Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “functionally graded material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Modeling the Risk of Radiation-Induced Acute Esophagitis for Combined Washington University and RTOG Trial 93-11 Lung Cancer Patients

Purpose: To construct a maximally predictive model of the risk of severe acute esophagitis (AE) for patients who receive definitive radiation therapy (RT) for non-small-cell lung cancer. Methods and Materials: The dataset includes Washington University and RTOG 93-11 clinical trial data (events/patients: 120/374, WUSTL = 101/237, RTOG9311 = 19/137). Statistical model building was performed based on dosimetric and clinical parameters (patient age, sex, weight loss, pretreatment chemotherapy, concurrent chemotherapy, fraction size). A wide range of dose-volume parameters were extracted from dearchived treatment plans, including Dx, Vx, MOHx (mean of hottest x% volume), MOCx (mean of coldest x% volume), and gEUD (generalized equivalent uniform dose) values. Results: The most significant single parameters for predicting acute esophagitis (RTOG Grade 2 or greater) were MOH85, mean esophagus dose (MED), and V30. A superior-inferior weighted dose-center position was derived but not found to be significant. Fraction size was found to be significant on univariate logistic analysis (Spearman R = 0.421, p < 0.00001) but not multivariate logistic modeling. Cross-validation model building was used to determine that an optimal model size needed only two parameters (MOH85 and concurrent chemotherapy, robustly selected on bootstrap model-rebuilding). Mean esophagus dose (MED) is preferred instead of MOH85, as it gives nearly the same statistical performance and is easier to compute. AE risk is given as a logistic function of (0.0688 Asterisk-Operator MED+1.50 Asterisk-Operator ConChemo-3.13), where MED is in Gy and ConChemo is either 1 (yes) if concurrent chemotherapy was given, or 0 (no). This model correlates to the observed risk of AE with a Spearman coefficient of 0.629 (p < 0.000001). Conclusions: Multivariate statistical model building with cross-validation suggests that a two-variable logistic model based on mean dose and the use of concurrent chemotherapy robustly predicts acute esophagitis risk in combined-data WUSTL and RTOG 93-11 trial datasets.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

External Beam Radiation Therapy Enhances Local Control in Pigmented Villonodular Synovitis

Purpose: Pigmented villonodular synovitis (PVNS) is a rare proliferative disorder of the synovium with locally aggressive behavior. We reviewed our experience using radiation therapy in the treatment of PVNS. Materials and Methods: Seventeen patients with 18 sites of PVNS were treated with radiation between 1993 and 2007. Cases were retrospectively reviewed for patient information, treatment parameters, complications, and outcome. Seven sites were primary presentations and 11 were recurrent with an average of 2.5 prior surgical interventions. The most common location was the knee joint (67%). Cytoreductive surgery was performed before radiation therapy in 16/18 sites with all having proven or suspected residual disease. Radiation was delivered using 4-15 MV photons with an average total dose 34 Gy (range, 20-36 Gy). Seventeen of 18 sites (94%) had postradiotherapy imaging. Results: With average follow-up of 46 months (range, 8-181 months), initial local control was achieved in 75% (12/16) of the sites with prior cytoreductive surgery (mean time to recurrence, 38 months). Ultimate local control was 100% after repeat resection (mean follow-up, 61 months). Two additional sites without prior cytoreductive surgery showed growth after radiotherapy (mean time to documented growth, 10.5 months). Seventeen of the 18 involved joints (94%) were scored as excellent or good PVNS-related function, one site (5%) as fair function, and no site with poor function. No patient required amputation; and there were no Grade 3/4 treatment-related complications. Conclusion: Postoperative external beam radiation is effective in preventing disease recurrence and should be offered following maximal cytoreduction to enhance local control in PVNS.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

First-principles study of mechanical properties of zirconium alloys and hydrides

Zirconium alloys have been extensively used as fuel cladding materials in nuclear light water reactors (LWRs) due to their favorable mechanical properties, corrosion resistance, low thermal neutron capture cross section and criticality. Because the main functions of these structural materials are to maintain the integrity of UO{sub 2} fuel rods and prevent the release of fission products into the biosphere, a detailed knowledge of their structural stability is of critical importance to ensure the safe operation of nuclear reactors, and the safety of storage, transportation or disposition of used nuclear fuel assemblies. While the Zr-H phase diagram has been known since the 1950's and has remained largely unchanged, the structures, formation mechanisms, and stability of Zr-hydride phases in pure α-Zr or Zr alloys matrices have been subjects of much debate over the last few decades. The formation of hydride phases in the Zr matrix has been linked in previous studies to the degradation of mechanical properties of Zr/Zr-alloys materials. Therefore, an accurate knowledge of the interplay between the structures, stability and mechanical properties of Zr/Zr-alloys and Zr hydrides is of paramount significance to ensure materials reliability during their in- service lifetime. Despite few first-principles studies have investigated the mechanical stability of Zr hydrides polymorphs proposed so far, no ab initio studies have been carried out, to the best of our knowledge, on the mechanical properties of modern nuclear-grade zirconium alloys such as Zircaloy-4 (Zry-4; 1.2-1.7% Sn), Zirconium low oxidation alloy (ZIRLO; 0.7-1.0% Sn and ∼1.0% Nb), or M5 alloy (0.8-1.2% Nb). Therefore, it is important to carry out a series of first-principles calculations systematically to investigate the structure-property relationship of zirconium hydrides and zirconium alloys, that can help explain differences in elastic properties between high-purity zirconium and nuclear-grade zirconium alloys. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

AHTR Mechanical, Structural, And Neutronic Preconceptual Design

This report provides an overview of the mechanical, structural, and neutronic aspects of the Advanced High Temperature Reactor (AHTR) design concept. The AHTR is a design concept for a large output Fluoride salt cooled High-temperature Reactor (FHR) that is being developed to enable evaluation of the technology hurdles remaining to be overcome prior to FHRs becoming a commercial reactor class. This report documents the incremental AHTR design maturation performed over the past year and is focused on advancing the design concept to a level of a functional, self-consistent system. The AHTR employs plate type coated particle fuel assemblies with rapid, off-line refueling. Neutronic analysis of the core has confirmed the viability of a 6-month 2-batch cycle with 9 weight-percent enriched uranium fuel. Refueling is intended to be performed automatically under visual guidance using dedicated robotic manipulators. The present design intent is for used fuel to be stored inside of containment for at least 6 months and then transferred to local dry wells for intermediate term, on-site storage. The mechanical and structural concept development effort has included an emphasis on transportation and constructability to minimize construction costs and schedule. The design intent is that all components be factory fabricated into rail transportable modules that are assembled into subsystems at an on-site workshop prior to being lifted into position using a heavy-lift crane in an open-top style construction. While detailed accident identification and response sequence analysis has yet to be performed, the design concept incorporates multiple levels of radioactive material containment including fully passive responses to all identified design basis or non-very-low frequency beyond design basis accidents. Key building design elements include: 1) below grade siting to minimize vulnerability to aircraft impact, 2) multiple natural circulation decay heat rejection chimneys, 3) seismic base isolation, and 4) decay heat powered back-up electricity generation. The report provides a preconceptual design of the manipulators, the fuel transfer system, and the salt transfer loops. The mechanical handling of the fuel and how it is accomplished without instrumentation inside the salt is described within the report. All drives for the manipulators reside outside the reactor top flange. The design has also taken into account the transportability of major components and how they will be assembled on site

Varma, Venugopal Koikal↗

Rapid assessment of mid-infrared refractive index anisotropy using a prism coupler: chemical vapor deposited ZnS

A state-of-the-art mid-infrared prism coupler was used to study the refractive index properties of forward-looking-infrared (FLIR) grade zinc sulfide samples prepared with unique planar grain orientations and locations with respect to the CVD growth axis. This study was motivated by prior photoluminescence and x-ray diffraction measurements that suggested refractive index may vary according to grain orientation. Measurements were conducted to provide optical dispersion and thermal index (dn/dT) data at discrete laser wavelengths between 0.633 and 10.591 {mu}m at two temperature set points (30 C and 90 C). Refractive index measurements between samples exhibited an average standard deviation comparable to the uncertainty of the prism coupler measurement (0.0004 refractive index units), suggesting that the variation in refractive index as a function of planar grain orientation and CVD deposition time is negligible, and should have no impact on subsequent optical designs. Measured dispersion data at mid-infrared wavelengths was found to agree well with prior published measurements.

36 MATERIALS SCIENCE↗

Proton Therapy as Salvage Treatment for Local Relapse of Prostate Cancer Following Cryosurgery or High-Intensity Focused Ultrasound

Purpose: Local recurrence of prostate cancer after cryosurgery (CS) and high-intensity focused ultrasound (HIFU) is an emerging problem for which optimal management is unknown. Proton therapy (PT) may offer advantages over other local therapeutic options. This article reviews a single institution's experience using PT for salvage of local recurrent disease after HIFU or CS. Methods and Materials: We reviewed the medical records of 21 consecutive patients treated with salvage PT following a local recurrence of prostate cancer after CS (n=12) or HIFU (n=9) between January 2007 and July 2014. Patients were treated to a median dose of 74 Gy(relative biological effectiveness [RBE]; range: 74-82 Gy[RBE]) and 8 patients received androgen deprivation therapy with radiation therapy. Patients were evaluated for quality of life (QOL) by using the Expanded Prostate Index Composite questionnaire and toxicity by using Common Terminology Criteria for Adverse Events, version 3.0, weekly during treatment, every 6 months for 2 years after treatment, and then annually. Results: Median follow-up was 37 months (range: 6-95 months). The 3-year biochemical progression-free survival (bPFS) rate was 77%. The 3-year grade 3 toxicity rate was 17%; however, 2 of these patients had pre-existing grade 3 GU toxicities from their HIFU/CRYO prior to PT. At 1 year, bowel summary, urinary incontinence, and urinary obstructive QOL scores declined, but only the bowel QOL score at 12 months met the minimally important difference threshold. Conclusions: PT achieved a high rate of bPFS with acceptable toxicity and minimal changes in QOL scores compared with baseline pre-PT functions. Although most patients have done fairly well, the study size is small, follow-up is short, and early results suggest that outcomes with PT for salvage after HIFU or CS failure are inferior to outcomes with PT given in the de novo setting with respect to disease control, toxicity, and QOL.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Ruthenium nano-oxide layer in CoFe-Ru-CoFe trilayer system: An x-ray reflectivity study

A grazing incidence x-ray reflectivity technique is used to determine the electron density profile as a function of depth in CoFe-Ru-CoFe and CoFe-Ru nano-oxide layer (NOL)-CoFe trilayers. Four trilayers with ruthenium thicknesses of 8, 8.5, and 9 A and one with Ru 8.5 A NOL, prepared by a dc planetary sputtering system, were investigated. For all samples, the electron density profile (EDP) shows a central peak that is related to the Ru layer. Natural oxidation in all of the samples introduces a graded EDP of the top CoFe layers, which decreases gradually to zero. The large surface resistivity of Ru 8.5 A NOL as compared to Ru 8.5 A is related to the remarkable difference between their EDPs. EDP changes have also been investigated in Ru NOL trilayers after annealing at 280 deg. C. The Ru phase in the EDP was observed to confirm the thermal stability of the spacer layer after annealing.

36 MATERIALS SCIENCE↗

Optimization of Micro Metal Injection Molding By Using Grey Relational Grade

Micro metal injection molding ({mu}MIM) which is a variant of MIM process is a promising method towards near net-shape of metallic micro components of complex geometry. In this paper, {mu}MIM is applied to produce 316L stainless steel micro components. Due to highly stringent characteristic of {mu}MIM properties, the study has been emphasized on optimization of process parameter where Taguchi method associated with Grey Relational Analysis (GRA) will be implemented as it represents novel approach towards investigation of multiple performance characteristics. Basic idea of GRA is to find a grey relational grade (GRG) which can be used for the optimization conversion from multi objectives case which are density and strength to a single objective case. After considering the form 'the larger the better', results show that the injection time(D) is the most significant followed by injection pressure(A), holding time(E), mold temperature(C) and injection temperature(B). Analysis of variance (ANOVA) is also employed to strengthen the significant of each parameter involved in this study.

36 MATERIALS SCIENCE↗

Malignant Gastroduodenal Obstruction: Treatment with Self-Expanding Uncovered Wallstent

Purpose: To retrospectively evaluate the clinical effectiveness of a self-expanding uncovered Wallstent in patients with malignant gastroduodenal obstruction. Materials and Methods: Under combined endoscopic and fluoroscopic guidance, 29 patients with a malignant gastroduodenal stenosis were treated with a self-expanding uncovered metallic Wallstent. A dysphagia score was assessed before and after the intervention to measure the success of this palliative therapy. The dysphagia score ranged between grade 0 to grade 4: grade 0 = able to tolerate solid food, grade 1 = able to tolerate soft food, grade 2 = able to tolerate thick liquids, grade 3 = able to tolerate water or clear fluids, and grade 4 = unable to tolerate anything perorally. Stent patency and patients survival rates were calculated. Results: The insertion of the gastroduodenal stent was technically successful in 28 patients (96.5%). After stenting, 25 patients (86.2%) showed clinical improvement by at least one score point. During follow-up, 22 (78.5%) of 28 patients showed no stent occlusion until death and did not have to undergo any further intervention. In six patients (20.6%), all of whom were treated with secondary stent insertions, occlusion with tumor ingrowth and/or overgrowth was observed after the intervention. The median period of primary stent patency in our study was 240 days. Conclusion: Placement of an uncovered Wallstent is clinically effective in patients with malignant gastroduodenal obstruction. Stent placement is associated with high technical success, good palliation effect, and high durability of stent function.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Frictional interactions at high velocity ductile metal interfaces

We have examined the effect of evolution of grain morphology on the frictional force at polycrystalline Al-Al and Al-Ta interfaces as a function of grain size and sliding velocity. We present the results of 8M, 26M and 138M particle NonEquilibrium Molecular Dynamics (NEMD) simulations for grain sizes of 13 and 20 nm. Sample sizes consisted of 3×3×3 and 5×5×5 grains on each side of a sliding interface. We have considered sliding velocities from 20 to 4000 m/s. For velocities below a size dependent critical velocity above which a fluid layer forms, we find enhanced grain coarsening leading to a highly strained, graded final steady state microstructure that exhibits a dynamic morphology for times greater than 5-10 ns. We find that the frictional force is insensitive to the initial grain size distribution due to the evolution of the initial distribution to a new nonequilibrium steady state. We discuss the relationship of these results to single crystal interfaces and the mechanisms for grain size and shape evolution.

36 MATERIALS SCIENCE↗

Cervical Lymph Node Metastases From Unknown Primary Cancer: A Single-Institution Experience With Intensity-Modulated Radiotherapy

Purpose: To determine the effectiveness and rate of complications of intensity-modulated radiotherapy (IMRT) in the treatment of cervical lymph node metastases from unknown primary cancer. Methods and Materials: Between February 2005 and November 2008, 25 patients with an unknown primary cancer underwent IMRT, with a median radiation dose of 70 Gy. The bilateral neck and ipsilateral putative pharyngeal mucosa were included in the target volume. All patients had squamous cell carcinoma, except for 1 patient who had adenosquamous differentiation. They were all treated with curative intent. Of the 25 included patients, 20 were men and 5 were women, with a median age of 54 years. Of these patients, 3 had Stage III, 18 had Stage IVa, and 4 had Stage IVb. Of the 25 patients, 18 (72%) received platinum-based chemotherapy in a combined-modality setting. Neck dissection was reserved for residual disease after definitive IMRT. Overall survival, disease-free survival, and locoregional control were calculated using the Kaplan-Meier method. Results: With a median follow-up of 38 months, the overall survival, disease-free survival, and locoregional control rates were all 100% at 3 years. No occurrence of primary cancer was observed during the follow-up period. The reported rates of xerostomia reduced with the interval from the completion of treatment. Nine patients (36%) reported Grade 2 or greater xerostomia at 6 months, and only 2 (8%) of them reported the same grade of salivary function toxicity after 24 months of follow-up. Conclusion: In our institution, IMRT for unknown primary cancer has provided good overall and disease-free survival in all the patients with an acceptable rate of complications. IMRT allowed us to address the bilateral neck and ipsilateral putative pharyngeal mucosa with minimal late salivary function toxicity. The use of concurrent chemotherapy and IMRT for more advanced disease led to good clinical results with reasonable toxicities.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Consideration of Decabromodiphenyl Ether Flame Retardant in Thermal and Radiation Aging of Crosslinked Polyethylene Cable Insulation

Decabromodiphenyl ether (decaBDE) has been used as a flame-retardant additive in nuclear-grade electrical cable insulation. However, decaBDE has been identified as a persistent, bioaccumulative and toxic (PBT) substance, leading to regulatory scrutiny. On January 6, 2021, the Environmental Protection Agency (EPA) published a final rule to phase out decaBDE. The 2021 rule set a two-year compliance deadline for “processing and distribution in commerce of decaBDE for use in wire and cable insulation in nuclear power generation facilities.” In recognition of industry concerns following a sudden discontinuation of decaBDE-containing Class 1E wire and cable essential for nuclear power operations and the time needed for qualifying the individual components using the alternative insulation technology, an extended compliance deadline was set in the finalized amendments to the 2021 rule as published by the Environmental Appeals Board on November 12, 2024. The 2024 rule set the compliance deadline for processing and distributing decaBDE-containing wire and cable insulation until the end of the service life of these materials. Since decaBDE has long been relied upon as the flame retardant in one of the most common cross-linked polyethylene (XLPE) nuclear cable insulation formulations, RSCC Firewall III insulation, questions have naturally arisen regarding whether changes in cable performance might be expected for XLPE containing a decaBDE alternative, especially for safety-related cables that must perform their safety function in a design basis event such as a loss of coolant accident.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Boron Neutron Capture Therapy in the Treatment of Recurrent Laryngeal Cancer

Purpose: To investigate the safety and efficacy of boron neutron capture therapy (BNCT) as a larynx-preserving treatment option for patients with recurrent laryngeal cancer. Methods and Materials: Six patients with locally recurrent squamous cell laryngeal carcinoma and 3 patients with persistent laryngeal cancer after prior treatment were treated with BNCT at the FiR1 facility (Espoo, Finland) in 2006 to 2012. The patients had received prior radiation therapy with or without concomitant chemotherapy to a cumulative median dose of 66 Gy. The median tumor diameter was 2.9 cm (range, 1.4-10.9 cm) before BNCT. Boron neutron capture therapy was offered on a compassionate basis to patients who either refused laryngectomy (n=7) or had an inoperable tumor (n=2). Boronophenylalanine-fructose (400 mg/kg) was used as the boron carrier and was infused over 2 hours intravenously before neutron irradiation. Results: Six patients received BNCT once and 3 twice. The estimated average gross tumor volume dose ranged from 22 to 38 Gy (W) (mean; 29 Gy [W]). Six of the 8 evaluable patients responded to BNCT; 2 achieved complete and 4 partial response. One patient died early and was not evaluable for response. Most common side effects were stomatitis, fatigue, and oral pain. No life-threatening or grade 4 toxicity was observed. The median time to progression within the target volume was 6.6 months, and the median overall survival time 13.3 months after BNCT. One patient with complete response is alive and disease-free with a functioning larynx 60 months after BNCT. Conclusions: Boron neutron capture therapy given after prior external beam radiation therapy is well tolerated. Most patients responded to BNCT, but long-term survival with larynx preservation was infrequent owing to cancer progression. Selected patients with recurrent laryngeal cancer may benefit from BNCT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Tumor suppressor, AT motif binding factor 1 (ATBF1), translocates to the nucleus with runt domain transcription factor 3 (RUNX3) in response to TGF-{beta} signal transduction

Research highlights: {yields} Significant correlation between ATBF1 and RUNX3 nuclear localization in gastric cancer. {yields} Co-IP reveals a physical association between ATBF1 and RUNX3. {yields} ATBF1 and RUNX3 up-regulates p21 promoter activity synergistically. {yields} TGF-{beta}1 induces endogenous ATBF1 and RUNX3 nuclear translocation. -- Abstract: Background and aims: AT motif binding factor 1 (ATBF1), a homeotic transcription factor, was identified as a tumor suppressor, and loss of heterozygosity at ATBF1 locus occurs frequently in gastric cancers. We previously showed that ATBF1 expression inversely correlated with the malignant character of gastric cancer and that ATBF1 enhanced the promoter activity of p21{sup Waf1/Cip1}. We also found that ATBF1 moves between cytoplasm and nucleus, but the precise mechanism of translocation is unknown. In this study, we investigated the mechanism of ATBF1 translocation to the nucleus with the runt domain transcription factor 3 (RUNX3) in cooperation with TGF-{beta} signal transduction. Materials and methods: To analyze the expression of ATBF1 and RUNX3 in gastric cancer cells, we performed immunohistochemistry on 98 resected gastric cancer tissue samples and scored the nuclear staining intensity as grade 0 to grade 5. Co-immunoprecipitation (co-IP) of ATBF1 and RUNX3 was performed. Dual luciferase assays were performed by transfecting ATBF1 and RUNX3 with a p21{sup Waf1/Cip1} reporter vector. To investigate the nuclear translocation of endogenous ATBF1 and RUNX3 in response to TGF-{beta} signal, we examined the subcellular localization of ATBF1 and RUNX3 in gastric cancer cells treated with recombinant TGF-{beta}1 using confocal laser scanning microscopy. Results: Strong immunohistochemical nuclear staining of ATBF1 was observed in 37 (37.8%) of the gastric cancer tissue samples, and RUNX3 nuclear staining was observed in 15 (15.3%). There was a statistically significant correlation between ATBF1 and RUNX3 nuclear localization (rs = 0.433, p < 0.001). Co-IP revealed a physical association between ATBF1 and RUNX3. ATBF1 and RUNX3 up-regulated p21{sup Waf1/Cip1} promoter activity synergistically. In SNU16 gastric cancer cells, ATBF1 and RUNX3 were cytoplasmic before TGF-{beta}1 stimulation, but after 24 h of TGF-{beta}1 stimulation, endogenous ATBF1 and RUNX3 translocated to the nucleus. Conclusion: ATBF1 associates with RUNX3 and translocates to the nucleus in response to TGF-{beta} signal transduction and might function in the nucleus as tumor suppressor and transcriptional regulator.

60 APPLIED LIFE SCIENCES↗

Organ Preservation With Daily Concurrent Chemoradiotherapy Using Superselective Intra-Arterial Infusion via a Superficial Temporal Artery for T3 and T4 Head and Neck Cancer

Purpose: To evaluate the therapeutic results and rate of organ preservation in patients with advanced head and neck cancer treated with superselective intra-arterial chemotherapy via a superficial temporal artery and daily concurrent radiotherapy. Methods and Materials: Between April 2002 and March 2006, 30 patients with T3 or T4a squamous cell carcinoma of the head and neck underwent intra-arterial chemoradiotherapy. Treatment consisted of superselective intra-arterial infusions (docetaxel, total 60 mg/m{sup 2}; cisplatin, total 150 mg/m{sup 2}) and daily concurrent radiotherapy (total, 60 Gy) for 6 weeks. Results: The median follow-up for all patients was 46.2 months (range, 10-90 months). The median follow-up for living patients was 49.7 months (range, 36-90 months). After intra-arterial chemoradiotherapy was administered, primary site complete response was achieved in 30 (100%) of 30 cases. Seven patients (23.3%) died. Using the Kaplan-Meier method, 1-year, 3-year, and 5-year survival rates were 96.7%, 83.1%, and 70.2%, respectively, while 1-year, 3-year, and 5-year local control rates were 83.3%, 79.7%, and 73.0%, respectively. Grade 3 or 4 mucositis occurred in 20 cases (66.7%). Grade 3 toxicities included dysphagia in 20 cases (66.7%), dermatitis in 6 cases (20%), nausea/vomiting in 2 cases (6.7%), and neutropenia and thrombocytopenia in 1 case (3.3%). No osteoradionecrosis of mandible and maxillary bones developed during follow-up. Conclusions: Intra-arterial chemoradiotherapy using a superficial temporal artery provided good overall survival and local control rates. This combination chemoradiotherapy approach can preserve organs and minimize functional disturbance, thus contributing to patients' quality of life.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Review Article: Stress in thin films and coatings: Current status, challenges, and prospects

The issue of stress in thin films and functional coatings is a persistent problem in materials science and technology that has congregated many efforts, both from experimental and fundamental points of view, to get a better understanding on how to deal with, how to tailor, and how to manage stress in many areas of applications. With the miniaturization of device components, the quest for increasingly complex film architectures and multiphase systems and the continuous demands for enhanced performance, there is a need toward the reliable assessment of stress on a submicron scale from spatially resolved techniques. Also, the stress evolution during film and coating synthesis using physical vapor deposition (PVD), chemical vapor deposition, plasma enhanced chemical vapor deposition (PECVD), and related processes is the result of many interrelated factors and competing stress sources so that the task to provide a unified picture and a comprehensive model from the vast amount of stress data remains very challenging. This article summarizes the recent advances, challenges, and prospects of both fundamental and applied aspects of stress in thin films and engineering coatings and systems, based on recent achievements presented during the 2016 Stress Workshop entitled “Stress Evolution in Thin Films and Coatings: from Fundamental Understanding to Control.” Evaluation methods, implying wafer curvature, x-ray diffraction, or focused ion beam removal techniques, are reviewed. Selected examples of stress evolution in elemental and alloyed systems, graded layers, and multilayer-stacks as well as amorphous films deposited using a variety of PVD and PECVD techniques are highlighted. Based on mechanisms uncovered by in situ and real-time diagnostics, a kinetic model is outlined that is capable of reproducing the dependence of intrinsic (growth) stress on the grain size, growth rate, and deposited energy. The problems and solutions related to stress in the context of optical coatings, inorganic coatings on plastic substrates, and tribological coatings for aerospace applications are critically examined. This review also suggests strategies to mitigate excessive stress levels from novel coating synthesis perspectives to microstructural design approaches, including the ability to empower crack-based fabrication processes, pathways leading to stress relaxation and compensation, as well as management of the film and coating growth conditions with respect to energetic ion bombardment. Future opportunities and challenges for stress engineering and stress modeling are considered and outlined.

36 MATERIALS SCIENCE↗

Common Variants of GSTP1, GSTA1, and TGF{beta}1 are Associated With the Risk of Radiation-Induced Fibrosis in Breast Cancer Patients

Purpose: To provide new insights into the genetic basis of normal tissue radiosensitivity, we evaluated the association between eight polymorphic variants located in six genes related to DNA repair mechanisms, oxidative stress, and fibroblast proliferation (XRCC1 Arg399Gln, XRCC1 Arg194Trp, TP53 Arg72Pro, GSTP1 Ile105Val, GSTA1 C-69T, eNOS G894T, TGF{beta}1 C-509T, and TGF{beta}1 T869C) and the risk of subcutaneous fibrosis in a retrospective series of patients who received radiotherapy after breast-conserving surgery. Methods and Materials: Subcutaneous fibrosis was scored according to the Late Effects of Normal Tissue-Subjective Objective Management Analytical scale in 257 breast cancer patients who underwent surgery plus adjuvant radiotherapy. Genotyping was conducted by polymerase chain reaction-restriction fragment length polymorphism analysis on genomic DNA extracted from peripheral blood. The association between genetic variants and the risk of moderate to severe fibrosis was evaluated by binary logistic regression analysis. Results: Two hundred thirty-seven patients were available for the analysis. Among them, 41 patients (17.3%) developed moderate to severe fibrosis (Grade 2-3), and 196 (82.7%) patients displayed no or minimal fibrotic reactions (Grade 0-1). After adjustment of confounding factors, GSTP1 Ile105Val (odds ratio [OR] 2.756; 95% CI, 1.188-6.393; p = 0.018), GSTA1 C-69T (OR 3.223; 95% CI, 1.176-8.826; p = 0.022), and TGF{beta}1 T869C (OR 0.295; 95% CI, 0.090-0.964; p = 0.043) polymorphisms were found to be significantly associated with the risk of Grade 2-3 radiation-induced fibrosis. In the combined analysis, carriers of three risk genotypes were found to be at higher odds for the development of Grade 2-3 fibrosis than were patients with two risk genotypes (OR 4.415; 95% CI, 1.553-12.551, p = 0.005) or with no or one risk genotype (OR 8.563; 95% CI, 2.671-27.447; p = 0.0003). Conclusions: These results suggest that functional variations in genes involved in oxidative stress response and fibroblast proliferation may modulate the development of radiation-induced fibrosis in breast cancer patients. The results of the combined analysis support the notion that approaches based on the combination of different genetic markers have the potential to predict normal tissue responses.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Long-Term Results of Conformal Radiotherapy for Progressive Airway Amyloidosis

Purpose: To evaluate the efficacy of conformal external beam radiotherapy (RT) for local control of progressive airway amyloidosis. Methods and Materials: We conducted a retrospective review of patients with biopsy-proven progressive airway amyloidosis treated with conformal RT between 2000 and 2006 at Boston Medical Center. The patients were evaluated for performance status and pulmonary function, with computed tomography and endoscopy after RT compared with the pretreatment studies. Local control was defined as the lack of progression of airway wall thickening on computed tomography imaging and stable endobronchial deposits by endoscopy. Results: A total of 10 symptomatic airway amyloidosis patients (3 laryngeal and 7 tracheobronchial) received RT to a median total dose of 20 Gy in 10 fractions within 2 weeks. At a median follow-up of 6.7 years (range, 1.5-10.3), 8 of the 10 patients had local control. The remaining 2 patients underwent repeat RT 6 and 8.4 months after initial RT, 1 for persistent bronchial obstruction and 1 for progression of subglottic amyloid disease with subsequent disease control. The Eastern Cooperative Oncology Group performance status improved at a median of 18 months after RT compared with the baseline values, from a median score of 2 to a median of 1 (p = .035). Airflow (forced expiratory volume in 1 second) measurements increased compared with the baseline values at each follow-up evaluation, reaching a 10.7% increase (p = .087) at the last testing (median duration, 64.8 months). Acute toxicity was limited to Grade 1-2 esophagitis, occurring in 40% of patients. No late toxicity was observed. Conclusions: RT prevented progressive amyloid deposition in 8 of 10 patients, resulting in a marginally increased forced expiratory volume in 1 second, and improved functional capacity, without late morbidity.

62 RADIOLOGY AND NUCLEAR MEDICINE↗