SEARCH · Engineering Papers

Results for “extended structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Capillary heat transport and fluid management device

A passive heat transporting and fluid management apparatus including a housing in the form of an extruded body member having flat upper and lower surfaces is disclosed. A main liquid channel and at least two vapor channels extend longitudinally through the housing from a heat input end to a heat output end. The vapor channels have sintered powdered metal fused about the peripheries to form a porous capillary wick structure. A substantial number of liquid arteries extend transversely through the wicks adjacent the respective upper and lower surfaces of the housing, the arteries extending through the wall of the housing between the vapor channels and the main liquid channel and open into the main liquid channel. Liquid from the main channel enters the artery at the heat input end, wets the wick and is vaporized. When the vapor is cooled at the heat output end, the condensed vapor refills the wick and the liquid reenters the main liquid channel.

James W Owen↗

NASA NTRS1980

Technologies involved in configuring an advanced earth-to-orbit transport for low structural mass

A tradeoff study for a single-stage, earth-to-orbit transport spacecraft configured with low structural mass as the prime objective is presented. Among the major design elements affecting vehicle mass are: maneuverability and re-entry heating, the compatibility of an irregular cargo bay geometry to future mission requirements, the fabrication and assembly of large honeycomb structure fuselage sections, and the development of LOX/LH2 engine extendable nozzles and dual-propulsion schemes. It is shown that vehicle geometry and materials and structural technologies will be the critical areas in the development of such a system.

Macconochie, I. O.↗

NASA NTRS2001

Ranges of applicability for the continuum beam model in the mechanics of carbon nanotubes and nanorods

Limitations in the validity of the continuum beam model for carbon nanotubes (NTs) and nanorods are examined. Applicability of all assumptions used in the model is restricted by the two criteria for geometric parameters that characterize the structure of NTs. The key non-dimensional parameters that control the NT buckling behavior are derived via dimensional analysis of the nanomechanical problem. A mechanical law of geometric similitude for NT buckling is extended from continuum mechanics for different molecular structures. A model applicability map, where two classes of beam-like NTs are identified, is constructed for distinct ranges of non-dimensional parameters. Expressions for the critical buckling loads and strains are tailored for two classes of NTs and compared with the data provided by the molecular dynamics simulations. copyright 2001 Elsevier Science Ltd. All rights reserved.

Continuum beam model↗

NASA NTRS1997

COMET-AR User's Manual: COmputational MEchanics Testbed with Adaptive Refinement

The COMET-AR User's Manual provides a reference manual for the Computational Structural Mechanics Testbed with Adaptive Refinement (COMET-AR), a software system developed jointly by Lockheed Palo Alto Research Laboratory and NASA Langley Research Center under contract NAS1-18444. The COMET-AR system is an extended version of an earlier finite element based structural analysis system called COMET, also developed by Lockheed and NASA. The primary extensions are the adaptive mesh refinement capabilities and a new "object-like" database interface that makes COMET-AR easier to extend further. This User's Manual provides a detailed description of the user interface to COMET-AR from the viewpoint of a structural analyst.

Moas, E.↗

NASA NTRS1986

Space ultra-vacuum facility and method of operation

A wake shield facility providing an ultrahigh vacuum level for space processing is described. The facility is in the shape of a truncated, hollow hemispherical section, one side of the shield convex and the other concave. The shield surface is preferably made of material that has low out-gassing characteristics such as stainless steel. A material sample supporting fixture in the form of a carousel is disposed on the convex side of the shield at its apex. Movable arms, also on the convex side, are connected by the shield in proximity to the carousel, the arms supporting processing fixtures, and providing for movement of the fixtures to predetermined locations required for producing interations with material samples. For MBE processes a vapor jet projects a stream of vaporized material onto a sample surface. The fixtures are oriented to face the surface of the sample being processed when in their extended position, and when not in use they are retractable to a storage position. The concave side of the shield has a support structure including metal struts connected to the shield, extending radially inward. The struts are joined to an end plate disposed parallel to the outer edge of the shield. This system eliminates outgassing contamination.

Naumann, Robert J.↗

NASA NTRS2017

Energy-Absorbing Beam Member

An energy-absorbing (EA) beam member and having a cell core structure is positioned in an aircraft fuselage proximate to the floor of the aircraft. The cell core structure has a length oriented along a width of the fuselage, a width oriented along a length of the fuselage, and a depth extending away from the floor. The cell core structure also includes cell walls that collectively define a repeating conusoidal pattern of alternating respective larger and smaller first and second radii along the length of the cell core structure. The cell walls slope away from a direction of flight of the aircraft at a calibrated lean angle. An EA beam member may include the cell core structure and first and second plates along the length of the cell core structure on opposite edges of the cell material.

Littell, Justin D.↗

NASA NTRS1990

A subgrid-scale model based on the second-order velocity structure function

A series of tests were performed to help extend the use of a subgrid-scale model to compressible and wall-bounded flows. A priori tests were done in the case of the incompressible turbulent channel flow. They showed that a 1-D formulation of the structure-function model is more appropriate, leading to a satisfactory behavior of the model at the walls without requiring any damping function. This model is consistent with the original formulation of Metais & Lesieur (1990). In large-eddy simulations of compressible isotropic turbulence, both models performed well up to an initial rms Mach number of 0.6.

Comte, P.↗

NASA NTRS1978

A purely coronal hard X-ray event

OSO 7 observations of a hard X-ray event of coronal origin are described. This event had a duration of more than 42 min as well as an abnormally large hard/soft ratio and apparently occurred after the disappearance of a bright coronal streamer. This gradual hard X-ray event is tentatively associated with open field lines extending well above the closed loop structures that participated in the originating flare. It is noted that a gradual hardening of the hard X-ray spectral distribution occurred during the event. Physical conditions in the source are considered, and the results are compared with observations of other hard X-ray events associated with flares.

Hudson, H. S.↗

NASA NTRS1981

Prospects for measuring phytoplankton bloom extent and patchiness using remotely sensed color images: An example

A 10 channel scanning radiometer, built as a prototype for the coastal zone color scanner on the Nimbus 7 satellite, was flown on a high altitude aircraft during a Gymnodium breve bloom along the west coast of Florida. The remotely measured ocean color imagery shows what is probably the patchy structure of a G. breve bloom extending over a 60 km by 100 km area. This conclusion is based on visual inspection of bathymetry to infer bottom reflection trends and on a single growth truth measurement of B G. breve obtained the previous day. The image shows coherent blooms which extend scales up to 60 km in length.

Mueller, J. L.↗

NASA NTRS1982

Ion distribution effects of turbulence on a kinetic auroral arc model

An inverted-V auroral arc structure plasma-kinetic model is extended to phenomenologically include the effects of electrostatic turbulence, with k-parallel/k-perpendicular being much less than unity. It is shown that, unless plasma sheet ions are very much more energetic than the electrons, anomalous resistivity is not a large contributor to parallel electrostatic potential drops, since the support of the observed potential drop requires a greater dissipation of energy than can be provided by the plasma sheet. Wave turbulence can, however, be present, with the ion cyclotron turbulence levels suggested by the ion resonance broadening saturation mechanism of Dum and Dupree (1970) being comparable to those observed on auroral field lines. The diffusion coefficient and net growth rate are much smaller than estimates based solely on local plasma properties.

Cornwall, J. M.↗

NASA NTRS1985

Iron impurities in Si3N4 processing

The atomic environment of iron impurities is investigated during the processing cycle of reaction-bonding silicon nitride (RBSN). Several analysis techniques are utilized, including X-ray photoelectron spectroscopy (XPS), extended X-ray absorption fine structure (EXAFS), and electron spin resonance (ESR), to examine iron impurities in the starting silicon powder, in sintered silicon compacts, and in RBSN materials. Results indicate that iron impurities in as-received metallurgical grade silicon powder are incorporated in the silicon bulk as a highly distorted FeSi2 compound. No surface iron or iron-based particulate is observed in the starting material. Upon sintering, the iron environment becomes an ordered FeSi2 structure. In the RBNS material, the FeSi2 structure is again distorted, as observed by both EXAFS and ESR.

Bouldin, C. E.↗

NASA NTRS1984

The nature of chemisorbed oxygen on Ni(100) and Cu(100)

Model calculations indicate two low-lying states for the interaction of O with Ni and Cu(100). The oxide state is approximately 1 eV more stable and its R(perpendicular) for Ni(100) is consistent with the experimental value for Ni(100), indicating only one type of stable chemisorption bond. This agrees with XPS (X-ray photoemission spectroscopy) and EXAFS (extended X-ray absorption fine structure) data for the observed LEED (low energy electron diffraction) structures. Interpretations of EELS (electron energy loss spectroscopy) data in terms of a radical state forthe p(2x2) and the oxide state for the c(2x2) structure must be seriously questioned.

Bauschlicher, C. W., Jr.↗

NASA NTRS1985

Studies of the Si/SiO2 interface using synchrotron radiation

Synchrotron radiation photoemission spectroscopy (SRPS) in the 1-4 KeV photon energy range is a useful tool for interface characterization. Results are presented of a series of studies of the near-interface region of Si/SiO2 which confirm that a bond strain gradient exists in the oxide as a result of lattice mismatch. These experiments include measurement of photoemission lineshape changes as a function of photon energy, corresponding changes in the electron escape depth near the interface, and surface extended X-ray absorption fine structure (SEXAFS) measurements directly indicating the shortening of the Si-Si second nearest neighbor distance in the near-interface region of the oxide.

Hecht, M. H.↗

NASA NTRS1986

Shock acceleration of nucleons at 16 deg and above solar latitude associated with interplanetary corotating interaction regions

The analysis of magnetic field and nuclei measurements in the 1 to 10 MeV/nucleon range for protons and helium at about 16 deg N solar latitude near solar cycle minimum (1975-76) shows both: (1) that nucleons are accelerated locally in corotating shocks, and (2) that the associated recurring corotating interaction regions (CIRs) at about 16 deg latitude have approximately the same temporal and spatial parameters found for CIRs in the equatorial plane at radial distances less than 5 AU. The evidence indicates that both the CIR structures and nucleon acceleration by shocks extend to intermediate solar latitudes and are likely to be observed during the Ulysses Mission out of the ecliptic plane.

Simpson, J. A.↗

NASA NTRS1988

Antenna pointing compensation based on precision optical measurement techniques

The pointing control loops of the Deep Space Network 70 meter antennas extend only to the Intermediate Reference Structure (IRS). Thus, distortion of the structure forward of the IRS due to unpredictable environmental loads can result in uncompensated boresight shifts which degrade blind pointing accuracy. A system is described which can provide real time bias commands to the pointing control system to compensate for environmental effects on blind pointing performance. The bias commands are computed in real time based on optical ranging measurements of the structure from the IRS to a number of selected points on the primary and secondary reflectors.

Schumacher, L. L.↗

NASA NTRS1989

Algorithms and software for solving finite element equations on serial and parallel architectures

Over the past 15 years numerous new techniques have been developed for solving systems of equations and eigenvalue problems arising in finite element computations. A package called SPARSPAK has been developed by the author and his co-workers which exploits these new methods. The broad objective of this research project is to incorporate some of this software in the Computational Structural Mechanics (CSM) testbed, and to extend the techniques for use on multiprocessor architectures.

George, Alan↗

NASA NTRS1988

Electrodynamic patterns in the polar region during periods of extreme magnetic quiescence

Using data from the DE 2 satellite, the electrodynamic patterns in the polar region during periods of extreme magnetic and auroral quiescence are analyzed for the existence of region-1 and region-2 field-aligned current systems, convection patterns, and electron-precipitation boundaries. The large-scale region-1 and region-2 currents were found to be usually absent during quiet periods, except in the cusp region. Field-aligned currents continue to be present, but as small-scale structures distributed through the auroral oval and over the entire polar cap. Convection patterns were always found in the summer hemisphere, but not always in the winter hemisphere, while structured electron precipitation was found to extend over the entire polar region independent of season.

Hoffman, R. A.↗

NASA NTRS1990

PCI: A PATRAN-NASTRAN model translator

The amount of programming required to develop a PATRAN-NASTRAN translator was surprisingly small. The approach taken produced a highly flexible translator comparable with the PATNAS translator and superior to the PATCOS translator. The coding required varied from around ten lines for a shell element to around thirty for a bar element, and the time required to add a feature to the program is typically less than an hour. The use of a lookup table for element names makes the translator also applicable to other versions of NASTRAN. The saving in time as a result of using PDA's Gateway utilities was considerable. During the writing of the program it became apparent that, with a somewhat more complex structure, it would be possible to extend the element data file to contain all data required to define the translation from PATRAN to NASTRAN by mapping of data between formats. Similar data files on property, material and grid formats would produce a completely universal translator from PATRAN to any FEA program, or indeed any CAE system.

Sheerer, T. J.↗