Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “induction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Condition assessment of cable insulation materials in advanced reactor environments

While existing cable insulation materials are sufficient for use in the current reactor fleet, environmental conditions inside some advanced reactors, such as small modular reactors, will be substantially harsher. The work herein was conducted to assess the performance and overall survivability of several high-temperature, radiation resistant insulation polymers in a simulated small modular reactor environment. The materials evaluated under this research include polyether ether ketone, polyimide, and silicone rubber. These polymers were subjected to 1000 h of environmental stress exposure under two different conditions: 1) high temperature (i.e., 250 °C) in atmospheric pressure and 2) high temperature in a low-pressure vacuum (i.e., less than 2 psia). During the environmental exposure process, each insulation was periodically tested using several materials characterization techniques including Fourier transform infrared spectroscopy, oxidation induction time, and oxidation induction temperature. The objective of this testing was to assess and monitor changes that occurred in the thermal and chemical properties of the materials during the environmental exposures. The overall survivability of each insulation was assessed based on these property changes. The results of this research revealed that the polyimide and polyether ether ketone insulations had significantly better thermal and chemical stability than the silicone rubber during both the high-temperature atmospheric and vacuum exposures. Both polyimide and polyether ether ketone experienced minimal reductions in their chemical and thermal properties over the course of 1000 h in the simulated environments. Finally, based on this research, polyimide and polyether ether ketone show promise as potential base materials for small modular reactor cable insulation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Optimized simple and affordable procedure for differentiation of monocyte-derived dendritic cells from LRF: An accessible and valid alternative biological source

Dendritic cells are one of the most popular immune cells, which plays a remarkable role in both immunotherapy and tolerance induction. Due to unwanted side effects of leukocyte presence in donated blood, the policy of blood service is the pre-storage reduction of leukocytes, which today, filtration is the most common method for this purpose. The filtration method has led to diminished access to Buffy coat as a generally used conventional source of biological cells. We developed a simple, affordable, and reproducible method for dendritic cell differentiation from filter-derived monocytes and, the results of the filter study were compared with differentiated DCs from the conventional buffy coat-derived monocytes. The Monocytes were recovered from leukoreduction filter using an optimized protocol with supplemented PBS buffer. Following the adhesion method, CD14{sup +} Monocyte-enriched population with the purity of 94 % was obtained. After cytokine stimulation over a 6-day period and maturation induction by LPS, differentiated DCs were evaluated for morphology, surface markers (CD86, CD40, CD83 and, HLA-DR), antigen uptake potency and IL-12 secretion. Analysis and comparison of the results represented no significant difference between the two groups. Accordingly, we conclude that leukoreduction filters could be introduced as a reliable and research-grade source of monocyte for DC generation in biological research.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Dichloroacetate enhances the anti-tumor effect of sorafenib via modulating the ROS-JNK-Mcl-1 pathway in liver cancer cells

Liver cancer is one of the most common and high recurrence malignancies. Besides radiotherapy and surgery, chemotherapy also plays an essential role in the treatment of liver cancer. Sorafenib and sorafenib-based combination therapies have been proven efficacy against tumors. However, previous clinical studies have indicated that some patients with liver cancer are resistant to sorafenib treatment and the existing strategies are not satisfactory in the clinic. Therefore, it is urgent to investigate strategies to improve the effectiveness of sorafenib for liver cancer and to explore effective drug combinations. In the present study, we found that dichloroacetate (DCA) could significantly enhance the anti-tumor effect of sorafenib on liver cancer cells, including reduced viability and dramatically promoted apoptosis in liver cancer cells. Moreover, compared to sorafenib alone, the combination of DCA and sorafenib markedly increased the degradation of anti-apoptotic protein Mcl-1 by enhancing its phosphorylation. Overexpression of Mcl-1 could significantly attenuate the synergetic effect of DCA and sorafenib on apoptosis induction in liver cancer cells. Furthermore, we found that the ROS-JNK pathway was obviously activated in the DCA combined sorafenib group. The levels of ROS and p-JNK were dramatically up-regulated in the two drug combination groups. Antioxidant NAC could alleviate the synergetic effects of DCA and sorafenib on ROS generation, JNK activation, Mcl-1 degradation, and cell apoptosis. Moreover, DCA and sorafenib's effects on Mcl-1 degradation and apoptosis could also be inhibited by JNK inhibitor ‘SP’600125. Finally, the synergetic effects of DCA and sorafenib on tumor growth suppression, Mcl-1 degradation and induction of apoptosis were also validated in liver cancer xenograft in vivo. These findings indicate that DCA enhances the anti-tumor effect of sorafenib via the ROS-JNK-Mcl-1 pathway in liver cancer cells. This study may provide new insights to improve the chemotherapeutic effect of sorafenib, which may be benecial for further clinical application of sorafenib in liver cancer treatment.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Mechanically induced localisation of SECONDARY WALL INTERACTING bZIP is associated with thigmomorphogenic and secondary cell wall gene expression

Plant growth requires the integration of internal and external cues, perceived and transduced into a developmental programme of cell division, elongation and wall thickening. Mechanical forces contribute to this regulation, and thigmomorphogenesis typically includes reducing stem height, increasing stem diameter, and a canonical transcriptomic response. We present data on a bZIP transcription factor involved in this process in grasses. Brachypodium distachyon SECONDARY WALL INTERACTING bZIP (SWIZ) protein translocated into the nucleus following mechanostimulation. Classical touch-responsive genes were upregulated in B. distachyon roots following touch, including significant induction of the glycoside hydrolase 17 family, which may be unique to grass thigmomorphogenesis. SWIZ protein binding to an E-box variant in exons and introns was associated with immediate activation followed by repression of gene expression. SWIZ overexpression resulted in plants with reduced stem and root elongation. These data further define plant touch-responsive transcriptomics and physiology, offering insights into grass mechanotranduction dynamics.

Coomey, Joshua↗
DOE OSTI2025

Active Sites in the Dealuminated Beta Zeolite-Supported Cobalt Catalyst for Non-Oxidative Ethane Dehydrogenation

Dispersed metal species in siliceous zeolites have been actively studied for non-oxidative dehydrogenation of ethane (NDE). Fundamental insights into the dynamics of metal species in zeolites under reaction conditions have rarely been explored. Herein, we report an atomic level understanding of the dynamics and activity of cobalt (Co) sites in dealuminated Beta zeolite (DeAl-BEA) for NDE during induction and reaction conditions with extensive characterization techniques such as diffuse reflectance UV–vis, solid state nuclear magnetic resonance and X-ray photoelectron, X-ray diffraction along with in situ Fourier transform infrared and X-ray absorption spectroscopy. For a catalyst with 0.5 mass % Co loading, tetrahedral Co 2+ mononuclear sites, di-coordinated to the zeolite framework and with two silanol groups in vicinity (i.e., (≡SiO) 2 Co(HO–Si≡) 2 ), form upon exposure to hydrogen during induction and persist through the NDE reaction. Increasing the Co loading to 3.0 mass % yielded Co sites with similar electronic and coordination structures but slightly elongated Co–O bonds. Upon cooling to room temperature, the Co sites persisted in the same coordination environment, though the disappearance of a feature in the Co K-edge near-edge region revealed changes in the active site’s electronic structure coinciding with modest shifts in bond lengths. The electronic structure and activity of (≡SiO) 2 Co(HO–Si≡) 2 sites were studied comparatively to a few other hypothetical Co 2+ coordination structures, using electronic structure calculations and microkinetic simulations. The simulations showed that NDE is controlled by β-hydride elimination following C–H bond activation and that Co-sites possessing flexibility because of neighboring silanol defects are more active. Interestingly, dinuclear Co–O–Co sites (i.e., (≡SiO)Co(HO–Si≡) 2 –O–(HO–Si≡) 2 Co(≡SiO)) were more active than the mononuclear (≡SiO) 2 Co(HO–Si≡) 2 sites because of favorable hydrogen bonding with the vicinal silanol groups. In conclusion, the present study bridges the gap between the knowledge acquired by ex-situ characterizations and the active sites under the reaction conditions in alkane dehydrogenation chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamic Multiplexed Control and Modeling of Optogenetic Systems Using the High-Throughput Optogenetic Platform, Lustro

The ability to control cellular processes using optogenetics is inducer-limited, with most optogenetic systems responding to blue light. To address this limitation, we leverage an integrated framework combining Lustro, a powerful high-throughput optogenetics platform, and machine learning tools to enable multiplexed control over blue light-sensitive optogenetic systems. Specifically, we identify light induction conditions for sequential activation as well as preferential activation and switching between pairs of light-sensitive split transcription factors in the budding yeast, Saccharomyces cerevisiae. We use the high-throughput data generated from Lustro to build a Bayesian optimization framework that incorporates data-driven learning, uncertainty quantification, and experimental design to enable the prediction of system behavior and the identification of optimal conditions for multiplexed control. This work lays the foundation for designing more advanced synthetic biological circuits incorporating optogenetics, where multiple circuit components can be controlled using designer light induction programs, with broad implications for biotechnology and bioengineering.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Quantitative Determination of Electronic Effects in Free Radicals through Open-Shell Hammett Substituent Constants

Hammett substituent constants (σ), which quantify the electronic effects of functional groups, are widely used for predicting the properties of organic compounds and investigating reaction mechanisms. While these values have been obtained for a wide range of closed-shell substituents, measurements of analogous values for open-shell substituents are rare due to challenges associated with their short lifetimes. Here, in this report, we developed a combined experimental and computational approach for quantifying the electronic properties of open-shell substituents based on changes in nitrile vibrational frequencies (ν(C≡N)). By coupling pulse radiolysis and time-resolved infrared spectroscopy (PR-TRIR), we measured ν(C≡N) IR bands of 30 para - and meta -substituted benzonitriles bearing C-, N-, and S-centered radicals. A linear scaling relationship was obtained between these experimental values and values obtained from DFT calculations. Using these computed values, two different Hammett constants, σ m , and σ p + , were determined for a series of C-, N-, O-, S-, Si-, and B-centered radicals. The differences between σm and σp+ values enable the separate evaluation of inductive and resonance effects in these open-shell substituents. The results suggest that there are three classes of radicals: one is electron withdrawing (σ m , σ p + > 0), one is electron donating (σm, σp+ < 0), and one is inductively withdrawing but resonance donating (σ m > 0, σ p + < 0). Our study represents a general approach to the analysis of the electronic properties of open-shell species and has potential applications in a wide range of molecular processes involving free radical intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Early-stage uranium-hydrogen corrosion kinetics and mechanism

Research into the early-stage uranium-hydrogen degradation mechanism lacks unified interpretation and understanding due to inadequate temporal and spatial characterization resolution required to unify reaction observations. In this study, white-light interferometry was adapted to characterize the uranium-hydrogen reaction at a temperature of 50 °C and hydrogen pressure of 13.8 kPa. The uranium surface remained unchanged for 62 min during the hydride induction period before the first hydride blister appeared. This blister was monitored from induction through critical spallation and UH₃ powder release during rapid surface hydriding. The critical spallation dimensions measured for height, diameter, area, and perimeter of the first blister were 1.79 µm, 17.58 µm, 187.7 µm 2 and 59.79 µm. Hydriding growth kinetics were assessed by tracking the first hydride site over the reaction time. Analysis shows that the spall-front velocity of the hydride was changing at a rate of 0.91 µm/min which compares favorably with legacy Sievert’s experiments in literature. Total percentage of the surface area hydrided after 242 min was 42.7%, and post-characterization of the UH 3 powders shows both α-UH 3 and β-UH 3 . This work highlights the strength of characterizing the early-stage uranium-hydrogen reaction using white-light interferometry, but more importantly, unifying the understanding and mechanism of the uranium-hydrogen reaction kinetics.

Materials science↗
DOE OSTI2020

A modular chromosomally integrated toolkit for ectopic gene expression in Vibrio cholerae

The ability to express genes ectopically in bacteria is essential for diverse academic and industrial applications. Two major considerations when utilizing regulated promoter systems for ectopic gene expression are (1) the ability to titrate gene expression by addition of an exogenous inducer and (2) the leakiness of the promoter element in the absence of the inducer. Here, we describe a modular chromosomally integrated platform for ectopic gene expression in Vibrio cholerae . We compare the broadly used promoter elements P tac and P BAD to versions that have an additional theophylline-responsive riboswitch (P tac -riboswitch and P BAD -riboswitch). These constructs all exhibited unimodal titratable induction of gene expression, however, max induction varied with P tac > P BAD > P BAD -riboswitch > P tac -riboswitch. We also developed a sensitive reporter system to quantify promoter leakiness and show that leakiness for P tac > P tac -riboswitch > P BAD ; while the newly developed P BAD -riboswitch exhibited no detectable leakiness. We demonstrate the utility of the tightly inducible P BAD -riboswitch construct using the dynamic activity of type IV competence pili in V. cholerae as a model system. The modular chromosomally integrated toolkit for ectopic gene expression described here should be valuable for the genetic study of V. cholerae and could be adapted for use in other species.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Supercapacitance and superinductance of TiN and NbTiN films in the vicinity of superconductor-to-insulator transition

We investigate the low-temperature complex impedance of disordered insulating thin TiN and NbTiN films in the frequency region 400 Hz–1 MHz in close proximity to the superconductor–insulator transition (SIT). The frequency, temperature, and magnetic field dependencies of the real and imaginary parts of the impedance indicate that in full accord with the theoretical predictions and earlier observations, the films acquire self-induced electronic granularity and become effectively random arrays of superconducting granules coupled via Josephson links. Accordingly, the inductive component of the response is due to superconducting droplets, while the capacitive component results from the effective Josephson junctions capacitances. The impedance crosses over from capacitive to inductive behavior as films go across the transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Design considerations of series type hybrid circuit breaker (S‐HCB)

Abstract The series‐type direct current (DC) hybrid circuit breaker (S‐HCB) concept was previously reported to offer better performance than solid‐state circuit breakers (SSCB) and hybrid circuit breakers (HCB). S‐HCB offers low conduction power loss like an HCB and ‐scale interruption time, which is even faster than an SSCB. It uses a pulse transformer to isolate the lower‐voltage high‐inductance power electronic circuit from the high‐voltage, low‐inductance main power loop. This paper provides analysis of the impact of the S‐HCB circuit components on the overall system performance and a scalable S‐HCB design guide for different DC system voltage and current ratings. In addition, system energy flow analysis is performed in the time domain to provide an understanding of how energy is delivered, dissipated, and released throughout the entire fault interruption process. The S‐HCB prototype was experimentally tested at 3 kV/30 A and 6 kV/150A with the results showing the interruption of the low fault current of 30 A and the high fault current of 150 A within 8 and maintaining the fault current at a near zero value for 300 to enable an arcless opening of a series mechanical switch. The key design challenges of S‐HCB at high voltage and high current ratings were discussed and possible solutions to mitigate those challenges were introduced.

Alashi, Mahmoud↗
DOE OSTI2020

Effects of temperature and density evolution in MHD simulations of HIT-SI

The helicity injected torus-steady inductive (HIT-SI) experiment uses steady inductive helicity injection to form a spheromak equilibrium and sustain the structure against resistive decay. Helicity injection is performed using two half-tori “injectors” connected to the main plasma volume, whose fields are oscillated in an AC manner. The properties of the sustained spheromak equilibrium have been experimentally observed to vary with the frequency of the injector oscillation, producing higher current gains and more-symmetric and outwardly shifted current centroids with higher frequency. A computational scan of injector frequency using the 3D MHD code PSI-Tet, which models the entire HIT-SI plasma volume including the injectors, has been performed, including a comparison of the results using the full Hall MHD model to those obtained using a simplified “zero-beta” (constant temperature and density) model. The results of both PSI-Tet models are also compared with experimental data and with simulations using the NIMROD code, which does not model the injector regions. The results of the PSI-Tet simulations show that the average temperature and current gain increase with injector frequency, in agreement with experimental trends. The simulations also show qualitative changes in the dynamics of several quantities with increasing injector frequency, such as density oscillations and current evolution. However, the outward shift and symmetrizing of the current centroid, observed experimentally, are not observed in these MHD simulations, indicating that unresolved or excluded dynamics may be important.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Flattening of the tokamak current profile by a fast magnetic reconnection with implications for the solar corona

During tokamak disruptions, the profile of the net parallel current is observed to flatten on a time scale that is so fast that it must be due to a fast magnetic reconnection. After a fast magnetic reconnection has broken magnetic surfaces, a single magnetic field line covers an entire volume and not just a magnetic surface. The current profile, given by K &#x2261; &#x3BC; 0 j | | / B , relaxes to a constant within that volume by Alfven waves propagating along the chaotic magnetic field lines. The time scale for this relaxation determines the commonly observed disruption phenomena of a current spike and a sudden drop in the plasma internal inductance. An efficient method for studying this relaxation is derived, which allows a better understanding of the information encoded in the current spike and the associated sudden drop in the plasma internal inductance. Implications for coronal heating are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Investigation of magnetic noise from conductive shields in the 10–300 kHz frequency range

Here we present experimental and theoretical investigations of magnetic noise originating from radio-frequency (RF) conductive shields of flat geometry in the inductance-dominated impedance regime below 300 kHz. The measurement is based on a Q-factor determination of a coil that provides a sufficient sensitivity, placed at the position where the shield magnetic noise is measured. The theory is based on calculations of magnetic field and inductance of one or a few flat rings that emulate a conductive shield. The theoretical model is found to be in close agreement with experimental data. It can be used to predict the magnetic noise of a conductive shield with different thicknesses, conductivities, and temperatures at different distances for a wide range of frequencies. Although the model can be generalized for a more arbitrary shield geometry, in its presented form, it can be applied to the magnetic noise predictions when the shield surface curvature is not large. One important conclusion is that the RF conductive shield can generate the magnetic noise much lower than femtotesla, and, thus, it can be used in many precision experiments targeting minute high-frequency magnetic signals, such as detection of magnetic resonance imaging and nuclear quadrupole resonance signals and search for axion dark matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

NENCI-2021. I. A large benchmark database of non-equilibrium non-covalent interactions emphasizing close intermolecular contacts

In this work, we present NENCI-2021, a benchmark database of ~8000 Non-Equilibirum Non-Covalent Interaction energies for a large and diverse selection of intermolecular complexes of biological and chemical relevance. To meet the growing demand for large and high-quality quantum mechanical data in the chemical sciences, NENCI-2021 starts with the 101 molecular dimers in the widely used S66 and S101 databases and extends the scope of these works by (i) including 40 cation–π and anion–π complexes, a fundamentally important class of non-covalent interactions that are found throughout nature and pose a substantial challenge to theory, and (ii) systematically sampling all 141 intermolecular potential energy surfaces (PESs) by simultaneously varying the intermolecular distance and intermolecular angle in each dimer. Designed with an emphasis on close contacts, the complexes in NENCI-2021 were generated by sampling seven intermolecular distances along each PES (ranging from 0.7× to 1.1× the equilibrium separation) and nine intermolecular angles per distance (five for each ion–π complex), yielding an extensive database of 7763 benchmark intermolecular interaction energies (E int ) obtained at the coupled-cluster with singles, doubles, and perturbative triples/complete basis set [CCSD(T)/CBS] level of theory. The E int values in NENCI-2021 span a total of 225.3 kcal/mol, ranging from -38.5 to +186.8 kcal/mol, with a mean (median) E int value of -1.06 kcal/mol (-2.39 kcal/mol). In addition, a wide range of intermolecular atom-pair distances are also present in NENCI-2021, where close intermolecular contacts involving atoms that are located within the so-called van der Waals envelope are prevalent—these interactions, in particular, pose an enormous challenge for molecular modeling and are observed in many important chemical and biological systems. A detailed symmetry-adapted perturbation theory (SAPT)- based energy decomposition analysis also confirms the diverse and comprehensive nature of the intermolecular binding motifs present in NENCI-2021, which now includes a significant number of primarily induction-bound dimers (e.g., cation–π complexes). NENCI-2021 thus spans all regions of the SAPT ternary diagram, thereby warranting a new four-category classification scheme that includes complexes primarily bound by electrostatics (3499), induction (700), dispersion (1372), or mixtures thereof (2192). A critical error analysis performed on a representative set of intermolecular complexes in NENCI-2021 demonstrates that the E int values provided herein have an average error of ±0.1 kcal/mol, even for complexes with strongly repulsive E int values, and maximum errors of ±0.2–0.3 kcal/mol (i.e., ~±1.0 kJ/mol) for the most challenging cases. For these reasons, we expect that NENCI-2021 will play an important role in the testing, training, and development of next-generation classical and polarizable force fields, density functional theory approximations, wavefunction theory methods, and machine learning based intra- and inter-molecular potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

External charge compensation in etched gallium nitride measured by x-ray photoelectron spectroscopy

Electronic states at GaN surfaces and at regrowth and heteroepitaxy interfaces inhibit electronic device performance. Understanding electronic state configuration at the GaN surface is, therefore, crucial for the development of GaN-based devices, which are currently of considerable interest in power electronic applications. GaN and other wurtzite III-nitrides possess large spontaneous polarization along the c-axis, producing a bound sheet charge at the surface, which affects the electronic state configuration through the formation of internal and external compensation charges. Defects induced by conventional plasma-based dry etching methods may inhibit the internal screening of this bound charge and thus increase the concentration of external charged states. The surface band bending of n-type Ga-face GaN (0001) was measured with x-ray photoelectron spectroscopy after inductively coupled plasma etching to investigate the impact of dry etching on external charge compensation. GaN samples were etched using inductively coupled plasma with varying rf power and a novel plasma-enhanced atomic layer etching method using an oxidation, fluorination, and ligand-exchange mechanism. The band bending varied from 0.0 to 0.8 ± 0.1 eV for the samples measured.

Hatch, Kevin A. (ORCID:0000000283118623)↗
DOE OSTI2022

A classical model for three-body interactions in aqueous ionic systems

We present a classical induction model to evaluate the three-body ion–water–water (I–W–W) and water–water–water (W–W–W) interactions in aqueous ionic systems. The classical description of the induction energy is based on electrostatic distributed multipoles up to hexadecapole and distributed polarizabilities up to quadrupole–quadrupole on the O and H atoms of water. The monatomic ions were described by a point charge and a dipole–dipole polarizability, while for the polyatomic ions, distributed multipoles up to hexadecapole and distributed polarizabilities up to quadrupole–quadrupole were used. The accuracy of the classical model is benchmarked against an accurate dataset of 936 (I–W–W) and 2184 (W–W–W) three-body terms for 13 different monatomic and polyatomic cation and anion systems. The classical model shows excellent agreement with the reference second order Moller–Plesset and coupled-cluster single double and perturbative triple [CCSD(T)] three-body energies. The Root-Mean-Square-Errors (RMSEs) for monatomic cations, monatomic anions, and polyatomic ions were 0.29, 0.25, and 0.12 kcal/mol, respectively. The corresponding RMSE for 1744 CCSD(T)/aVTZ three-body (W–W–W) energies, used to train MB-pol, was 0.12 kcal/mol. The accuracy of the proposed classical model demonstrates that the three-body term for aqueous ionic systems can be accurately modeled classically. This approach provides a fast, efficient, and as-accurate path toward modeling the three-body term in aqueous ionic systems that is fully transferable across systems with different ions without the need to fit to tens of thousands of ab initio calculations for each ion to extend existing many-body force fields to interactions between water and ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Local dynamic responses of magnetic reconnection to three-dimensional perturbations in a laboratory plasma

The dynamic responses of magnetic reconnection to localized three-dimensional (3D) magnetic field perturbations imposed by a pair of figure-8-shaped coils are investigated in the Magnetic Reconnection Experiment (MRX) device. Both the magnetic field geometry and current sheet profiles are altered by external perturbations. For the case when the inductive electric field associated with these perturbations aligns with the preexisting reconnection electric field, O-type magnetic structures appear within an elongated current sheet. When these magnetic structures are ejected downstream at the speed close to the ion outflow velocity, the inductive electric field is enhanced considerably. Despite that the imposed perturbation amplitude is larger than 30% of the original reconnecting magnetic field, the overall reconnection process remains robust without current sheet disruptions. This technique to form O-type magnetic structures can serve as an additional experimental knob for future systematic laboratory investigations of 3D magnetic reconnection and related instabilities without disrupting two-dimensional current sheet.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗