SEARCH · Engineering Papers

Results for “gyroscope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Development of an analysis for the determination of coupled helicopter rotor/control system dynamic response. Part 2: Program listing

A theoretical analysis is developed for a coupled helicopter rotor system to allow determination of the loads and dynamic response behavior of helicopter rotor systems in both steady-state forward flight and maneuvers. The effects of an anisotropically supported swashplate or gyroscope control system and a deformed free wake on the rotor system dynamic response behavior are included.

Sutton, L. R.↗

NASA NTRS1974

Design/cost tradeoff studies. Appendix A. Supporting analyses and tradeoffs, book 2. Earth Observatory Satellite system definition study (EOS)

Attitude reference systems for use with the Earth Observatory Satellite (EOS) are described. The systems considered are fixed and gimbaled star trackers, star mappers, and digital sun sensors. Covariance analyses were performed to determine performance for the most promising candidate in low altitude and synchronous orbits. The performance of attitude estimators that employ gyroscopes which are periodically updated by a star sensor is established by a single axis covariance analysis. The other systems considered are: (1) the propulsion system design, (2) electric power and electrical integration, (3) thermal control, (4) ground data processing, and (5) the test plan and cost reduction aspects of observatory integration and test.

Source record↗

NASA NTRS1975

Development of an analysis for the determination of coupled helicopter rotor/control system dynamic response. Part 1: Analysis and applications

Sutton, L. R.↗

NASA NTRS1975

Limit cycle analysis of large space telescope with CMG nonlinearity

The existence and characteristics of self-sustained oscillations were studied in the Large Space Telescope (LST) system due to the presence of nonlinear gimbal friction in the control moment gyroscopes (CMG's). A continuous data single-axis model of the LST is considered. A solid friction model is used to represent CMG gimbal friction. A rigorous mathematical model is derived for use in a continuous describing function analysis. Conditions for self-sustained oscillations are then determined.

Seltzer, S. M.↗

NASA NTRS1974

Viking heat sterilization - Progress and problems

The Viking Mars landers to be launched in 1975 will carry experiments in biology, planetology, and atmospheric physics. A terminal dry-heat sterilization process using an inert gas was chosen to meet planetary quarantine requirements and preclude contamination of the biology experiment by terrestrial organisms. Deep sterilization is performed at the component level and terminal surface sterilization at the system level. Solutions to certain component problems relating to sterilization are discussed, involving the gyroscope, tape recorder, battery, electronic circuitry, and outgassing. Heat treatment placed special requirements on electronic packaging, including fastener preload monitoring and solder joints. Chemical and physical testing of nonmetallic materials was performed to establish data on their behavior in heat-treatment and vacuum environments. A Thermal Effects Test Model and a Proof Test Capsule were used. It is concluded that a space vehicle can be designed and fabricated to withstand heat sterilization requirements.

Daspit, L. P.↗

NASA NTRS1975

Multimode attitude and orbit control for the Atmosphere Explorer spacecraft

The orbit profile for the Atmosphere Explorer requires a velocity adjust capability of 2000 ft/sec/sec and individual maneuvers of up to 24 ft/sec in magnitude. This requirement is met by a monopropellant hydrazine propulsion subsystem which also provides, by virtue of the tank arrangement, a means of adjusting the spacecraft center of mass in orbit, thereby minimizing external disturbance torques. The attitude control subsystem is of the momentum bias type. A large internal flywheel furnishes gyroscopic stiffness and permits rapid changes in operating mode (despun to spinning mode) by controlled interchange of momentum between the flywheel and the spacecraft main body.

Stewart, B.↗

NASA NTRS1975

The Skylab program - An overview

A brief survey is made of significant aspects of the Skylab missions, with emphasis on atmospheric control, electrical power, stabilization and attitude control, prevention of instrument contamination, habitability of the spacecraft, in-flight maintenance and repair, and crew training. Skylab, unlike previous manned spacecraft, had a two-gas atmosphere of oxygen and nitrogen. The station's 25-kW capability was the largest electrical system ever flown in space. Skylab was the first flight application of large control-moment gyroscopes for attitude control. The missions provided significant scientific data in the fields of solar physics, biomedicine, earth resources, and materials processing. Particularly important was the finding of no physical limitation to men's ability to work in space for long periods.

Disher, J. H.↗

NASA NTRS1975

Large Space Telescope oscillations induced by CMG friction

Conditions are predicted under which limit cycles may be caused by the friction torque of the control moment gyroscope (CMG) output gimbal used in the Large Space Telescope (LST). The parameter plane analysis technique is described, and three separate models of the CMG output friction nonlinearity are used in three separate analyses. The results suggest that the Dahl model (included in model 3) is the best available friction model for use in dynamic analysis. The analysis and analog simulation indicate the absence of limit cycle behavior due to the CMG output gimbal friction nonlinearity for presently estimated LST numerical parameters and the occurrence of one stable and one unstable limit cycle if substantially larger numerical values are allowed for the CMG gimbal pivot friction parameter and/or the running friction torque.

Seltzer, S. M.↗

NASA NTRS1975

Two self-test methods applied to an inertial system problem

The paper describes two self-test procedures applied to the problem of estimating the biases in accelerometers and gyroscopes on an inertial platform. The first technique is the weighted sum-squared residual (WSSR) test, with which accelerator bias jumps are easily isolated, but gyro bias jumps are difficult to isolate. The WSSR method does not take full advantage of the knowledge of system dynamics. The other technique is a multiple hypothesis method developed by Buxbaum and Haddad (1969). It has the advantage of directly providing jump isolation information, but suffers from computational problems. It might be possible to use the WSSR to detect state jumps and then switch to the BH system for jump isolation and estimate compensation.

Willsky, A. S.↗

NASA NTRS1975

SSME turbopump technology improvements via transient rotordynamic analysis

The rotordynamic behavior of the high pressure oxygen turbopump and high pressure fuel pump was analyzed for the Space Shuttle Main Engine. The identification of potential rotordynamic problem areas which might arise during operation of these units prior to their testing was accomplished. Alternative procedures for correcting potential rotordynamic problems should they occur were investigated. An adequate analytic and physical understanding of the turbopump rotordynamics was developed to improve the probability of a correct diagnosis of rotordynamic problems from test data. Transient rotordynamic models were developed for both turbopumps. The transient models model the hydrodynamic forces of the turbopump seals. A linear stability analysis was performed for the turbopump rotordynamics models, which included gyroscopic effects, seal forces, speed-dependent bearing characteristics, and internal rotor damping. Results are presented and discussed.

Childs, D. W.↗

NASA NTRS1975

Perform a gyro test of general relativity in a satellite and develop associated control technology

The progress accomplished in the Stanford Gyro Relativity program during the period November 1974 to October 1975 was described. Gyro developments were continued in the main laboratory dewar, concentrating on the operation of a three axis gyro readout and on improvements to the methods of canceling trapped fields in the rotor; these efforts culminated in the first successful observation of the London moment in the spinning gyro rotor in March 1975. Following a review meeting at that time, a new goal was formulated for the next 12 to 18 months, namely to operate a gyroscope in the new ultra-low field facility with readout resolution approaching 1 arc-second. The following other tasks were also completed: (1) sputtering work, (2) magnetometry, (3) construction and installation of the North Star simulator, (4) analysis of torques on the gyro, especially in inclined orbits, (5) equivalence principle accelerometer, and (6) analysis of a twin-satellite test of relativity.

Fairbank, W. M.↗

NASA NTRS1976

Apollo experience report guidance and control systems: Primary guidance, navigation, and control system development

The primary guidance, navigation, and control systems for both the lunar module and the command module are described. Development of the Apollo primary guidance systems is traced from adaptation of the Polaris Mark II system through evolution from Block I to Block II configurations; the discussion includes design concepts used, test and qualification programs performed, and major problems encountered. The major subsystems (inertial, computer, and optical) are covered. Separate sections on the inertial components (gyroscopes and accelerometers) are presented because these components represent a major contribution to the success of the primary guidance, navigation, and control system.

Holley, M. D.↗

NASA NTRS1974

The application of microprocessors to strapdown inertial navigation

The paper describes the nature of strapdown navigators and the computational requirements associated with them. A current system design is then described in which three limited-capability microcomputers perform the tasks previously assigned to a powerful minicomputer. In addition, a technique employing dedicated microprocessors in place of conventional analog electronics in the gyroscope control loops is discussed.

Napjus, G. A.↗

NASA NTRS1975

A large-area lithium-fluoride Bragg spectrometer for stellar X-ray astronomy

A large-area Bragg spectrometer used to search for the Fe XXV X-ray emission lines of Sco X-1 is described. The device has 3400 sq cm of LiF on nine crystal panels aligned perpendicular to the longitudinal axis of the rocket. X rays satisfying the Bragg condition reflect into an array of nine companion proportional counters. A pointing system incorporating a free gyroscope with 2 degrees of freedom assures that target X rays are reflected at the required angle and produces repeated spectral scans of the X-ray continuum, which are later superimposed to correct temporal effects. The instrument is capable of detecting a narrow line flux from Sco X-1 of about .01 photons/sq cm/sec.

Stockman, H. S., Jr.↗

NASA NTRS1976

Dynamics of flexible spinning satellites with radial wire antennas

A dynamic analysis is presented for a spin-stabilized spacecraft employing four radial wire antennas with tip masses. The satellite is modelled as a 14-degree-of-freedom system, and the linearized equations of motion are found. The lowest-order vibrational modes and natural frequencies of the gyroscopically coupled system are then determined. Because the satellite spin rate is decreased by antenna deployment, a spin-up maneuver is needed. The response of the time-varying mode equations during spin-up is found for the planar modes in terms of Bessel functions and a Struve function of order -0.25. The particular solution is expressed in various forms, including an infinite series of Bessel functions and a particularly useful asymptotic expansion. An error formula for the latter is derived, showing that it gives good accuracy. A simple approximation to the complementary function is obtained using the Wenzel-Kramers-Brillouin method, and the phase error in the approximation is shown to be small.

Longman, R. W.↗

NASA NTRS1976

Some dynamic problems of rotating windmill systems

The basic whirl stability of a rotating windmill on a flexible tower is reviewed. Effects of unbalance, gravity force, gyroscopic moments, and aerodynamics are discussed. Some experimental results on a small model windmill are given.

Dugundji, J.↗

NASA NTRS1975

Floated pallet definition study. Volume 4: Summary volume

The conceptual design of a suspension system for the Floated Pallet and a retention system to support the pallet during launch, maneuvering and descent are described. In addition, a control moment gyroscope support equipment configuration study including installation and an experiment mount and erection study was performed. The impact of these separate hardware studies on the existing pallet configuration was assessed and a modified pallet common module defined.

Source record↗

NASA NTRS1976

Postflight analysis of science demonstrations

A summary of the results of the 12 Marshall Space Flight Center science demonstrations performed on Skylab is presented. The demonstrations include diffusion in liquids, ice melting, liquid floating zone, gyroscope, liquid films, immiscible liquids, Rochelle salt growth, deposition of silver crystals, fluid mechanics, neutron environment, orbital mechanics, and charged particle mobility.

Bannister, T. C.↗