Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

An Outburst Scenario for the X-ray Spectral Variability in 3C 111

We present a combined Suzaku and Swift BAT broad-band E=0.6-200 keV spectral analysis of three 3C 111 observations obtained in 2010. The data are well described with an absorbed power-law continuum and a weak (R approximately equal to 0.2) cold reflection component from distant material. We constrain the continuum cutoff at E(sub C) approximately equal to 150- 200 keV, which is in accordance with X-ray Comptonization corona models and supports claims that the jet emission is only dominant at much higher energies. Fe XXVI Ly alpha emission and absorption lines are also present in the first and second observations, respectively. The modelling and interpretation of the emission line is complex and we explore three possibilities. If originating from ionized disc reflection, this should be emitted at r(sub in) greater than or equal to 50 r(sub g) or, in the lamp-post configuration, the illuminating source should be at a height of h greater than or equal to 30 r(sub g) over the black hole. Alternatively, the line could be modeled with a hot collisionally ionized plasma with temperature kT = 22.0(sup +6.1)(sub −3.2) keV or a photo-ionized plasma with logXi=4.52(sup +0.10)(sub −0.16) erg per second cm, and column density N(sub H) greater than 3×10(sup 23) per square centimeter. However, the first and second scenarios are less favored on statistical and physical grounds, respectively. The blue-shifted absorption line in the second observation can be modelled as an ultra-fast outflow (UFO) with ionization parameter logXi=4.47(sup +0.76) (sub −0.04) erg per second cm, column density NH=(5.3(sup +1.8)(sub −1.3))×10(sup 22) per square centimeter and outflow velocity v(sub out) = 0.104+/-0.006c. Interestingly, the parameters of the photoionized emission model remarkably match those of the absorbing UFO, supporting the possibility that the same material could be responsible for both emission and absorption. We suggest an outburst scenario in which an accretion disc wind, initially lying out of the line of sight and observed in emission, then crosses our view to the source and it is observed in absorption as a mildly-relativistic UFO.

Outburst↗

A discontinuous Galerkin conservative level set scheme for interface capturing in multiphase flows

The accurate conservative level set (ACLS) method of Desjardins et al. [O. Desjardins, V. Moureau, H. Pitsch, An accurate conservative level set/ghost fluid method for simulating turbulent atomization, J. Comput. Phys. 227 (18) (2008) 8395–8416] is extended by using a discontinuous Galerkin (DG) discretization. DG allows for the scheme to have an arbitrarily high order of accuracy with the smallest possible computational stencil resulting in an accurate method with good parallel scaling. This work includes a DG implementation of the level set transport equation, which moves the level set with the flow field velocity, and a DG implementation of the reinitialization equation, which is used to maintain the shape of the level set profile to promote good mass conservation. A near second order converging interface curvature is obtained by following a height function methodology (common amongst volume of fluid schemes) in the context of the conservative level set. Various numerical experiments are conducted to test the properties of the method and show excellent results, even on coarse meshes. The tests include Zalesak’s disk, two-dimensional deformation of a circle, time evolution of a standing wave, and a study of the Kelvin–Helmholtz instability. Finally, this novel methodology is employed to simulate the break-up of a turbulent liquid jet.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thunderstorm vertical velocities estimated from satellite data

Infrared geosynchronous satellite data with an interval of 5 min between images are used to estimate thunderstorm top ascent rates on two case study days. A mean vertical velocity of 3.4 m/sec for 23 clouds is calculated at a height of 8.7 km. This upward motion is representative of an area of approximately 10 km on a side. Thunderstorm mass flux of approximately 2 times 10 to the 8th power kg/sec is calculated, which compares favorably with previous estimates. There is a significant difference in the mean calculated vertical velocity between elements associated with severe weather reports (omega = 4.9 m/sec) and those with no such reports (2.4 m/sec). Calculations were made using a velocity profile for an axially symmetric jet to estimate the peak updraft velocity. For the largest observed omega value of 7.8 m/sec the calculation indicates a peak updraft of approximately 50 m/sec.

Adler, R. F.↗

A Moments View of Climatology and Variability of the Asian Summer Monsoon Anticyclone

A comprehensive investigation of the climatology of and interannual variability and trends in the Asian summer monsoon anticyclone (ASMA) is presented, based on a novel area and moments analysis. Moments include centroid location, aspect ratio, angle, and “excess kurtosis” (measuring how far the shape is from elliptical) for an equivalent ellipse with the same area as the ASMA. Key results are robust among the three modern reanalyses studied. The climatological ASMA is nearly elliptical, with its major axis aligned along its centroid latitude and a typical aspect ratio of ∼5–8. The ASMA centroid shifts northward with height, northward and westward during development, and in the opposite direction as it weakens. New evidence finding no obvious climatological bimodality in the ASMA reinforces similar suggestions from previous studies using modern reanalyses. Most trends in ASMA moments are not statistically significant. ASMA area and duration, however, increased significantly during 1979–2018; the 1958–2018 record analyzed for one reanalysis suggests that these trends may have accelerated in recent decades. ASMA centroid latitude is significantly positively (negatively) correlated with subtropical jet core latitude (altitude), and significantly negatively correlated with concurrent ENSO; these results are consistent with and extend previous work relating monsoon intensity, ENSO, and jet shifts. ASMA area is significantly positively correlated with the MEI ENSO index two months previously. These results improve our understanding of the ASMA using consistently defined diagnostics of its size, geometry, interannual variability, and trends that have not previously been analyzed.

Anticyclone↗

Measurements of mesospheric water vapor in 1984 and 1985 - Results and implications for middle atmospheric transport

The detailed results of ground-based mesospheric water vapor measurements obtained by microwave spectroscopy at the Jet Propulsion Laboratory (JPL) from December 1984 to April 1985 (JPL 1984/85), and an overview of results obtained the previous year from April to June 1984 are presented. The JPL 1984/85 spectral data appeared to contain an instrumental baseline curvature which was bracketed and removed. In general, the JPL 1984/85 results are in good agreement with those of previous measurements. They indicate water vapor mixing ratios between 6 and 8 ppmv at 60 or 65 km and falling off steeply with height above this point to values of less than 2 ppmv at 80 km. In addition, there is a large amount of day-to-day variability indicated in the data. A major result of the study is that it is found that both the observed vertical gradient of water vapor mixing ratio and its seasonal variation are consistent with the hypothesis that vertical transport time scales are smaller, perhaps by an order of magnitude, than values currently used in both one- and two-dimensional photochemical/dynamical models.

Bevilacqua, Richard M.↗

Full-scale ground effects of twin impinging jets beneath a subsonic tactical V/STOL aircraft

This paper presents a summary of an analysis of flow field characteristics about a large scale twin-tilt-nacelle V/STOL aircraft in close proximity to the ground. The analysis uses experimental data in the form of measurements of pressure distributions on the ground beneath the aircraft and on the undersurface of the aircraft's fuselage. The integrals of these distributions are compared with forces measured directly, for both the total model and isolated nacelles, (i.e., net thrust). The handling qualities of the vehicle were found to be influenced by flow field characteristic features, not present in simpler models. Lift increases and significant degradation in roll control occur at low heights for fuselage strake deflections of 30 degrees or more. Reductions in control effectiveness about the other axes were also observed.

Dudley, Michael R.↗

Maximizing Ion Transmission in Differential Mobility Spectrometry

We provide modeling and experimental data describing the dominant ion-loss mechanisms for differential mobility spectrometry (DMS). Ion motion is considered from the inlet region of the mobility analyzer to the DMS exit, and losses resulting from diffusion to electrode surfaces, insufficient effective gap, ion fragmentation, and fringing field effects are considered for a commercial DMS system with 1-mm gap height. It is shown that losses due to diffusion and radial oscillations can be minimized with careful consideration of residence time, electrode spacing, gas flow rate, and waveform frequency. Fragmentation effects can be minimized by limitation of the separation field. When these parameters were optimized, fringing field effects at the DMS inlet contributed the most to signal reduction. We also describe a new DMS cell configuration that improves the gas dynamics at the mobility cell inlet. The new cell provides a gas jet that decreases the residence time for ions within the fringing field region, resulting in at least twofold increase in ion signal as determined by experimental data and simulations. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization of wind speed and directional shear at the AWAKEN field campaign site

The American wake experiment (AWAKEN) is taking place in northern Oklahoma, USA, close to the Atmospheric Radiation Measurement Southern Great Plains (ARM SGP) atmospheric observatory. The planning for the deployment of the instruments in this observational field campaign required an assessment of the wind characteristics of the site. This paper analyzes long-term data collected by instruments at the ARM SGP observatory to characterize the winds near the AWAKEN site. The analysis shows that this site experiences high wind shear and veer events with a large number of nocturnal low-level jets. A total of 7086 low-level jet wind profiles over 6 years are examined and found to be dominant from the south and southeast. Significant nocturnal wind veer is observed, which causes southerly wind near the surface to become westerly wind aloft. By identifying a strong relationship between atmospheric stability and wind shear, the wind shear at the site is predicted using the Monin–Obukhov similarity theory (MOST) and validated with the observational data collected by a scanning Doppler lidar. The results show that wind speed at a height of 91 m, a proxy hub height for wind turbines in this area, can be predicted from data collected at a height of 10 m with a bias of −0.35 and 0.65 m s−1 in unstable and stable atmospheric boundary layers, respectively. The bias of the predicted wind speed is mostly in the region of low wind speed, and wind speed above 5 m s−1 at a height of 91 m can be predicted with a bias of less than 0.2 m s−1, and the limitations of the MOST in predicting winds during the stably stratified boundary layer is well-observed.

17 WIND ENERGY↗

Scaling laws in high-energy inverse compton scattering. II. Effect of bulk motions

We study the inverse Compton scattering of the CMB photons off high-energy nonthermal electrons. We extend the formalism obtained by the previous paper to the case where the electrons have nonzero bulk motions with respect to the CMB frame. Assuming the power-law electron distribution, we find the same scaling law for the probability distribution function P{sub 1,K}(s) as P{sub 1}(s) which corresponds to the zero bulk motions, where the peak height and peak position depend only on the power-index parameter. We solved the rate equation analytically. It is found that the spectral intensity function also has the same scaling law. The effect of the bulk motions to the spectral intensity function is found to be small. The present study will be applicable to the analysis of the x-ray and gamma-ray emission models from various astrophysical objects with nonzero bulk motions such as radio galaxies and astrophysical jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Groundboard Height on the Aerodynamic Characteristics of a Lifting Circular Cylinder Using Tangential Blowing from Surface Slots for Lift Generation

A wind-tunnel investigation has been made to determine the ground effect on the aerodynamic characteristics of a lifting circular cylinder using tangential blowing from surface slots to generate high lift coefficients. The tests were made on a semispan model having a length 4 times the cylinder diameter and an end plate of 2.5 diameters. The tests were made at low speeds at a Reynolds number of approximately 290,000, over a range of momentum coefficients from 0.14 to 4.60, and over a range of groundboard heights from 1.5 to 10 cylinder diameters. The investigation showed an earlier stall angle and a large loss of lift coefficient as the groundboard was brought close to the cylinder when large lift coefficients were being generated. For example, at a momentum coefficient of 4.60 the maximum lift coefficient was reduced from a value of 20.3 at a groundboard height of 10 cylinder diameters to a value of 8.7 at a groundboard height of 1.5 cylinder diameters. In contrast to this there was little effect on the lift characteristics of changes in groundboard height when lift coefficients of about 4.5 were being generated. At a height of 1.5 cylinder diameters the drag coefficients generally increased rapidly when the slot position angle for maximum lift was exceeded. Slightly below the slot position angle for maximum lift, the groundboard had a beneficial effect, that is, the drag for a given lift was less near the groundboard than away from the groundboard. The variation of maximum circulation lift coefficient (maximum lift coefficient minus momentum coefficient) obtained in this investigation is in general agreement with a theory developed for a jet-flap wing which assumes that the loss in circulation is the result of blockage of the main stream beneath the wing.

Lockwood, Vernard E.↗

Geometric Form of Gating System Elements and Its Influence on the Initial Filling Phase

Flow of cast steel through twenty-four variants of gating system was examined with the use of numerical modeling conducted in MAGMA. The main goal of the research was to determine the impact of the gating system elements’ geometric form on the kinetics in the initial filling phase, which is crucial in terms of castings quality. The evaluation was based on flow kinetics, maximal height, and the velocity of metal entering the mold. The variables included the geometric form of the sprue and the cross runner, as well as geometric form, length, and expansion of the ingate. Results allow to form valuable conclusions that can lead to improvement in the castings manufacturing technology. Results show that application of proper expansion of the ingate and suitable geometric form of the gating system can significantly reduce the velocity of metal entering the mold cavity, as well as eradicate the jetting, which positively impacts the soundness of the casting.

36 MATERIALS SCIENCE↗

Recent observations on the structure of an edge-tone flow field

An experimental investigation of the flow field generated with a subsonic air jet (M = 0.18-0.8) issuing from a rectangular nozzle having a top hat mean exit velocity profile impinging on a 20 deg wedge has been carried out. The interaction of the jet with an edge involves formation of primary vorticies in the shear layer surrounding the jet and secondary vorticies near the tip of the wedge. These vorticies form vortex pairs and eventually merge to form a single large vortex, and moves downstream along the surface of the wedge. Phase averaged flow survey measurements also depict the counter-rotating vortex pair moving along the surface of the wedge. The instantaneous pressure distribution on the surface of the wedge shows that the unsteady pressure remains zero at the leading edge for the entire motion cycle. For a given edge height, the narrow band spectrum of the near field pressure signals indicate the simultaneous existence of several frequencies, which are not harmonically related.

Krothapalli, A.↗

Global and pedestal confinement and pedestal structure in dimensionless collisionality scans of low-triangularity H-mode plasmas in JET-ILW

A dimensionless collisionality scan in low-triangularity plasmas in the Joint European Torus with the ITER-like wall (JET-ILW) has been performed. The increase of the normalized energy confinement (defined as the ratio between thermal energy confinement and Bohm confinement time) with decreasing collisionality is observed. Moreover, at low collisionality, a confinement factor H98, comparable to JET-C, is achieved. At high collisionality, the low normalized confinement is related to a degraded pedestal stability and a reduction in the density-profile peaking.The increase of normalized energy confinement is due to both an increase in the pedestal and in the core regions. The improvement in the pedestal is related to the increase of the stability. The improvement in the core is driven by (i) the core temperature increase via the temperature-profile stiffness and by (ii) the density-peaking increase driven by the low collisionality.Pedestal stability analysis performed with the ELITE (edge-localized instabilities in tokamak equilibria) code has a reasonable qualitative agreement with the experimental results. An improvement of the pedestal stability with decreasing collisionality is observed. The improvement is ascribed to the reduction of the pedestal width, the increase of the bootstrap current and the reduction of the relative shift between the positions of the pedestal density and pedestal temperature.The EPED1 model predictions for the pedestal pressure height are qualitatively well correlated with the experimental results. Quantitatively, EPED1 overestimates the experimental pressure by 15–35%. In terms of the pedestal width, a correct agreement (within 10–15%) between the EPED1 and the experimental width is found at low collisionality. The experimental pedestal width increases with collisionality. Nonetheless, an extrapolation to low-collisionality values suggests that the width predictions from the KBM constraint are reasonable for ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Northern Hemisphere Blocking in ~25-km-Resolution E3SM v0.3 Atmosphere-Land Simulations

The fidelity of a prerelease Energy Exascale Earth System Model (E3SM) in reproducing atmospheric blocking is evaluated with ~100- and ~25-km horizontal resolution within ensembles of simulations with Atmospheric Modeling Intercomparison Protocol-type active atmosphere and land surface configurations. Here this evaluation is conducted via a hybrid bidimensional blocking index based on geopotential height. The lower-resolution model correctly reproduces the spatial distribution of blocking frequency maxima over the Northern Hemisphere. However, it overestimates the blocking frequency over western North America, the Pacific Northeast, and Eastern Europe regions and largely underestimates blocking frequency over the North Atlantic. The high-resolution model significantly reduces the bias over the North Pacific region, particularly over western North America, but the biases over the North Atlantic blocking sector mostly persist. A diagnosis of the mean flow reveals that the subtropical jet is displaced poleward in the high-resolution model with a jet core speed that is generally more realistic. A time scale analysis of eddies suggests that synoptic eddies associated with the blocking events are increased in the high-resolution configuration. The discrepancy between the models implies that both synoptic and low-frequency eddies play significant roles in determining North Pacific blocking, whereas North Atlantic blocking is mainly driven by low-frequency eddies. The characteristic time scale associated with blocking events is also investigated, and it shows that both model resolutions produce events that are overly persistent. However, the bias in the high-resolution model is reduced, which reflects more efficient energy dispersion with higher resolution.

54 ENVIRONMENTAL SCIENCES↗

Polarimetric thermal emission from periodic water surfaces

Experimental results and theoretical calculations are presented to study the polarimetric emission from water surfaces with directional features. For our ground-based Ku-band radiometer measurements, a water pool was constructed on the roof of a building in the Jet Propulsion Laboratory, and a fiberglass surface with periodic corrugations in one direction was impressed on the top of the water surface to create a stationary water surface underneath it. It is observed that the measured Stokes parameters of corrugated fiberglass-covered water surfaces are functions of azimuth angles and agree very well with the theoretical calculations. The theory, after being verified by the experimental data, was then used to calculate the Stokes parameters of periodic surfaces without fiberglass surface layer and with rms height of the order of wind-generated water ripples. The magnitudes of the azimuthal variation of the calculated emissivities at horizontal and vertical polarizations corresponding to the first two Stokes parameters are found to be comparable to the values measured by airborne radiometers and SSM/I. In addition, the third Stokes parameter not shown in the literature is seen to have approximately twice the magnitude of the azimuth variation of either T(sub h) or T(sub v), which may make it more sensitive to the row direction, while less susceptive to noises because the atmospheric and system noises tend to be unpolarized and are expected to be cancelled out when the third Stokes parameter is derived as the difference of two or three power measurements, as indicated by another experiment carried out at a swimming pool with complicated surroundings. The results indicate that passive polarimetry is a potential technology in the remote sensing of ocean wind vector which is a crucial component in the understanding of global climate change. Issues related to the application of microwave passive polarimetry to ocean wind are also discussed.

Yueh, S. H.↗

A two-dimensional potential flow model for ground-induced effects on jet and fan inlets

A free-streamline potential flow model is developed for the flowfield external to a stationary jet or fan inlet in proximity to a ground plane. It is assumed that the flow is steady, incompressible, and irrotational. A two-dimensional flat plate geometry models the inlet configuration, and free streamline theory is used to avoid unrealistic infinite flow velocities at the lips of the inlet, and to account somewhat for flow separation. A water table experiment is used to verify the analytical results. The fact that the solutions are found to be limited to only a certain range of diameter-height ratios implies an overdetermination of the problem by free streamline theory. Also studied are the convective properties of small vortical disturbances superimposed on the ideal flow solution.

Newman, W. H.↗

Fusion of AIRSAR and TM Data for Parameter Classification and Estimation in Dense and Hilly Forests

The expanded remotely sensed data space consisting of coincident radar backscatter and optical reflectance data provides for a more complete description of the Earth surface. This is especially useful where many parameters are needed to describe a certain scene, such as in the presence of dense and complex-structured vegetation or where there is considerable underlying topography. The goal of this paper is to use a combination of radar and optical data to develop a methodology for parameter classification for dense and hilly forests, and further, class-specific parameter estimation. The area to be used in this study is the H. J. Andrews Forest in Oregon, one of the Long-Term Ecological Research (LTER) sites in the US. This area consists of various dense old-growth conifer stands, and contains significant topographic relief. The Andrews forest has been the subject of many ecological studies over several decades, resulting in an abundance of ground measurements. Recently, biomass and leaf-area index (LAI) values for approximately 30 reference stands have also become available which span a large range of those parameters. The remote sensing data types to be used are the C-, L-, and P-band polarimetric radar data from the JPL airborne SAR (AIRSAR), the C-band single-polarization data from the JPL topographic SAR (TOPSAR), and the Thematic Mapper (TM) data from Landsat, all acquired in late April 1998. The total number of useful independent data channels from the AIRSAR is 15 (three frequencies, each with three unique polarizations and amplitude and phase of the like-polarized correlation), from the TOPSAR is 2 (amplitude and phase of the interferometric correlation), and from the TM is 6 (the thermal band is not used). The range pixel spacing of the AIRSAR is 3.3m for C- and L-bands and 6.6m for P-band. The TOPSAR pixel spacing is 10m, and the TM pixel size is 30m. To achieve parameter classification, first a number of parameters are defined which are of interest to ecologists for forest process modeling. These parameters include total biomass, leaf biomass, LAI, and tree height. The remote sensing data from radar and TM are used to formulate a multivariate analysis problem given the ground measurements of the parameters. Each class of each parameter is defined by a probability density function (pdf), the spread of which defines the range of that class. High classification accuracy results from situations in which little overlap occurs between pdfs. Classification results provide the basis for the future work of class-specific parameter estimation using radar and optical data. This work was performed in part by the Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, and in part by the NASA Ames Research Center, Moffett Field, CA, both under contract from the National Aeronautics and Space Administration.

Moghaddam, Mahta↗

Test results of modified electrical charged particle generator for application to fog dispersal

Modifications to a charged particle generator for use in fog dispersal applications were made and additional testing carried out. The modified nozzle, however, did not work as planned, and reported results are the unmodified nozzle. The addition of a positive displacement pump to supply the liquid water was highly successful. Measurements of the generator output current were made with a cylindrical collector system as well as with the needle probe used in previous studies. Measurements with the cylindrical collector and the needle probe showed identical agreement within the variability of the experiment. A high-voltage prove was purchased, and measurements of the corona voltage as well as the voltage variation in the charged particle jet were made. Electric fields in the vertical direction on the order of 1,000,000 v/m were measured. The voltage distribution along the centerline of the jet was compared with the numerical solutions of the Poisson equation and showed very good agreement. Velocity measurements using a pitot tube were made. The resulting measurements were compared with theoretical and other reported experimental results. The measured data showed the appropriate trends and agreed well with reported results. Based on the measured current-to-mass ratio from the charged particle generator, a calculation of the average droplet size was made. Droplet sizes were estimated to range between 0.8 and 0.4 microns. Using measured data, an analysis of the height to which the droplet can be dispersed by the charged particle generator was made. Although the mathematical model is highly simplified, the results indicated that particles would achieve heights on the order of 80 m.

Frost, W.↗