Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “formate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

PAH formation from jet stirred reactor pyrolysis of gasoline surrogates

Soot particles and their precursor polycyclic aromatic hydrocarbon (PAH) species, formed during combustion, are responsible for particulate emissions in gasoline direct injection (GDI) engines. To better understand the effects of fuel composition on formation of soot in GDI engines, the pyrolysis of several gasoline surrogates was studied in a jet-stirred reactor across a broad temperature range at atmospheric pressure and 1 s residence time. Fuel and intermediate species, including aromatics up to naphthalene, were measured using gas chromatography (GC). PAH concentrations from pyrolysis of surrogate fuels were compared to gain insight into the effects of fuel composition on PAH formation. In addition, synergistic effects were observed in pyrolysis experiments of binary blends. A detailed kinetic model, recently developed at Lawrence Livermore National Laboratory (LLNL), successfully captured the effects of blending and the concentration of major PAHs. Major reaction pathways are discussed, as well as the role of important intermediate species, such as acetylene, and resonantly stabilized radicals such as allyl, propargyl, cyclopentadienyl, and benzyl in the formation of PAH.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Soot and PAH formation in high pressure spray pyrolysis of gasoline and diesel fuels

Time-resolved soot and PAH formation from gasoline and diesel spray pyrolysis are visualized and quantified using diffuse back illumination (DBI) and laser induced fluorescence (LIF) at 355 nm, respectively, in a constant-volume vessel at 60 bar from 1400 to 1700 K for up to 30 ms. The delay, maximum formation rate, and yield of soot and PAHs are compared across fuels and temperatures and correlated with the yield sooting indices on either the mass or mole basis. The delays generally decrease with increasing temperature, and the formation rates of both PAHs and soot generally increase with temperature. The apparent PAH-LIF yield may decrease with temperature due to PAH growth and conversion into larger species, signal trapping, and thermal quneching. Soot yield generally increases with temperature. The mass-based YSI correlates reasonably well with soot delay, but YSI does not correlate well with soot yield. Here, the mass-based YSI is a more appropriate predictor of sooting propensity than the mole-based YSI.

42 ENGINEERING↗
DOE OSTI2024

Phase transformation mechanism in irradiation-induced superlattice formation

Atomic kinetic Monte Carlo simulations were used to model void superlattice formation under irradiation in molybdenum, driven by anisotropic diffusion of self-interstitial atoms. A change in the phase transformation mechanism from nucleation and growth to spinodal decomposition occurred with increasing dose rate, with both mechanisms leading to superlattice formation. Analysis of a rate-theory based analytical model showed that an observed change in the kinetics of vacancy accumulation, the appearance of a region of positive second derivative in the plot of average vacancy concentration versus time, was caused by the onset of spinodal instability. Further, the analytical model showed that for molybdenum and several other metals where void superlattice formation is commonly observed, the phase transformation likely occurs by nucleation and growth. However, nickel may offer the possibility of experimental observation of the transition between phase transformation mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Slip delocalization and diffusion mediated carbide formation during fatigue of a nickel-base superalloy

Fatigue crack initiation at high temperatures occurs at microscopic fatigue shear bands that form near twin boundaries in polycrystalline nickel-base superalloys that contain minimal metallurgical defects. The associated dislocation sub-structure is complex and dependent on thermal and mechanical conditions. Here we show the formation of fine-scale carbide precipitates along these fatigue shear bands in a nickel-base superalloy during fatigue above 650 °C. The formation of carbide precipitates is studied using calculations of bulk and pipe diffusion. The contribution of pipe diffusion is observed to be critical in the formation of fine-scale carbides and occurs coincident with the delocalization of slip during fatigue.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Supercritical, liquid, and gas CO 2 reactive transport and carbonate formation in portland cement mortar

In this paper, we investigate carbonate formation and reactive transport rate in variably saturated portland cement mortars when high concentrations of gas, liquid, or supercritical CO 2 flow through their pore network. Xray computed tomography completed during CO 2 flow is used to quantify the microstructural evolution as the mortar carbonates. After in situ tests, higher resolution scans, thermogravimetric analysis, and desorption isotherm analysis are performed to further quantify microstructural changes. We found that at dry conditions supercritical CO 2 moves more rapidly through the pore space and precipitates more carbonates than liquid or gas CO 2 . However, at 50% degree of saturation (DOS) the CO 2 state did not affect the rate of transport in that each specimen exposed to a different CO 2 state carbonated within the first hour of CO 2 exposure. When the pore space is at 50 or 100% DOS, supercritical CO 2 did not react with hydration products more rapidly nor did it result in more carbonate formation during exposure compared to gas or liquid CO 2 . The amount of Ca(OH) 2 that contributes to CaCO 3 formation is correlated to the DOS. For the mortar composition analyzed, Ca(OH) 2 contributes to approximately 40% of the carbonates formed in the 50% DOS specimens and 15% in the 100% DOS specimens. In other words, as the amount of moisture in the pore space increases, phases other than Ca(OH) 2 contribute to more than 50% of the total CaCO 3 formed.

42 ENGINEERING↗
DOE OSTI2021

Superhydrophobic heat exchangers delay frost formation and enhance efficency of electric vehicle heat pumps

The number of electric vehicles has rapidly expanded as high-performance automotive lithium-ion batteries have become more affordable. However, the range of electric vehicles decreases in cold climates partly because of the additional thermal loads associated with cabin heating. One way to improve the efficiency of cabin heating is to replace resistive heating elements with an air-source heat pump system. However, to gain the full benefit of heat pumping, frost formation on the outdoor heat exchanger must be minimized. In this work, we modified the surface wettability of aluminum louvered-fin automotive heat pump evaporators and tested them under realistic operating conditions in a transcritical carbon dioxide (CO 2 ) heat pump. Each heat exchanger underwent several consecutive frosting and defrosting cycles to understand the cyclic performance of the system. The heat exchanger with a superhydrophobic outer surface was able to delay frost formation and maintain higher heat transfer rates when compared to heat exchangers with higher surface energies (hydrophilic). The delayed frost formation resulted in a system efficiency benefit in the first few frosting cycles but diminished in later cycles due to water retention and incomplete defrosting. However, for most automotive applications the superhydrophobic heat exchanger showed substantial benefits for normal driving trips. We report the scalable and optimized superhydrophobic heat exchangers developed here have the potential to increase the efficiency of automotive heat pumps and consequently increase the range and reduce energy consumption of electric vehicles.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Investigation of crossed-twin structure formation in magnesium and magnesium alloys

In this work, the effect of alloying addition on the propensity for twin-twin interactions to transform into crossed-twin structures in magnesium alloys is investigated. A full-field elasto-viscoplastic fast Fourier transform (EVP-FFT) framework combined with a discrete twin model and dislocation density-based hardening law for slip strengths is used to calculate the micromechanical fields in the crystalline matrix around the interacting twins. AZ31 and MgLi alloys are selected along with pure Mg to study the influence of plastic anisotropy in connection with alloying elements. These alloys were selected since their plastic anisotropy measure, which is defined as the ratio between the critical resolved shear stress for pyramidal $\langle$c +a$\rangle$ and basal $\langle$a$\rangle$ slip modes, spanned a wide range. To quantify the role of twin thicknesses, we probe a range of impinging twin thicknesses while fixing the recipient twin thickness. The analysis reveals that: (i) the local driving stress for crossed twin structure formation generated from the interaction of the two twins is lower in a low plastically anisotropic material, like a MgLi alloy, than a high plastically anisotropic material like pure Mg and (ii) the critical impinging twin thickness needed to form the crossed twin structure in pure Mg, AZ31 and MgLi alloys is ~0.5, ~0.75 and ~1.5 times the recipient twin thickness. We propose a relationship between the tendency for crossed twin structure formation and the experimentally observed higher ductility in MgLi alloys compared to pure Mg. Finally, one key implication of the findings is that crossed- twin structure formation can be hindered and the ductility of magnesium alloy thereby improved by properly choosing alloying elements that lower the slip strength for pyramidal $\langle$c + a$\rangle$ slip.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Intermetallic phase formation in Al-Si-Zr alloys during hot isostatic pressing revealed by experiments and molecular dynamics

Understanding phase transformations at alloy interfaces is critical for the design of advanced structural materials. Here, in this study, we investigate the formation mechanisms of the Al 2 SiZr intermetallic phase in the Al-Si-Zr system under hot isostatic pressing (HIP) using molecular dynamics (MD) simulations and thermodynamic analysis. A unique aspect of our approach in MD involves the replacement of a disordered Al 2 SiZr stoichiometry with an ordered phase at the Al-Zr interface once HIP results in the desired Al 2 SiZr stoichiometry, allowing us to compute the total energetic cost of transformation by accounting for both formation energies and diffusion barriers. Diffusion coefficients and activation energies, extracted across a range of temperatures, reveal that HIP substantially enhances atomic mobility, creating favorable stoichiometry for phase evolution. Our results show that Al 2 SiZr phase formation is kinetically unfavorable at lower temperatures but becomes feasible when the thermodynamic driving energy surpass a critical energy threshold.

Roy, Ankit [Pacific Northwest National Laboratory ↗
DOE OSTI2022

Crystallization pathways and interfacial drivers for the formation of hierarchical architectures

The development of structural hierarchy on various length scales during crystallization process is ubiquitous in biological systems and is also observed in synthetic nanomaterials. The driving forces for the formations of complex architectures range from local interfacial interactions, that modify interfacial speciation, local supersaturation, and nucleation barriers, to macroscopic interparticle forces. Although it is enticing to interpret the formation of hierarchical architectures as the assembly of independently nucleated building blocks, often crystallization pathways follow monomer-by-monomer addition with structural complexity arising from interfacial chemical coupling and strongly correlated fluctuation dynamics in the electric double layers. Here, the mechanism of the development of structural hierarchy through heterogeneous nucleation, coupled interfacial nucleation and assembly, and oriented attachment of independently nucleated particles is discussed. In this article, the emphasis is made on the discussion of the underlying interfacial forces and chemical coupling that drives crystallization pathways towards the formation of structural hierarchy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pectin methyltransferase QUASIMODO2 functions in the formation of seed coat mucilage in Arabidopsis

Pectin, cellulose, and hemicelluloses are major components of primary cell walls in plants. In addition to cell adhesion and expansion, pectin plays a central role in seed mucilage. Seed mucilage contains abundant pectic rhamnogalacturonan-I (RG-I) and lower amounts of homogalacturonan (HG), cellulose, and hemicelluloses. Previously, accumulated evidence has addressed the role of pectin RG-I in mucilage production and adherence. However, less is known about the function of pectin HG in seed coat mucilage formation. In this study, we analyzed a novel mutant, designated things fall apart2 (tfa2), which contains a mutation in HG methyltransferase QUASIMODO2 (QUA2). Etiolated tfa2 seedlings display short hypocotyls and adhesion defects similar to qua2 and tumorous shoot development2 (tsd2) alleles, and show seed mucilage defects. Here, the diminished uronic acid content and methylesterification degree of HG in mutant seed mucilage indicate the role of HG in the formation of seed mucilage. Cellulosic rays in mutant mucilage are collapsed. The epidermal cells of seed coat in tfa2 and tsd2 display deformed columellae and reduced radial wall thickness. Under polyethylene glycol treatment, seeds from these three mutant alleles exhibit reduced germination rates. Together, these data emphasize the requirement of pectic HG biosynthesis for the synthesis of seed mucilage, and the functions of different pectin domains together with cellulose in regulating its formation, expansion, and release.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Polysulfide reduction and Li 2 S phase formation in the presence of lithium metal and solid electrolyte interphase layer

Lithium sulfur battery is an attractive next generation technology that can meet many demands of modern society. Unfortunately, the lithium sulfur battery faces unique issues related to the polysulfide shuttle effect, that is due to reduction products dissolving in the electrolyte and their subsequent reduction on the lithium metal electrode. This adds further problems to the already challenging needs of understanding and engineering a solid electrolyte interphase (SEI) layer with desired properties. One of the most important SEI properties is its passivation of lithium metal which is critically important to the overall battery performance. Passivation is difficult to measure experimentally without the influence of many factors. This study reports an investigation of the reduction of the intermediate Li 2 S 8 over lithium already passivated with Li 2 O, Li 2 CO 3 , LiOH, LiF and Li 2 S along with exploration of Li 2 S 8 reduction over pristine lithium nanoclusters using first principles computational models. Significant formation of Li 2 S phase nucleation is found to stabilize the reduction products of the Li 2 S 8 . Here, the formation of Li 2 S is explored in-depth with lithium nanocluster-based models determining a 2 V potential increase for the reduction of polysulfides due to the formation of Li 2 S. This investigation demonstrates passivation effects of important SEI components including Li 2 S.

25 ENERGY STORAGE↗
DOE OSTI2024

Chemical composition based machine learning model to predict defect formation in additive manufacturing

With a goal of exploiting additive manufacturing to improve the manufacturing of existing reactor materials, we developed a chemical composition-based machine learning model to predict the printability of any given alloy in laser powder bed fusion (L-PBF) using experimental data from peer-reviewed literature. We defined printability as the ability to avoid defects like cracking, balling, porosity, and lack of fusion, that are caused by thermal stresses (during solidification or liquation), molten pool disintegration into disconnected small beads or lack of heat input respectively. Our models predict the tendency of balling defect formation and porosity percentage for a given composition, under a given set of processing conditions. To predict the likelihood of balling defect, three models: a random forest classifier, a gradient boost regressor and a neural network were trained on a dataset containing both traditional alloys and high entropy alloys. The neural network model showed the highest accuracy of 92.3 % in predicting the balling defect formation. A random forest regressor, gradient boost regressor and neural network were trained and tested on a dataset of various alloys to predict porosity. The random forest regressor showed the best predictions with an R 2 score of 0.97. The models also revealed the relative importance of the input descriptors on defect-formation tendency. Of particular significance was the identification of carbon as an important element in determining the occurrence of balling and percent porosity in alloys like steel, as well as being moderately important to the percentage porosity in other alloys as well as steel. Manganese was also identified as a key descriptor for the percentage of porosity in steel and other alloys. Manganese’s low thermal conductivity and consistent presence in the dataset is the likely cause for its contribution. Carbon’s role is attributable to its relatively high specific heat and high melting temperature. In conclusion, our model serves as a swift, chemistry-based tool to design experiments and find modified compositions better suited for additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Irradiation-induced formation of G-phase precipitates and M 2 X carbides in self-ion irradiated HT-9

Ferritic-martensitic steels with high chromium content are a promising material group for advanced nuclear systems due to their high temperature strength and good irradiation tolerance. HT-9 is an optimized and often-studied alloy in this group, but additional studies are required on its radiation response under extreme conditions to be experienced in various types of nuclear reactors, especially with respect to phase stability under irradiation. Self-ion irradiation of HT-9 by 5 MeV Fe ions was used to simulate neutron-induced behavior reaching peak doses of 100 and 300 dpa at temperatures ranging from 450 to 550 °C. M 23 C 6 carbides that existed prior to irradiation were found to remain stable under all examined irradiation conditions. As irradiation progressed at 450 and 500 °C, however, formation of spherical-like G-phase precipitates and needle-like M 2 X carbides was observed. G-phase precipitates were found to be enriched in Ni, Si, and Mn, and show no interface segregation, whereas needle-like M 2 X carbides were rich in Cr and Mo and clearly displayed interface segregation of Ni and Si. M 2 X carbide formation is believed to be assisted by vacancies, while G-phase precipitation is thought to be assisted by interstitials. Finally, this difference in defect-mediated formation leads to a difference in distribution with depth. M 2 X carbides are distributed over shallower depths than that of G-phase precipitates, consistent with defect imbalance predictions that consider the influence of the injected interstitial effect.

atom probe tomography↗
DOE OSTI2024

Enhanced early galaxy formation in JWST from axion dark matter?

We demonstrate that enhanced early galaxy formation can generically arise in axion-like particle (ALP) dark matter (DM) models with a delayed onset of axion field oscillation. In these models, the formation of localized massive objects enhances structure formation, potentially addressing the excess recently observed by the James Webb Space Telescope (JWST), while remaining consistent with existing constraints. We identify viable parameter space with the ALP mass in the range of 10 −22 eV m a < 10 –19 eV. In addition, we show that the ALP parameter regions of interest can lead to intriguing complementary signatures in the small scale structure of DM halos and existing experimental searches for ALPs.

Bird, Simeon↗
DOE OSTI2020

Effect of ammonia addition on suppressing soot formation in methane co-flow diffusion flames

Due to issues surrounding carbon dioxide emissions from carbon-containing fuels, there is growing interest in ammonia (NH 3 ) as an alternative combustion fuel. One attractive method of burning NH 3 is to co-fire it with hydrocarbons, such as natural gas, and in this case soot formation is possible. To begin understanding the influence of NH 3 on soot formation when co-fired with hydrocarbons, soot volume fractions and mole fractions of gas-phase species were computationally and experimentally interrogated for CH 4 flames with up to 40% NH 3 by volumetric fuel fraction. Mole fractions of gas-phase species, including C 2 H 2 and C 6 H 6 , were measured with on-line electron impact mass spectrometry, and soot volume fractions were obtained via color-ratio pyrometry. The simulations employed a detailed chemical mechanism developed for capturing nitrogen interactions with hydrocarbons during combustion. The results are compared to findings in N 2 -CH 4 flames, in order to separate thermal and dilution effects from the chemical influence of NH 3 on soot formation. Experimentally, C 2 H 2 concentrations were found to decrease slightly for the NH 3 -CH 4 flames relative to N 2 -CH 4 flames, and a stronger suppression of C 6 H 6 was found for NH 3 relative to N 2 additions. The measured results show a strong suppression of soot with the addition of NH 3 , with soot concentrations reduced by over a factor of 10 with addition of up to 20% or more NH 3 by mole fraction. The model satisfactorily captured relative differences in maximum centerline C 2 H 2 , C 6 H 6 , and soot concentrations with addition of N 2 , but was unable to match measured differences in NH 3 -CH 4 flames. Furthermore, these results highlight the need for an improved understanding of fuel-nitrogen interactions with higher hydrocarbons to enable accurate models for predicting particulate emissions from NH 3 /hydrocarbon combustion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Formation of phenanthrenyl radicals via the reaction of acenaphthyl with acetylene

Ab initio G3(MP2,CC)/B3LYP/6–31G** calculations of the potential energy surface for the reaction of 3-acenaphthyl radical with acetylene were combined with Rice-Ramsperger-Kassel-Marcus Master Equation calculations of the temperature- and pressure-dependent reaction rate constants and product branching ratios with the goal to examine the transformation of an edge five-membered ring into a six-membered one. The reaction mechanism has been shown to contain two stages: (1) the formation of 3-ethynylacenaphthylene + H in the 3-acenaphthyl + C 2 H 2 reaction via acetylene addition to the radical site and an H loss, (2) the formation of the 1-phenanthrenyl radical in the 3-ethynylacenaphthylene + H reaction via H addition to the five-membered ring followed by the ring flip. The results of kinetic modeling show this pathway being faster than the pathway proposed earlier featuring the CCH chemisorption on the six-membered ring without involvement of the five-membered ring. A kinetic test demonstrated the dominance of the former pathway for the formation of pyrene from naphthalene. Here, it is expected that the new mechanism plays a major role in the transformation of five-membered rings on edges of PAH structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Analysis of soot formation from aviation fuels in laminar counterflow flames

Combustion emissions from aviation contribute to the formation of condensation trail (contrail) that can lead to the formation of anthropogenic cirrus clouds. Ice particles that form contrails are observed to have a linear correlation with soot particle number density. Synthetic aviation fuels (SAFs) offer a promising route to mitigate the production of soot particles while also increasing energy security. Although studies have focused on combustion and spray behavior, the detailed investigation of soot formation processes for different jet fuels and their impact on models for computational fluid dynamics (CFD) applications is not well understood. Moreover, experimental measurements of soot for canonical flames using Synthetic aviation fuels (SAF) for model validation remain scarce. To address this, we use employed the Lawrence Livermore National Laboratory (LLNL) detailed soot model based on the discrete sectional method. Additionally, we develop two reduced chemical mechanisms for Jet-A and Alcohol-to-Jet (C1) that are suitable for turbulent flame simulations and couple them with the Hybrid Method of Moments (HMOM). The detailed and reduced model frameworks are validated against experimental measurements of soot volume fraction (ƒ ν ) from a counterflow burner experiment previously reported in the literature. Given the good agreement between modeling results and experimental measurements for the (1) spatial distribution of ƒ ν and (2) the non-linear variation of peak ƒ ν with strain rate, we further investigate the modeled sub-processes (nucleation, condensation, surface growth, and oxidation) using the LLNL model to analyze the assumptions in the reduced model framework. Furthermore, the results indicate a significant contribution from resonant radicals to the surface growth of soot particles, which are not accounted for in the current implementation of HMOM and could help reconcile soot predictions by the reduced model with observations.

Counterflow↗
DOE OSTI2020

Nanotwin formation in Ni-Mo-W alloys deposited by dc magnetron sputtering

Nanotwinned metals and alloys have an attractive suite of properties, but the formation of the underlying nanostructure is generally dependent on the alloy chemistry and processing conditions. This study was undertaken to investigate the effect of deposition rate on nanotwin formation in sputter deposited Ni 84 Mo 11 W 5 that possess ultrahigh strength and stability. Specifically, deposition rates of 0.5-2.3 nm/s were examined and the grain size, texture, twin spacing and hardness were characterized. Minimal variations in the underlying nanostructure and attendant hardness were observed, elucidating a wide processing window and the importance of chemistry on the formation of nanotwins in this alloy.

36 MATERIALS SCIENCE↗