Direct Observation of Quantum Anomalous Vortex in Fe(Se,Te)
Not Available
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
SEARCH · Engineering Papers
Results for “iron based”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Final Technical Report for DE-FG02-86ER45268
This work addresses several key issues for understanding the unusual superconductivity in IBS, already shown to be technologically useful materials. 1a). Are reactive gasses like fluorine, chlorine, or water vapor behaving simply as electron donors to cause the superconductivity (at T conset =21 K) in undoped IBS like BaFe 2 As 2 ? 1b). Does exposure to fluorine increase T c in electron-doped IBS materials that are underdoped, e. g. Ba(Fe 0.96 Co 0.04 ) 2 As 2 ? 1c). Can fluorine as a reactive electron-donor, with its relatively greater ease of introduction into the lattice, be used as a rapid tool to search for superconductivity in new materials under investigation? Method of investigation: Using electron probe microanalysis, x-ray photoemission spectroscopy, and dynamical mean field theory calculations, we found that fluorine substitutes for As in the BaFe 2 As 2 lattice, and should therefore behave as an electron donor. We will F-dope Ba(Fe 0.96 Co 0.04 ) 2 As 2 and several new compounds under investigation for superconductivity upon doping to determine fluorine’s effect. Potential impact: If – like for fluorine - a brief exposure to hydrogen indeed causes superconductivity to a depth of 10 microns, this technique could be useful in creating long lengths of superconducting tape without the chemical aggressiveness of fluorine. Using the F ion, which substitutes for As - away from the Fe planes, in underdoped IBS like Ba(Fe 0.96 Co 0.04 ) 2 As 2 may form optimally doped IBS with less impurity scattering of the superconducting Fe 3d electrons resulting in improved superconducting properties. Another potential impact is the speed of checking for superconductivity in new materials under investigation for superconductivity upon doping. 2. What are the effects of Be substitution into IBS, beginning with FeSe and its derivatives (FeSe 1-x S x and FeSe 1-x Te x ) and BaFe 2-x Co x As 2 ? Method of investigation: We recently succeeded in adding Be to the FeSe lattice and found, surprisingly, a factor of four improvement of the low temperature residual resistivity ratio, consistent with improved electronic ordering. Using single crystal x-ray diffraction and x-ray dispersive spectroscopy, determine the concentration and location of the Be dopant. Using resistivity, determine if there is improvement in the residual resistivity achieved by Be doping in the FeSe derivatives (using AlCl 3 :KCl flux growth) and Co-doped BaFe 2 As 2 (using self-flux single crystal growth). Measuring resistivity under strain, determine the changes of the nematic susceptibility at the structural ordering transition causes by the increase in electronic order caused by Be doping in FeSe. Potential impact: Further understanding of IBS, including FeSe which - under physical pressure - has a T c increase to 40 K and -prepared as a monolayer - has a T c reported to be over 100 K. 3. In collaboration, prepare light atom compounds involving Be and look for high pressure-induced superconductivity.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
FY24 LLNL Laboratory Directed Research and Development (LDRD) Project Accomplishments
Large duration energy storage is the key to couple renewable energy generation with power supply. This project aimed to advance the durability of a low-cost and eco-friendly flow battery technology based on iron chemistry to speed up the technology readiness level rapidly and radically. A novel device which is called “an artificial kidney” was innovated through disruptive research to integrate with the flow battery for rebalancing capacity. Key results at 50 cm2 scale demonstrates that artificial kidney enabled retaining the storage capacity of the flow battery over 100 cycles. Comparison of outcome of this work showing 0% capacity degradation to the state-of-the-art technology corroborates that this novel system is a game changing innovation.
99 GENERAL AND MISCELLANEOUS↗
Effect of Controlled Artificial Disorder on the Magnetic Properties of EuFe 2 (As 1– x P x ) 2 Ferromagnetic Superconductor
Static (DC) and dynamic (AC, at 14 MHz and 8 GHz) magnetic susceptibilities of single crystals of a ferromagnetic superconductor, EuFe 2 ( As 1 – x P x ) 2 ( x = 0.23), were measured in pristine state and after different doses of 2.5 MeV electron or 3.5 MeV proton irradiation. The superconducting transition temperature, T c ( H ) , shows an extraordinarily large decrease. It starts at T c ( H = 0 ) ≈ 24 K in the pristine sample for both AC and DC measurements, but moves to almost half of that value after moderate irradiation dose. Remarkably, after the irradiation not only T c moves significantly below the FM transition, its values differ drastically for measurements at different frequencies, ≈16 K in AC measurements and ≈12 K in a DC regime. We attribute such a large difference in T c to the appearance of the spontaneous internal magnetic field below the FM transition, so that the superconductivity develops directly into the mixed spontaneous vortex-antivortex state where the onset of diamagnetism is known to be frequency-dependent. We also examined the response to the applied DC magnetic fields and studied the annealing of irradiated samples, which almost completely restores the superconducting transition. Overall, our results suggest that in EuFe 2 ( As 1 – x P x ) 2 superconductivity is affected by local-moment ferromagnetism mostly via the spontaneous internal magnetic fields induced by the FM subsystem. Another mechanism is revealed upon irradiation where magnetic defects created in ordered Eu 2 + lattice act as efficient pairbreakers leading to a significant T c reduction upon irradiation compared to other 122 compounds. On the other hand, the exchange interactions seem to be weakly screened by the superconducting phase leading to a modest increase of T m (less than 1 K) after the irradiation drives T c to below T m . Our results suggest that FM and SC phases coexist microscopically in the same volume.
36 MATERIALS SCIENCE↗
The end of the iron-core age.
The terrestrial planets aggregated essentially from small particles, to begin as solid cool bodies with the same general compositions, and there is no possibility of an iron-core developing within any of them at any stage. Their differing internal and surface properties receive ready explanation from their different masses which determine whether the pressures within are sufficient to bring about phase-changes. The claim that the terrestrial core can be identified by means of shock-wave data as nickel-iron is based on theoretical misconception, whereas the actual seismic data establish an uncompressed-density value much lower than any such mixture could have. The onset of the Ramsey phase-change in the earth takes the form of a rapid initial collapse to produce a large core in metallic state which thereafter continues to grow secularly as a result of radioactive heating and leads to reduction of surface-area at long last adequate to account for folded and thrusted mountain-building.
Lyttleton, R. A.↗
ASRDI oxygen technology survey, Volume 7: Characteristics of metals that influence system safety
A literature survey and analysis of the material and process factors affecting the safety of metals in oxygen systems is presented. In addition, the practices of those who specify, build, or use oxygen systems relative to the previous is summarized. Alloys based on iron, copper, nickel, and aluminum were investigated representing the bulk of metals found in oxygen systems. Safety-related characteristics of other miscellaneous metals are summarized. It was found that factors affecting the safety of metals in oxygen systems exit in all phases of the evolutionary process, from smelting and mill techniques through end-production fabrication. The safety of a given metal in an oxygen system was determined to be influenced by the particular service requirement. The metal characteristics should favorably influence fulfillment of these requirements. Thus, no singular metal or alloy could be classified as safest for all types of oxygen service.
Pelouch, J. J., Jr.↗
Ferromagnetic-superparamagnetic granulometry of lunar surface materials
A technique of magnetic granulometry is applied to previously reported data for the temperature dependence of isothermal remanent magnetization (IRM) in 13 lunar surface samples, including three soils. Observed increases in IRM with decreasing temperature are attributed to changes from superparamagnetic to single-domain types of behavior for fine metallic-iron particles. Based on this hypothesis, the temperature dependence of IRM in the examined samples is analyzed to obtain particle-size distributions over the range of mean diameters from 30 to 130 A. It is found that the distribution functions for the soils and a low-grade breccia vary as the inverse square of particle volume and that the distributions for recrystallized breccias and igneous rocks apparently peak about mean values.
Schwerer, F. C.↗
Preparation and characterization of electrodes for the NASA Redox storage system
Electrodes for the Redox energy storage system based on iron and chromium chloride reactants is discussed. The physical properties of several lots of felt were determined. Procedures were developed for evaluating electrode performance in lab scale cells. Experimental procedures for evaluating electrodes by cyclic voltammetry are described which minimize the IR losses due to the high internal resistance in the felt (distributed resistance). Methods to prepare electrodes which reduced the coevolution of hydrogen at the chromium electrode and eleminate the drop in voltage on discharge occasionally seen with previous electrodes were discussed. Single cells of 0.3329 ft area with improved membranes and electrodes are operating at over 80% voltage efficiency and coulombic efficiencies of over 98% at current densities of 16 to 20 amp % ft.
Reid, M. A.↗
Evaluation of candidate Stirling engine heater tube alloys after 3500 hours exposure to high pressure doped hydrogen or helium
The heater head tubes of current prototype automotive Stirling engines are fabricated from alloy N-155, an alloy which contains 20 percent cobalt. Because the United States imports over 90 percent of the cobalt used in this country and resource supplies could not meet the demand imposed by automotive applications of cobalt in the heater head (tubes plus cylinders and regenerator housings), it is imperative that substitute alloys free of cobalt be identified. The research described herein focused on the heater head tubes. Sixteen alloys (15 potential substitutes plus the 20 percent Co N-155 alloy) were evaluated in the form of thin wall tubing in the NASA Lewis Research Center Stirling simulator materials diesel fuel fired test rigs. Tubes filled with either hydrogen doped with 1 percent CO2 or with helium at a gas pressure of 15 MPa and a temperature of 820 C were cyclic endurance tested for times up to 3500 hr. Results showed that two iron-nickel base superalloys, CG-27 and Pyromet 901 survived the 3500 hr endurance test. The remaining alloys failed by creep-rupture at times less than 3000 hr, however, several other alloys had superior lives to N-155. Results further showed that doping the hydrogen working fluid with 1 vol % CO2 is an effective means of reducing hydrogen permeability through all the alloy tubes investigated.
Misencik, J. A.↗
Type NASA-23
NASA-23 alloy has been designed to fulfil NASA's unique need for a high strength, oxidation-and corrosion resistant alloy that is compatible with a high-pressure hydrogen environment. This alloy is a precipitation hardened iron-nickel base alloy with excellent strength and ductility art gaseous hydrogen (GH2), comparable to those of other alloys in its class, Inconel 718 and IN-903. NASA-23 has been designed with a sufficient amount of chromium to provide good corrosion/oxidation resistance. For hydrogen resistance, the alloy maintains a (Ni + Co)/Fe ratio close to 1.26, the same as that of Incoloy 903. Hardening constituents, Nb, Ti, and Al, are optimized for strength and ductility both in air and GH2 atmospheres.
Binayak, Panda↗
X-ray Amorphous and Poorly Crystalline Fe-Containing Phases in Terrestrial Field Environments and Implications for Materials Detected on Mars
Recent analyses of X-ray diffraction (XRD) data from the CheMin instrument using the FULLPAT program have documented the presence of X-ray amorphous materials at multiple sites within Gale Crater, Mars. These materials are believed to be to be iron-rich based on chemical data, and at least some of them are believed to be weathering products based on volatile contents. However, the characteristics of these proposed Fe-rich weathering products remain poorly understood. To better understand these X-ray amorphous materials on Mars, we are 1) examining weathering products formed on Fe-rich parent material in terrestrial soils across a range of climatic conditions, and 2) performing burial experiments of Fe- and Mg- rich olivine in these soils. We describe each of these approaches below.
Feldman, A. D.↗
Hot-Fire Testing Results of Additively Manufactured NASA HR-1 towards Large Scale Implementation of Channel Wall Nozzles
Additive manufacturing (AM) has provided new design and manufacturing opportunities to reduce cost and schedules, consolidate parts, and optimize performance. One technique being evaluated is Laser Powder Directed Energy Deposition (LP-DED), which provides a significant increase in scale compared to Laser Powder Bed Fusion (L-PBF). NASA along with industry partners have been developing the LP-DED process to demonstrate internal channel geometry and development components for use in liquid rocket engine channel cooled nozzles. One material that has been the focus of this development is NASA HR-1, an Iron-Nickel based superalloy optimized for use in high pressure hydrogen environments. Material properties and process characterization has been completed on the high density thin-wall material in addition to advancements of the supply chain. NASA has also completed fabrication of several subscale and full scale channel wall nozzles in LP-DED NASA HR-1 and completed hot-fire testing. This includes refinement of the process to produce thin-walls and various channel geometries to meet the requirements for channel wall nozzle applications. This paper will provide an overview of the LP-DED process development, material characterization and properties, component manufacturing, and hot-fire testing. Hot-fire testing was completed for a lander-class 7K-lbf thrust chamber using Liquid Oxygen (LOX)/Methane. The design overview and results from hot-fire testing will be presented in addition to hardware development for future testing on 2K-lbf and 35k-lbf thrust chambers and large-scale manufacturing technology demonstrators.
Paul Gradl↗
Bonding to Bulk Metallic Glass using Aerospace-Grade Structural Adhesive
Bulk metallic glasses (BMGs) are non-crystalline metals with growing applications in aerospace. Due to their amorphous nature, BMGs generally exhibit stronger mechanical properties than most crystalline alloys and are more corrosion resistant. The limited reactivity of a corrosion resistant surface may explain the difficulty in establishing robust bonds to certain adhesives, especially commonly used structural adhesives for aerospace applications. Here, an amine cured aerospace adhesive was used for bonding an iron-nickel based BMG satellite component. Various types of processes were explored to avoid adhesive failure and increase bond strength. It was found that the BMG required specific chemical derivatization of the metal surface in order to achieve cohesive failure. Surface analysis was used to determine the mechanisms of adhesion enhancement. The process was optimized to maximize bond strength. This work helps explain the difficulties in bonding BMG materials and provides strategies for design of future bonded BMG components.
Roberts, Rose↗
Two-State Reactivity in Iron-Catalyzed Alkene Isomerization Confers σ-Base Resistance
A low-coordinate, high spin (S = 3/2) organometallic iron(I) complex is a catalyst for the isomerization of alkenes. A combination of experimental and computational mechanistic studies supports a mechanism in which alkene isomerization occurs by the allyl mechanism. Importantly, while substrate binding occurs on the S = 3/2 surface, oxidative addition to an η 1 -allyl intermediate only occurs on the S = 1/2 surface. In conclusion, since this spin state change is only possible when the alkene substrate is bound, the catalyst has high immunity to typical σ-base poisons due to the antibonding interactions of the high spin state.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A Simplified Approach Based on Cellular Automata for Describing Direct Reduced Iron Production in Different Reducing Conditions
A quick computation approach based on cellular automata is developed and implemented to describe the reduction of iron ore pellets by a mixture of reducing agents featured by different H 2 /CO ratios. The evolution of oxygen concentration inside the pellet is followed from the beginning to the end of contact between reducing agent and pellet. The variation of thermal state of pellets and gas mixture is computed based on their initial temperature, considering the heat involved and the convective heat exchange between pellet and gas mixture. The use of cellular automata and finite‐difference method to solve the diffusion equation point out the absence of any diffusion coefficient value, allowing to make the model fit the experimental trial, because the problem is that it is not ruled just by diffusion but also by the concentration variation of reducing agent inside the pellet due to porosity increasing during reduction. The updating of the reducing agents concentration implies a sharp decrease of oxygen concentration that the cellular automata model considers. The developed model is able to provide the in‐line control of reduction process and could be used to adjust the chemical concentration and temperature of injected reducing agents.
Metallurgy & Metallurgical Engineering↗
Effect of Silicon and Iron Content on Embrittlement of a Cobalt-base Alloy /L-605/
Embrittlement of cobalt-base alloy due to silicon and iron content
SILICON↗
Electrochemical Utilization of Iron IV in the Li 1.3 Fe 0.4 Nb 0.3 O 2 Disordered Rocksalt Cathode
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Hydrotrope-enabled high concentration aqueous electrolytes for reversible and sustainable iron metal anodes
Iron metal-based energy storage devices hold great potential in stationary grid-scale sustainable energy due to the high theoretical specific capacity, ultralow cost, and abundance of iron. However, their practical deployment is limited by the poor reversibility of iron plating and stripping, as well as competitive hydrogen evolution. Here we introduce the concept of hydrotropy into iron electrolytes by developing an environmentally friendly and cost-effective high-concentration ferrous sulfate electrolyte using urea as a hydrotropic agent. The designed electrolyte increases the Coulombic efficiency of iron metal electrodes to approximately 96.5%, compared with ~84.6% for the dilute electrolyte. Molecular dynamics simulations and Raman spectroscopy illustrate that urea regulates the competitive coordination of anions and urea in the iron solvation sheath, while reconstructing the hydrogen-bond network in free water molecules. This reduces the activity of both solvated and free water, thereby alleviating hydrogen evolution. Moreover, the coordinated anions and urea molecules facilitate the in-situ formation of an organic-inorganic hybrid protective layer on the metallic iron, establishing a physical barrier against water and promoting homogeneous interfacial reactions. This work demonstrates an appealing opportunity to design cost-effective and high-performance electrolytes and propels the practical application of iron metal-based energy storage devices.
Feng, Guangxia [Stanford Univ., CA (United States)↗