Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fuel recycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Parameter dependencies of the separatrix density in low triangularity L-mode and H-mode JET-ILW plasmas

Abstract The midplane electron separatrix density, n e,sep , in JET-ILW L-mode and H-mode low triangularity deuterium fuelled plasmas exhibits a strong explicit dependence on the averaged outer divertor target electron temperature, n e,sep ∼ T e,ot −1/2 . This dependence is reproduced by analytic reversed two point model (rev-2PM), and arises from parallel pressure balance, as well as the ratio of the power and momentum volumetric loss factors, (1 − f cooling )/(1 − f mom-loss ). Quantifying the influence of the (1 − f cooling ) and (1 − f mom-loss ) loss factors on n e,sep has been enabled by measurement estimates of these quantities from L-mode density (fueling) ramps in the outer horizontal, VH(C), and vertical target, VV, divertor configurations. Rev-2PM n e,sep estimates from the extended H-mode and more limited L-mode datasets are recovered to within ±25% of the measurements, with a scaling factor applied to account for use of T e,ot , an averaged quantity, rather than flux tube resolved target values. Both the (1 − f cooling ) and (1 − f mom-loss ) trends and recovery of n e,sep using the rev-2PM formatting are reproduced in EDGE2D-EIRENE L-mode-like and H-mode-like density scan simulations. The general lack of a divertor configuration effect in the JET-ILW n e,sep trends can be attributed to a significant influence of main chamber recycling, which has been shown in the EDGE2D-EIRENE results to moderate n e,sep with respect to changes in divertor neutral leakage imposed by changes in the divertor configuration. The unified n e,sep vs T e,ot trends can, however, be broken if large modifications to the divertor geometry (e.g. complete removal of the outer divertor baffle structure) are introduced in the model. The more pronounced high-field side high density region formation in the VH(C) configuration with reduced clearance to the separatrix does not appear to have a significant influence on the outer midplane separatrix and pedestal parameters when mapped to T e,ot , although conditions at the inner midplane could not be assessed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2019

Powering OSCAR

Recycling waste has been an issue on Earth for decades. The OSCAR project seeks to find ways to make sure that it does not become an issue in space. The main focus of OSCAR is the combustion of waste and reclamation of gaseous products in microgravity. The first phase of testing relies on a ground rig that operates both under normal (Earth) gravity and in drop tower tests that briefly simulate a microgravity environment. In the second phase, a test will be performed during a suborbital flight were the experiment will be carried out in microgravity. Throughout the spring term, interns have played an integral part in continuing the progress made by the project. They performed work in upgrading the electrical and mechanical systems that make up OSCAR. They made multiple improvements to the test rig's operating software to improve readability and usability. They prepared and edited documents that were vital to the engineering process. And, they were responsible for performing lab tests and refining the lab operations document and procedure. The interns were a big help in maintaining the rigorous test schedule. OSCAR, which stands for Orbital Syngas Commodity Augmentation Reactor, is to find a way to turn astronaut waste into chemical energy. The two parts of this are important: finding a way to dispose of waste generated in space, and seeing if there is a way to recycle that waste into chemical energy. The importance of the disposal aspect is that there is currently no way to dispose of, or recycle, waste that is created in space other than jettisoning it (which is what the ISS does via empty supply capsules). As manned missions go deeper into space, that method will no longer be viable, as a craft would essentially be littering the space and planets that they visit. Energy reclamation is also important because of the high monetary and spatial costs of sending supplies on space missions. Every little bit extra that can be reused out of what is sent can save room and funds for other supplies. The facet of this problem that the OSCAR project is focusing on is how to combust waste in zero gravity. Combustion in the presence of gravity is one of those things that is taken for granted. When something burns on Earth, the flames rise above the fuel as oxygen flows from underneath. In microgravity, the flames surround the object completely, which restricts the amount of oxygen that can reach the fuel, and retards the combustion. OSCAR uses a vortex reaction chamber to counter this phenomenon. The OSCAR test rig will eventually be tested on a suborbital flight to see if it is an effective solution to the issue in real-world conditions. Currently, there is a prototype test rig that is fully functional. This rig has been previously tested in a 2 second drop test at Glenn Research Center’s (GRC) Zero Gravity Facility (ZGF). (The free-fall conditions of the drop mimic microgravity, if only for a brief period of time). This session’s focus was on upgrading the test rig and software, updating the paperwork, performing additional lab tests, and readying the rig for the five second drop test, again at GRC. II. Upgrades The state of the testing rig at the start of the session was in between its configurations for the two second drop tower and the five second drop tower. The rig needed upgrades to address various insufficiencies that either were discovered during the two second campaign or were a direct result of the differences between the two drop tower setups. The main differences that had to be handled were the increase in shock loads from 30g to 65g, a difference in drop indicating signal (on the falling edge of a pulse instead of a change from high to low), and the ambient pressure of the test apparatus (the two second tower dropped the rig in atmosphere, while the five second tower drops in vacuum).

Cauvel, Thomas↗
DOE OSTI2022

Synthesis and Analysis of Performance-Advantaged Bioproducts

Performance-advantaged bioproducts (PABPs) are "novel products where the bio-based product does not resemble an existing petroleum-derived molecule but offers a performance advantage over existing products" (Fitzgerald, Bailey 2018). PABPs are an exciting area with near-term potential to accelerate the bioeconomy. We focus on synthesis, characterization, and economic and sustainability analyses for PABPs, aiming to leverage the inherent chemical functionality of molecules from carbohydrates and lignin via chemical and biological transformations. We collaborate with other BETO projects to source new molecules. Our work is integrated with the Inverse Design project, which provides computational predictions for PABPs and first principles-based results to explain observed properties. Primary outcomes include 1) a Nature Reviews Materials paper that establishes PABP design principles, 2) PA nylons from beta-ketoadipic acid, 3) new recyclable thermosets from bio-aromatic amines, 4) new PA plasticizers that are less toxic, and 5) the experimental validation of a machine learning tool, PolyML, from the Inverse Design project. Going forward, we are working towards an integrated framework to dramatically narrow PABP design space and a materials flow analysis of commodity chemicals as a benchmark for PABPs. Our main challenges are in the sourcing of new molecules that are not commercially available and the need for comprehensive characterizations and scale-up for technology transfer.

BIOMASS FUELS↗
DOE OSTI2023

Unfounded concerns about photovoltaic module toxicity and waste are slowing decarbonization

Unsubstantiated claims that fuel growing public concern over the toxicity of photovoltaic modules and their waste are slowing their deployment. Clarifying these issues will help to facilitate the decarbonization that our world depends on. Harnessing the potential of photovoltaic (PV) electricity generation is a key part of the transition to less carbon-intensive energy sources. The most recent energy production forecasts call for a massive 75 TW of global PV capacity by 2050 to have a chance of limiting global temperature rise to 1.5 °C and minimizing the impacts of climate change. This is more than a tenfold increase in the current manufacturing and deployment rate in less than 15 years. PV modules are new to many people, so increasing PV deployment has led to growing concerns about the quantity of waste that may arise from decommissioning them (if they are not recycled), and their potential to leach toxic metals. In conclusion, debunking misinformation about PV modules and PV module waste is the first step in addressing these concerns that are unnecessarily slowing PV deployment.

14 SOLAR ENERGY↗
DOE OSTI2025

Thermomechanical Separation of Biogenic and Non-biogenic Carbon from Non-Recyclable MSW

The effective separation of biogenic and non-biogenic carbon from non-recyclable municipal solid waste (n-MSW) presents a significant challenge in the United States. Currently, there are no efficient methods available to address this issue, hindering the potential for maximizing waste utilization and reducing landfilling rates. This project aims to develop and implement a combine thermomechanical separation techniques to separate biogenic and non-biogenic carbon within n-MSW, ultimately facilitating greater resource recovery and enhancing the efficiency and environmental impact of waste management practices.

09 - BIOMASS FUELS↗
DOE OSTI2024

Impacts of Neodymium Complexation on Radiolysis of Tetramethyl Diglycolamide (TMDGA) in Aqueous Solutions

Hydrophilic diglycolamides (DGA) ligands have been explored for use as stripping agents in various lanthanide and actinide partitioning processes.1 The separation of lanthanide fission products and transplutonic actinides can serve multifaceted advantages, in that the separation of neutron poisoning rare earth element (REE) fission products from the minor actinides in used nuclear fuel (UNF) can be mutually beneficial to the fundamental research behind REE separations and UNF separations. Considerable efforts have been devoted to understanding the radiation chemistry of hydrophilic DGAs. However, recent studies with lipophilic DGAs have shown that metal ion complexation can promote significant changes in their radiolytic susceptibility.2,3 These effects have been attributed to various parameters, including delocalization of electron density, the presence of radiolytically more susceptible counter ions, and steric hindrance. As such, it is pivotal for these complexation effects to be more thoroughly probed to establish mechanistic knowledge for their effects on hydrophilic DGA molecules. Here we present a time-resolved electron pulse and accumulated gamma dose irradiation study on neodymium ion complexes of tetramethyl diglycolamide (TMDGA) under aqueous solution conditions. References (1) Rostaing, C.; Poinssot, C.; Warin, D.; Baron, P.; Lorrain, B. Development and Validation of the EXAm Separation Process for Single Am Recycling. Procedia Chem. 2012, 7, 367–373. https://doi.org/doi: 10.1016/j.proche.2012.10.057. (2) Horne, G. P.; Conrad, J. K.; McLachlan, J. R.; Rotermund, B. M.; Cook, A. R.; Celis-Barros, C.; Mezyk, S. P. Impact of Lanthanide Complexation and Temperature on the Chemical Reactivity of N,N,N’,N’-Tetraoctyl Diglycolamide (TODGA) with the Dodecane Radical Cation. Phys. Chem. Chem. Phys. 2023, Under Review. (3) Kimberlin, A.; Saint-Louis, G.; Guillaumont, D.; Camès, B.; Guilbaud, P.; Berthon, L. Effect of Metal Complexation on Diglycolamide Radiolysis: A Comparison between Ex Situ Gamma and in Situ Alpha Irradiation. Phys. Chem. Chem. Phys. PCCP 2022, 24 (16), 9213–9228. https://doi.org/10.1039/d1cp05731f.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Layered Double Hydroxide Derivatives for Polyolefin Upcycling

While Ru-catalyzed hydrogenolysis holds significant promise in converting waste polyolefins into value-added alkane fuels, a major constraint is the high cost of noble metal catalysts. Here, in this work, we propose, for the first time, that Co-based catalysts derived from CoAl-layered double hydroxide (LDH) are alternatives for efficient polyolefin hydrogenolysis. Leveraging the chemical flexibility of the LDH platform, we reveal that metallic Co species serve as highly efficient active sites for polyolefin hydrogenolysis. Furthermore, we introduced Ni into the Co framework to tackle the issue of restricted hydrogenation ability associated with contiguous Co-Co sites. In-situ analysis indicates that the integration of Ni induces electron transfer and facilitates hydrogen spillover. This dual effect synergistically enhances the hydrogenation/desorption of olefin intermediates, resulting in a significant reduction in the yield of low-value CH 4 from 27.1 to 12.6%. Through leveraging the unique properties of LDH, we have developed efficient and cost-effective catalysts for the sustainable recycling and valorization of waste polyolefin materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pollution to products: recycling of ‘above ground’ carbon by gas fermentation

Climate crisis and rapid population growth are posing some of the most pressing challenges to mankind and have intensified the need for the deployment of carbon recycling and carbon capture and utilization (CCU) technologies. Gas fermentation offers a solution using carbon-fixing chemolithoautotrophic microorganisms. After a decade of scale up, the technology has recently been commercialized with the first plant operating successfully since 2018 and additional units under construction. Gas fermentation offers unique feedstock and product flexibility when compared to other available gas-to-liquid technologies. Advancements in process technology and synthetic biology enable a broad range of feedstocks including emissions from industry or syngas generated from any biomass resource to be converted into a wide range of molecules realizing a circular economy.

09 BIOMASS FUELS↗
DOE OSTI2020

Dehalogenation of electrochemical processing salt simulants with ammonium phosphates and immobilization of salt cations in an iron phosphate glass waste form

This study demonstrates the conversion of simulated pyroprocessing salt wastes [i.e., ER(SF) and ERV2] into chemically durable iron phosphate glass waste forms through reactions with ammonium hydrogen phosphate precursors [i.e., NH4H2PO4 and (NH4)2HPO4] and added Fe2O3. The reaction of the salt simulants with the phosphate precursors resulted in dehalogenation of the salt through the production of NH4Cl and NH4I (along with water), of which the NH4Cl can be used to produce UCl3 oxidant for use in the electrorefiner during pyroprocessing. These iron phosphate glasses contain a notably higher waste loading than the baseline glass-bonded sodalite ceramic waste form, which requires about 70 vol% sodalite to accommodate Cl from the salt, because they are dehalogenated prior to vitrification. The high waste loadings coupled with higher bulk densities (~3×103 kg/m3) than glass-bonded sodalite (~2.3×103 kg/m3) mean that these glasses have a higher storage volume, i.e., the volume required to immobilize a given mass of waste. The iron phosphate glass waste forms were characterized using a variety of techniques including physical property measurements and chemical durability testing. Following initial testing, a proof-of-concept demonstration was conducted to show that the NH4Cl generated from this process could be used to produce UCl3 using depleted uranium dendrites as a feedstock.

phosphate glass, pyroprocessing, waste forms, salt↗
DOE OSTI2024

A Step toward Process Electrification: Microwave-Assisted Co-Gasification of Waste Plastics and Biomass to Produce Clean Energy

Barely 9% of the 353 million metric tons of plastic waste produced worldwide over the last two decades has been recycled, with the majority of it being either landfilled or incinerated. Recycling and upcycling plastic waste is thus essential in mitigating environmental pollution. Gasification is the thermochemical conversion of solid carbon feedstock at high temperatures using a gasifying agent to produce hydrogen-rich syngas. Existing gasification technologies are energy-intensive and require high operating temperatures (>1000 °C), leaving them uncommercial. Microwave heating has sparked attention in a variety of chemical processes due to its specific advantages over traditional heating technologies, such as rapid and selective heating to improve process efficiency. NETL’s research team recently investigated the synergistic advantages of corn stover and mixed plastics in producing hydrogen-rich syngas via microwave heating. As a continuation of the research, this study provides an outlook over the non-catalytic versus catalytic effects of plastic-corn stover gasification via process electrification to enhance H2 production, minimize undesired tar, and improve process efficiency. Our aim is to provide complete electrification of the existing gasification process by using waste plastics as a starting block to produce valuable fuel and support the nation’s net zero goals.

Abedin, Ashraf↗
DOE OSTI2026

Closed‐Loop Recycling of Poly(pentylene Adipate‐ co ‐Terephthalate) via Amine‐Catalyzed Methanolysis

Advancing circularity through effective chemical recycling strategies is essential for enabling the sustainable use of emerging biodegradable polyesters in film applications. In this context, poly(pentylene adipate-co-terephthalate) with a 40/60 adipate-to-terephthalate ratio (PPeAT60), a significantly stiffer and partially biobased copolyester recently reported by our team, offers improved mechanical performance and processability compared to commercial poly(butylene adipate-co-terephthalate), while providing a platform to evaluate advanced recycling approaches for film applications. Here, this study describes depolymerization of PPeAT60 through amine-catalyzed methanolysis, followed by the repolymerization of the recovered monomers. The resulting repolymerized material exhibited a molar mass distribution, chemical structure, and thermal stability comparable to the virgin polymer, confirming the technical feasibility of the methanolysis-based recycling route. Both polymers displayed nearly identical melting, glass transition, and decomposition temperatures, crystallinity, and modulus, demonstrating full structural and mechanical reproducibility after recycling. Variations in crystallization kinetics, elongation at break, and barrier properties likely arise from trace impurities (<1%) introduced during processing acting as nucleating and stress-inducing agents. Overall, these results demonstrate that PPeAT60 retains its key properties after chemical recycling, establishing methanolysis as a promising platform for recycling of this partially biobased polymer that may be able to replace both conventional polyolefins and PBAT in flexible packaging applications.

09 BIOMASS FUELS↗
DOE OSTI2021

Pilot scale testing of an advanced solvent in a 0.7 MWe post-combustion CO 2 capture unit

An advanced Amine Promoted Buffer Solution (APBS), APBS-CDRMax® (CDRMax), developed by Carbon Clean Solutions Limited (CCSL), was tested at the 0.7 MWe CO 2 capture facility at Kentucky Utilities E.W. Brown Generation Station using a heat-integrated two-staged stripping CO 2 capture process. The performance of the solvent was evaluated to determine operating conditions that maximized the cyclic capacity of the solvent and results in energy savings. The regeneration energy ranged from 2.9 to 3.3 GJ/ton CO 2 with 14 vol % (dry) CO 2 inlet and approximately 90 % capture. The difference in the reboiler specific heat duty at stripper pressures of 1.7 and 2.1 bar was minimal as similar amounts of water vapor were observed in the CO 2 product stream at stripper outlet. Recycling of product CO 2 increased the inlet CO 2 concentration to the absorber from 14 to 16 vol% which enhanced mass transfer from the gas to the solvent resulting in about 5 % reduction in the energy of regeneration at the lower stripper pressure. The solvent circulation rate was reduced by about 30 % relative to previous 30 wt% MEA campaign for the CO 2 target capture of 90 %. Finally, the reduced solvent make-up rate of CDRMax shows promise for capital and operating cost savings for post-combustion CO 2 capture.

42 ENGINEERING↗
DOE OSTI2020

Modernization of the Radiation Measurements Laboratory at the Advanced Test Reactor Complex

The Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) is a unique, water-cooled, high-flux test reactor capable of performing tests prototypical of PWR operating conditions. The Radiation Measurements Laboratory (RML) was founded in the 1960s to support reactor operations and to conduct independent scientific research. For nearly six decades RML has performed four primary functions: monitoring of radioactivity by gamma-ray spectroscopy of routine reactor samples, fluence rate determinations for irradiation cycles, fission-rate measurements for the ATR-Critical (ATR-C) Facility, and independent research and development of radiation detection systems and applications. Through the decades, RML has seen technological advancements that have been integrated into each of the critical functions of the laboratory. However, many of the measurement and analysis systems employed to this day can be improved by modernization. Recent progress at RML is improving reliability and accuracy of the radiation measurements performed in support of nuclear energy research for the U.S.A. Department of Energy. The control and data collection systems supporting ATR-C have been upgraded. New High-Purity Germanium (HPGe) spectrometers have been procured with liquid nitrogen recycling capabilities to improve up-time and reduce measurement uncertainties. Fluence-rate measurement techniques are also being improved to ensure accuracy, avoid systemic errors, and identify biases. In a parallel effort, new scientific research avenues are being explored which will provide an opportunity to further enhance the utilization of ATR and ensure the sustainability of the RML as nuclear research continues to evolve. The RML is improving the effectiveness of irradiation services provided by ATR while ensuring a sustainable future for nuclear energy research.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Mechanical and biochemical recovery of landfill waste in an underserved community

Historically in the United States, waste collected for recycling has been sold and shipped to processors in China. In 2013 and 2018, China introduced the Green Fence and National Sword policies which restricts the import of contaminated materials and banned the import of many recyclables. The cost of recycling in the United States has increased following these policy changes, which has led to many communities reducing their recycling programs or halting them altogether. Rural and underserved communities that don’t have resources to afford sophisticated recycling programs have been heavily impacted. Previous work at INL demonstrated that MSW is a potentially viable feedstock for both biochemical and thermochemical conversion. The goal of this project is to assess preprocessing tools that can produce consistent feedstocks that meet conversion specifications, remove problematic contaminants, and reduce the amount of waste that is landfilled. Municipal solid waste was collected from an underserved community in southeast Idaho, contaminants were characterized, and mechanically separated into two discrete fractions. The unit operations identified during mechanical separation trials will be mobilized to on-site with a goal of 50% recovery of paper and plastic waste.

09 - BIOMASS FUELS↗
DOE OSTI2026

Effects of Media Nutrient Variation on Microalgae Productivity and Economics During Semi-Continuous Cultivation

The development of large-scale microalgae growth for biofuel production is currently limited by the cost of biomass production. However, new approaches to infrastructure and cultivation practices are bringing the field closer to realization. Macronutrients in the cultivation media contribute significant costs, especially since their concentrations have not been optimized for specific strains and conditions. Environmental photobioreactors (ePBRs) were used to simulate cultivation under outdoor conditions, during which the nitrogen and phosphorus levels in the media were varied. The growth of two potential biofuel production strains, Picochlorum celeri and Tetraselmis striata, with varying nutrient inputs during summer and winter scripts, respectively, was studied. This study demonstrated that nitrogen and phosphorus in f/2 media could be reduced by more than 60% from the standard formulation, while maintaining growth rates in a semi-continuous harvesting approach. Experiments comparing the standard and reduced nutrient input concentrations were also conducted for both species in 820 L outdoor raceway ponds, in Mesa, AZ. P. celeri grown in these ponds in October had a growth rate of 10.6 ± 0.7 g/m 2 /day and 10.6 ± 0.3 g/m 2 /day for the standard and low-nutrient P. celeri ponds, respectively. T. striata grown in April–May had a growth rate of 16.6 ± 1.4 g/m 2 /day for the standard nutrient input ponds and 17.4 ± 1.1 g/m 2 /day for the low-nutrient input ponds, and in October 14.5 ± 0.6 g/m 2 /day for standard nutrient ponds and 14.4 ± 0.6 g/m 2 /day for low-nutrient ponds. These outdoor data therefore confirmed the indoor ePBR data. Techno-economic analysis shows that, if high growth rates can be attained at lower nutrient concentrations, a reduction of at least 60% in nutrient costs can be achieved. Such results highlight the importance of managing macronutrient media inputs, as these have a considerable contribution to biomass production costs in large-scale facilities. The analysis also points to the importance of maintaining high spent medium recycling rates in an industrial deployment, so as to minimize the losses of nitrogen and phosphorus compounds.

09 BIOMASS FUELS↗
DOE OSTI2022

Multiscale modeling and nonlinear model predictive control for flue gas desulfurization

The primary source of sulfur dioxide (SO 2 ) emissions is flue gas from fossil fuels-based power plants. SO 2 emissions are known to not only cause health issues, but also have an adverse effect on the environment in various ways. Several Flue Gas Desulfurization (FGD) technologies have been incorporated in power plants. The most popular technology is Wet FGD, where a limestone slurry is used to absorb SO 2 from the flue gas. A detailed droplet scale model describing the instantaneous and finite rate chemistry is developed. The ill-posed Differential-Algebraic Equation (DAE) droplet model is reformulated to a well-posed index-1 DAE through index reduction. The droplet model is integrated with the bulk phase by incorporating gas-liquid mass transfer, and an oxidation reactor model to simulate the dynamic operation of the counter-current spray scrubber. As a result, the model has a well-conditioned Jacobian and overcomes the modeling challenges of previous works and enables numerical solution without requiring carefully selected initialization or specialized solution procedures. The model is successfully validated using power plant measurements, and nonlinear model predictive control (NMPC) studies are demonstrated to optimize recycle stream flowrates to minimize pumping costs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A critical review of existing and emerging technologies and systems to optimize solid waste management for feedstocks and energy conversion

Solid waste generation and its accumulation is increasing at an alarming pace due to population growth and urbanization posing severe risks to health, safety, and natural ecosystems. Herein this review strategically addresses the challenges and solutions to increasing the sustainability footprint of solid waste management (SWM) systems by revealing multipronged approaches that reduce solid waste and handling costs while generating revenue and reducing greenhouse gas and related emissions. For example, the United States sends ~150 million tons of waste to landfills, which is composed of over 75% organic and recyclable materials having a potential to be diverted to alternative scenarios. The emergence of an automated upstream and downstream sorting process for solid waste to increase material diversion from landfills is a promising approach for creating sustainable SWM. The utilization of artificial-intelligence-enabled smart and automated systems at the home and industrial scales, comprehensive public re-education including awareness of the adverse effects of landfilled waste on the ecosystem, and more eco-friendly product development are required to significantly reduce landfills and their negative footprint.

09 BIOMASS FUELS↗
DOE OSTI2024

Genetic Basis of Non–Photochemical Quenching and Photosystem II Efficiency Responses to Chilling in the Biomass Crop Miscanthus

Miscanthus holds a promise as a biocrop due to its high yield, perenniality and ability to grow on infertile soils. However, the current commercial biomass production of Miscanthus is mostly limited to a single sterile triploid clone of M. × giganteus. Nevertheless, parental species of M. × giganteus, Miscanthus sacchariflorus and Miscanthus sinensis contain vast genetic diversity for crop improvement. With M. sacchariflorus having a natural geographic distribution in cold-temperate northeast China and eastern Russia, we hypothesised that it has substantial variation in physiological response to chilling. Using a semi-high-throughput method, we phenotyped 209 M. sacchariflorus genotypes belonging to six genetic groups for non-photochemical quenching (NPQ) and photosystem II efficiency (ΦPSII) kinetics under warm and chilling treatments in three growing seasons. In response to the chilling treatment, all genetic groups exhibited an increase in NPQ induction rate indicating faster activation of NPQ in light. Notably, under chilling, the Korea/NE China/Russia 2x and N China 2x groups stood out for the highest NPQ rate in light and the highest steady-state NPQ in light. This NPQ phenotype may contribute adaptation to chilling during bright, cold mornings of spring and early autumn in temperate climates, when faster NPQ would better protect from oxidative stress. Such enhanced adaptation could expand the growing season and thus productivity at a given location or expand the range of economically viable growing locations to higher latitudes and altitudes. A genome-wide association study identified 126 unique SNPs associated with NPQ and ΦPSII traits. Among the identified candidate genes were enzymes involved in the ascorbate recycle and shikimate pathway, gamma-aminobutyric acid and cation efflux transporters. Identifying natural variation and genes involved in NPQ and ΦPSII kinetics considerably enlarges the toolbox for breeding and/or engineering Miscanthus with optimised photosynthesis under warm and chilling conditions for sustainable feedstock production for bioenergy.

09 BIOMASS FUELS↗