Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dopants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Quantifying Polaron Mole Fractions and Interpreting Spectral Changes in Molecularly Doped Conjugated Polymers

Molecular doping of conjugated polymers causes bleaching of the neutral absorbance and results in new polaron absorbance transitions in the mid and near infrared. In this report the concentration dependent changes in the spectra for a series of molecularly doped diketopyrrolopyrrole (DPP) co-polymers with a series of ultra-high electron affinity cyanotrimethylenecyclopropane-based dopants is analyzed. With these strong dopants the polaron mole fraction (Θ) reaches saturation. Analysis of the full spectrum enables separation of neutral and polaron signals and quantification of the polaron mole fraction using a simple noninteracting site model. The peak ratios for both neutral and polaron peaks change systematically with increasing polaron mole fraction for all measured polymers. Analysis of the spectral changes indicates that the polaron mole fraction can be quantified to within 5%. While the total change in the absorbance spectrum with increasing polaron mole fraction is linear, the lowest energy polaron peak (P1) grows nonlinearly, which indicates increased polarization/delocalization. Molecular doping of polymers that form either H- or J-aggregates shows systematically different spectral changes in the vibronic peak ratios of the neutral spectra and provides insights into the polymer configuration at undoped sites in the film.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Composition‐Conditioning Agent for Doped Spiro‐OMeTAD to Realize Highly Efficient and Stable Perovskite Solar Cells

Abstract The doped Spiro‐OMeTAD hole transport layer (HTL) formed using the lithium bis(trifluoromethane) sulfonimide salt and 4‐tert‐butylpyridine with phenethylammonium iodide surface treatment on a perovskite film has continuously dominated the record power conversion efficiencies (PCEs) of perovskite solar cells (pero‐SCs). However, unstable HTL compositions and iodide salts can cause severe device degradation. In this study, an HTL composition‐conditioning agent (CCA), Spiro‐BD‐2OEG, is designed, which contains a Spiro‐OMeTAD‐like backbone, functional pyridine units, and oligo (ethylene glycol) chains. This finely designed CCA presents good miscibility with Spiro‐OMeTAD and its dopants and acts as a conditioning agent through weak bond interactions. As a result, the CCA‐regulated HTL shows a pinhole‐free and smooth morphology with enhanced Spiro‐OMeTAD ordering and improves dopant stability. In addition, the gradient‐distributed CCA in the HTL can narrow the energy level offset with the valence band of the perovskite. The resultant pero‐SCs exhibit an excellent PCE of 24.19% without any interface treatment and weak size dependence. A remarkable PCE of 22.63% is obtained even for a 1.004‐cm 2 device. Importantly, the strategy shows good universality and significantly promotes the long‐term stability of the pero‐SCs based on the classical doped Spiro‐OMeTAD.

Chemistry↗
DOE OSTI2023

Observation of Weak Counterion Size Dependence of Thermoelectric Transport in Ion Exchange Doped Conducting Polymers Across a Wide Range of Conductivities

Conducting polymers are of interest for a broad range of applications from bioelectronics to thermoelectrics. The factors that govern their complex charge transport physics include the structural disorder present in these highly doped polymer films and the Coulombic interactions between the electronic charge carriers and the dopant counterions. Previous studies have shown that at low doping levels carriers are strongly trapped in the vicinity of the counterions, while at high doping levels charge transport is not limited by Coulombic trapping, which manifests itself in the conductivity being independent of the size of the dopant counterion. Here a recently developed ion exchange doping method is used to investigate the ion size dependence of a semicrystalline polythiophene–based model system across a wide range of conductivities. It is found that the regime in which the charge and thermoelectric transport is not or only weakly dependent on ion size, extends to surprisingly low conductivities. This surprising observation is explained by a heterogeneous doping that involves doping of the amorphous domains to high doping levels first before doping of the ordered, crystalline domains occurs. The study provides new insights into how the thermoelectric physics of conducting polymers evolves as a function of doping level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Gd-Ni-Sb-SnO 2 electrocatalysts for active and selective ozone production

Direct electrochemical production of dissolved ozone could potentially provide economic wastewater treatment and sanitation or a valuable chemical oxidant. Although Ni-Sb-SnO 2 electrocatalysts have the highest known faradaic efficiencies for electrochemical ozone production, the activity and selectivity are not yet sufficient for commercial implementation. This report finds that co-doping Ni and Gd increases the ozone selectivity by a factor of three over Ni alone. These findings are the first demonstration of an active dopant other than Ni in SnO 2 . Electrochemical and physical characterization show that trends in ozone activity are caused by chemical catalysis, not morphology effects, and that conduction band alignment is not a catalytic descriptor for the system. Selective radical quenching experiments and quantum chemistry calculations of thermodynamic energies suggest that the kinetic barriers to form solution-phase intermediates are important for understanding the role of dopants in electrochemical ozone production.

42 ENGINEERING↗
DOE OSTI2020

A Physical Model for Understanding the Activation of MoS 2 Basal‐Plane Sulfur Atoms for the Hydrogen Evolution Reaction

Abstract Weak binding of hydrogen atoms to the 2H‐MoS 2 basal plane renders MoS 2 inert as an electrocatalyst for the hydrogen evolution reaction. Transition‐metal doping can activate neighboring sulfur atoms in the MoS 2 basal plane to bind hydrogen more strongly. Our theoretical studies show strong variation in the degree of activation by dopants across the 3d transition‐metal series. To understand the trends in activation, we propose a model based on the electronic promotion energy required to partially open the full valence shell of a local S atom and therefore enable it to bond with a H atom. In general, the promotion is achieved through an electron transfer from the S to neighboring metal‐atom sites. Furthermore, we demonstrate a specific, electronic‐structure‐based descriptor for the hydrogen‐binding strength: Δ dp , the local interband energy separation between the lowest empty d‐states on the dopant metal atoms and occupied p‐states on S. This model can be used to provide guidelines for chalcogen activation in future catalyst design based on doped transition‐metal dichalcogenides.

Liu, Mingjie↗
DOE OSTI2020

A Physical Model for Understanding the Activation of MoS 2 Basal‐Plane Sulfur Atoms for the Hydrogen Evolution Reaction

Abstract Weak binding of hydrogen atoms to the 2H‐MoS 2 basal plane renders MoS 2 inert as an electrocatalyst for the hydrogen evolution reaction. Transition‐metal doping can activate neighboring sulfur atoms in the MoS 2 basal plane to bind hydrogen more strongly. Our theoretical studies show strong variation in the degree of activation by dopants across the 3d transition‐metal series. To understand the trends in activation, we propose a model based on the electronic promotion energy required to partially open the full valence shell of a local S atom and therefore enable it to bond with a H atom. In general, the promotion is achieved through an electron transfer from the S to neighboring metal‐atom sites. Furthermore, we demonstrate a specific, electronic‐structure‐based descriptor for the hydrogen‐binding strength: Δ dp , the local interband energy separation between the lowest empty d‐states on the dopant metal atoms and occupied p‐states on S. This model can be used to provide guidelines for chalcogen activation in future catalyst design based on doped transition‐metal dichalcogenides.

Liu, Mingjie↗
DOE OSTI2024

Controlling the Phase Transformation of Alumina for Enhanced Stability and Catalytic Properties

Current transition alumina catalysts require the presence of significant amounts of toxic, environmentally deleterious dopants for their stabilization. Herein, we report a simple and novel strategy to engineer transition aluminas to withstand aging temperatures up to 1200 °C without inducing the transformation to low-surface-area α-Al 2 O 3 and without requiring dopants. By judiciously optimizing the abundance of dominant facets and the interparticle distance, we can control the temperature of the phase transformation from θ-Al 2 O 3 to α-Al 2 O 3 and the specific surface sites on the latter. These specific surface sites provide favorable interactions with supported metal catalysts, leading to improved metal dispersion and greatly enhanced catalytic activity for hydrocarbon oxidation. Further, the results presented herein not only provide molecular-level insights into the critical factors causing deactivation and phase transformation of aluminas but also pave the way for the development of catalysts with improved activity for catalytic hydrocarbon oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tuning Local Atomic Structures in MoS 2 Based Catalysts for Electrochemical Nitrate Reduction

In recent years, there has been a substantial surge in the investigation of transition-metal dichalcogenides such as MoS 2 as a promising electrochemical catalyst. Inspired by denitrification enzymes such as nitrate reductase and nitrite reductase, the electrochemical nitrate reduction catalyzed by MoS 2 with varying local atomic structures is reported. Further, it is demonstrated that the hydrothermally synthesized MoS 2 containing sulfur vacancies behaves as promising catalysts for electrochemical denitrification. With copper doping at less than 9% atomic ratio, the selectivity of denitrification to dinitrogen in the products can be effectively improved. X-ray absorption characterizations suggest that two sulfur vacancies are associated with one copper dopant in the MoS 2 skeleton. DFT calculation confirms that copper dopants replace three adjacent Mo atoms to form a trigonal defect-enriched region, introducing an exposed Mo reaction center that coordinates with Cu atom to increase N 2 selectivity. Apart from the higher activity and selectivity, the Cu-doped MoS 2 also demonstrates remarkably improved tolerance toward oxygen poisoning at high oxygen concentration. Finally, Cu-doped MoS 2 based catalysts exhibit very low specific energy consumption during the electrochemical denitrification process, paving the way for potential scale-up operations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unusual Electrical Conductivity Enhancement in Stable n‐Type Carbon Nanotube Networks

Organic molecule-doped n-type single-walled carbon nanotube (SWCNT) networks are promising candidates for advanced energy applications, such as flexible thermoelectrics and photovoltaics. Yet charge transport in n-type SWCNTs is limited by two factors: i) charge localization impeding inter-tube transport caused by disordered mesostructure of randomly oriented SWCNTs and ii) reduction of charge carrier concentration driven by oxidation. Herein, studied the relationship between the mesostructure and thermoelectric properties of n-type SWCNTs obtained by surfactant-functionalization and polymer-dopant grafting. Surprisingly, the electrical conductivity of the polymer-doped SWCNTs keeps increasing with increasing polymer content, even after the saturation of carrier concentration, resulting in 12x higher conductivity on polymer-doping compared to surfactant-functionalization. While hopping transport typically dominates in disordered systems, it is shown that a bridging effect from the polymer causes unusual band-like conduction in polymer-doped SWCNTs. Additionally, since surfactants are essential to prevent oxidation and retain n-type over a long duration, shows that SWCNTs obtained through a dual-functionalization strategy using both polymer-dopant and surfactant, demonstrates a long-term stable high n-type thermoelectric power factor, when the surfactant amount is carefully controlled. Besides thermoelectrics, the findings are of general interest to developing stable and conductive n-type SWCNTs for various energy and electronic applications.

carbon nanotubes↗
DOE OSTI2021

Investigation of Gallium–Boron Spin-On Codoping for poly-Si/SiO x Passivating Contacts

A doping technique for p-type poly-Si/SiOx passivating contacts using a spin-on method for different mixtures of Ga and B glass solutions is presented. Effects of solution mixing ratios on the contact performance (implied open circuit voltage iV oc , contact resistivity ..rho..c) are investigated. For all as-annealed samples at different drive-in temperatures, increasing the percentage of Ga in the solution shows a decrement in iV oc (from ~680 to ~610 mV) and increment in ..rho..c (from ~3 to ~800 mO cm 2 ). After a hydrogenation treatment by depositing a SiN x /AlO x stack followed by forming gas annealing, all samples show improved iVoc (~700 mV with Ga-B co-doped, and ~720 mV with all Ga). Interestingly, when co-doping Ga with B, even a small amount of B in the mixing solution shows negative effects on the surface passivation. Active and total dopant profiles obtained by electrical capacitance voltage and secondary-ion mass spectrometry measurements, respectively, reveal a relatively low percentage of electrically-active Ga and B in the poly-Si and Si layers. Overall, these results help understand the different features of the two dopants: a low ρ c with B, a good passivation with Ga, their degree of activation inside the poly-Si and Si layers, and the annealing effects.

14 SOLAR ENERGY↗
DOE OSTI2021

Sulfur-doped graphene anchoring of ultrafine Au 25 nanoclusters for electrocatalysis

The biggest challenge of exploring the catalytic properties of under-coordinated nanoclusters is the issue of stability. We demonstrate herein that chemical dopants on sulfur-doped graphene (S-G) can be utilized to stabilize ultrafine (sub-2 nm) Au 25 (PET)18 clusters to enable stable nitrogen reduction reaction (NRR) without significant structural degradation. The Au 25 @S-G exhibits an ammonia yield rate of 27.5μgNH 3 ∙ mg Au -1 ∙ h -1 at -0.5 V with faradic efficiency of 2.3%. More importantly, the anchored clusters preserve ~ 80% NRR activity after four days of continuous operation, a significant improvement over the 15% remaining ammonia production rate for clusters loaded on undoped graphene tested under the same conditions. Isotope labeling experiments confirmed the ammonia was a direct reaction product of N 2 feeding gas instead of other chemical contaminations. Ex-situ X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy of post-reaction catalysts reveal that the sulfur dopant plays a critical role in stabilizing the chemical state and coordination environment of Au atoms in clusters. Further ReaxFF molecular dynamics (RMD) simulation confirmed the strong interaction between Au nanoclusters (NCs) and S-G. Furthermore, this substrate-anchoring process could serve as an effective strategy to study ultrafine nanoclusters’ electrocatalytic behavior while minimizing the destruction of the under-coordinated surface motif under harsh electrochemical reaction conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Segregation competition and complexion coexistence within a polycrystalline grain boundary network

Interfacial segregation can stabilize grain structures and even lead to grain boundary complexion transitions. However, understanding of the complexity of such phenomena in polycrystalline materials is limited, as most studies focus on bicrystal geometries. In this work, we investigate interfacial segregation and subsequent complexion transitions in polycrystalline Cu-Zr alloys using hybrid Monte Carlo/molecular dynamics simulations. No significant change in the grain size or structure is observed upon Zr dopant addition to a pure Cu polycrystal at moderate temperature, where grain boundary segregation is the dominant behavior. Segregation within the boundary network is inhomogeneous, with some boundaries having local concentrations that are an order of magnitude larger than the global value and others having almost no segregation, and changes to physical parameters such as boundary free volume and energy are found to correlate with dopant concentration. Further, another alloy sample is investigated at a higher temperature to probe the occurrence of widespread transitions in interfacial structure, where a significant fraction of the originally ordered boundaries transition to amorphous complexions, demonstrating the coexistence of multiple complexion types, each with their own distribution of boundary chemical composition. Overall, this work highlights that interfacial segregation and complexion structure can be diverse in a polycrystalline network. Here, the findings shown here complement existing computational and experimental studies of individual interfaces and help pave the way for unraveling the complexity of interfacial structure in realistic microstructures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bulk nanocrystalline Al alloys with hierarchical reinforcement structures via grain boundary segregation and complexion formation

Grain size engineering, particularly reducing grain size into the nanocrystalline regime, offers a promising pathway to further improve the strength-to-weight ratio of Al alloys. Unfortunately, the fabrication of nanocrystalline metals often requires non-equilibrium processing routes, which typically limit the specimen size and require large energy budgets. In this study, multiple dopant elements in ternary Al alloys are deliberately selected to enable segregation to the grain boundary region and promote the formation of amorphous complexions. Three different fully dense bulk nanocrystalline Al alloys (Al-Mg-Y, Al-Fe-Y, and Al-Ni-Y) with small grain sizes were successfully fabricated using a simple powder metallurgy approach, with full densification connected directly to the onset of amorphous complexion formation. All the compositions demonstrate densities above 99% with grain sizes <60 nm following consolidation via hot pressing at 585 °C. The very fine grain structure results in excellent mechanical properties, as evidenced by nanoindentation hardness values in the range of 2.2-2.8 GPa. Detailed microstructural characterization verifies the segregation of all dopant species to grain boundaries as well as the formation of amorphous complexions, which suggests their influential role in aiding effective consolidation and endowing thermal stability in the alloys. Moreover, nanorods with a core-shell structure are also observed at the grain boundaries, which likely contribute to the stabilization of the grain structure while also strengthening the materials. Lastly, intermetallic particles with sizes of hundreds of nanometers form in all systems. As a whole, the results presented here demonstrate a general alloy design strategy of segregation and boundary evolution pathway that enables the fabrication of multiple nanocrystalline Al alloys with hierarchical microstructures and improved performance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A critical literature review of the advances in methane dehydroaromatization over multifunctional metal-promoted zeolite catalysts

We report the drastic rise in shale gas production has encouraged the quest for alternative uses of methane as a chemical feedstock in the manufacturing industry. While two-step syngas routes for methane valorization are deployed commercially, direct one-step routes for methane conversion are attracting much attention. As steam cracking installations have shifted from using oil-based naphtha to shale-based natural gas liquids, production of aromatics has dropped. Methane dehydroaromatization (MDA) is a one-step reaction capable of valorizing methane to hydrogen and benzene. Challenges with the MDA reaction are two-fold: the reaction is thermodynamically limited with low one-pass methane conversion and even the best catalytic systems, Mo/zeolites, suffer rapid deactivation from coking. A catalyst design strategy to improve stability is the use of multifunctional Mo-X/zeolite systems where X is a dopant capable of modulating the stability. In this paper we provide a complete overview of the main Mo-X/zeolite systems used in MDA and critically draw connections among the different types of dopants (X) employed, as a function of the role they play in the reaction/deactivation pathway. We have also dedicated a section to emerging trends with non-Mo based catalysts. The goal of this review article is to establish a basis that will facilitate the identification of useful multifunctional catalytic systems, and recognize gaps in the knowledge of these systems that deserve more attention. Improving MDA systems to the point to which they can be commercially deployed requires a multifaceted approach that combines optimization of the designs of both the catalyst and the reactor configuration. We therefore also provide a brief overview of the most recent advances in process intensification strategies employed with different reactor configurations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mixed Tin-Titanium Oxides by Atomic Layer Deposition on Planar Substrates: Physical and Electronic Structure

Ternary atomic layer deposition of Sn-doped TiO x (Sn:TiO x ) and Ti-doped SnO x (Ti:SnO x ) was performed using tetrakisdimethylamidotitanium (IV) and tin(IV) with water at 150 °C on (1 0 0) Si and quartz substrates. The physical structure of the films was investigated using scanning electron, atomic force, and Kelvin probe force microscopies as well as spectroscopic ellipsometry, Raman spectroscopy, and X-ray diffraction. All as-deposited films are amorphous and possessed flat and conformal topographies with low surface roughness (<1 nm). Annealed Sn:TiO x and Ti:SnO x crystallize into the tetragonal anatase TiO 2 and cassiterite SnO 2 structures, respectively, without large variations to the film topography. The chemical composition of the as-deposited and annealed films was investigated through X-ray photoelectron spectroscopy. While dopants are homogenously mixed, the ternary ALD to form Sn:TiO x and Ti:SnO x surprisingly does not follow the rule of mixtures, despite similarities in both the growth rates of binary SnO x and TiO x and the precursors used. This finding is also supported by spectroscopic ellipsometry. Here, we postulate the deviation from the rule of mixtures is due to non-ideal surface chemistry of the binary ALD of SnO x . The optical bandgap of all films was quantified by the Tauc analysis and the valence band position was investigated by valence band X-ray photoelectron spectroscopy. Intra-bandgap states above the valence band maximum were observed for as-deposited Ti:SnO x and Sn:TiO x and ascribed to 5 s states from Sn 2+ ions. The presence of these intra-bandgap states induces enhanced visible absorption and bathochromic shifts to the apparent bandgap for all as-deposited films. Annealing the films removes the intra-bandgap states and increases the optical bandgap. Simplified band diagrams created using the data available demonstrated that the conduction and valence band positions did not vary between the positions of pure TiO 2 or SnO 2 with monotonic increases to the dopant incorporation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Doping transition-metal atoms in graphene for atomic-scale tailoring of electronic, magnetic, and quantum topological properties

Atomic-scale fabrication is an outstanding challenge and overarching goal for the nanoscience community. The practical implementation of moving and fixing atoms to a structure is non-trivial considering that one must spatially address the positioning of single atoms, provide a stabilizing scaffold to hold structures in place, and understand the details of their chemical bonding. Free-standing graphene offers a simplified platform for the development of atomic-scale fabrication and the focused electron beam in a scanning transmission electron microscope can be used to locally induce defects and sculpt the graphene. In this scenario, the graphene forms the stabilizing scaffold and the experimental question is whether a range of dopant atoms can be attached and incorporated into the lattice using a single technique and, from a theoretical perspective, we would like to know which dopants will create technologically interesting properties. Here in this paper, we demonstrate that the electron beam can be used to selectively and precisely insert a variety of transition metal atoms into graphene with highly localized control over the doping locations. We use first-principles density functional theory calculations with direct observation of the created structures to reveal the energetics of incorporating metal atoms into graphene and their magnetic, electronic, and quantum topological properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Revealing the interplay between “intelligent behavior” and surface reconstruction of non-precious metal doped SrTiO 3 catalysts during methane combustion

The impact of surface reconstruction of a model perovskite, SrTiO 3 (STO), on CH 4 activation for combustion and oxidative coupling was previously revealed that the reaction rate was proportional to the creation of Srterminated step sites. Doped perovskites (SrTi 1-x M x O 3 , M=metal dopant) present yet another form of reconstruction throughout the surface and the bulk, where the metal dopant can migrate in and out of the perovskite lattice, also known as "intelligent behavior". In this work, understanding the interplay between perovskite surface reconstruction (surface termination) and the "intelligent behavior" is tackled for the first time, and the catalytic consequences are probed with CH 4 combustion as a model reaction. A set of experimental techniques, including XRD, Raman spectroscopy, X-ray adsorption spectroscopy, kinetic measurements, as well as DFT calculations were used to understand the catalytic behavior of the reconstructed surfaces of Ni and Cu-doped STO for methane combustion. Here, we found that during methane oxidation, the diffusion of Ni and Cu into the lattice due to the "intelligent behavior" is accompanied by Sr enrichment on the surface of the perovskite. This Srenrichment process is reversible when Cu or Ni species exsolute as clusters/nanoparticles upon H 2 treatment. Such a surface reconstruction is found to greatly impact the catalytic activity of doped perovskites towards methane combustion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhancing durability and activity toward oxygen evolution reaction using single-site Re-doped NiFeO x catalysts at ampere-level

NiFeO x materials are known as among the most active catalysts toward oxygen evolution reaction (OER) for hydrogen generation in alkaline media. Nevertheless, the long-term durability of NiFeO x catalysts for OER is still too far to the industrial application. Herein, we prepared a NiFeReO x catalyst with single-site Re dopants and observed that the single-site Re dopants could significantly enhance the durability without compromising the activity. A cell voltage of 1.82 V without iR correction is noted at the current density of 3000 mA cm –2 in anion-exchange membrane water electrolyzer (AEMWE) with NiFeReO x catalyst, and a very small degradation is observed under 2000 and 1000 mA cm –2 , which remarkably outperforms the pristine NiFeO x . Additionally, the overpotential of 305 mV at 10 mA cm –2 is achieved with the NiFeReO x catalyst, which is lower than 50 mV compared with the pristine NiFeO x catalyst, together with a smaller Tafel slope of 54.3 mV dec -1 . The boosted OER durability and activity of the NiFeReO x catalyst could be attributed to the strong electron-withdrawing property of Re 7+ single atoms leading to the electronic structure optimization and stabilization of Ni/Fe active sites. Our insights propose a new path for designing NiFeO x catalysts with high durability and activity toward OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗