Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Electro-osmo-dialysis through nanoporous layers physically conjugated to micro-perforated ion-exchange membranes: Highly selective accumulation of trace coions

This study explores theoretically and numerically the phenomenon of counter-flow accumulation of trace coions during electro-osmo-dialysis through composite membranes containing nanoporous and perforated ion-exchange layers. The combination of charged nanopores and perforations allows electroosmosis, and ion concentration polarization appears near the ion-exchange layer. Accumulation of trace coions occurs because their advective and electromigration flow velocity components have opposite signs and are locally compensating in depletion regions where electric fields are high. This local compensation of flow components can give rise to high accumulation factors (>1000 in some cases) for trace coions at some distance from the interface between the nanoporous and ion-exchange layers. Moreover, the extent of this accumulation depends on the trace-coion diffusion coefficient. The resulting selectivity between different coions might serve as a basis for environmentally friendly separation of ionic species such as synthetic peptides or rare-earth elements. For example, a periodic process might include accumulation followed by species release into smaller volumes of solution. For both rare-earth ions and peptide-like species, the accumulation selectivity between ions with small differences in mobilities depends on system parameters such as nanoporous-layer thickness, distance between the perforations, and the zeta potential of the nanopore surface. Here, the use of optimal values of these membrane parameters may enable tuning of the electro-osmo-dialysis system for separation of specific ions. Modelling reveals that despite inhomogeneous patterns of fluid and ion flows close to the nanoporous/perforated ion-exchange interface, at relatively short distances from this interface (less than half the distance between the perforations) all the flows become practically one-dimensional (1D). Similarly, the concentration profiles of trace coions also become 1D. The flow one-dimensionality at short distances from the current-polarized interface enables a simple 1D approximation that is useful for an approximate analysis of trends in this multi-parameter system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Equilibrium solute segregation to matrix- θ' precipitate interfaces in Al-Cu alloys from first principles

Particular combinations of solute atoms segregated to the interface of the Al and θ ' - Al 2 Cu in Al-Cu alloys can help stabilize θ ' precipitates at high temperatures. Stabilization of such precipitates is determined by a combination of thermodynamics (including driving forces for coarsening and transformation and solute segregation tendencies) and kinetic effects (including solute diffusion and interfacial mobility in the presence of interfacial solute segregation). For some alloys such as recent Al-Cu-based alloys, multiple solutes segregate in significant quantities to interfaces, and solute-solute interactions at the interface are important, with multiple types of solutes competing for similar interfacial sites. To treat this situation, we develop and apply a statistical mechanics approach to calculate the temperature-dependent equilibrium solute atoms distribution near the coherent and semicoherent interfaces between the Al matrix and the θ ' - Al 2 Cu precipitates. The developed approach is applied to the investigation of Si, Mn, and Zr segregation at the interface, as particular combinations of these elements affect the thermal stability of the θ ' precipitates. We demonstrate that because Si and Mn atoms segregate on the same semicoherent interface, the presence of Si reduces the concentration of Mn solutes at the interface. Si atoms preferably occupy the first layer of the interface and compete with Mn atoms for one type of particular sites in the layer. Mn atoms preferably occupy the second layer of the semicoherent interface, and the Mn-Mn interaction plays an important role in their distribution. Zr atoms mostly segregate on one of the two nonequivalent sites of the second layer of the coherent interface. Due to symmetry properties of the coherent interface, the calculations show that the segregation Zr of atoms to this interface will likely lead to the formation of L 1 2 ordered Al 3 Zr layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

A new approach for simulating inhomogeneous chemical kinetics

Abstract In this paper, inhomogeneous chemical kinetics are simulated by describing the concentrations of interacting chemical species by a linear expansion of basis functions in such a manner that the coupled reaction and diffusion processes are propagated through time efficiently by tailor-made numerical methods. The approach is illustrated through modelling $$\alpha$$ α - and $$\gamma$$ γ -radiolysis in thin layers of water and at their solid interfaces from the start of the chemical phase until equilibrium was established. The method’s efficiency is such that hundreds of such systems can be modelled in a few hours using a single core of a typical laptop, allowing the investigation of the effects of the underlying parameter space. Illustrative calculations showing the effects of changing dose-rate and water-layer thickness are presented. Other simulations are presented which show the approach’s capability to solve problems with spherical symmetry (an approximation to an isolated radiolytic spur), where the hollowing out of an initial Gaussian distribution is observed, in line with previous calculations. These illustrative simulations show the generality and the computational efficiency of this approach to solving reaction-diffusion problems. Furthermore, these example simulations illustrate the method’s suitability for simulating solid-fluid interfaces, which have received a lot of experimental attention in contrast to the lack of computational studies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Crosslinked Polyethyleneimine Gel Polymer Interface to Improve Cycling Stability of RFBs

Redox flow batteries are considered a promising technology for grid energy storage. However, capacity decay caused by crossover of active materials is a universal challenge for many flow battery systems, which are based on various chemistries. In this paper, using the vanadium redox flow battery as an example, we demonstrate a new gel polymer interface (GPI) consisting of crosslinked polyethyleneimine with a large amount of amino and carboxylic acid groups introduced between the positive electrode and the membrane. The GPI functions as a key component to prevent vanadium ions from crossing the membrane, thus supporting stable long-term cycling. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were conducted to investigate the effect of GPI on the electrochemical properties of graphitic carbon electrodes (GCFs) and redox reaction of catholyte. X-ray photoelectron spectroscopy (XPS) and 1 H nuclear magnetic resonance (NMR) spectra demonstrated that the crosslinked GPI is chemically stable for 100 cycles without dissolution of polymers and swelling in the strong acidic electrolytes. Results from inductively coupled plasma mass spectrometry (ICP-MS), Fourier-transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray (EDX) spectroscopy proved that the GPI is effective in maintaining the concentration of vanadium species in their respective half-cells, resulting in improved cycling stability because of it prevents active species from crossing the membrane and stabilizes the oxidation states of active species.

Lim, Hyung-Seok↗
DOE OSTI2023

Hybrid Particle Method for Computational Shock Physics

A long-standing area of research for Eulerian shock wave physics codes has been the treatment of strength and damage for materials. Here we present a method that will aid in the analysis of strength and failure in shock physics applications where excessive diffusion of critical variables can occur and control the solution outcome. Eulerian methods excel for large deformation simulations in general but are inaccurate in capturing structural behavior. Lagrangian methods provide better structural response, but finite element meshes can become tangled. Therefore, a technique for merging Lagrangian and Eulerian treatments of material response, within a single numerical framework, was implemented in the Multiple Component computational shock physics hydrocode. The capability is a Lagrangian/Eulerian Particle Method (LEPM) that uses particles to interface a Lagrangian treatment of material strength with a more traditional Eulerian treatment of the Equation of State (EOS). Lagrangian numerical methods avoid the advection diffusion found in Eulerian methods, which typically strongly affects strength constitutive law internal variables, such as equivalent plastic strain, porosity and/or damage. The Lagrangian capability enhances existing capabilities and permits accurate predictions of high rate, large deformation and/or shock of mechanical structures.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Upgrading the Performance and Stability of Lithium, Manganese-Rich Layered Oxide Cathodes with Combined-Formic Acid and Spinel Coating Treatment

We report improving sluggish rate performance and cycling stability of Li, Mn-rich cathode materials (LMR) is of great importance for practical implementation. Here, dual surface modification on LMR particles with formic acid washing and spinel coating improves the electrochemical performance. Dilute formic acid can remove the Li2CO3 surface impurities and selectively reduce Ni while significantly increasing specific surface area by ~32 %, unlocking more electrochemically active surfaces. Spinel coating enhances cycle stability by suppressing detrimental side reactions at electrode-electrolyte interfaces at high voltage. Post-annealing temperature was found to significantly affect the cathode performance. Higher temperature favors diffusion of transition metal (TM)/Li ions of the spinel coating from surface to the bulk, removing the coating by possible reconstruction into the layered structure and thus degrading the performance. The spinel coating also appears to increase Co 3+ segregation on the particle surface. Compared to the original material, the optimized sample demonstrates 47 % higher capacity retention at 3C and retains 89 % of initial capacity after 150 cycles at 0.5C. Besides, the specific energy density of 523 Wh kg -1 can be attained after 150 cycles at 0.5C. Moreover, the post-cycling analysis of modified sample verifies a better structural integrity with less particle cracking. Altogether, this study portrays an alternative strategy to overcome the shortcomings of LMR cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Characterizing pulse reverse-pulse uranium recovery in molten LiCl-KCl with intermittent electrochemical impedance spectroscopy

In this work, EIS was applied to characterize the temporal recovery of uranium from UCl 4 onto a tungsten electrode in molten LiCl-KCl salt between sets of pulse reverse-pulse (PRP) deposition steps. Impedance measurements were fitted to an equivalent circuit (EC) model of the electrode interface using Simplex optimization to calculate the double layer capacitance, charge transfer resistance, Warburg impedance, and CPE-restricted diffusion. Diffusion of uranium towards the electrode surface dominated the surface interactions for the first 80 cycles, followed by a transition to kinetic control for the remaining 520 cycles. A decrease in the Warburg impedance showed depletion of uranium from the bulk melt, which was confirmed to be a 52.5% reduction through ICP-OES. Reduction in the phasance from CPE-restricted diffusion suggested the formation of pores in the uranium deposits, which was confirmed through SEM characterization.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Experimental and modeling study of the effect of confinement on the thermal decomposition of organic materials

Simultaneous Thermal Analysis is widely used to study thermal decomposition of a variety of organic materials, and the choice of experimental conditions is very important to obtain reliable mass loss and heat flow curves. Here in this work we investigate the effect of confinement on the thermal decomposition of organic materials. As an example, we explore high-density polyethylene (HDPE) and one of its pyrolysis products, namely eicosane (C 20 H 42 ), through experiments and modeling in open crucibles and crucibles closed with a pierced lid. A new model is developed for evaporation and sublimation from open and pinhole thermal-analysis pans. It considers the kinetic resistance of evaporation at the liquid-vapor interface, inhibition of evaporation by buildup of vapor inside the pan, thermal expansion of vapor inside the pan, and diffusion of vapor from the pan. The model is validated using simultaneous heat-flow and mass-loss measurements of n-eicosane evaporation for various pinhole sizes, down to 50 µm. The importance of product evaporation inhibition for measuring polymer decomposition was demonstrated using HDPE. This study sheds light on the effect of confinement on the mass loss rate of organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Degradation of Adsorbed Bisphenol A by Soluble Mn(III)

Bisphenol A (BPA), a high production volume chemical and potential endocrine disruptor, is found to be associated with sediments and soils due to its hydrophobicity (log K OW of 3.42). Here, we used superfine powdered activated carbon (SPAC) with a particle size of 1.38 ± 0.03 μm as a BPA sorbent and assessed degradation of BPA by oxidized manganese (Mn) species. SPAC strongly sorbed BPA, and desorption required organic solvents. No degradation of adsorbed BPA (278.7 ± 0.6 mg BPA g –1 SPAC) was observed with synthetic, solid α-MnO 2 with a particle size of 15.41 ± 1.35 μm; however, 89% mass reduction occurred following the addition of 0.5 mM soluble Mn(III). Small-angle neutron scattering data suggested that both adsorption and degradation of BPA occurred in SPAC pores. The findings demonstrate that Mn(III) mediates oxidative transformation of dissolved and adsorbed BPA, the latter observation challenging the paradigm that contaminant desorption and diffusion out of pore structures are required steps for degradation. Soluble Mn(III) is abundant near oxic-anoxic interfaces, and the observation that adsorbed BPA is susceptible to degradation has implications for predicting, and possibly managing, the fate and longevity of BPA in environmental systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Comparative study on the formation of Cr and Ti ohmic contacts to (001) β -Ga 2 O 3

Here, a comparative study of Cr/Au and Ti/Au ohmic contacts on (001) β-Ga 2 O 3 was conducted. The electrical behavior from current-voltage measurements and the interfacial composition and microstructure as determined from high-resolution transmission electron microscopy (TEM) with energy dispersive x-ray analysis were compared for the different contacts at selected points in an annealing series (300–700 °C, 1 min. anneals in N 2 ). Cr/Au contacts became ohmic at temperatures (300–350 °C) approximately 50–100 °C lower than Ti/Au contacts (400–450 °C). Cr/Au and Ti/Au contacts demonstrated optimal ohmic behavior (lowest resistance) when annealed to 450–500 and 500–600 °C, respectively, with Ti/Au contacts yielding a lower total resistance than Cr/Au. Cross-sectional TEM images of Cr/Au contacts annealed at 450 °C revealed the presence of Au nanoclusters at the Ga 2 O 3 interface and CrO x layers at both the top of the contact and the Ga 2 O 3 interface. Whereas TiO x also formed at the top and bottom interfaces in 450 °C-annealed Ti/Au contacts, the TiO x surface layer appeared to be variable in thickness and/or discontinuous, unlike the CrO x surface layer. Au nanoclusters were not detected at the interface in the Ti/Au contacts. The interdiffusion and oxidation observed in both contact metallizations point to the need for diffusion barriers that may allow these contacts to be used in future Ga 2 O 3 -based devices that operate at elevated temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anomalous interfacial dynamics of single proton charges in binary aqueous solutions

Our understanding of the dynamics of charge transfer between solid surfaces and liquid electrolytes has been hampered by the difficulties in obtaining interface, charge, and solvent-specific information at both high spatial and temporal resolution. Here, we measure at the single charge scale the dynamics of protons at the interface between an hBN crystal and binary mixtures of water and organic amphiphilic solvents (alcohols and acetone), evidencing a marked influence of solvation on interfacial dynamics. Applying single-molecule localization microscopy to emissive crystal defects, we observe correlated activation between adjacent ionizable surface defects, mediated by the transport of single excess protons along the solid/liquid interface. Solvent content has a nontrivial effect on interfacial dynamics, leading at intermediate water fraction to an increased surface diffusivity, as well as an increased affinity of the proton charges to the solid surface. Our measurements evidence the notable role of solvation on interfacial proton charge transport.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Resolving experimental biases in the interpretation of diffusion experiments with a user-friendly numerical reactive transport approach

The reactive transport code CrunchClay was used to derive effective diffusion coefficients (D e ), clay porosities (ε), and adsorption distribution coefficients (K D ) from through-diffusion data while considering accurately the influence of unavoidable experimental biases on the estimation of these diffusion parameters. These effects include the presence of filters holding the solid sample in place, the variations in concentration gradients across the diffusion cell due to sampling events, the impact of tubing/dead volumes on the estimation of diffusive fluxes and sample porosity, and the effects of O-ring-filter setups on the delivery of solutions to the clay packing. Doing so, the direct modeling of the measurements of (radio)tracer concentrations in reservoirs is more accurate than that of data converted directly into diffusive fluxes. While the above-mentioned effects have already been described individually in the literature, a consistent modeling approach addressing all these issues at the same time has never been described nor made easily available to the community. A graphical user interface, CrunchEase, was created, which supports the user by automating the creation of input files, the running of simulations, and the extraction and comparison of data and simulation results. While a classical model considering an effective diffusion coefficient, a porosity and a solid/solution distribution coefficient (D e –ε–K D ) may be implemented in any reactive transport code, the development of CrunchEase makes it easy to apply by experimentalists without a background in reactive transport modeling. CrunchEase makes it also possible to transition more easily from a D e –ε–K D modeling approach to a state-of-the-art process-based understanding modeling approach using the full capabilities of CrunchClay, which include surface complexation modeling and a multi-porosity description of the clay packing with charged diffuse layers.

58 GEOSCIENCES↗
DOE OSTI2021

Influence of supplementary cementitious materials on microstructure and transport properties of spacer-concrete interface

Reinforcement spacers are a critical component of concrete structures. Their presence affects microstructure and transport properties of concrete cover though this is not widely appreciated. This paper presents the first study to determine whether the negative effects of spacers can be mitigated through the use of supplementary cementitious materials such as silica fume, fly ash and blast-furnace slag. Concrete samples (>200) with different spacers, binders, curing and drying regimes were prepared and tested for diffusion, permeation, absorption, electrical conductivity, carbonation and microstructure. It was found that spacers increase all transport properties, the extent depending on type of spacer, drying regime and transport mechanism. The spacer-concrete interface is weak, porous and micro-cracked, and this lowers the resistance of concrete to ingress of aggressive agents. The beneficial effects of SCMs (strength enhancement and densification) and prolonged curing (120-day) are insufficient to overcome the negative effects of spacers. Implications for durability are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Production and diffusion of H 2 O 2 during the interaction of a direct current pulsed atmospheric pressure plasma jet on a hydrogel

The interaction of cold atmospheric pressure plasma jets with hydrogels has been used as a model system to study the interaction of plasmas with tissues. In this study, we analyze the diffusion of reactive oxygen species (in particular H 2 O 2 ) and quantify the amount of plasma-produced H 2 O 2 species that penetrates into a gelatin hydrogel. We show that the diffusion constant of H 2 O 2 in 10% gelatin hydrogel is similar to its diffusion constant in water and that the production of H 2 O 2 in the hydrogel is significantly less than the production of H 2 O 2 in distilled water for the same plasma operation conditions suggesting that the scavenging of OH radicals at the plasma-gel interface significantly reduces the H 2 O 2 production.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Comparison of passivation properties of plasma-assisted ALD and APCVD deposited Al 2 O 3 with SiN x capping

In this paper, we report on the direct comparison of Al 2 O 3 films deposited by plasma-assisted atomic layer deposition (ALD) and atmospheric pressure chemical vapor deposition (APCVD) techniques on the passivation properties of both bare and boron diffused Si surfaces. It is found that ALD and APCVD deposited Al 2 O 3 layers with SiN x capping have very similar chemical composition, hydrogen concentration at the Al 2 O 3 /Si interface, and interface defect density (D it ), but the ALD film has slightly higher negative fixed charge (Q f ) after a high temperature (~750 °C) contact firing cycle typically used for solar cell fabrication. Both films showed excellent surface recombination velocities of <5 cm/s on planar and textured un-diffused Si wafers, but the ALD films gave 1 to 8 fA/cm 2 lower emitter saturation current densities (J 0e ) on implanted boron emitters with sheet resistance in the range of 90–180 Ω/. This is attributed to the observed slightly higher negative charge-induced field-effect passivation in the ALD films. However, SiN x /Al 2 O 3 /p + /n/n + passivated emitter rear totally diffused (PERT) cell structures fabricated with 110 and 150 Ω/ emitter in this study showed no appreciable difference in cell efficiency. Device analysis and simulations showed that even for >23% high-performance solar cells design, with very low bulk and rear contact recombination, the observed small difference in J 0e has negligible effect on cell efficiency. Furthermore, APCVD Al 2 O 3 passivation of B emitter can produce comparable efficiencies to their counterpart ALD Al 2 O 3 passivated n-type Si solar cells.

14 SOLAR ENERGY↗
DOE OSTI2025

Creating Favorable Pt/Co Interfaces via a Two‐Step Approach for Constructing Highly Durable PtCo Intermetallic Fuel Cell Catalysts

Structurally ordered PtCo intermetallics are one of the most promising oxygen-reduction catalysts in proton exchange membrane fuel cells (PEMFCs) due to their intrinsically improved catalytic activity and stability relative to PtCo solid-solution alloys. However, increasing the heating temperature to achieve a desirable high degree of ordering results in severe particle agglomeration and low mass activity and stability. Herein, a two-step synthesis approach is developed to create an L1 2 -Pt 3 Co intermetallic structure with an increased ordering degree and well-dispersed ultrafine particles. The first step of the synthesis yields ultrafine Pt nanoparticles that are well-dispersed on the ZIF-8-derived carbon support. The second adsorption step enables us to fine-tune the Pt and Co interfaces, assisted by optimal amino acids, to establish a favorable Co-rich environment around fine Pt nanoparticles, facilitating Co diffusion into the Pt crystalline under mild thermal conditions (<800 °C). In conclusion, this two-step ordered L1 2 -Pt 3 Co catalyst is systematically evaluated using membrane electrode assemblies under heavy-duty vehicle (HDV) conditions and demonstrated exceptional performance and durability, retaining 1.35 A cm -2 only a 7% loss in current density at 0.7 V after an extensive accelerated stress test of 150,000 voltage cycles.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Combined visualisation of cavitation and vortical structures in a real-size optical diesel injector

A high-speed flow visualisation set-up comprising of combined diffuse backlight illumination (DBI) and schlieren imaging has been developed to illustrate the highly transient, two-phase flow arising in a real-size optical fuel injector. The different illumination nature of the two techniques, diffuse and parallel light respectively, allows for the capturing of refractive-index gradients due to the presence of both interfaces and density gradients within the orifice. Hence, the onset of cavitation and secondary-flow motion within the sac and injector hole can be concurrently visualised. Experiments were conducted utilising a diesel injector fitted with a single-hole transparent tip (ECN spray D) at injection pressures of 700–900 bar and ambient pressures in the range of 1–20 bar. High-speed DBI images obtained at 100,000 fps revealed that the orifice, due to its tapered layout, is mildly cavitating with relatively constant cavity sheets arising mainly in regions of manufacturing imperfections. Nevertheless, schlieren images obtained at the same frame rate demonstrated that a multitude of vortices with short lifetimes arise at different scales in the sac and nozzle regions during the entire duration of the injection cycle but the vortices do not necessarily result in phase change. The magnitude and exact location of coherent vortical structures have a measurable influence on the dynamics of the spray emerging downstream the injector outlet, leading to distinct differences in the variation of its cone angle depending on the injection and ambient pressures examined.

42 ENGINEERING↗
DOE OSTI2021

A Review: Microstructural and Phase Evolution in Alloys during Extended Plastic Deformation

Materials in service and during processing are often subjected to plastic deformation. For multi-phase metallic alloys, simple geometric models and atomistic simulations suggest that two distinctive regimes in these materials’ evolution during deformation exist. At low strains, evolutions are often dominated by the kinetic roughening of interfaces, which results from the superdiffusive transport of matter in sheared crystals. Furthermore, at high strains and temperatures where thermal diffusion is sluggish, on the other hand, shearing- induced forced atomic mixing dominates these evolutions, resulting in significantly enhanced solubility. Distinguishing these two regimes is shown to provide a convenient framework for rationalizing and analyzing recent experiments and simulations on wear of layered structures in the low strain-regime and nonequilibrium phase co-existence and self-organization in highly immiscible or reactive alloy systems in the high-strain regime.

36 MATERIALS SCIENCE↗