Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “glass fiber”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Operational and Technical Updates to the Object Reentry Survival Analysis Tool

The Object Reentry Survival Analysis Tool (ORSAT) has been used in the NASA Orbital Debris Program Office for over 25 years to estimate risk due to uncontrolled reentry of spacecraft and rocket bodies. Development over the last 3 years has included: a major change to the treatment of carbon fiber- and glass fiber-reinforced plastics (CFRP and GFRP, respectively); an updated atmospheric model; a new model for computing casualty area around an impacting debris object; and a newly-implemented scheme to determine the breakup altitude of a reentry object. Software also was written to automatically perform parameter sweeps in ORSAT to allow for uncertainty quantification and sensitivity analysis for components with borderline demisability. These updates have improved the speed and fidelity of the reentry analysis performed using ORSAT, and have allowed for improved engineering understanding by estimating the uncertainty for each component’s survivability. A statistical model for initial conditions captures the latitude bias in population density, a large improvement over the previous inclination-based latitude-averaged models. A sample spacecraft has been analyzed with standard techniques using ORSAT 6.2.1 and again using all the updated models; we will demonstrate the variation in the total debris casualty area and overall expectation of casualty.

Ostrom, C.↗
NASA NTRS2021

Temperature and Frequency Dependent Electrical Properties of AVCOAT and Shuttle Tile Material

This technical memorandum presents the data and results from a series of tests performed on AVCOAT, charred AVCOAT, and different Shuttle Thermal Protection System (TPS) tile coatings to determine their electrical properties as a function of temperature and frequency. Initially, the samples were assumed to be insulators and the complex permittivities were measured from data collected by sandwiching each sample between two conductors to form a sandwich. However, the AVCOAT sample data showed that the material becomes conductive as it begins to char. To get an accurate conductivity reading on these charred samples, a four-point resistance probe was used to collect data. Overall, this testing showed that the virgin AVCOAT starts out as a material that is a good insulator but transitions to one with a conductivity on the order of 1860 S/m as it chars. The deeper layers of AVCOAT (un-charred) all exhibited a temperature and frequency dependence that is possibly indicative of a dielectric relaxation in the material. As the sample temperatures were increased, a knee appears in the real permittivity data sets below 1 kHz. Both the real permittivity and resistivity drop up to several orders of magnitude yet show that the material remains an insulator. The Shuttle High Temperature Reusable Surface Insulation (HRSI) tile coatings studied included Reac- tion Cured Glass (RCG), Aluminum Enhanced Thermal Barrier (AETB), and Toughened Unipiece Fibrous Insulation (TUFI). The purely glass fiber parts of the tile were removed leaving only the outer layers con- taining just the coating. The data collected shows that the RCG, AETB, and outermost layer of the TUFI have similar electrical properties. The real permittivity plots show that there appears to be a relaxation that shows up at frequencies below 1 kHz. The relaxation frequency increases with increasing temperature. Also, the real permittivity increases up to about a factor of four between room temperature and 650K. Likewise, the resistivity (related to the imaginary permittivity) decreases up to five orders of magnitude over the same temperature interval, but still remains an insulator. This data was collected to support a NASA Engineering and Safety Center (NESC) assessment team investigating the source of thermocouple anomalies in both Shuttle TPS material and AVCOAT used for on the Orion spacecraft for Exploration Flight Test 1 (EFT-1). The details of their findings will be documented in a separate report with this document serving as a reference.

Mark A Nurge↗
NASA NTRSDate not supplied

A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototypes

Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for In-Situ Resource Utilization (ISRU). When extracted these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in-situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960’s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated for many decades in works of scientific fact and also in fictional stories, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990’s.This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.

ISRU↗
NASA NTRSDate not supplied

A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototypes

Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for In-Situ Resource Utilization (ISRU). When extracted, these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in-situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960’s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated, for many decades, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990’s. This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.

Regolith↗
NASA NTRSDate not supplied

Characterization of Modern Spacecraft Materials under Space-simulated Environment

External spacecraft materials play an important role in satellite protection from the harsh space environment. Research has shown that the physical, chemical, and optical properties of matter change continuously as a result of exposure to solar radiation and aggressive chemical species produced in Earth’s upper atmosphere. Thorough knowledge of the material properties evolution throughout a planned mission lifetime helps to improve the reliability of spacecraft. Moreover, the establishment of correlation factors between true space exposure and accelerated space weather experiments at ground facilities enables accurate prediction of on-orbit material performance based on laboratory-based testing. The presented work aims to evaluate the radiation effects of low Earth orbit (LEO) environment, namely, exposure to the high-energy electrons, atomic oxygen (AO), and vacuum ultraviolet (VUV), of several modern spacecraft materials. The studied materials represent the “flight duplicates” of samples that will be launched as a part of the Materials International Space Station Experiment Flight Facility (MISSE-FF) mission in 2022. MISSE-FF flight sample collection comprises different classes of polymers, including polyimides from the Kapton family, manufactured by E.I du Pont de Nemours and Co., Polyethylene terephthalate (PET) materials, liquid crystal polymers, PI/Polyhedral Oligomeric Silsesquioxanes (POSS), and carbon and glass fiber reinforced polymers. A sequential exposure approach was undertaken to allow monitoring of degradation induced by each environmental component (electrons, AO, and VUV) separately. Surface morphology, optical, and charge transport properties of selected materials were characterized using different techniques, namely, atomic force and scanning electron microscopy, ultraviolet visible (UV/Vis) transmission, reflectance, Bidirectional Reflectance Distribution Function (BRDF), and surface potential decay measurements.

Elena Plis↗
NASA NTRSDate not supplied

A Review of Extra-Terrestrial Regolith Excavation Concepts and Prototype

Regolith is present on many extra-terrestrial bodies, and the crushed rock material it is made of contains many of the resources that are enabling for In-Situ Resource Utilization (ISRU). When extracted, these resources can be used to provide consumables such as rocket propellant, human life support, working fluids and gases for industrial processes and feedstocks for manufacturing. In addition, the regolith can also be very beneficial for construction purposes as an aggregate which can be used for construction materials and shielding for radiation protection and micrometeorite impact. Binders for regolith concrete may also be made from geopolymers that may be in the regolith. The regolith can be melted and drawn out into glass fibers and used as reinforcements in a metal, polymer, or concrete matrix. In addition, there is tremendous scientific and geological knowledge that can only be obtained by studying samples of the regolith. However, none of these valuable activities can proceed without first acquiring the regolith granular material with some type of excavation device and method. Excavation is in the critical path of many workflows that will make up the capabilities required to establish a human and robotic presence in our solar system. While scientific in-situ sampling of regolith in small quantities has been achieved since the dawn of the space age in the 1960’s, large scale excavation for mining and construction on extra-terrestrial bodies has only been contemplated, for many decades, but serious development and prototyping of excavation technologies for use in reduced gravity space environments was only started in the late 1990’s. This paper will review and document the evolution of extra-terrestrial excavation concepts and prototypes based on the available literature and the personal experience of the author who has been working on regolith excavation technology development since 1998.

Regolith↗
NASA NTRSDate not supplied

Overview of the MISSE-16 Mission and Preliminary Characterization of Novel Space Weathered Materials

The Materials International Space Station Experiment (MISSE) project is a series of experiments that began in 2001, involving the deployment of external experiment platforms on the International Space Station (ISS). Since then, more than 4,000 materials were tested yielding valuable data and insights into the performance of materials and coatings in the harsh space environment, as well as providing a platform for testing and validating new materials and technologies. The results of the MISSE experiments have contributed to the development of more durable and reliable spacecraft and equipment, as well as improving our understanding of the space environment and its effects on human space exploration. To gain deeper insights into the changes in material properties of both novel and heritage spacecraft materials over the course of a mission, we proposed to enhance the MISSE hardware. This was achieved by integrating a high-resolution camera that can capture both RGB and IR color data, along with an updated illumination scheme. The identical sets of selected materials were mounted on the Zenith, Ram, and Wake faces of the ISS to expose them to predominant vacuum ultraviolet (VUV), atomic oxygen, and high-energy electron conditions. In addition, we exposed flight duplicates of these materials to a simulated space environment, which included sequential exposure to the same irradiation species on the ground. This allowed us to study the effects of space exposure on the materials in a controlled manner and to compare their behavior in both real and simulated space environments. The MISSE-FF flight sample collection comprised different classes of polymers, including polyimides from the Kapton family, manufactured by E.I du Pont de Nemours and Co., Polyethylene terephthalate (PET) materials, liquid crystal polymers, PI/Polyhedral Oligomeric Silsesquioxanes (POSS), and carbon and glass fiber reinforced polymers. The experimental cadence during the MISSE-16 mission (~6 months) included daily images of each sample for the first week, weekly for the next 2 months, and monthly the remaining duration of the mission. This paper will focus on the flight duplicate as well as the postflight optical characterization of novel and heritage materials currently under observation on the MISSE-FF.

Jainisha R Shah↗
DOE OSTI2020

Analyzing Next-Generation Supply Chains Using the Materials Flows through Industry Tool

The Materials Flows through Industry (MFI) tool is a supply chain modeling tool developed at the National Renewable Energy Laboratory (NREL) with funding from the Department of Energy's Advanced Manufacturing Office. MFI was created to identify and analyze opportunities to reduce the energy and carbon intensities of the U.S. industrial sector (Hanes and Carpenter 2017). In this work, we present an overview of the MFI tool's structure and capabilities, as well as the results of using MFI to analyze a novel NREL-developed process to 'upcycle' PET plastic into higher-value composite materials (Rorrer et al. 2019). This process combines recycled PET (rPET) plastic with inputs that can be derived from biomass, including muconic acid, acrylic acid, and ethylene glycol, to chemically break down the plastic back to its monomers in a process called glycolization. Then, repolymerization and the application of fiberglass yields the valuable glass fiber reinforced plastic (GFRP) composite, a performance material used in the manufacture of wind turbine blades, boat hulls, and other applications. This rPET-derived GFRP was found to have superior strength and fiberglass adhesion compared to conventional GFRP formulations. Our findings indicate that this GFRP production process, were it to be widely commercialized beyond its current lab-scale, could potentially reduce the fossil energy intensity of the GFRP supply chain by between 37% and 58% compared to the conventional method of GFRP manufacture from fossil-derived inputs. We also estimate potential supply chain greenhouse gas (GHG) emissions reductions between 30% and 40% from this process. Scaling these GHG offset estimates up to annual GFRP production in the U.S. would be roughly equivalent to removing between 150,000 and 200,000 vehicles from U.S. roads. These ranges of impact estimates represent the range of differences associated with the various economic allocation methods we have assumed for the intensity contributions from the first life of the PET plastic. Following Shen et al. (2010), we derive economic allocation factors from the current price ratios of clear- and green-colored recycled PET plastic to virgin PET resin ('waste-valuation' approach) or assume them to be zero in a more simplistic allocation ('cutoff' approach). Future work involving the MFI modeling tool will also be discussed, including preliminary results comparing the energy intensity of conventional and bio-based nylons manufacturing. Attendees will also be encouraged to conduct MFI supply chain modeling of their own by requesting a user account on the MFI web application, which is freely available to the public at the following address: https://mfitool.nrel.gov.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Measured Moisture Performance of Sealed and Insulated Attics with Permeable Insulation In California Homes

This study performed detailed thermal and moisture measurements in two homes in Fresno and Clovis, California with sealed attics insulated with glass fiber insulation to determine moisture performance in inland California climates. Data were recorded once every minute for more than a year in each home to allow detailed observation of time-varying moisture and thermal conditions. Moisture measurements were taken at multiple locations in each attic and included wood moisture, surface condensation and surface relative humidity. The results showed that there are strong solar-driven diurnal cycles in attic wood and air moisture content, as well as longer-term seasonal and annual variations. Mold growth was obdserved on the North roof deck in one of the two homes even in this sunny dry climate with attics built in compliance with California building codes that specifically address sealed and insulated attics with vapor-permeable insulation. We investigated moisture stratification in the attic and found that, although there is stratification during sunny daytime hours, this was not when wood moisture content, surface humidity or surface condensation are high. Therefore, other moisture transport mechanisms are acting to increase moisture levels near the roof peak. Finally, our measurements also showed that the attic with the highest measured moisture levels did not have any mold growth, while mold was visually observed in the attic whose measurements indicted little or no concern, indicating that the state-of-the-art in moisture measurement and mold growth prediction in building assemblies may be insufficient.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Investigating Marine Environmental Degradation Of Additive Manufacturing Materials For Renewable Energy Applications

Marine renewable energy is a relatively young industry where there is a great need for rapid prototyping in design-build-test campaigns to quickly mature ground-breaking technologies. Additive manufacturing has an important role to play in the industry; however, little information is available to marine energy developers to help inform them on which additive manufacturing materials are appropriate for harsh marine environments. This paper presents an initial study on the mechanical characterization of polymeric additive manufacturing materials and degradation effects due to the marine environment. Ultem 9085, acrylonitrile styrene acrylate (ASA), and chopped carbon-filled Nylon, as well as continuous carbon and glass fiber reinforced Nylon were chosen for this study. Samples were manufactured to perform a variety of tension, shear, and compression mechanical characterization tests on the materials. Half of the samples were conditioned in Pacific Ocean water for approximately 6 months at the Pacific Northwest National Laboratory’s Marine and Coastal Research Laboratory before being returned for mechanical characterization. The mechanical testing results showed that the Ultem 9085 and ASA materials experienced little to no degradation in stiffness or strength after exposure to the marine environment. On the other hand, the Nylon-based materials suffered significant stiffness and strength degradation (over 50% in some cases) after environmental conditioning. Ultimately, these results should serve as starting points to allow marine renewable energy developers to make informed additive manufacturing material choices for their prototype deployments.

Murdy, Paul↗
DOE OSTI2024

Plastic Parallel Pathways Platform - 4P Model

Global momentum is building towards a circular economy capable of keeping plastics in use and out of waste streams. Given that 79% of all plastic produced since 1950 has accumulated in landfills or the natural environment,rapid implementation of various end-of-life (EoL) management technologies will be needed to reach this target. However, it can be challenging to develop an effective plastic EoL strategy when the available options - chemical or molecular recycling, energy recovery, upcycling, downcycling, closed-loop (plastic-to-plastic) or open-loop (plastic-to-x) recycling, among others - can generate products ranging from low-grade to virgin-quality plastic and from fuels to value-added chemicals. We present a flexible material flow model capable of analyzing the effects of both plastic-to-plastic and plastic-to-x EoL management strategies on the U.S. PET economy. This Plastic Parallel Pathways Platform (4P) assesses the environmental impacts, costs, and circularity of a PET system in which waste is managed through six potential EoL pathways: landfill, incineration with energy recovery, pyrolysis to fuel oil, upcycling to glass fiber reinforced plastic (GFRP), mechanical recycling to low-grade PET, and chemical recycling (glycolysis) to bottle-grade PET. We compare the pathways across multiple metrics using multi-criteria decision analysis (MCDA) and then use a brute force algorithm to predict an optimal combination of EoL pathways to minimize greenhouse gas (GHG) emissions and costs and maximize circularity. This work highlights the need to implement a diverse portfolio of EoL strategies in parallel to enable a PET economy that meets environmental, economic, and circularity requirements simultaneously.

downcycling↗
DOE OSTI2025

Mechanical Properties and Interfacial Bonding of Overmolded Polymer Composite Lattice Structures

This study investigates the mechanical properties and interfacial bonding of Polyamide 12 filled with Glass Fiber (PA12/GF) lattice structures overmolded with Nylon 66 (PA66) and Thermoplastic Polyurethane (TPU). The PA12/GF lattices, designed in Gyroid, Isotruss, and Octahedral geometries, were produced using the Selective Laser Sintering (SLS) technique. The thermal characteristics of both the lattice and overmolding materials were analyzed using Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). The mechanical performance and interfacial bonding were evaluated through mechanical testing and microstructural analysis. The results indicate that overmolding improved flexural strength and impact resistance of the PA12/GF lattices. For instance, the plain PA12/GF Isotruss lattice exhibited a flexural strength of 15.5 MPa. By overmolding it with TPU the flexural strength increased by up to 137%, while PA66-overmolding resulted in an increase of 371%, achieving a flexural strength of 73 MPa. In terms of impact resistance, TPU-overmolding improved performance significantly, with an increase of 1800% (Gyroid) compared to the plain lattice. Microstructural analysis revealed good adhesion at the interface, especially when both the lattice and overmolding materials were thoroughly dried prior to the overmolding process to minimize interfacial porosity. This study highlights the potential of using overmolding to enhance lattice structures performance, offering lightweight and cost-efficient solutions for automotive applications.

Talabi, Isaac [ORNL] (ORCID:0000000340215594)↗
DOE OSTI2021

Chalcogenide Glass-Capped Fiber-Optic Sensor for Real-Time Temperature Monitoring in Extreme Environments

We demonstrate a novel chalcogenide glass (ChG)-capped optical fiber temperature sensor capable of operating within harsh environment. The sensor architecture utilizes the heat-induced phase change (amorphous-to-crystalline) property of ChGs, which rapidly (80–100 ns) changes the optical properties of the material. The sensor response to temperature variation around the phase change of the ChG cap at the tip of the fiber provides abrupt changes in the reflected power intensity. This temperature is indicative of the temperature at the sensing node. We present the sensing performance of six different compositions of ChGs and a method to interpret the temperature profile between 440 °C and 600 °C in real-time using an array structure. The unique radiation-hardness property of ChGs makes the devices compatible with high-temperature and high-radiation environments, such as monitoring the cladding temperature of Light Water (LWR) or Sodium-cooled Fast (SFR) reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Ceramic fiber reinforced glass-ceramic matrix composite

A slurry of BSAS glass powders is cast into tapes which are cut to predetermined sizes. Mats of continuous chemical vapor deposition (CVD)-SiC fibers are alternately stacked with these matrix tapes. This tape-mat stack is warm-pressed to produce a 'green' composite which is heated to burn out organic constituents. The remaining interim material is then hot-pressed to form a BSAS glass-ceramic fiber-reinforced composite.

Bansal, Narottam P.↗
DOE OSTI2021

Melt extruded versus extrusion compression molded glass-polypropylene long fiber thermoplastic composites

Long fiber thermoplastic (LFT) composites are processed either with extrusion compression or fiber injection processes. The properties of LFT materials are highly influenced by processing techniques, which lead to different porosity contents, fiber length distributions, and fiber orientation distributions. It is important to understand the various LFT processing techniques and their effects on mechanical, thermal, and microscopic properties. This work considered LFT sheets processed via extrusion, which offers highly aligned fibers (referred to as “Tecnogor composites”), and LFT composites produced via extrusion compression molding (ECM), which offers a random distribution of fibers. Tecnogor composites exhibited higher flexural strength (35–65%), flexural modulus (132–172%), tensile strength (39–52%), tensile modulus (67–75%), and Izod impact resistance (195–220%) than the random LFT composites. This response was attributed to the aligned fibers in Tecnogor composites. Mathematical models including Halpin-Tsai and Lavengood-Goettler were used to predict and compare the Young’s modulus of Tecnogor and ECM composites, respectively.

mechanical testing↗
NASA NTRS2008

Investigation of Fiber Waviness in a Thick Glass Composite Beam Using THz NDE

Fiber waviness in laminated composite material is introduced during manufacture because of uneven curing, resin shrinkage, or ply buckling caused by bending the composite lay-up into its final shape prior to curing. The resulting waviness has a detrimental effect on mechanical properties, therefore this condition is important to detect and characterize. Ultrasonic characterization methods are difficult to interpret because elastic wave propagation is highly dependent on ply orientation and material stresses. By comparison, the pulsed terahertz response of the composite is shown to provide clear indications of the fiber waviness. Pulsed Terahertz NDE is an electromagnetic inspection method that operates in the frequency range between 300 GHz and 3 THz. Its propagation is influenced by refractive index variations and interfaces. This work applies pulsed Terahertz NDE to the inspection of a thick composite beam with fiber waviness. The sample is a laminated glass composite material approximately 15mm thick with a 90-degree bend. Terahertz response from the planar section, away from the bend, is indicative of a homogeneous material with no major reflections from internal plies, while the multiple reflections at the bend area correspond to the fiber waviness. Results of these measurements are presented for the planar and bend areas.

Anastasi, Robert F.↗
NASA NTRS1981

Carbon/graphite composite material study. Appendix C: NASA studies on modification of carbon/graphite fibers and alternative materials

The feasibility of modifying resin matrix composites to reduce the potential of electrical shorting from fire released fiber was explored. The effort included modifications to or coatings for graphite fibers, alternative fibers, modifications to matrix materials, and hybrid composites. The objectives included reduction of the conductivity of the graphite fiber, char formation to reduce fiber release, glass formation to prevent fiber release, catalysis to assure fiber consumption in a fire, and replacement of the graphite fibers with nonconductive fibers of similar mechanical potential.

Source record↗
DOE OSTI2023

Enhanced ductility in in-layer glass-carbon fiber/epoxy hybrid composites produced via tailored fiber placement

Experimental mechanical property results of composite materials with hybrid reinforcements (commingled glass and carbon fibers) are detailed and compared with single-fiber composite properties. In-layer hybrid materials, with carbon and glass fiber tows laid side-by-side, were produced via tailored fiber placement (TFP) technology. Detailed experiments showed a phenomenon of “enhanced ductility” of carbon fiber in the hybrid composites of 12–24% relative to an all-carbon fiber composite and multiple stress–strain peaks were observed. Here, this enhanced ductility was hypothesized to be due to the glass fibers mitigating the shock waves arising from the initial failures of carbon fibers, and preventing the premature failure of the remaining carbon fibers. A novel way to engineer the stress–strain behavior of a hybrid composite to achieve a metal-like ductile response (plateau of stress–strain behavior, often termed “elastic–plastic deformation”) was demonstrated by carefully selecting the type and composition of carbon and glass fiber materials.

36 MATERIALS SCIENCE↗