Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “equation of fluid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Theoretical approach to obtaining dynamic characteristics of noncontacting spiral-grooved seals

The dynamic characteristics of spiral-grooved seals are theoretically obtained by using the Navier-Stokes equation. First, with the inertia term of the fluid considered, the flow and pressure in the steady state are obtained for the directions parallel to and perpendicular to the groove. Next, the dynamic character is obtained by analyzing the steady state and by analyzing the labyrinth seal. As a result, the following conclusions were drawn: (1) As the land width becomes shorter or the helix angle decreases, the cross-coupling stiffness, direct and cross-coupling damping, and add mass coefficients decrease; (2) As the axial Reynolds number increases, the stiffness and damping coefficients increase. But the add mass coefficient is not influenced by the axial Reynolds number; (3) The rotational Reynolds number influences greatly the direct and cross-coupling stiffness and direct damping coefficients; and (4) As the journal rotating frequency increases, the leakage flow decreases. Therefore zero net leakage flow is possible at a particular rotating frequency.

Iwatsubo, Takuzo↗
NASA NTRS1996

A Computational Fluid Dynamic and Heat Transfer Model for Gaseous Core and Gas Cooled Space Power and Propulsion Reactors

A computational model based on the axisymmetric, thin-layer Navier-Stokes equations is developed to predict the convective, radiation and conductive heat transfer in high temperature space nuclear reactors. An implicit-explicit, finite volume, MacCormack method in conjunction with the Gauss-Seidel line iteration procedure is utilized to solve the thermal and fluid governing equations. Simulation of coolant and propellant flows in these reactors involves the subsonic and supersonic flows of hydrogen, helium and uranium tetrafluoride under variable boundary conditions. An enthalpy-rebalancing scheme is developed and implemented to enhance and accelerate the rate of convergence when a wall heat flux boundary condition is used. The model also incorporated the Baldwin and Lomax two-layer algebraic turbulence scheme for the calculation of the turbulent kinetic energy and eddy diffusivity of energy. The Rosseland diffusion approximation is used to simulate the radiative energy transfer in the optically thick environment of gas core reactors. The computational model is benchmarked with experimental data on flow separation angle and drag force acting on a suspended sphere in a cylindrical tube. The heat transfer is validated by comparing the computed results with the standard heat transfer correlations predictions. The model is used to simulate flow and heat transfer under a variety of design conditions. The effect of internal heat generation on the heat transfer in the gas core reactors is examined for a variety of power densities, 100 W/cc, 500 W/cc and 1000 W/cc. The maximum temperature, corresponding with the heat generation rates, are 2150 K, 2750 K and 3550 K, respectively. This analysis shows that the maximum temperature is strongly dependent on the value of heat generation rate. It also indicates that a heat generation rate higher than 1000 W/cc is necessary to maintain the gas temperature at about 3500 K, which is typical design temperature required to achieve high efficiency in the gas core reactors. The model is also used to predict the convective and radiation heat fluxes for the gas core reactors. The maximum value of heat flux occurs at the exit of the reactor core. Radiation heat flux increases with higher wall temperature. This behavior is due to the fact that the radiative heat flux is strongly dependent on wall temperature. This study also found that at temperature close to 3500 K the radiative heat flux is comparable with the convective heat flux in a uranium fluoride failed gas core reactor.

Anghaie, S.↗
NASA NTRS2015

Results of Microgravity Fluid Dynamics Captured With the Spheres-Slosh Experiment

This paper provides an overview of the SPHERES-Slosh Experiment (SSE) aboard the International Space Station (ISS) and presents on-orbit results with data analysis. In order to predict the location of the liquid propellant during all times of a spacecraft mission, engineers and mission analysts utilize Computational Fluid Dynamics (CFD). These state-of-the-art computer programs numerically solve the fluid flow equations to predict the location of the fluid at any point in time during different spacecraft maneuvers. The models and equations used by these programs have been extensively validated on the ground, but long duration data has never been acquired in a microgravity environment. The SSE aboard the ISS is designed to acquire this type of data, used by engineers on earth to validate and improve the CFD prediction models, improving the design of the next generation of space vehicles as well as the safety of current missions. The experiment makes use of two Synchronized Position Hold, Engage, Reorient Experimental Satellites (SPHERES) connected by a frame. In the center of the frame there is a plastic, pill shaped tank that is partially filled with green-colored water. A pair of high resolution cameras records the movement of the liquid inside the tank as the experiment maneuvers within the Japanese Experimental Module test volume. Inertial measurement units record the accelerations and rotations of the tank, making the combination of stereo imaging and inertial data the inputs for CFD model validation.

slosh↗
NASA NTRS2015

Results of Microgravity Fluid Dynamics Captured with the Spheres-Slosh Experiment

This paper provides an overview of the SPHERES-Slosh Experiment (SSE) aboard the International Space Station (ISS) and presents on-orbit results with data analysis. In order to predict the location of the liquid propellant during all times of a spacecraft mission, engineers and mission analysts utilize Computational Fluid Dynamics (CFD). These state-of-the-art computer programs numerically solve the fluid flow equations to predict the location of the fluid at any point in time during different spacecraft maneuvers. The models and equations used by these programs have been extensively validated on the ground, but long duration data has never been acquired in a microgravity environment. The SSE aboard the ISS is designed to acquire this type of data, used by engineers on earth to validate and improve the CFD prediction models, improving the design of the next generation of space vehicles as well as the safety of current missions. The experiment makes use of two Synchronized Position Hold, Engage, Reorient Experimental Satellites (SPHERES) connected by a frame. In the center of the frame there is a plastic, pill shaped tank that is partially filled with green-colored water. A pair of high resolution cameras records the movement of the liquid inside the tank as the experiment maneuvers within the Japanese Experimental Module test volume. Inertial measurement units record the accelerations and rotations of the tank, making the combination of stereo imaging and inertial data the inputs for CFD model validation.

slosh↗
NASA NTRS2015

Result of Microgravity Fluid Dynamics Captured with the SPHERES-Slosh Experiment

This paper provides an overview of the SPHERES-Slosh Experiment (SSE) aboard the International Space Station (ISS) and presents on-orbit results with data analysis. In order to predict the location of the liquid propellant during all times of a spacecraft mission, engineers and mission analysts utilize Computational Fluid Dynamics (CFD). These state-of-the-art computer programs numerically solve the fluid flow equations to predict the location of the fluid at any point in time during different spacecraft maneuvers. The models and equations used by these programs have been extensively validated on the ground, but long duration data has never been acquired in a microgravity environment. The SSE aboard the ISS is designed to acquire this type of data, used by engineers on earth to validate and improve the CFD prediction models, improving the design of the next generation of space vehicles as well as the safety of current missions. The experiment makes use of two Synchronized Position Hold, Engage, Reorient Experimental Satellites (SPHERES) connected by a frame. In the center of the frame there is a plastic, pill shaped tank that is partially filled with green-colored water. A pair of high resolution cameras records the movement of the liquid inside the tank as the experiment maneuvers within the Japanese Experimental Module test volume. Inertial measurement units record the accelerations and rotations of the tank, making the combination of stereo imaging and inertial data the inputs for CFD model validation.

slosh↗
NASA NTRSDate not supplied

Sparse Linear Algebra Toolkit for Computational Aerodynamics

Finding solutions to sparse linear systems of equations is an essential step in Computational Engineering applications of interest to NASA. Linear systems of equations are composed and solved in almost every computational engineering application. The characteristics of linear systems vary greatly from one application to another. Accordingly, there are a wide variety of methods for the solution of linear systems of equations. The operations and methods prepared by the authors are focused on linear systems of interest to NASA, primarily those associated with Computational Fluid Dynamics (CFD), Aeroelasticity, and Aeroacoustics. The Sparse Linear Algebra Toolkit (SLAT) is a coordinated collection of software featuring operations, methods, and data structures that are useful when solving sparse linear systems of equations on modern computer architectures. The implemented operations and methods are designed and tuned for parallelism in shared memory, in distributed memory, and across the hybrid combination of distributed-shared memory. The toolkit includes novel methods and implementations for modern architectures and facilitates development of new approaches for meeting NASA’s evolving computational engineering challenges using evolving computer architectures that are not available in vendor libraries. In this paper, significant features and interfaces within SLAT are presented and verified for simulations performed with NASA’s CFD solver, FUN3D. The runtime and scaling performance of the Generalized Minimum Residual (GMRES) method implemented in SLAT is analyzed for the linear subproblems within the solution of turbulent Navier-Stokes equations employed in the simulation of high-lift configurations. Prior to this work, the SPARSKIT GMRES implementation was the only Krylov subspace method available within FUN3D. A strong scaling study shows the SLAT GMRES implementation facilitates accurate Reynolds-averaged Navier-Stokes CFD solutions between 15% and 56% faster than the SPARSKIT GMRES implementation.

Stephen L Wood↗
NASA NTRS1993

Computational aeroelasticity

Recent large-scale studies of computational unsteady aerodynamics for aeroelastic applications are reviewed. The variety of fluid dynamic flow models available to address such computations are illustrated in two cases: (1) 2D Navier-Stokes (NS) equations illustrating the highest level of modeling usually employed and (2) the transonic small-disturbance potential equation representing the entry level for nonlinear flow modeling. Estimates of computer resources necessary to produce accurate converged results are given. Application of potential and NS equation codes for flows which are generally at lower angles and high speeds are addressed, including (1) the treatment of wings and configuration details using potential equation codes and (2) recent NS code calculations of complete vehicle configurations. Attention is given to high-angle conditions involving separated vortex-dominated flows. Accuracy requirements for vortex shedding over airfoils is discussed and the calculation of vorticity convected over significant distances is addressed. Steady CFD computations about delta wings at high angles are given, including a discussion of the required level of fluid dynamic flow modeling. Recent results on unsteady 'buffetlike flow' about complete vehicle models are reviewed.

Edwards, John W.↗
NASA NTRS1984

Investigation of the equatorial orographic-dynamic mechanism applying the bounded derivative method

A system of equations which describe the motion of a barotropic fluid in the presence of bottom topography are presented. The mathematical expression for orography is developed and the bounded derivative initialization method is applied to suppress gravitational oscillations. A stationary orographic trough is simulated. The geopotential and zonal motion have maximum deviation from the mean state at the top of the mountain. Regarding meridional speed, outflow occurs on the windward slope and inflow on the leeward slope. Divergence of order (10(-6)s(-1) is found on the windward slope while convergence of the same order of magnitude resides on the leeward slope. This outcome may have interesting implications regarding real climatology occurring over the equatorial regions of continental land masses.

Semazzi, F. H. M.↗
NASA NTRS1993

Sloshing dynamics on rotating helium dewar tank

The generalized mathematical formulation of sloshing dynamics for partially filled liquid of cryogenic superfluid helium II in dewar containers driven by both the gravity gradient and jitter accelerations applicable to scientific spacecraft which is eligible to carry out spinning motion and/or slew motion for the purpose to perform scientific observation during the normal spacecraft operation are investigated. An example is given with Gravity Probe-B (GP-B) spacecraft which is responsible for the sloshing dynamics. The jitter accelerations include slew motion, spinning motion, atmospheric drag on the spacecraft, spacecraft attitude motions arising from machinery vibrations, thruster firing, pointing control of spacecraft, crew motion, etc. Explicit mathematical expressions to cover these forces acting on the spacecraft fluid systems are derived. The numerical computation of sloshing dynamics were based on the non-inertia frame spacecraft bound coordinate, and solve time dependent, three-dimensional formulations of partial differential equations subject to initial and boundary conditions. The explicit mathematical expressions of boundary conditions to cover capillary force effect on the liquid vapor interface in microgravity environments are also derived. The formulations of fluid moment and angular moment fluctuations in fluid profiles induced by the sloshing dynamics, together with fluid stress and moment fluctuations exerted on the spacecraft dewar containers were derived. Results were widely published in the open journals.

Hung, R. J.↗
NASA NTRS1989

A computational fluid dynamics algorithm on a massively parallel computer

The implementation and performance of a finite-difference algorithm for the compressible Navier-Stokes equations in two or three dimensions on the Connection Machine are described. This machine is a single-instruction multiple-data machine with up to 65536 physical processors. The implicit portion of the algorithm is of particular interest. Running times and megadrop rates are given for two- and three-dimensional problems. Included are comparisons with the standard codes on a Cray X-MP/48.

Jespersen, Dennis C.↗
DOE OSTI2025

Asymptotic-preserving dynamical low-rank method for the stiff nonlinear Boltzmann equation

In kinetic theory, numerically solving the full Boltzmann equation is extremely expensive. This is because the Boltzmann collision operator involves a high-dimensional, nonlinear integral that must be evaluated at each spatial grid point and every time step. The challenge becomes even more pronounced in the fluid (strong collisionality) regime, where the collision operator exhibits strong stiffness, causing explicit time integrators to impose severe stability restrictions. In this paper, we propose addressing this problem through a dynamical low-rank (DLR) approximation. The resulting algorithm requires evaluating the Boltzmann collision operator only r 2 times, where r, the rank of the approximation, is much smaller than the number of spatial grid points. We propose a novel DLR integrator, called the XL integrator, which reduces the number of steps compared to the available alternatives (such as the projector splitting or basis update & Galerkin (BUG) integrator). For a class of problems including the Boltzmann collision operator which enjoys a separation property between physical and velocity space, we further propose a specialized version of the XL integrator, called the sXL integrator. This version requires solving only one differential equation to update the low-rank factors. Furthermore, the proposed low-rank schemes are asymptotic-preserving, meaning they can capture the asymptotic fluid limit in the case of strong collisionality. Our numerical experiments demonstrate the efficiency and accuracy of the proposed methods across a wide range of regimes, from non-stiff (kinetic) to stiff (fluid).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

A large deformation multiphase continuum mechanics model for shock loading of soft porous materials

A large deformation, coupled finite-element (FE) model is developed to simulate the multiphase response of soft porous materials subjected to high strain-rate loading. The approach is based on the theory of porous media (TPM) at large deformations. Simplifications to the one-dimensional regime studied in the numerical simulations follow. An overview of several different time integration schemes is presented for the purpose of solving the nonlinear dynamic coupled balance of momenta (mixture and fluid) and balance of mass of the mixture equations. Numerical examples are presented for (i) verification against closed-form analytical solutions assuming small loads, (ii) demonstrating large deformation effects at high strain-rate, and (iii) showing differences in deformations between a single-phase elastodynamics model with occluded compressible pore fluid and a multiphase poroelastodynamics model at high strain-rate. The multiphase model shows that the relative motion of the pore fluid significantly dampens the deformation response of the solid skeleton as compared to the single-phase model, and makes it possible to extract quantitative values for the stresses of the different constituents, thereby allowing one to form preliminary conclusions about the onset of damage in the solid skeleton. The novelty of the current work is developing a multiphase, large deformation, mixture theory numerical model for high strain-rate loading of soft porous materials. It was discovered that explicit, adaptive time-stepping Runge–Kutta schemes offer high accuracy at relatively low cost when compared to traditional implicit or explicit central difference time-stepping schemes for shock-like loadings. Here, shock viscosity is added to the mixture momentum balance equation to regularize the shock front, and a stabilization term is added to the mixture mass balance equation to stabilize equal order interpolation finite elements for the coupled finite element solution of multiphase materials.

Engineering↗
DOE OSTI2024

Coupled model for liquid lithium plasma facing components

Numerical analysis provides the design choice and operating window of liquid metal Plasma Facing Components (PFC) concepts. Coupled analysis of boundary plasma together with the surrounding boundary structures is required. Here, to achieve this goal, PPPL is developing a comprehensive multi-physics model for modeling of PFCs in fusion devices. The model includes the fluid-kinetic code SOLPS-ITER and the flow and heat transfer code CFX from ANSYS. SOLPS-ITER was augmented with a liquid metal boundary condition algorithm, allowing direct two-way coupling of the plasma analysis with the two-dimensional analytical slab flow model which includes heat convection in the liquid metal PFC. The target heat flux resulting from this coupled analysis is used as a boundary condition for detailed 3D Computational Fluid Dynamics (CFD) Magneto Hydro Dynamics (MHD) and heat transfer analysis. A new formulation of MHD equations is introduced in the numerical procedure ensuring current conservation of the discretized equations. Results of the 3D analysis are used for final validation of the coupled model. A PFC design where a porous wall is used to stabilize the liquid metal surface, while MHD drive is used to push the liquid metal flow inside the PFC, will be investigated in the regimes where vapor shielding is created for enhanced volumetric plasma heat dissipation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Investigation of theoretical scaling laws using large eddy simulations for airborne spreading of viral contagion from sneezing and coughing

Using a set of large eddy point-particle simulations, we explore the fluid dynamics of an ejected puff resulting from a cough/sneeze. The ejection contains over 61,000 potentially virus-laden droplets at an injection Reynolds number of about 46,000, comparable to an actual cough/ sneeze. We observe that global puff properties, such as centroid, puff volume, momentum, and buoyancy vary little across realizations. Other properties, such as maximum extent, shape, and edge velocity of the puff, may exhibit substantial variation. In many realizations, a portion of the puff splits off and advances along a random direction, while keeping airborne droplet nuclei afloat. This peeled-off portion provides a mechanism for virus-laden droplets to travel over large distances in a short amount of time. We also observe that the vast majority of droplets remain suspended within the puff after all liquid has evaporated. The main objectives of the study are to (i) evaluate assumptions of Balachandar’s et al. theory [Int. J. Multiphase Flow 132, 103439 (2020)], which include buoyancy effects, shape of the puff, and droplet evaporation rate, (ii) obtain values of closure parameters, which include location and time of the virtual origin, and puff entrainment and drag coefficients, and (iii) evaluate the accuracy of the theory in predicting the shape, size, and location of the puff, as well as droplet number density long after ejection. The theory adequately predicts global puff properties including size, velocity, and distance traveled, the largest size of droplets that exit the puff due to settling, and the droplet size distribution within the puff long after ejection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Impact of impurities on peeling–ballooning modes and turbulence in tokamak plasmas

This study investigates the impact of various impurity species on peeling–ballooning (PB) modes and microturbulence in tokamak plasmas through the extension of traditional two-fluid and gyro-landau-fluid (GLF) models. By incorporating finite Larmor radius (FLR) effects, the analysis provides a comprehensive understanding of impurity-driven impact and its interaction with plasma turbulence. Depending on charge state and local plasma conditions, heavy impurities may exhibit gyro-radii larger than those of main ions, which are captured in the extended GLF model presented. Following the presentation of modified two-fluid equations incorporating impurity effects, we systematically analyze the distinctions between impurity and main ion dynamics and their resultant feedback mechanisms on plasma behavior. Derivation of the linear dispersion relation enables quantification of impurity-mediated modifications to: plasma vorticity, diamagnetic drift and gyroviscous effects, electron Hall physics, and FLR effects. BOUT++ – based linear simulations corroborate this formalism, demonstrating systematic stabilization of PB modes upon impurity seeding. And then operational implications for practical impurity control strategies in tokamak devices are proposed. The results underscore the necessity of impurity management to maintain stability and optimize plasma confinement, with specific focus on how FLR effects contribute to transport dynamics. This work paves the way for enhanced modeling and simulation efforts, supporting the development of strategies to control impurity-induced turbulence and improve overall reactor performance.

BOUT++ simulation↗
DOE OSTI2025

High-Resolution Simulations of Geological CO 2 Injection: Application to the SPE11 Benchmark

Geological carbon sequestration (GCS) will play a critical role in decarbonization and in facilitating the transition to clean energy systems. Because CO 2 is highly mobile, ensuring its safe and permanent injection into subsurface geological formations involves monitoring over larger spatial domains and longer time periods than is typical for hydrocarbon reservoirs. This can benefit from simulation tools capable of modeling key CO 2 trapping mechanisms, particularly those optimized for speed and scalability on high-performance computing systems. Using isothermal versions of the SPE11B and SPE11C benchmark cases, we conduct a mesh refinement study simulating CO 2 injection into kilometer-scale rock formations at centimeter resolution with the GEOS open-source simulation framework. We focus on how mesh refinement improves the accuracy of convective mixing in both 2D and 3D simulations. The computational costs associated with achieving a converged solution highlight the need for predictive upscaling techniques. A systematic performance scaling analysis—including both central processing unit (CPU) and graphics processing unit (GPU) architectures—complements the “Results” section.

Geosciences↗
DOE OSTI2025

Linear Velocity Problems Part 2: Thermodynamic Considerations

A compressible polytropic gas, in one dimensional planar, cylindrical, or spherical coordinate systems, is examined through four thermodynamic properties: mass density, pressure, specific internal energy (SIE), and entropy, under the assumptions that the fluid velocity is linearly proportional to the radial coordinate and that the Euler gas dynamics equations assert a self similar solution class. The behavior of the thermodynamics is almost entirely determined by an arbitrary function that results from the derivation of the density distribution. Through physical and other arguments, the arbitrary function can be plotted spatially with time profiles, providing a deeper understanding of the system and how the arbitrary function affects the behavior of the compressible gas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗