Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drops”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Containerless drop tube solidification and grain refinement of NiAl3

The possibility of undercooling Ni-Al alloys below the liquidus in order to produce a single phase peritectic structure by containerless drop tube solidification was studied. Containerless process is a technique for both high purity contamination free studies as well as for investigating the undercooling and rapid solidification of alloys by suppression of heterogeneous nucleation on container walls. In order to achieve large undercoolings one must avoid heterogeneous nucleation of crystallization. It was shown that the Marshall Space Flight Center drop tubes ae unique facilities for containerless solidification experiments and large undercoolings are possible with some alloys. The original goal of undercooling the liquid metal well below the liquidus to the peritectic temperature during containerless free to form primarily NiAl3 was achieved. The microstructures were interesting from another point of view. The microstructure from small diameter samples is greatly refined. Small dendrite arm spacings such as these could greatly facilitate the annealing and solid state transformation of the alloy to nearly 10% NiAl3 by reducing the distance over which diffusion needs to occur. This could minimize annealing time and might make it economically feasible to produce NiAl3 alloy.

Ethridge, E. C.↗
NASA NTRS1984

Critical point wetting drop tower experiment

Preliminary results for the Critical Point Wetting CPW Drop Tower Experiment are produced with immiscible systems. Much of the observed phenomena conformed to the anticipated behavior. More drops will be needed to test the CPW theory with these immiscible systems.

Kaukler, W. F.↗
NASA NTRS1984

Cross-polar cap potential drop and the energy coupling function

A numerical model is formulated for correlations between the cross polar cap potential, the solar wind, and the AI index and compared with satellite data. The conductivity model was devised from empirically defined relationships between the Hall and Pedersen conductivities and the measured magnitude of the horizontal magnetic disturbance near College, AK. An instantaneous conductivity distribution was generated from data gathered at, e.g., six IMS meridian chain stations. A strong correlation appeared between an energy coupling function (ECF) and the polar cap potential drop. The ECF was derived from the chain station data, implying that potential drop estimates can be made from ground-based magnetometer data.

Ahn, B.-H.↗
NASA NTRS1985

Thermocapillary and Diffusocapillary Migration of a Fluid Drop

The migration of bubbles, or drops, plays an important role in many engineering science and space manufacturing problems. In material science processes as in the manufacturing of glasses, etc., gas bubbles can be formed from the by-products of chemical reactions or gas trapped in the interstices of the raw material. In the low-g environment of space, forces other than gravitational must be utilized as a bubble separation technique. It is well-known that gradients in interfacial tension on the bubbles' surface can promote droplet motion in the direction of decreasing interfacial tension and hence provide such a separation mechanism. Thus, the role of thermocapillary and diffusocapillary migration of a bubble, or drop, can be of paramount interest in materials processing in space.

Sani, R. L.↗
NASA NTRS1986

Drop tube technical tasks

Criteria, using fundamental thermochemical dynamics, were developed to assist a scientist using the Drop Tube Facility in designing a good experiment. The types of parameters involved in designing the experiments include the type of furnace, the type of atmosphere, and in general which materials are better behaved than others as determined by past experience in the facility. One of the major advantages of the facility lies in its ability to provide large undercoolings in the cooling curve during the drops. A beginning was to consider the effect of oxygen and other gases upon the amount of undercooling observed. The starting point of the thermochemistry was given by Ellingham and later transformed into what is known as the Richardson Chart. The effect of surface oxidations upon the nucleation phenomena can be observed in each specimen.

Workman, G. L.↗
NASA NTRS1985

Viscous damping of the oscillations of a rotating simple drop

The viscous damping of the small-amplitude capillary oscillations of a rotating simple drop is calculated in the small viscosity limit. The calculation concerns the case of a liquid drop in a gaseous medium, which is relevant to the space processing of materials using acoustic levitation. The method used is that of Lamb in which the inviscid solutions of the problem are used as trial functions in the energy equation to find the damping coefficient.

Lee, C. P.↗
NASA NTRS1986

Shapes of rotating free drops - Spacelab experimental results

The experimental observation of the behavior of acoustically rotated free drops in the microgravity environment of low earth orbit has yielded the first data which meet the restrictions of existing theoretical treatments. Rotating drops displayed both 'axisymmetric' and 'two-lobed' shapes in the presence and absence of applied torques. Their dimensions and general development confirm the existence of the distinct shape families and the bifurcation point between them. The data also indicate that the secular instability in the axisymmetric family occurs at a lower rotation velocity than predicted

Wang, T. G.↗
NASA NTRS1986

Spacelab 3 drop dynamics experiments

Positioning techniques using the effects of acoustic-radiation pressure were used during the Spacelab 3 flight to carry out classical fluid dynamics experiments on liquid drops freely suspended in microgravity. Quantitative results dealing with the equilibrium shapes of acoustically rotated drops, with the response to the radiation pressure forces, and finally with the experimental measurement of surface tension have been obtained.

Trinh, E. H.↗
NASA NTRS1987

Dynamics of rotating and oscillating drops

The dynamics of rotation and oscillation is investigated of a freely suspended liquid drop under the influence of surface tension and positioned inside an experimental apparatus by acoustic forces in the low acceleration environment of Spacelab 3. After a drop was observed to be spherical and stably located at the center of the chamber, it was set into rotation or oscillation by acoustic torque or modulated radiation pressure force.

Wang, T. G.↗
NASA NTRS1986

Microstructures of niobium-germanium alloys processed in inert gas in the 100 meter drop tube

The 100 meter drop tube at NASA's Marshall Space Flight Center has been used for a series of experiments with niobium-germanium alloys. These experiments were conducted with electromagnetic levitation melting in a 200 torr helium environment. Liquid alloys experienced large degrees of undercooling prior to solidification in the drop tube. Several interesting metastable structures were observed. However, the recalescence event prevented extended solid solubility of germanium in the A-15 beta phase. Liquids of eutectic composition were found to undercool in the presence of solid alpha and solid Nb5Ge3.

Bayuzick, R. J.↗
NASA NTRS1986

Quadratic resonance in the three-dimensional oscillations of inviscid drops with surface tension

The moderate-amplitude, three-dimensional oscillations of an inviscid drop are described in terms of spherical harmonics. Specific oscillation modes are resonantly coupled by quadratic nonlinearities caused by inertia, capillarity, and drop deformation. The equations describing the interactions of these modes are derived from the variational principle for the appropriate Lagrangian by expressing the modal amplitudes to be functions of a slow time scale and by preaveraging the Lagrangian over the time scale of the primary oscillations. Stochastic motions are predicted for nonaxisymmetric deformations starting from most initial conditions, even those arbitrarily close to the axisymmetric shapes. The stochasticity is characterized by a redistribution of the energy contained in the initial deformation over all the degrees of freedom of the interacting modes.

Natarajan, R.↗
NASA NTRS1986

Oscillations of a viscous compound drop

The effect of viscosity on normal mode oscillations of a compound drop is determined for a range of values of the viscosity, and the effect of a host medium is considered. The general form of the dispersion relation is derived, and numerical values are obtained for the case of an annular liquid region composed of silicon oil and with the core and host regions taken to be air. Results indicate that the sloshing mode of the compound drop is more damped than the bubble mode.

Lyell, M. J.↗
NASA NTRS1986

Solidification of Nb-Ge alloys in long drop tubes

The 30-m and 100 m-long drop tubes at the Marshall Space Flight Center have been used to obtain large undercooling in Nb-Ge alloys. Electron beam melting has been used to obtain drops approximately 2.5 mm in diam. In the 30-m tube, many specimens fell the length of the tube without solidifying, and were ultimately liquid-quenched in oil. The amount of undercooling prior to the quench was usually around 0.13 T(m). In the 100-m tube, freezing generally initiated during free fall, and the maximum undercooling was around 0.22 T(m). Microstructures were characterized by a combination of X-ray diffraction, optical microscopy, and scanning electron microscopy with energy dispersive analysis by X-rays. A variety of interesting microstructures was observed.

Bayuzick, R. J.↗
NASA NTRS1987

Drop size distribution and air velocity measurements in air assist swirl atomizer sprays

Detailed measurements of mean drop size (SMD) and size distribution parameters have been made using a Fraunhofer diffraction particle sizing instrument in a series of sprays generated by an air assist swirl atomizer. Thirty-six different combinations of fuel and air mass flow rates were examined with liquid flow rates up to 14 lbm/hr and atomizing air flow rates up to 10 lbm/hr. Linear relationships were found between SMD and liquid to air mass flow rate ratios. SMD increased with distance downstream along the center line and also with radial distance from the axis. Increase in obscuration with distance downstream was due to an increase in number density of particles as the result of deceleration of drops and an increase in the exposed path length of the laser beam. Velocity components of the atomizing air flow field measured by a laser anemometer show swirling jet air flow fields with solid body rotation in the core and free vortex flow in the outer regions.

Mao, C.-P.↗
NASA NTRS1988

Description of an oscillating flow pressure drop test rig

A test rig designed to generate heat exchanger pressure drop information under oscillating flow conditions is described. This oscillating flow rig is based on a variable stroke and variable frequency linear drive motor. A frequency capability of 120 hertz and a mean test pressure up to 15 mPA (2200 psi) allows for testing at flow conditions found in modern high specific power Stirling engines. An important design feature of this rig is that it utilizes a single close coupled dynamic pressure transducer to measure the pressure drop across the test sample. This eliminates instrumentation difficulties associated with the pressure sensing lines common to differential pressure transducers. Another feature of the rig is that it utilizes a single displacement piston. This allows for testing of different sample lengths and configurations without hardware modifications. All data acquisition and reduction for the rig is performed with a dedicated personal computer. Thus the overall system design efficiently integrates the testing and data reduction procedures. The design methodology and details of the test rig is described.

Wood, J. Gary↗
NASA NTRS1988

Free-streamline analysis of deformation and dislodging by wind force of drops on a surface

Free-streamline theory is used to analyze the deformation and dislodging by wind pressure of drops of liquid adhered by surface tension to a solid surface. The critical Weber number for droplets to be dislodged is determined as a function of advancing and receding contact angle. Graphical results for drop shape are in good agreement with observation.

Durbin, P. A.↗
NASA NTRS1988

Bubble and drop trajectories in rotating flows

The migration of bubbles or drops in a rotating liquid-filled sphere was observed under a variety of experimental conditions, and the trajectory, final equilibrium position, and shape were compared with results of analysis. It was found that small migrating bubbles or drops were spherical and, under the quasi-steady conditions employed, behaved in a predictable manner. Large migrating bubbles were nonspherical yet still behaved predictably except when close to the sphere wall. At low rotation rates, the final equilibrium position was offset from the rotation axis and stationary in the rotating liquid relative to a laboratory (inertial) reference frame. One of the bubble migration experiments was accomplished in the near-free-fall environment provided by the NASA KC-135 flight program. At higher rotation rates and under zero gravity conditions where the rotation axis is the final equilibrium position, the shape was reasonably predictable.

Ruggles, J. S.↗
NASA NTRS1988

Effect of field-aligned potential drop in a global magnetosphere-ionosphere coupling model

Effects of field-aligned potential drops on the magnetosphere-ionosphere coupling in a steady state are studied on a global ionospheric scale. It is shown that a constant-current generator can support a larger field-aligned potential drop than a constant voltage generator under similar conditions. The magnetospheric convection pattern is distorted more in the constant current generator case than in the constant voltage generator case. The main difference between a constant current generator and a constant voltage generator is found to lie in their ability to adjust the vorticity of the magnetospheric convection. The results show that a constant current generator allows the vorticity of the magnetospheric convection to adjust so that the field-aligned current can be kept constant under the loading influence of the field-aligned potential. On the other hand, a constant voltage generator by definition cannot adjust the vorticity of the magnetospheric convection to maintain the field-aligned current under the loading influence of the field-aligned potential.

Kan, J. R.↗