Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Measuring the electron density gradients of dense plasmas by deflectometry using short-wavelength probe

A new and simple experimental technique for the measurement of electron density gradients in dense laser-produced plasmas using an electromagnetic wave probe is presented. The main advantage of this method is the low requirements on coherence of the probing beam. The method is based on measuring the deformation of the Talbot pattern of a two-dimensional grating that stems from the distortion of the probe beam wave-front caused by the gradients of the index of refraction. The compromise between spatial resolution and sensitivity for the given wavelength of the probe beam is set by the experimental design. The proposed technique was experimentally verified on plasmas that were created by either a point focus or a line focus of a laser interacting with various solid targets. In the experiments reported here, all plasmas were probed by a Ne-like Zn x-ray laser beam at 21.2 nm, but the technique is applicable for any wavelength of the probe.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Densities in Solar Flare Loops, Chromospheric Evaporation Upflows, and Acceleration Sites

We compare electron densities measured at three different locations in solar flares: (1) in Soft X-Ray (SXR) loops, determined from SXR emission measures and loop diameters from Yohkoh Soft X-Ray Telescope maps (n(sub e, sup SXR) = (0.2-2.5) x 10(exp 11)/ cu cm); (2) in chromospheric evaporation upflows, inferred from plasma frequency cutoffs of decimetric radio bursts detected with the 0.1-3 GHz spectrometer Phoenix of ETH Zuerich (n(sub e, sup upflow) = (0.3-11) x 10(exp 10)/cu cm; and (3) in acceleration sites, inferred from the plasma frequency at the separatrix between upward-accelerated (type III bursts) and downward-accelerated (reverse-drift bursts) electron beams [n(sub e, sup acc) = (0.6-10) x 10(exp 9)/cu cm]. The comparison of these density measurements, obtained from 44 flare episodes (during 14 different flares), demonstrates the compatibility of flare plasma density diagnostics with SXR and radio methods. The density in the upflowing plasma is found to be somewhat lower than in the filled loops, having ratios in a range n(sub e, sup upflow)/n(sub e, sup SXR) = 0.02-1.3, and a factor of 3.6 higher behind the upflow front. The acceleration sites are found to have a much lower density than the SXR-bright flare loops, i.e., n(sub e, sup acc)/n(sub e, sup SXR) = 0.005- 0.13, and thus must be physically displaced from the SXR-bright flare loops. The scaling law between electron time-of-flight distances l' and loop half-lengths s, l'/s = 1.4 +/- 0.3, recently established by Aschwanden et al. suggests that the centroid of the acceleration region is located above the SXR-bright flare loop, as envisioned in cusp geometries (e.g., in magnetic reconnection models).

Aschwanden, Markus J.↗

Accelerating Embedding Potential Optimization by Reconstructing the Pseudo-Valence Electron Density

Density functional embedding theory (DFET) enables use of electronic structure methods with higher accuracy than density functional theory in a local region, with applications thus far ranging from (photo/electro)catalysis to reactions in solution. DFET partitions a large collection of atoms into smaller groups that interact via a shared embedding (interaction) potential V emb , determined via functional optimization. The optimized effective potential (OEP) process used to optimize V emb is time-consuming and becomes a computational bottleneck due to sharp, oscillating features of V emb near nuclei. Here, similar to pseudopotential theory, by reconstructing electron densities used in the OEP process from smoother pseudo-valence-only (PVO) electron densities as proxies for total densities of the full system and subsystems, we can retain accuracy in the embedded electronic structure calculations while potentially reducing the overhead of V emb construction, within the projector augmented-wave (PAW) formalism. We explore three different chemical reactions as exemplars to test PVO–DFET, namely, H 2 dissociative adsorption on a Cu(111) surface, H 2 O adsorption on a Pt(111) surface, and aqueous [Ca 2+ –SO 4 2– ] ion-pair formation. The PVO approximation works well for all three systems with minimal loss of accuracy (∼10–70 meV error relative to the original exact-derivative (ED) approach) while accelerating V emb generation for the Cu and Pt systems respectively by 20× and 5×. Given proper numerical convergence parameters, the spatial distributions of differences between PVO- and ED-based V emb outside the core regions are small, explaining the exceptional agreement between the two approaches. Finally, we anticipate that this more efficient PVO–DFET approximation will be useful whenever computation of V emb is much more expensive than subsequent embedded high-level electron correlation calculations.

approximation↗

Vibronic properties of organic semiconductors based on phthalocyanine complexes with asymmetrically distributed electron density

This study is concerned with the optical properties of organic semiconductors based on lanthanide (III) biphthalocyanine and triphthalocyanine complexes with asymmetrically distributed electron density. The {sup Cl}PcLu{sup tBu}Pc biphthalocyanine and {sup Cl}PcEu{sup Bu}PcLu{sup Bu}Pc triphthalocyanine solid films ({sup Cl}Pc = 2, 3, 9, 10, 16, 17, 23, 24-octachlorophthalocyaninate, {sup tBu}Pc = 2(3), 9(10), 16(17), 23(24)-tetra- tretbutylphthalocyani-nate, {sup Bu}Pc = 2, 3, 9, 10, 16, 17, 23, 24-octabutylphthalo cyaninate) are fabricated, and their transmittance spectra in the middle infrared region are studied. Analysis of the transmittance spectra shows that the addition of complexity to phthalocyanine molecules yields some changes in the spectra. Specifically, the isoindole group can exhibit vibronic properties in the form of four absorption lines in the range 1400-1450 cm{sup -1}. New absorption lines that may be due to chlorine-carbon bonds are observed in the far-infrared region.

36 MATERIALS SCIENCE↗

SU-F-T-430: Validation of IBEAM Evo Couch Top for Different Relative Electron Density (RED) Combination During Photon Beam Dose Calculation in Monaco− Treatment Planning System

Purpose: Validation of iBEAM™ evo couch-top for different relative electron density (RED) combination during photon beam dose calculation in Monaco− TPS. Methods: The iBEAM™ evo couch-top has two layers:outer carbon fiber (CF) and inner foam core (FC). To study the beam intensity attenuation of couch-top, measured doses were compared with doses calculated for different REDs. Measurements were performed in solid water phantom with PTW-0.125cc ion-chamber positioned at center of the phantom with 5.3cm thickness slabs placed above and below the chamber. Similarly, in TPS, iBEAM™ evo couch-top was simulated and doses were calculated for different RED combinations (0.2CF-0.2FC, 0.4CF-0.2FC, 0.6CF-0.2FC, 0.8CF-0.2FC, and 1.0CF-0.2FC) by using Monte Carlo dose calculation algorithm in Monaco TPS (V5.1). Doses were measured for every 10 degree gantry angle separation, 10×10cm{sup 2} field size and 6MV photons. Then, attenuation is defined as the ratio of output at posterior gantry angle to output of its opposed anterior gantry angle (e.g.225°/45°). output fluctuation with different gantry angle was within ±0.21%. To confirm above results, dose-planes were measured for five pelvic VMAT plans (360°arc) in PTW two-dimensional array and compared with different calculated dose-planes of above-mentioned couch REDs. Gamma pass rates<1.00) were analyzed for 3%/2mm criteria. Results: Measured and calculated attenuation was in good agreement for the RED combination of 0.2CF-0.2FC and difference was within ±0.515%. However, other density combination showed difference of ±0.9841%, ±1.667%, ±2.9241% and ±2.8832% for 0.4CF-0.2FC, 0.6CF-0.2FC, 0.8CF-0.2FC, and 1.0CF-0.2FC, respectively. Maximum couch-top attenuation was observed at 110°–120° and 240°–250° and decreases linearly as the gantry angle approaches 180°. Moreover, gamma pass rate confirmed the above results and showed maximum pass rate of 96.23% for 0.2CF-0.2FC, whereas others were 95.72%, 95.12%, 94.31% and 93.24%. Conclusion: RED value of 0.2CF-0.2FC was found to be suitable for accurate couch-top modeling for 6MV photon beam Monte Carlo calculations in Monaco TPS.

07 ISOTOPE AND RADIATION SOURCES↗

Three-dimensional structure of electron density fluctuations in the Hall thruster plasma: ExB mode

Collective scattering measurements have been conducted on the plasma of a Hall thruster, in which the electron density fluctuations are fully characterized by the dynamic form factor. The dynamic form factor amplitude distribution has been measured depending on the k-vector spatial and frequency components at different locations. Fluctuations are seen as propagating waves. The largest amplitude mode propagates nearly along the cross-field direction but at a phase velocity that is much smaller than the ExB drift velocity. Refined directional analysis of this largest amplitude mode shows a thin angular emission diagram with a mean direction that is not strictly along the ExB direction but at small angles near it. The deviation is oriented toward the anode in the (E,ExB) plane and toward the exterior of the thruster channel in the (B,ExB) plane. The density fluctuation rate is on the order of 1%. These experimentally determined directional fluctuation characteristics are discussed with regard to the linear kinetic theory model and particle-in-cell simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The separatrix electron density in JET, ASDEX upgrade and alcator C-Mod H-mode plasmas: A common evaluation procedure and correlation with engineering parameters

The separatrix electron density is an important parameter for core-edge scenario integration in tokamak devices, as it influences plasma confinement, divertor detachment and disruption avoidance. This quantity has been measured in H-mode discharges on JET, ASDEX Upgrade and Alcator C-Mod by applying the same fitting function to Thomson scattering measurements, and by employing the same analysis technique based on scrape-off layer power balance. To estimate the power crossing the separatrix, the inter-ELM time derivative of the plasma energy d W /d t has been experimentally evaluated and found to be approximately a constant fraction of the absorbed heating power. Correlations between n e,sep and engineering parameters have been investigated, revealing that n e,sep scales with the divertor neutral pressure p 0,div in a similar manner across all devices. Additionally, when n e,sep is normalized to the obtained n e,sep dependency, no clear correlation with the plasma current is found. These observations are in agreement with the 2-point model, which suggests that the upstream separatrix density is mainly set by the recycling at the divertor target.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser absorption measurements of electron density in nanosecond-scale atmospheric pressure pulsed plasmas

We report on time-resolved measurements of electron number density by continuous-wave laser absorption in a low-energy nanosecond-scale laser-produced spark in atmospheric pressure air. Laser absorption is a result of free-free and bound-free electron excitation, with the absorption coefficient modeled and evaluated using estimates of the time-variation in electron temperature and probe laser absorption path length. Plasma electron number densities are determined to be as high as n e = 7 x 10 19 cm -3 , and decay to 1/e of their peak values over a period of about 50 ns following plasma formation using a 20 mJ, 10 ns pulse width frequency-doubled Nd:YAG laser. The measured plasma densities at later times are shown to be in reasonable agreement with Stark broadening measurements of the 3s[ 5 S o ]-3p[ 5 P] electronic transition in atomic oxygen at 777 nm. This study provides support for the use of such continuous wave laser absorption for time resolved electron density measurements in low energy spark discharges in air, provided that an estimate of the electron temperature and laser path length can be made by accompanying diagnostics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗