SEARCH · Engineering Papers

Results for “dynamic strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Gamma radiation effects on the dynamic fatigue measurements of glass discs

Circular specimens of low iron soda lime silicate glass were blasted with grit after having a circular notch etched into their centers. After separation into two groups, one group was exposed to gamma radiation. The fracture strengths of all samples were then tested by the biaxial technique, i.e., specimens were balanced on three balls and loaded in the center by a piston. The irradiated samples had received a 140,000 Gy dose from a Co-60 source. An enhanced interaction between the ambient moisture and the grit-blasted central notch was observed in the irradiated samples, which displayed accelerated corrosion.

Ananaba, T. O. J.↗

NASA NTRS1978

Semiclassical theory of unimolecular dissociation induced by a laser field

A semiclassical nonperturbative theory of direct photodissociation in a laser field is developed in which photon absorption and dissociation are treated in a unified fashion. This is achieved by visualizing nuclear dynamics as a representative particle moving on electronic-field surfaces. Methods are described for calculating dissociation rates and probabilities by Monte Carlo selection of initial conditions and integration of classical trajectories on these surfaces. This unified theory reduces to the golden rule expression in the weak-field and short-time limits, and predicts nonlinear behavior, i.e., breakdown of the golden rule expression in intense fields. Field strengths above which lowest-order perturbation theory fails to work have been estimated for some systems. Useful physical insights provided by the electronic-field representation have been illustrated. Intense field effects are discussed which are amenable to experimental observation. The semiclassical methods used here are also applicable to multiple-surface dynamics in fieldfree unimolecular and bimolecular reactions.

Yuan, J.-M.↗

NASA NTRS1973

The planet Venus - A new periodic spectrum variable.

The apparent strength of CO2 absorptions in the spectrum of Venus varies by 20% in a period of 4 days. The variations are synchronous over the disk, and thus represent a fundamental dynamical mode of the atmosphere.

Young, L. G.↗

NASA NTRS1976

Thermal and Structural Analysis of Helicopter Transmission Housings Using NASTRAN

The application of NASTRAN to improve the design of helicopter transmission housings is described. A finite element model of the complete forward rotor transmission housing for the Boeing Vertol CH-47C helicopter was used to study thermal distortion and stress, stress and deflection due to static and dynamic loads, load paths, and design optimization by the control of structural energy distribution. The analytical results are correlated with test data and used to reduce weight and to improve strength, service life, failsafety, and reliability. The techniques presented, although applied herein to helicopter transmissions, are sufficiently general to be applicable to any power transmission system.

Howells, R. W.↗

NASA NTRS1980

Doppler radar observations of the three-dimensional turbulent structure of a quasi-steady thunderstorm

The spatial patterns and temporal evolution of Doppler radar-inferred turbulence within a quasi-steady, left-moving thunderstorm are reported. An organized downdraft circulation was observed, which maintained a persistent, continuously-propagating, anticyclonic and turbulent updraft. The updrafts attained peak speeds of 25 m/s, and maximum estimated reflectivity factors exhibited peak magnitudes of 50-55 dBZ. Mechanical and buoyant production appeared to be the primary generators of turbulence, although buoyancy generation may have also significantly contributed, since turbulent and dynamic entrainment into the vertically accelerating updraft was appreciable below the strongest turbulent activity at 7 km. Patterns of the radial shears of radial velocity exhibited a significant decrease in strength and areal coverage as the storm weakened, which is attributed to decreased activity of large turbulent eddies and the diminution of large-scale mean wind gradients produced by vertical exchanges of horizontal momentum and strong updraft gradients.

Knupp, K. R.↗

NASA NTRS1994

Accelerated panel methods using the fast multipole method

Panel methods are commonly used in computational fluid dynamics for the solution of potential flow problems. The methods are a numerical technique based on the surface distribution of singularity elements. The solution is the process of finding the strength of the singularity elements distributed over the body's surface. This process involves the solution of the matrix problem Pq = p' for a set of unknowns q. The Fast Multipole Method is used to directly compute q without using matrix solvers. The algorithm works in O(N) time for N points, a great improvement over standard matrix solvers. In panel methods, the surface of a body is divided into a series of quadrilateral panels. The methods involve the computation of the influence of all other panels on each individual panel. The influence is based on the surface distribution, though this can be approximated by the area for distant panels. An alternative approximation, though with arbitrary accuracy, is to develop a multipole expansion about the center of the panel to describe the effect of a given panel on distant points in space. The expansion is based on the moments of the panel, thus allow the use of various surface distributions without changing the basic algorithm, just the computation of the various moments. The expansions are then manipulated in a tree walk to develop Taylor series expansions about a point in space which describe the effect of all distant panels on any point within a volume of convergence. The effect of near panels then needs to be computed directly, but the effect of all distant panels can be computed by simply evaluating the resulting expansion. The Fast Multipole Method has been applied to panel methods for the solution of source and doublet distributions. A major feature of the algorithm is that the algorithm does not change to derive the potential and velocity for sources and doublets. The same expansions can be used for both sources and doublets. Since the velocity is related to the potential, and the doublet potential is related to the z-component of the source velocity, all values can be derived from the same expansion by taking a series of partial derivatives. This requires more expansion terms to be kept since terms are lost in the process of taking partial derivatives. Thus to maintain accuracy for the doublet computation, more terms are required than if just evaluating for sources. The resulting Fast Multipole code should then parallelize better than classical panel methods due to the locality of data dependencies found in the Fast Multipole Method. Theoretically the parallelized code should execute in O(log N) time with O(N) processors, though this is not practical. Ongoing work includes implementing the parallel accelerated panel method, including methods to improve the load balancing of the problem by taking advantage of the known geometry of panels, and to encorporate sensitivity analysis into the algorithm.

Leathrum, James F., Jr.↗

NASA NTRS2017

Predictive Modeling of Fast-Curing Thermosets in Nozzle-Based Extrusion

This work presents an approach to modeling the dynamic spreading and curing behavior of thermosets in nozzle-based extrusions. Thermosets cover a wide range of materials, some of which permit low-temperature processing with subsequent high-temperature and high-strength working properties. Extruding thermosets may overcome the limited working temperatures and strengths of conventional thermoplastic materials used in additive manufacturing. This project aims to produce technology for the fabrication of thermoset-based structures leveraging advances made in nozzle-based extrusion, such as fused deposition modeling (FDM), material jetting, and direct writing. Understanding the synergistic interactions between spreading and fast curing of extruded thermosetting materials will provide essential insights for applications that require accurate dimensional controls, such as additive manufacturing [1], [2] and centrifugal coating/forming [3]. Two types of thermally curing thermosets -- one being a soft silicone (Ecoflex 0050) and the other being a toughened epoxy (G/Flex) -- served as the test materials in this work to obtain models for cure kinetics and viscosity. The developed models align with extensive measurements made with differential scanning calorimetry (DSC) and rheology. DSC monitors the change in the heat of reaction, which reflects the rate and degree of cure at different crosslinking stages. Rheology measures the change in complex viscosity, shear moduli, yield stress, and other properties dictated by chemical composition. By combining DSC and rheological measurements, it is possible to establish a set of models profiling the cure kinetics and chemorheology without prior knowledge of chemical composition, which is usually necessary for sophisticated mechanistic modeling. In this work, we conducted both isothermal and dynamic measurements with both DSC and rheology. With the developed models, numerical simulations yielded predictions of diameter and height of droplets, along with width and height of extruded lines cured at varied temperatures. Experimental results carried out on a goniometric platform and a nozzle-based 3D printer showed agreement with the numerical simulations. Finally, this presentation will show how the models are adaptable to the planning of tool paths and designs in additive manufacturing.

Xie, Jingjin↗

NASA NTRS2020

A Framework for Understanding and Quantifying the Loss and Acceleration of Relativistic Electrons in the Outer Radiation Belt During Geomagnetic Storms

We present detailed analysis of the global relativistic electron dynamics as measured by total radiation belt content (RBC) during coronal mass ejection (CME) and corotating interaction region (CIR)-driven geomagnetic storms. Recent work has demonstrated that the response of the outer radiation belt is consistent and repeatable during geomagnetic storms. Here we build on this work to show that radiation belt dynamics can be divided into two sequential phases, which have different solar wind dependencies and which when analyzed separately reveal that the radiation belt responds more predictably than if the overall storm response is analyzed as a whole. In terms of RBC, in every storm we analyzed, a phase dominated by loss is followed by a phase dominated by acceleration. Analysis of the RBC during each of these phases demonstrates that they both respond coherently to solar wind and magnetospheric driving. However, the response is independent of whether the storm response is associated with either a CME or CIR. Our analysis shows that during the initial phase, radiation belt loss is organized by the location of the magnetopause and the strength of Dst and ultralow frequency wave power. During the second phase, radiation belt enhancements are well organized by the amplitude of ultralow frequency waves, the auroral electroject index, and solar wind energy input. Overall, our results demonstrate that storm time dynamics of the RBC is repeatable and well characterized by solar wind and geomagnetic driving, albeit with different dependencies during the two phases of a storm.

Kyle R. Murphy↗

NASA NTRS2001

Stirling Technology Development at NASA GRC

The Department of Energy, Stirling Technology Company (STC), and NASA Glenn Research Center (NASA Glenn) are developing a free-piston Stirling convertor for a high efficiency Stirling Radioisotope Generator (SRG) for NASA Space Science missions. The SRG is being developed for multimission use, including providing electric power for unmanned Mars rovers and deep space missions. NASA Glenn is conducting an in-house technology project to assist in developing the convertor for space qualification and mission implementation. Recent testing of 55-We Technology Demonstration Convertors (TDCs) built by STC includes mapping of a second pair of TDCs, single TDC testing, and TDC electromagnetic interference and electromagnetic compatibility characterization on a nonmagnetic test stand. Launch environment tests of a single TDC without its pressure vessel to better understand the convertor internal structural dynamics and of dual-opposed TDCs with several engineering mounting structures with different natural frequencies have recently been completed. A preliminary life assessment has been completed for the TDC heater head, and creep testing of the IN718 material to be used for the flight convertors is underway. Long-term magnet aging tests are continuing to characterize any potential aging in the strength or demagnetization resistance of the magnets used in the linear alternator (LA). Evaluations are now beginning on key organic materials used in the LA and piston/rod surface coatings. NASA Glenn is also conducting finite element analyses for the LA, in part to look at the demagnetization margin on the permanent magnets. The world's first known integrated test of a dynamic power system with electric propulsion was achieved at NASA Glenn when a Hall-effect thruster was successfully operated with a free-piston Stirling power source. Cleveland State University is developing a multidimensional Stirling computational fluid dynamics code to significantly improve Stirling loss predictions and assist in identifying convertor areas for further improvements. This paper will update the status and results for these efforts.

Thieme, Lanny G.↗

NASA NTRS1972

Design and test of porous-tungsten mercury vaporizers

New design requirements for porous plug-type vaporizers used with Kaufman thrusters and thruster arrays are discussed. The results of testing samples of porous tungsten for mercury flow rate, liquid intrusion pressure level, and mechanical strength are presented. Nitrogen gas was used instead of mercury vapor for approximate calibration. Liquid intrusion pressure levels will require that flight thruster systems with long feedlines have restrictions in the dynamic line during launch.

Kerslake, W. R.↗

NASA NTRS1930

Determination of the Maximum Control Forces and Attainable Quickness in the Operation of Airplane Controls

This report is intended to furnish bases for load assumptions in the designing of airplane controls. The maximum control forces and quickness of operation are determined. The maximum forces for a strong pilot with normal arrangement of the controls is taken as 1.25 times the mean value obtained from tests with twelve persons. Tests with a number of persons were expected to show the maximum forces that a man of average strength can exert on the control stick in operating the elevator and ailerons and also on the rudder bar. The effect of fatigue, of duration and of the nature (static or dynamic) of the force, as also the condition of the test subject (with or without belt) were also considered.

Hertel, Heinrich↗

NASA NTRS2000

Implementation of a Compressor Face Boundary Condition Based on Small Disturbances

A compressor-face boundary condition that models the unsteady interactions of acoustic and convective velocity disturbances with a compressor has been implemented into a three-dimensional computational fluid dynamics code. Locally one-dimensional characteristics along with a small-disturbance model are used to compute the acoustic response as a function of the local stagger angle and the strength and direction of the disturbance. Simulations of the inviscid flow in a straight duct, a duct coupled to a compressor, and a supersonic inlet demonstrate the behavior of the boundary condition in relation to existing boundary conditions. Comparisons with experimental data show a large improvement in accuracy over existing boundary conditions in the ability to predict the reflected disturbance from the interaction of an acoustic disturbance with a compressor.

Slater, John W.↗

NASA NTRS2007

Enhanced Elliptic Grid Generation

An enhanced method of elliptic grid generation has been invented. Whereas prior methods require user input of certain grid parameters, this method provides for these parameters to be determined automatically. "Elliptic grid generation" signifies generation of generalized curvilinear coordinate grids through solution of elliptic partial differential equations (PDEs). Usually, such grids are fitted to bounding bodies and used in numerical solution of other PDEs like those of fluid flow, heat flow, and electromagnetics. Such a grid is smooth and has continuous first and second derivatives (and possibly also continuous higher-order derivatives), grid lines are appropriately stretched or clustered, and grid lines are orthogonal or nearly so over most of the grid domain. The source terms in the grid-generating PDEs (hereafter called "defining" PDEs) make it possible for the grid to satisfy requirements for clustering and orthogonality properties in the vicinity of specific surfaces in three dimensions or in the vicinity of specific lines in two dimensions. The grid parameters in question are decay parameters that appear in the source terms of the inhomogeneous defining PDEs. The decay parameters are characteristic lengths in exponential- decay factors that express how the influences of the boundaries decrease with distance from the boundaries. These terms govern the rates at which distance between adjacent grid lines change with distance from nearby boundaries. Heretofore, users have arbitrarily specified decay parameters. However, the characteristic lengths are coupled with the strengths of the source terms, such that arbitrary specification could lead to conflicts among parameter values. Moreover, the manual insertion of decay parameters is cumbersome for static grids and infeasible for dynamically changing grids. In the present method, manual insertion and user specification of decay parameters are neither required nor allowed. Instead, the decay parameters are determined automatically as part of the solution of the defining PDEs. Depending on the shape of the boundary segments and the physical nature of the problem to be solved on the grid, the solution of the defining PDEs may provide for rates of decay to vary along and among the boundary segments and may lend itself to interpretation in terms of one or more physical quantities associated with the problem.

Kaul, Upender K.↗

NASA NTRS2011

Enhanced Spectral Anisotropies Near the Proton-Cyclotron Scale: Possible Two-Component Structure in Hall-FLR MHD Turbulence Simulations

Recent analysis of the magnetic correlation function of solar wind fluctuations at 1 AU suggests the existence of two-component structure near the proton-cyclotron scale. Here we use two-and-one-half dimensional and three-dimensional compressible MHD models to look for two-component structure adjacent the proton-cyclotron scale. Our MHD system incorporates both Hall and Finite Larmor Radius (FLR) terms. We find that strong spectral anisotropies appear adjacent the proton-cyclotron scales depending on selections of initial condition and plasma beta. These anisotropies are enhancements on top of related anisotropies that appear in standard MHD turbulence in the presence of a mean magnetic field and are suggestive of one turbulence component along the inertial scales and another component adjacent the dissipative scales. We compute the relative strengths of linear and nonlinear accelerations on the velocity and magnetic fields to gauge the relative influence of terms that drive the system with wave-like (linear) versus turbulent (nonlinear) dynamics.

Ghosh, Sanjoy↗

NASA NTRS2018

Comet Hitchhiker: NIAC Phase 1 Final Report

Summary of Activities-Developed the Comet Hitchhiker concept, which is to hitch rides on small bodies (asteroids and comets) using a tethered spacecraft. (Section 2)-Identified five scientifically important missions that would be enabled or significantly benefited by the Comet Hitchhiker concept.The five mission concepts are: KBO rendezvous, Centaur rendezvous, Trojan rendezvous, Damocloid rendezvous, and Main asteroid belt tour to rendezvous with multiple (10) objects. (Section 3)-Derived the Space Hitchhike Equation, or "the rocket equation for hitchhiker", which relates the specific strength of tether, mass ratio, and V. (Section 4.1)-Performed in-depth feasibility analysis of the critical components of the concept through: Finite-element simulations of tether and spacecraft dynamics, as shown in Figure 1 (Section 4.4); Supercomputer simulations of the hypervelocity impact of harpoon on a small body, as shown in Figure 2. (Section 6)-Performed public outreach activities including the collaboration with a concept artist of the Museum of Science Fiction, exposure to media, and public presentations. (Section 8)

Deep Space↗

NASA NTRS2019

Climates of Warm Earth-like Planets. II. Rotational "Goldilocks" Zones for Fractional Habitability and Silicate Weathering

Planetary rotation rate has a significant effect on atmospheric circulation, where the strength of the Coriolis effect in part determines the efficiency of latitudinal heat transport, altering cloud distributions, surface temperatures, and precipitation patterns. In this study, we use the ROCKE-3D dynamic ocean general circulation model to study the effects of slow rotations and increased insolations on the "fractional habitability" and silicate weathering rate of an Earth-like world. Defining the fractional habitability f(sub h) to be the percentage of a planet's surface that falls in the 0 ≤ T ≤ 100 °C temperature regime, we find a moderate increase in f(sub h) with a 10% and 20% increase in insolation and a possible maximum in f(sub h) at sidereal day lengths between 8 and 32 times that of the modern Earth. By tracking precipitation and runoff, we further determine that there is a rotational regime centered on a 4 day period in which the silicate weathering rate is maximized and is particularly strongly peaked at higher overall insolations. Because of weathering's integral role in the long-term carbonate–silicate cycle, we suggest that climate stability may be strongly affected by the anticipated rotational evolution of temperate terrestrial-type worlds and should be considered a major factor in their study. In light of our results, we argue that planetary rotation period is an important factor to consider when determining the habitability of terrestrial worlds.

Atmospheric effects↗

NASA NTRS2019

Climates of Warm Earth-like Planets. II. Rotational "Goldilocks" Zones for Fractional Habitability and Silicate Weathering

Planetary rotation rate has a significant effect on atmospheric circulation, where the strength of the Coriolis effect in part determines the efficiency of latitudinal heat transport, altering cloud distributions, surface temperatures, and precipitation patterns. In this study, we use the ROCKE-3D dynamic ocean general circulation model to study the effects of slow rotations and increased insolations on the "fractional habitability" and silicate weathering rate of an Earth-like world. Defining the fractional habitability f (h) to be the percentage of a planet's surface that falls in the 0 ≤ T ≤ 100 °C temperature regime, we find a moderate increase in f (h) with a 10% and 20% increase in insolation and a possible maximum in f (h) at sidereal day lengths between 8 and 32 times that of the modern Earth. By tracking precipitation and runoff, we further determine that there is a rotational regime centered on a 4 day period in which the silicate weathering rate is maximized and is particularly strongly peaked at higher overall insolations. Because of weathering's integral role in the long-term carbonate–silicate cycle, we suggest that climate stability may be strongly affected by the anticipated rotational evolution of temperate terrestrial-type worlds and should be considered a major factor in their study. In light of our results, we argue that planetary rotation period is an important factor to consider when determining the habitability of terrestrial worlds.

atmospheric effects↗

NASA NTRSDate not supplied

Application of the MAT 213 Composite Impact Model to NASA Problems of Interest

A material model has been developed which incorporates several key capabilities which have been identified as lacking in currently available composite impact models. The material model utilizes experimentally based tabulated input to define the evolution of plasticity and damage as opposed to specifying discrete input parameters (such as modulus and strength). The material model has been implemented into LS-DYNA® as MAT 213. The model can simulate the nonlinear deformation, damage and failure that takes place in a composite under dynamic loading conditions. The deformation model utilizes an orthotropic plasticity formulation. For the damage model, the nonlinear unloading response that is observed prior to the point where the peak stress is reached can be simulated, as well as the stress degradation response that occurs after the peak stress is reached. A variety of failure models, including a generalized tabulated failure model which facilitates the utilization of general failure surfaces, have been implemented into MAT 213. Recent studies at NASA have concentrated on using MAT 213 to analyze both the impact and crush response of a variety of laminated and textile architectures. Several of these studies will be discussed in the presented paper. For example, a woven carbon/Kevlar composite is currently being examined for use in an energy absorber system for rotorcraft structures. MAT 213 analyses have been conducted to examine the ability of the model to accurately simulate the dynamic crush response of this material. Studies are also being conducted to examine the ability of MAT 213 to simulate the ballistic impact response of representative laminated and woven thermoplastic and thermoset matrix composites. NASA efforts are also concentrated on developing methods and processes for improving characterization methods and developing “best practices” for using MAT 213, a summary of which will be discussed in the paper.

Polymer Matrix Composites↗