-metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Exploring the Pb 1− x Sr x HfO 3 System and Potential for High Capacitive Energy Storage Density and Efficiency

Abstract The hafnate perovskites PbHfO 3 (antiferroelectric) and SrHfO 3 (“potential” ferroelectric) are studied as epitaxial thin films on SrTiO 3 (001) substrates with the added opportunity of observing a morphotropic phase boundary (MPB) in the Pb 1− x Sr x HfO 3 system. The resulting (240)‐oriented PbHfO 3 ( Pba 2) films exhibited antiferroelectric switching with a saturation polarization ≈53 µC cm −2 at 1.6 MV cm −1 , weak‐field dielectric constant ≈186 at 298 K, and an antiferroelectric‐to‐paraelectric phase transition at ≈518 K. (002)‐oriented SrHfO 3 films exhibited neither ferroelectric behavior nor evidence of a polar P 4 mm phase . Instead, the SrHfO 3 films exhibited a weak‐field dielectric constant ≈25 at 298 K and no signs of a structural transition to a polar phase as a function of temperature (77–623 K) and electric field (–3 to 3 MV cm −1 ). While the lack of ferroelectric order in SrHfO 3 removes the potential for MPB, structural and property evolution of the Pb 1− x Sr x HfO 3 (0 ≤ x < 1) system is explored. Strontium alloying increased the electric‐breakdown strength ( E B ) and decreased hysteresis loss, thus enhancing the capacitive energy storage density ( U r ) and efficiency (η). The composition, Pb 0.5 Sr 0.5 HfO 3 produced the best combination of E B = 5.12 ± 0.5 MV cm −1 , U r = 77 ± 5 J cm −3 , and η = 97 ± 2%, well out‐performing PbHfO 3 and other antiferroelectric oxides.

Acharya, Megha↗
DOE OSTI2022

Spin–Phonon Coupling in Ferromagnetic Monolayer Chromium Tribromide

Novel 2D magnets exhibit intrinsic electrically tunable magnetism down to the monolayer limit, which has significant value for nonvolatile memory and emerging computing device applications. In these compounds, spin–phonon coupling (SPC) typically plays a crucial role in magnetic fluctuations, magnon dissipation, and ultimately establishing long-range ferromagnetic order. However, a systematic understanding of SPC in 2D magnets that combines theory and experiment is still lacking. Here in this work, monolayer chromium tribromide is studied to investigate SPC in 2D magnets via Raman spectroscopy and first principle calculations. The experimental Curie temperature and phonon shifts are found to be in good agreement with the numerical simulations. Specifically, it is demonstrated how magnetic exchange interactions affect phonon vibrations, which helps establish design fundamentals for 2D magnetic materials and other related devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Solution-Deposited and Patternable Conductive Polymer Thin-Film Electrodes for Microbial Bioelectronics

Microbial bioelectronic devices integrate naturally occurring or synthetically engineered electroactive microbes with microelectronics. These devices have a broad range of potential applications, but engineering the biotic–abiotic interface for biocompatibility, adhesion, electron transfer, and maximum surface area remains a challenge. Prior approaches to interface modification lack simple processability, the ability to pattern the materials, and/or a significant enhancement in currents. We report a novel conductive polymer coating that significantly enhances current densities relative to unmodified electrodes in microbial bioelectronics is reported. The coating is based on a blend of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) crosslinked with poly(2-hydroxyethylacrylate) (PHEA) along with a thin polydopamine (PDA) layer for adhesion to an underlying indium tin oxide (ITO) electrode. When used as an interface layer with the current-producing bacterium Shewanella oneidensis MR-1, this material produces a 178-fold increase in the current density compared to unmodified electrodes, a current gain that is higher than previously reported thin-film 2D coatings and 3D conductive polymer coatings. The chemistry, morphology, and electronic properties of the coatings are characterized and the implementation of these coated electrodes for use in microbial fuel cells, multiplexed bioelectronic devices, and organic electrochemical transistor based microbial sensors are demonstrated. It is envisioned that this simple coating will advance the development of microbial bioelectronic devices.

patterned bioelectronics↗
DOE OSTI2022

Polymerized Small Molecular Acceptor with Branched Side Chains for All Polymer Solar Cells with Efficiency over 16.7%

The power conversion efficiencies (PCEs) of small molecule acceptor (SMA)-based organic solar cells have already exceeded 18%. However, the development of polymer acceptors still lags far behind their SMA counterparts mainly due to the lack of efficient polymer acceptors. In this work, a series of polymer acceptors named PY-X (with X being the branched alkyl chain) are designed and synthesized by employing the same central core with the SMA L8-BO but with different branched alkyl chains on the pyrrole motif. It is found that the molecular packing of SMA-HD featuring 2-hexyldecyl side chain used in the synthesis of PY-HD is similar to L8-BO, in which the branched alkyl chains lead to condensed and high-order molecular assembly in SMA-HD molecules. When combined with PM6, PY-HD-based all polymer solar cell (all-PSC) exhibits a high PCE of 16.41%, representing the highest efficiency for the binary all-PSCs. Moreover, the side-chain modification on the pyrrole site position further improves the performance of the all-PSCs, and the PY-DT-based device delivers a new record high efficiency of 16.76% (certified as 16.3%). The work provides new insights for understanding the structure–property relationship of polymer acceptors and paves a feasible avenue to develop efficient conjugated polymer acceptors.

14 SOLAR ENERGY↗
DOE OSTI2022

Stretchable Redox‐Active Semiconducting Polymers for High‐Performance Organic Electrochemical Transistors

Abstract Organic electrochemical transistors (OECTs) represent an emerging device platform for next‐generation bioelectronics owing to the uniquely high amplification and sensitivity to biological signals. For achieving seamless tissue–electronics interfaces for accurate signal acquisition, skin‐like softness and stretchability are essential requirements, but they have not yet been imparted onto high‐performance OECTs, largely due to the lack of stretchable redox‐active semiconducting polymers. Here, a stretchable semiconductor is reported for OECT devices, namely poly(2‐(3,3′‐bis(2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)‐[2,2′‐bithiophen]‐5)yl thiophene) (p(g2T‐T)), which gives exceptional stretchability over 200% strain and 5000 repeated stretching cycles, together with OECT performance on par with the state‐of‐the‐art. Validated by systematic characterizations and comparisons of different polymers, the key design features of this polymer that enable the combination of high stretchability and high OECT performance are a nonlinear backbone architecture, a moderate side‐chain density, and a sufficiently high molecular weight. Using this highly stretchable polymer semiconductor, an intrinsically stretchable OECT is fabricated with high normalized transconductance (≈223 S cm −1 ) and biaxial stretchability up to 100% strain. Furthermore, on‐skin electrocardiogram (ECG) recording is demonstrated, which combines built‐in amplification and unprecedented skin conformability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Salt-Assisted 2H-to-1T' Phase Transformation of Transition Metal Dichalcogenides [plus supplemental information]

Phase engineering of nanomaterials (PEN) has demonstrated great potential in the fields of catalysis, electronics, energy storage and conversion, and condensed matter physics. Recently, transition metal dichalcogenides (TMDs) with unconventional metastable phases (e.g., 1T and 1T') have attracted increasing research interest due to their unique and appealing physicochemical properties. However, there is still a lack of a simple, universal, and controlled method for the preparation of large-scale and high-purity unconventional-phase TMD crystals, restricting their further fundamental study and practical applications. Here, a facile, one-step salt-assisted general strategy is reported for the controlled phase transformation of commercially available TMDs with conventional 2H phase, yielding a large amount of metastable 1T'-phase TMDs, including WS 2 , WSe 2 , MoS 2 , and MoSe 2 . It is found that the easily accessible metal salts, such as K 2 C 2 O 4 ·H 2 O, K 2 CO 3 , Na 2 CO 3 , Rb 2 CO 3 , Cs 2 CO 3 , KHCO 3 , NaHCO 3 , and NaC 2 O 4 , can be used to assist the 2H-to-1T' phase transformation, greatly simplifying the synthetic process for producing metastable 1T'-TMDs. Importantly, this method can also be used to prepare 1T'-TMD alloys, such as 1T'-WS 2x Se 2(1–x) . We report this newly developed strategy is robust and highly effective, which can also be used for the phase engineering of other materials with various polymorphs.

1T′ phase↗
DOE OSTI2022

Establishing Self-Dopant Design Principles from Structure–Function Relationships in Self-n-Doped Perylene Diimide Organic Semiconductors

Self-doping is a particular doping method that has been applied to a wide range of organic semiconductors. However, there is a lack of understanding regarding the relationship between dopant structure and function. A structurally diverse series of self-n-doped perylene diimides (PDIs) is investigated to study the impact of steric encumbrance, counterion selection, and dopant/PDI tether distance on functional parameters such as doping, stability, morphology, and charge-carrier mobility. The studies show that self-n-doping is best enabled by the use of sterically encumbered ammoniums with short tethers and Lewis basic counterions. Additionally, water is found to inhibit doping, which concludes that thermal degradation is merely a phenomenological feature of certain dopants, and that residual solvent evaporation is the primary driver of thermally activated doping. In situ grazing-incidence wide-angle X-ray scattering studies show that sample annealing increases the π–π stacking distance and shrinks grain boundaries for improved long-range ordering. These features are then correlated to contactless carrier-mobility measurements with time-resolved microwave conductivity before and after thermal annealing. In conclusion, the collective relationships between structural features and functionality are finally used to establish explicit self-n-dopant design principles for the future design of materials with improved functionality.

36 MATERIALS SCIENCE↗
DOE OSTI2022

ECRAM Materials, Devices, Circuits and Architectures: A Perspective

Abstract Non‐von‐Neumann computing using neuromorphic systems based on two‐terminal resistive nonvolatile memory elements has emerged as a promising approach, but its full potential has not been realized due to the lack of materials and devices with the appropriate attributes. Unlike memristors, which require large write currents to drive phase transformations or filament growth, electrochemical random access memory (ECRAM) decouples the “write” and “read” operations using a “gate” electrode to tune the conductance state through charge‐transfer reactions, and every electron transferred through the external circuit in ECRAM corresponds to the migration of ≈1 ion used to store analogue information. Like static dopants in traditional semiconductors, electrochemically inserted ions modulate the conductivity by locally perturbing a host's electronic structure; however, ECRAM does so in a dynamic and reversible manner. The resulting change in conductance can span orders of magnitude, from gradual increments needed for analog elements, to large, abrupt changes for dynamically reconfigurable adaptive architectures. In this in‐depth perspective, the history of ECRAM, the recent progress in devices spanning organic, inorganic, and 2D materials, circuits, architectures, the rich portfolio of challenging, fundamental questions, and how ECRAM can be harnessed to realize a new paradigm for low‐power neuromorphic computing are discussed.

Talin, A. Alec↗
DOE OSTI2022

Electro-Thermal Characterization of Dynamical VO 2 Memristors via Local Activity Modeling

We report translating the surging interest in neuromorphic electronic components, such as those based on nonlinearities near Mott transitions, into large-scale commercial deployment faces steep challenges in the current lack of means to identify and design key material parameters. These issues are exemplified by the difficulties in connecting measurable material properties to device behavior via circuit element models. Here, the principle of local activity is used to build a model of VO 2 /SiN Mott threshold switches by sequentially accounting for constraints from a minimal set of quasistatic and dynamic electrical and high-spatial-resolution thermal data obtained via in situ thermoreflectance mapping. By combining independent data sets for devices with varying dimensions, the model is distilled to measurable material properties, and device scaling laws are established. The model can accurately predict electrical and thermal conductivities and capacitances and locally active dynamics (especially persistent spiking self-oscillations). The systematic procedure by which this model is developed has been a missing link in predictively connecting neuromorphic device behavior with their underlying material properties, and should enable rapid screening of material candidates before employing expensive manufacturing processes and testing procedures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Panoramic Mapping of Phonon Transport from Ultrafast Electron Diffraction and Scientific Machine Learning

Abstract One central challenge in understanding phonon thermal transport is a lack of experimental tools to investigate frequency‐resolved phonon transport. Although recent advances in computation lead to frequency‐resolved information, it is hindered by unknown defects in bulk regions and at interfaces. Here, a framework that can uncover microscopic phonon transport information in heterostructures is presented, integrating state‐of‐the‐art ultrafast electron diffraction (UED) with advanced scientific machine learning (SciML). Taking advantage of the dual temporal and reciprocal‐space resolution in UED, and the ability of SciML to solve inverse problems involving coupled Boltzmann transport equations, the frequency‐dependent interfacial transmittance and frequency‐dependent relaxation times of the heterostructure from the diffraction patterns are reliably recovered. The framework is applied to experimental Au/Si UED data, and a transport pattern beyond the diffuse mismatch model is revealed, which further enables a direct reconstruction of real‐space, real‐time, frequency‐resolved phonon dynamics across the interface. The work provides a new pathway to probe interfacial phonon transport mechanisms with unprecedented details.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Widely Tunable Berry Curvature in the Magnetic Semimetal Cr 1+ δ Te 2

Abstract Magnetic semimetals have increasingly emerged as lucrative platforms hosting spin‐based topological phenomena in real and momentum spaces. Cr 1+ δ Te 2 is a self‐intercalated magnetic transition metal dichalcogenide (TMD), which exhibits topological magnetism and tunable electron filling. While recent studies have explored real‐space Berry curvature effects, similar considerations of momentum‐space Berry curvature are lacking. Here, the electronic structure and transport properties of epitaxial Cr 1+ δ Te 2 thin films are systematically investigated over a range of doping, δ (0.33 – 0.71). Spectroscopic experiments reveal the presence of a characteristic semi‐metallic band region, which shows a rigid like energy shift with δ. Transport experiments show that the intrinsic component of the anomalous Hall effect (AHE) is sizable and undergoes a sign flip across δ. Finally, density functional theory calculations establish a link between the doping evolution of the band structure and AHE: the AHE sign flip is shown to emerge from the sign change of the Berry curvature, as the semi‐metallic band region crosses the Fermi energy. These findings underscore the increasing relevance of momentum‐space Berry curvature in magnetic TMDs and provide a unique platform for intertwining topological physics in real and momentum spaces.

36 MATERIALS SCIENCE↗
DOE OSTI2023

All‐Liquid Reconfigurable Electronics Using Jammed MXene Interfaces

Abstract Rigid, solid‐state components represent the current paradigm for electronic systems, but they lack post‐production reconfigurability and pose ever‐increasing challenges to efficient end‐of‐life recycling. Liquid electronics may overcome these limitations by offering flexible in‐the‐field redesign and separation at end‐of‐life via simple liquid phase chemistries. Up to now, preliminary work on liquid electronics has focused on liquid metal components, but these devices still require an encapsulating polymer and typically use alloys of rare elements like indium. Here, using the self‐assembly of jammed 2D titanium carbide (Ti 3 C 2 T x ) MXene nanoparticles at liquid–liquid interfaces, “all‐liquid” electrically conductive sheets, wires, and simple functional devices are described including electromechanical switches and photodetectors. These assemblies combine the high conductivity of MXene nanosheets with the controllable form and reconfigurability of structured liquids. Such configurations can have applications not only in electronics, but also in catalysis and microfluidics, especially in systems where the product and substrate have affinity for solvents of differing polarity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synthesis of Zwitterionic CsPbBr 3 Nanocrystals with Controlled Anisotropy using Surface‐Selective Ligand Pairs

Abstract Mechanistic studies of the morphology of lead halide perovskite nanocrystals (LHP‐NCs) are hampered by a lack of generalizable suitable synthetic strategies and ligand systems. Here, the synthesis of zwitterionic CsPbBr 3 NCs is presented with controlled anisotropy using a proposed “surface‐selective ligand pairs” strategy. Such a strategy provides a platform to systematically study the binding affinity of capping ligand pairs and the resulting LHP morphologies. By using zwitterionic ligands (ZwL) with varying structures, majority ZwL‐capped LHP NCs with controlled morphology are obtained, including anisotropic nanoplatelets and nanorods, for the first time. Combining experiments with density functional theory calculations, factors that govern the ligand binding on the different surface facets of LHP‐NCs are revealed, including the steric bulkiness of the ligand, the number of binding sites, and the charge distance between binding moieties. This study provides guidance for the further exploration of anisotropic LHP‐NCs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Phase Selection Rules of Multi‐Principal Element Alloys

Abstract Computational prediction of phase stability of multi‐principal element alloys (MPEAs) holds a lot of promise for rapid exploration of the enormous design space and autonomous discovery of superior structural and functional properties. Regardless of many plausible works that rely on phenomenological theory and machine learning, precise prediction is still limited by insufficient data and the lack of interpretability of some machine learning algorithms, e.g., convolutional neural network. In this work, a comprehensive approach is presented, encompassing the development of a complete dataset that contains 72 387 density functional theory calculations, as well as a predictive global phenomenological descriptor. The phase selection descriptor, based on atomic electronegativity and valence electron concentration, significantly outperforms the widely used valence electron concentration, excelling in both accuracy (with an f1 score of 63% compared to 47%) and its ability to predict the HCP phase (0.48 recall compared to 0). The comprehensive data mining on the global design space of 61 425 quaternary MPEAs made from 28 possible metals, together with the phenomenological theory and physical interpretation, will set up a solid computational science foundation for data‐driven exploration of MPEAs.

Chemistry↗