Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Pressure pulsations on a flat plate normal to an underexpanded supersonic jet

An experiment was devised to study the interaction between an underexpanded supersonic gas jet and a flat plate, with the plate located in a region in which the interaction produces shock wave and flow fluctuations. Nitrogen gas at ambient stagnation temperature flowed through a convergent nozzle with exit diameter of 2.03 cm and impinged on a square metal plate normal to the jet. Results revealed local peak pressure fluctuations on the plate at nozzle pressure ratios of about 2 and 4.5, with the latter case producing fluctuations of the same order as the mean pressure on the plate; the frequency of the oscillations was as large as 20 kHz. For choked jet flow at ambient pressure higher than atmospheric, the pressure fluctuations would increase accordingly, and adjacent solid structures would therefore be subjected to proportionately higher normal stresses.

Back, L. H.↗
NASA NTRS1978

Experimental investigation of effect of jet decay rate on jet-induced pressures on a flat plate

An experimental study of the interaction between a lift jet and an aircraft wing for a jet VTOL aircraft was performed for the simplified model of an unheated, subsonic, circular jet exiting at right angles to a flat plate into a uniform subsonic crosswind. The effects of jet dynamic pressure decay rate upon the jet location and jet induced pressure distribution on the plate were studied over a range of jet to crossflow velocity ratios of 2.2 or = R or = 10. Jet decay rate was varied through use of cylindrical centerbodies with flat or hemispherical tips submerged in the jet nozzle at various depths below the jet exit plane. Quicker jet dynamic pressure decay, caused by the presence of a centerbody, resulted in reductions in the jet induced lift loss by as much as 45 percent relative to values for jets with no centerbody. These reductions in lift loss were observed at the larger values of crossflow velocity.

Kuhlman, J. M.↗
NASA NTRS1984

Recent observations on the structure of an edge-tone flow field

An experimental investigation of the flow field generated with a subsonic air jet (M = 0.18-0.8) issuing from a rectangular nozzle having a top hat mean exit velocity profile impinging on a 20 deg wedge has been carried out. The interaction of the jet with an edge involves formation of primary vorticies in the shear layer surrounding the jet and secondary vorticies near the tip of the wedge. These vorticies form vortex pairs and eventually merge to form a single large vortex, and moves downstream along the surface of the wedge. Phase averaged flow survey measurements also depict the counter-rotating vortex pair moving along the surface of the wedge. The instantaneous pressure distribution on the surface of the wedge shows that the unsteady pressure remains zero at the leading edge for the entire motion cycle. For a given edge height, the narrow band spectrum of the near field pressure signals indicate the simultaneous existence of several frequencies, which are not harmonically related.

Krothapalli, A.↗
NASA NTRS1994

Mixing processes within the polar night jet

Lagrangian material line simulations are performed using U.K. Meteorological Office simulated winds and temperatures to examine mixing processes in the middle- and lower-stratospheric polar night jet during the 1992 Southern Hemisphere spring and Northern Hemisphere winter. The Lagrangian simulations are undertaken to provide insight into the effects of mixing within the polar night jet on observations of the polar vortex made by instruments onboard the Upper Atmosphere Research Satellite (UARS) during these periods. A moderate to strong kinematic barrier to large-scale isentropic exchange, similar to the barrier identified in General Circulation Model (GCM) simulations, is identified during both of these periods. Characteristic timescales for mixing by large-scale isentropic motions within the polar night jet range from 20 days in the Southern Hemisphere lower stratosphere to years in the Northern Hemisphere middle stratosphere. The long mixing timescales found in the Northern Hemisphere polar night jet do not persist. Instead, the Northern Hemisphere kinematic barriers are broken down as part of the large-scale stratospheric response to a strong tropospheric blocking event. A series of Lagrangian experiments are conducted to investigate the sensitivity of the kinematic barrier to diabatic effects and to small-scale inertial gravity wave motions. Differential diabatic descent is found to have a significant impact on mixing processes within the Southern Hemisphere middle-stratospheric jet core. The interaction between small-scale displacements by idealized, inertial gravity waves and the large-scale flow is found to have a significant impact on mixing within the polar night jet in both hemispheres. These sensitivity experiments suggest that scales of motion that are unresolved in global assimilated datasets may contribute to mass exchange across the kinematic barrier to large-scale isentropic motion.

Pierce, R. Bradley↗
NASA NTRS2000

Interfacial Stability of Spherically Converging Plasma Jets for Magnetized Target Fusion

A fusion propulsion scheme has been proposed that makes use of the merging of a spherical distribution of plasma jets to dynamically form a gaseous liner to implode a magnetized target to produce the fusion reaction. In this paper, a study is made of the interfacial stability of the interaction of these jets. Specifically, the Orr-Sommerfeld equation is integrated to obtain the growth rate of a perturbation to the primary flow at the interface between the colliding jets. The results lead to an estimate on the tolerances on the relative flow velocities of the merging plasma jets to form a stable, imploding liner. The results show that the maximum temporal growth rate of the perturbed flow at the jet interface is very small in comparison with the time to full compression of the liner. These data suggest that, as far as the stability of the interface between the merging jets is concerned, the formation of the gaseous liner can withstand velocity variation of the order of 10% between the neighboring jets over the density and temperature ranges investigated.

Thio, Y. C. Francis↗
NASA NTRS2001

Interfacial Stability of Converging Plasma Jets for Magnetized Target Fusion

The merging of a spherical distribution of plasma jets to dynamically form a gaseous liner has been proposed for use in magnetized target fusion propulsion. In this paper, a study is made of the interfacial stability of the interaction of these jets. Specifically, the Orr-Sommerfeld equation is integrated to obtain the growth rate of a perturbation to the primary flow at the interface between the colliding jets. The analysis lead to an estimate on the tolerances on the relative flow velocities of the merging plasma jets to form a stable, imploding liner. The results show that during the merging of the jets to form a liner and before contact with the target plasma the growth of the perturbed flow at the jet interface is not likely to destabilize the liner. These data suggest that, as far as the stability of the interface between the merging jets is concerned, the formation of liner can withstand velocity variation up to 50% between the neighboring jets over the density and temperature ranges investigated.

Cassibry, J. T.↗
NASA NTRS2006

Reducing Propulsion Airframe Aeroacoustic Interactions with Uniquely Tailored Chevrons: Isolated Nozzles - 1.

The flow/acoustic environment surrounding an engine nozzle installed on an airplane, say, under the wing, is asymmetric due to the pylon, the wing and the interaction of the exhaust jet with flaps on the wing. However, the conventional chevrons, which are azimuthally uniform serrations on the nozzle lip, do not exploit the asymmetry due to these propulsion airframe aeroacoustic interactions to reduce jet noise. In this pioneering study we use this non-axisymmetry to our advantage and examine if the total jet-related noise radiated to the ground can be reduced by using different types of azimuthally varying chevrons (AVC) which vary the mixing around the nozzle periphery. Several scale models of the isolated nozzle, representative of high bypass ratio engine nozzles, were made with a pylon and azimuthally varying chevrons on both fan and core nozzles to enhance mixing at the top (near the pylon) with less mixing at the bottom (away from the pylon) or vice versa. Various combinations of fan and core AVC nozzles were systematically tested at typical take-off conditions inside a free jet wind-tunnel and, here, in Part 1 we analyze the acoustics results for the isolated nozzle with a pylon, with installation effects reported in Parts 2 and 3. Several interesting results are discovered: amongst the fan AVCs the top-enhanced mixing T-fan chevron nozzle is quieter in combination with any core AVC nozzle when compared to conventional chevrons; however, the bottom-mixing B-fan chevrons, as well as the core AVC nozzles, by themselves, are noisier. Further, the low-frequency source strengths in the jet plume, obtained via phased microphone arrays, also corroborate the far field sound, and for the T-fan chevrons such sources move further downstream than those for baseline or conventional chevron nozzles.

Mengle, Vinod G.↗
NASA NTRS1984

A numerical simulation of barotropic instability. I Wave-mean flow interaction

A numerical model is used to study the evolution of the barotropic point jet instability as it interacts with the mean flow. The linearized instability solution agrees well with the recent analytical solutions of Lindzen. Stabilization of the point jet instability occurs as the mean flow is modified by wave vorticity transport. Assuming stabilization occurs when the meridional gradient of the zonal mean vorticity is no longer negative, the maximum integrated wave enstrophy can be predicted. In addition, an estimate of the integrated wave enstrophy at steady state can be made by balancing the generation of vorticity against dissipation. These limits are found to be in good agreement with the numerical results.

Schoeberl, M. R.↗
NASA NTRS1989

The radiative deceleration of ultrarelativistic jets in active galactic nuclei

A detailed study of the dynamical interaction between a highly relativistic jet and the thermal radiation field from an AGN accretion disk is reported, and the Comptonized spectrum arising from this interaction is self-consistently determined. A simple model that captures the essential radiative and geometrical features of realistic disk configurations is presented, and the disk radiation field is calculated. The results confirm Phinney's (1987) suggestion that the thermal radiation field produced by accretion in an AGN could be very effective in decelerating ultrarelativistic jets that are accreted by electromagnetic or hydromagnetic forces closer to the central black hole. Terminal Lorentz factors are consistent with the values inferred in superluminal radio sources are readily produced in this model for plausible disk and jet parameters without additional acceleration in the interaction zone. A new interpretation of the hard X-ray component detected in BL Lac spectra is proposed.

Melia, Fulvio↗
DOE OSTI2024

Search for flavor changing neutral current interactions of the top quark in final states with a photon and additional jets in proton-proton collisions at s = 13 TeV

A search for the production of a top quark in association with a photon and additional jets via flavor changing neutral current interactions is presented. The analysis uses proton-proton collision data recorded by the CMS detector at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 138 fb - 1 . The search is performed by looking for processes where a single top quark is produced in association with a photon, or a pair of top quarks where one of the top quarks decays into a photon and an up or charm quark. Events with an electron or a muon, a photon, one or more jets, and missing transverse momentum are selected. Multivariate analysis techniques are used to discriminate signal and standard model background processes. No significant deviation is observed over the predicted background. Observed (expected) upper limits are set on the branching fractions of top quark decays: B ( t → u γ ) < 0.95 × 10 - 5 ( 1.20 × 10 - 5 ) and B ( t → c γ ) < 1.51 × 10 - 5 ( 1.54 × 10 - 5 ) at 95% confidence level, assuming a single nonzero coupling at a time. The obtained limit for B ( t → u γ ) is similar to the current best limit, while the limit for B ( t → c γ ) is significantly tighter than previous results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2015

Design and Characterization of a New Nozzle in a NASA Arc-Jet

The design of a new 76 mm (3 inch) nozzle of the Interaction Heating Facility arc jet at NASA Ames Research Center is described. The computational efforts which were an integral part of the preliminary design and characterization of the nozzle are described as well. Details of heat flux measurements made in this new nozzle are provided. Apart from showing the flow characteristics of the nozzle, predictions of stagnation point heat flux are compared against measurements made with a nullpoint calorimeter; the agreement between computation and measurement is found to be good. Unfortunately, pressure measurements could not be made in the first round. The predicted stagnation point pressures and heat fluxes, with appropriate scaling for a 25 mm (1 inch) diameter iso-q geometry (reference geometry), are used to establish a provisional operating envelope for the new nozzle. The envelope is shown to enclose relevant heating portions of representative atmospheric trajectories at Venus and Saturn.

Arcjet↗
NASA NTRS1990

An infrared jet in Centaurus A (NGC 5128): Evidence for interaction between the active nucleus and the interstellar medium

In the present study, higher resolution near infrared images of the visually-obscured central region of Centaurus A were obtained in order to investigate the effects of the active nucleus on the surrounding galaxy. Researchers present J(1.25 microns), H(1.65 microns), and K(2.2 microns) images of the central 40 seconds of the galaxy, taken with the Univ. of Texas InSb array camera on the Anglo Australian 3.9 meter telescope. These images reveal a jet extending approx. 10 arcseconds to the northeast of the nucleus at the same position angle as the x ray and radio jets. The infrared jet is most prominent at the shortest wavelength (1.25 microns), where its brightness surpasses that of the nucleus. The blue appearance of the infrared jet is remarkable considering the heavy obscuration that is evident at visual wavelengths. The amount of reddening in the vicinity of the jet is determined from the measured colors of the stellar core of the galaxy, and this value is used to generate an extinction-corrected energy distribution. In contrast to previously studied optical and infrared jets in active nuclei, the short-wavelength prominence of the Cen A jet indicates that it cannot be attributed to synchrotron emission from a beam of relativistic electrons. The remaining viable mechanisms involve an interaction between the interstellar medium and the active nucleus: the infrared radiation from the jet may be due to emission from interstellar gas that has been entrained and heated by the flow of relativistic particles from the nucleus; alternatively, luminous blue stars may have been created by compression of interstellar material by the relativistic plasma. To investigate these proposed mechanisms, near-infrared spectroscopic studies of Cen A are in progress to look for collisionally excited molecular hydrogen emission lines and recombination lines from ionized gas.

Joy, Marshall↗
NASA NTRS1974

Heat transfer and film cooling following injection through inclined circular tubes

Film cooling effectiveness and heat transfer are measured downstream of injection through discrete holes into a turbulent mainstream boundary layer. Air is injected through both a single hole and a row of holes spaced at three-diameter intervals and inclined at an angle of 35 deg to the main flow. There is little difference between the heat transfer coefficient with blowing and without blowing at low blowing rates (mass flux ratios). In fact, at low blowing rates, injection is found to decrease somewhat the heat transfer coefficient from that measured without blowing. As the mass flux ratio increases past unity, the heat transfer coefficient increases, especially with injection through a row of holes. The peak heat transfer is usually found at the edge of the spreading jets (i.e., between two holes). At a blowing rate near two, the lateral average of the heat transfer is as much as 27 percent higher than the heat transfer with no blowing. The increase in heat transfer is attributed to the interaction between the jets and the free stream, causing high levels of turbulence.

Eriksen, V. L.↗
NASA NTRS2006

Flight Test Results for Uniquely Tailored Propulsion-Airframe Aeroacoustic Chevrons: Community Noise

The flow/acoustic environment around the jet exhaust of an engine when installed on an airplane, say, under the wing, is highly asymmetric due to the pylon, the wing and the high-lift devices. Recent scale model tests have shown that such Propulsion Airframe Aeroacoustic (PAA) interactions and the jet mixing noise can be reduced more than with conventional azimuthally uniform chevrons by uniquely tailoring the chevrons to produce enhanced mixing near the pylon. This paper describes the community noise results from a flight test on a large twin-engine airplane using this concept of azimuthally varying chevrons for engines installed under the wing. Results for two different nozzle configurations are described: azimuthally varying "PAA T-fan" chevrons on the fan nozzle with a baseline no-chevron core nozzle and a second with PAA T-fan chevrons with conventional azimuthally uniform chevrons on the core nozzle. We analyze these test results in comparison to the baseline no-chevron nozzle on both spectral and integrated power level bases. The study focuses on the peak jet noise reduction and the effects at high frequencies for typical take-off power settings. The noise reduction and the absolute noise levels are then compared to model scale results. The flight test results verify that the PAA T-fan nozzles in combination with standard core chevron nozzles can, indeed, give a reasonable amount of noise reduction at low frequencies without high-frequency lift during take-off conditions and hardly any impact on the cruise thrust coefficient.

Nesbitt, Eric↗
NASA NTRS1980

The near field interaction between a sound pulse and a jet shear layer

The in-flow and near field of a jet which is excited by an axial mass source located in the potential core is simulated numerically, taking due account of the jet spreading, and experimentally, using a shock-tube driver. Comparison is made for both excited and unexcited jets. It is shown that many of the features observed experimentally are consequences of the instability of the mean flow profile and not of turbulence. This instability is shown to be a significant amplifier of low frequency sound. The terms responsible for this amplification are those describing action between the fluctuating velocities and the gradient of the mean flow, which were identified by Ribner as the shear noise terms. The results demonstrate that a primary component of the observed shear noise in jets is generated by the mean profile instability.

Bayliss, A.↗
NASA NTRS1987

Force and moment tests to determine the interaction effects of the reaction control system jet plumes on the space shuttle Orbiter aerodynamics at Mach Number 6 (Test OA352)

The purpose of this test was to expand the existing Space Shuttle aerodynamics and Reaction Control System (RCS) data base to support the Glide Return to Launch Site (GRTLS) abort trajectory and the new Digital Autopilot. An existing model of the orbiter was used to investigate the aerodynamic effects of several combinations of RCS thrusters and thruster momentum ratios at Mach number 6. Two separate model installations were used to achieve an angle-of-attack range of -11 to 46 deg. The test was conducted at a unit Reynolds number of 0.8 x 10 to the 6th per foot.

Cayse, Robert W.↗
NASA NTRS1994

Fluid-acoustic interactions in a low area ratio supersonic jet ejector

An experimental investigation carried out to determine aerodynamic and acoustic characteristics of a low area ratio rectangular jet ejector is reported. A supersonic primary jet issuing from a rectangular convergent-divergent nozzle of aspect ratio 4, into a rectangular duct of area ratio 3, was used. Improved performance was found when the ejector screech tone is most intense and appears to match the most unstable Strouhal number of the free rectangular jet. When the primary jet was operating at over and ideally expanded conditions, significant noise reduction was obtained with the ejector as compared to a corresponding free jet. Application of particle image velocimetry to high speed ejector flows was demonstrated through the measurement of instantaneous two dimensional velocity fields.

Krothapalli, Anjaneyulu↗