Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fusion experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Aerodynamic Data Fusion Toward the Digital Twin Paradigm

This paper considers the fusion of two aerodynamic data sets originating from differing types of physical or computer experiments. This paper specifically addresses the fusion of 1) noisy and in-complete fields from wind-tunnel measurements and 2) deterministic but biased fields from numerical simulations. These two data sources are fused in order to estimate the true field that best matches measured quantities that serve as the ground truth. For example, two sources of pressure fields about an aircraft are fused based on measured forces and moments from a wind-tunnel experiment. A fundamental challenge in this problem is that the true field is unknown and cannot be estimated with 100% certainty. A Bayesian framework is employed to infer the true fields conditioned on measured quantities of interest; essentially a statistical correction to the data is performed. The fused data may then be used to construct more accurate surrogate models suitable for early stages of aerospace design. An extension of the proper orthogonal decomposition with constraints is also introduced to solve the same problem. In this work, both methods are demonstrated on fusing the pressure distributions for flow past the RAE2822 airfoil and the Common Research Model wing at transonic conditions. Comparison of both methods reveals that the Bayesian method is more robust when data are scarce and capable of also accounting for uncertainties in the data. Furthermore, given adequate data, the proper-orthogonal-decomposition-based and Bayesian approaches lead to surprisingly similar results.

42 ENGINEERING↗
DOE OSTI2023

A multi-MeV alpha particle source via proton-boron fusion driven by a 10-GW tabletop laser

Nuclear fusion between protons and boron-11 nuclei has undergone a revival of interest thanks to the rapid progress in pulsed laser technology. Potential applications of such reaction range from controlled nuclear fusion to radiobiology and cancer therapy. A laser-driven fusion approach consists in the interaction of high-power, high-intensity pulses with H- and B-rich targets. We report on an experiment exploiting proton-boron fusion in CN-BN targets to obtain high-energy alpha particle beams (up to 5 MeV) using a very compact approach and a tabletop laser system with a peak power of ~10 GW, which can operate at high-repetition rate (up to 1 kHz). The secondary resonance in the cross section of proton-boron fusion (~150 keV in the center-of-mass frame) is exploited using a laser-based approach. The generated alpha particles are characterized in terms of energy, flux, and angular distribution using solid-state nuclear-track detectors, demonstrating a flux of ~10 5 particles per second at 10 Hz, and ~10 6 per second at 1 kHz. Hydrodynamic and particle-in-cell numerical simulations support our experimental findings. Potential impact of our approach on future spread of ultra-compact, multi-MeV alpha particle sources driven by moderate intensity (10 16 -10 17 W/cm 2 ) laser pulses is anticipated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Propagation of radio frequency waves through turbulent plasmas

The practical and economic viability of tokamak fusion reactors depends, in a significant way, on the efficiency of radio frequency (RF) waves to deliver energy and momentum to the plasma in the core of the reactor. The RF electromagnetic waves, excited by antenna structures placed near the wall of a tokamak, have to propagate through the turbulent edge plasma along their path to the core of the fusion device. In present day experiments, the radial width of the edge region and scrape-off layer is of the order of a few centimeters. In ITER, and in future fusion reactors, this width will be of the order of tens of centimeters. Any effects on RF waves due to plasma turbulence have to be properly understood in order to optimize the delivery of RF energy and momentum into the core. This paper is on a multi-pronged, theoretical and computational, approach that is being pursued to quantify the effect of edge plasma turbulence on the propagation of RF waves. The theoretical and analytical models are based on solutions of the Faraday-Ampere equation in a magnetized plasma and on the Kirchhoff tangent plane approximation. An effective medium approach has been developed so as to approximate the permittivity of a turbulent plasma by analytical expressions. The computations are being carried out with a newly developed code ScaRF that is based on the finite difference finite domain technique for solving Maxwell's equations. The plasma permittivity can be assigned as desired. The code is being used to validate the analytical and theoretical models and to evaluate their limitations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Enhanced plasma performance in C-2W advanced beam-driven field-reversed configuration experiments

TAE Technologies’ fifth-generation fusion device, C-2W (also called ‘Norman’), is the world’s largest compact-toroid device and has made significant progress in field-reversed configuration (FRC) plasma performance. C-2W produces record breaking, macroscopically stable, high-temperature advanced beam-driven FRC plasmas, dominated by injected fast particles and sustained in steady state, which is primarily limited by neutral-beam (NB) pulse duration. The NB power supply system has recently been upgraded to extend the pulse length from 30 ms to 40 ms, which allows for a longer plasma lifetime and thus better characterization and further enhancement of FRC performance. An active plasma control system is routinely used in C-2W to produce consistent FRC performance as well as for reliable machine operations using magnet coils, edge-biasing electrodes, gas injection and tunable-energy NBs. Google’s machine learning framework for experimental optimization has also been routinely used to enhance plasma performance. D

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Two-photon absorption laser induced fluorescence measurements of absolute neutral deuterium density, temperature, and bulk flow in Proto-MPEX

Neutral particle control is critical for fusion fueling and confinement. Neutral diagnostics for fusion-relevant plasmas are commonly restricted to line-integrated or ex situ methods. A non-perturbative, two-photon absorption laser induced fluorescence (TALIF) diagnostic is implemented on the Prototype Material Plasma Exposure eXperiment (Proto-MPEX) to probe neutral atomic deuterium in a fusion-relevant plasma at 1 cm intervals along the radius of the vacuum vessel. The diagnostic is situated ~20 m from the vacuum vessel, and a signal is collected along the laser injection axis, requiring only one line-of-sight. TALIF measurements are absolutely calibrated using xenon and krypton. Absolute atomic densities derived from xenon calibration are compared to absolute atomic densities derived from krypton calibration. In this work, preliminary measurements of absolute atomic deuterium density, temperature, and local bulk flow dependence on radial location and input power in Proto-MPEX are presented. Neutral atomic deuterium velocity distribution functions are measured throughout a one-second plasma pulse with a time resolution of 250 ms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Suprathermal electron transport studies in radio-frequency-heated tokamak plasmas

This contribution reports on the study of suprathermal electron radial transport enhancement in the presence of electron-heating radio-frequency waves, such as electron-cyclotron waves or lower-hybrid waves. Since suprathermal electrons emit hard X-rays from Bremsstrahlung, experimental data from hard X-ray measurements are used to follow their dynamics. In particular, electron-cyclotron power modulation experiments performed in TCV show that this transport depends on the total electron-cyclotron power. These results are corroborated by experimentally constrained Fokker-Planck simulations [J. Cazabonne et al, Plasma Phys. Control. Fusion 65, 104001 (2023)]. Similar experiments have been performed in WEST with lower-hybrid waves, and are reported for the first time. Preliminary analyses show potential evidence of suprathermal electron transport, but no clear dependence on wave power nor photon energy at this stage.

Cazabonne, Jean [CEA, IRFM, Saint Paul Lez Durance↗
DOE OSTI2022

Normalizing flows for likelihood-free inference with fusion simulations

Fluid-based scrape-off layer transport codes, such as UEDGE, are heavily utilized in tokamak analysis and design, but typically require user-specified anomalous transport coefficients to match experiments. Determining the uniqueness of these parameters and the uncertainties in them to match experiments can provide valuable insights to fusion scientists. Here, we leverage recent work in the area of likelihood-free inference (‘simulation-based inference’) to train a neural network, which enables accurate statistical inference of the anomalous transport coefficients given experimental plasma profile input. UEDGE is treated as a black-box simulator and runs multiple times with anomalous transport coefficients sampled from priors, and the neural network is trained on these simulations to emulate the posterior. The neural network is trained as a normalizing flow model for density estimation, allowing it to accurately represent complicated, high-dimensional distribution functions. With a fixed simulation budget, we compare a single-round procedure to a multi-round approach that guides the training simulations toward a specific target observation. Finally, we discuss the future possibilities for use of amortized models, which train on a wide range of simulations and enable fast statistical inference for results during experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Absolute Neutron Rate Measurement and Non-Thermal/Thermonuclear Fusion Differentiation

The goal of fusion energy is to produce significantly more energy from fusion reactions than is input into the device. One of the products of fusion reactions is neutrons, which, due to their lack of charge, provide a unique view into the parameters of the device. Lawrence Livermore National Laboratory (LLNL) in collaboration with the University of California, Berkeley (UCB) have designed, assembled, and fielded a robust and portable neutron detection system known as PANDA (Portable and Adaptable Neutron Diagnostics for ARPA-E). This detector suite consists of three LaBr activation detectors that are calibrated to give a total neutron yield on shot, and twenty-four scintillators coupled to photo-multiplier tubes (SPMT). The SPMTs can be configured to attain spatial, temporal and/or energy information from fusion neutrons. The system was designed to be portable and is compartmentalized so that individual components can be used at different fusion facilities. During the duration of this work, part of the system was installed at the FuZE facility, a part of Zap Energy. Another component was installed that the CESZAR facility at the University of California, San Diego (UCSD) to support experiments by Magneto-Inertial Fusion Technologies, Inc. (MIFTI). The diagnostics were successful at both locations and the LLNL/UCB team supported the data analysis by creating and running analysis scripts and Monte-Carlo calculations. At Zap Energy the diagnostics demonstrated that the fusion from the FuZE device is thermonuclear in nature, a result that resulted in an invited talk at the American Physical Society Division of Plasma Physics and an invited paper. Additionally, temporal and spatial data was taken using the SPMTs to understand the duration and length of fusion production. At UCSD the neutron yield from the diagnostics was used to show improvements to fusion yields on their gas puff Z-pinch when using a gas shell surrounding the fuel. The success in this diagnostic has led to continued work at both Zap Energy and MIFTI, as well as follow on funding and interest at other fusion energy companies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Neutron irradiation & thermomechanical experiment (NITE) - design

For the reliable long-term operation of fusion power plants, it is crucial to understand and predict the lifetime of materials in use. These materials include all structural and functional materials utilized at the first wall, blanket, magnets, and shielding. The key challenge is, that the harsh environment including high heat fluxes, high thermal stress and stress cycling, neutron irradiation, and sputtering on such materials should not be viewed separately. Currently, the synergistic loads cannot be evaluated experimentally because of the lack of adequate facilities. The purpose of that work is to design a synergetic Neutron Irradiation and Thermomechanical Experiment (NITE) for fusion materials. This design will leverage the existing Advanced-Test-Reactor (ATR), a fission reactor at the Idaho National Laboratory. We also acknowledge that with existing fission reactors the exact fusion condition cannot be created, and the limitations are critically discussed. The combination of neutron irradiation with a high heat flux is the focus. This is realized with an irradiation capsule design that includes a TRISO fueled region inside the capsule to enable a steady-state heat flux on one side of the specimen. In conclusion, the experimental design modeling showed that steady-state heat fluxes of 2.4 MW/m 2 with a thermal gradient of above 250°C can be achieved in a 5 mm thick specimen.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Lighting a Star on Earth—Again and Again

At Lawrence Livermore National Laboratory’s (LLNL) National Ignition Facility (NIF), scientists are learning what it takes to keep a fusion reaction burning. Their latest experiments, presented this week at the American Physical Society’s Division of Plasma Physics annual meeting, build on a series of successful ignition shots to reveal how capsule design and laser precision can sustain record-setting performance. At NIF, researchers are consistently producing plasmas dominated by self-heating from fusion reactions, achieving target gain greater than two — meaning the fusion output energy exceeds twice the energy used to initiate the reaction. Using the world’s most energetic laser to create these conditions, LLNL scientists can explore the detailed physics of ignition and burn that underpin the Laboratory’s stockpile modernization mission. “It’s a bit like lighting a campfire with a match and a single breath,” said LLNL physicist David Schlossberg, who is co-leading the work. “If you have too little fuel, it burns out quickly; too much, and it won’t light at all. We’ve found the balance between capsule mass and drive strength that starts the burn and keeps it going efficiently.” NIF is the only laboratory in the world to have achieved fusion ignition, a historic breakthrough first realized in December 2022. Since then, the facility has repeated ignition ten times, most recently in October 2025, demonstrating the robustness of the experimental platform and the reproducibility of ignition physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Bridging the gap between experiments and simulations using machine learning

The physics of inertial confinement fusion is rich and complex. Simulation codes that are used to design experiments are computationally expensive and lack the predictive capability required for extensive parameter exploration in search of a high-performing design for laser direct drive. In this work we use deep learning to build a fast emulator of experiments. To facilitate the development of the deep-learning model, an autoencoder is used to reduce the dimensionality of the input space. Two deep learning models are developed. One model is trained on a vast array of simulation data and is subsequently calibrated to expensive and limited experimental data using a technique known as “transfer learning.” The other model is trained on a statistical model and is subsequently calibrated using experimental data. A comparative study of the two predictive models is carried out. The models potentially reproduce key experimental observables with high accuracy and unprecedented inference times relative to those achieved with simulation codes. These models facilitate rapid exploration of a high dimensional input parameter space.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Instabilities and Mixing in Inertial Confinement Fusion

By imploding fuel of hydrogen isotopes, inertial confinement fusion (ICF) aims to create conditions that mimic those in the Sun's core. This is fluid dynamics in an extreme regime, with the ultimate goal of making nuclear fusion a viable clean energy source. The fuel must be reliably and symmetrically compressed to temperatures exceeding 100 million degrees Celsius. After the best part of a century of research, the foremost fusion milestone was reached in 2021, when ICF became the first technology to achieve an igniting fusion fuel (thermonuclear instability), and then in 2022 scientific energy breakeven was attained. A key trade-off of the ICF platform is that greater fuel compression leads to higher burn efficiency, but at the expense of amplified Rayleigh–Taylor and Richtmyer–Meshkov instabilities and kinetic-energy-wasting asymmetries. In extreme cases, these three-dimensional instabilities can completely break up the implosion. Even in the highest-yielding 2022 scientific breakeven experiment, high-atomic-number (high-Z) contaminants were unintentionally injected into the fuel. Here we review the pivotal role that fluid dynamics plays in the construction of a stable implosion and the decades of improved understanding and isolated experiments that have contributed to fusion ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Validation of implosion modeling through direct-drive shock timing experiments at the National Ignition Facility

Precise modeling of shocks in inertial confinement fusion implosions is critical for obtaining the desired compression in experiments. Shock velocities and post-shock conditions are determined by laser-energy deposition, heat conduction, and equations of state. This paper describes experiments at the National Ignition Facility (NIF) where multiple shocks are launched into a cone-in-shell target made of polystyrene, using laser pulse shapes with two or three pickets and varying on-target intensities. Shocks are diagnosed using the Velocity Interferometric System for Any Reflector diagnostic. Simulated and inferred shock velocities agree well for the range of intensities studied in this work. These results are the first shock-velocity measurements using direct drive on the NIF and provide a good measure of early-time, directly driven laser-energy coupling. Furthermore, the validated models add to the credibility of direct-drive-ignition designs at the megajoule scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Dynamic response of additively manufactured Ti–5Al–5V–5Mo–3Cr as a function of heat treatment

Both shock and shockless compression experiments were performed on laser powder bed fusion (LPBF) Ti–5Al–5V–5Mo–3Cr (Ti-5553) to peak compressive stresses near 15 GPa. Experiments were performed on the as-built material, containing a purely β (body centered cubic) microstructure, and two differing heat treatments resulting in a dual phase α (hexagonal close packed) and β microstructure. The Hugoniot, Hugoniot elastic limit (HEL), and spallation strength were measured and compared to wrought Ti-6Al-4V (Ti-64). The results indicate the LPBF Ti-5553 Hugoniot response is similar between heat treatments and to Ti-64. The HEL stress observed in the LPBF Ti-5553 was considerably higher than Ti-64, with the as-built, fully β alloy exhibiting the largest values. The spallation strength of the LPBF Ti-5553 was also similar to Ti-64. Clear evidence of initial porosity serving as initiation sites for spallation damage was observed when comparing computed tomography measurements before and after loading. Post-mortem scanning electron microscopy images of the recovered spallation samples showed no evidence of retained phase changes near the spall plane. The spall plane was found to have kinks aligned with the loading direction near areas with large concentrations of twin-like, crystallographic defects in the as-built condition. For the heat-treated samples, the concentrations of twin-like, crystallographic defects were absent, and no preference for failure at the interface between the α and β phases was observed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quasi-Coherent Fluctuations Limiting the Pedestal Growth on Alcator C-Mod: Experiment and Modeling

Performance predictions for future fusion devices rely on an accurate model of the pedestal structure. The leading candidate for predictive pedestal structure is EPED, and it is imperative to test the underlying hypotheses to further gain confidence for ITER projections. Here, we present experimental work testing one of the EPED hypotheses, namely the existence of a soft limit set by microinstabilities such as the kinetic ballooning mode (KBM). This work extends recent work on Alcator C-Mod [Diallo, et al., Phys. Rev. Lett., , (2014), 115001], to include detailed measurements of the edge fluctuations and comparisons of edge simulation codes and experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗