Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

The Dissolution of Cr and Fe at 850°C in FLiNaK and FLiBe

Understanding the solubility of common alloying elements, such as Cr and Fe, in fluoride salts, can provide valuable insights into the degradation process of alloys in these salts and assist in modeling the attack observed in static and flowing conditions. Previous isothermal dissolution experiments at 550°-750°C in FLiNaK showed little effect of time or temperature on the amount of dissolution, which was not expected. Therefore, the purpose of this milestone was to extend those observations to 850°C where Ni-based alloys have been developed with 100+X better creep strength than the historic Hastelloy N alloy developed for molten salt reactors more than 50 years ago. Exposures were conducted in the same commercial FLiNaK and FLiBe salts used in the lower temperature exposures.

36 MATERIALS SCIENCE↗

Development of a bench-scale dissolution concept for the direct extraction of nuclear fuel

Current used nuclear fuel reprocessing efforts utilize a hydrometallurgical approach in which the UNF is dissolved in hot nitric acid followed by solvent extraction into an organic solvent to harvest target nuclides. Previous studies have shown that the dissolution and loading process could be combined into a single organic dissolution/extraction step, producing loaded organic in a single step process. This single step process also includes the advantage of selectively targeting key nuclides in the dissolution while leaving undesirable constituents as part of the undissolved solids. This process is referred to hereafter as direct extraction. Ongoing research from multiple national labs has proven the effectiveness of this technique at research scale. Therefore, potential methods to implement direct extraction at both bench and industrial scale have been developed. The key features of potential dissolver system designs were identified via the team at Pacific Northwest National Laboratory and several designs based on industrial counterparts were assessed for feasibility. This report summarizes the advantages and disadvantages of multiple methods, concluding with a path forward to create multiple unique dissolver designs. The first design will be a single stage recirculating eductor mixer. The second design recommendation is a stator rotor static mixing flow loop design. Each dissolver could be utilized separately, simultaneously, or in series to answer questions surrounding reaction kinetics including residence time, provide a proof of concept for targeted extractions of specific nuclides, and inform needs for industrial scale implementation

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Recycling of PET by Dissolution-Purification-Recovery (DPR) Process Using Bioderived Solvent

Polyethylene terephthalate (PET) waste continues to accumulate at staggering rates, with the majority still routed to landfills due to limitations in current recycling methods. While mechanical recycling is widely implemented, it struggles to effectively remove colorants, additives, and harmful contaminants - resulting in discolored, degraded materials with limited reuse potential. In this presentation, we demonstrate a scalable dissolution-purification-recovery (DPR) process designed to selectively reclaim high-purity PET from post-consumer bottle flake. The method utilizes a food grade bio-based solvent for targeted PET dissolution, followed by activated carbon treatment for impurity removal and antisolvent-induced precipitation for polymer recovery. The resulting recycled PET exhibits complete decolorization, significantly reduced metal contamination, and minimal loss in molecular weight. These performance metrics indicate strong suitability for remanufacturing into new bottles, offering a circular alternative to traditional mechanical recycling pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DISSOLUTION OF SURROGATE U-Zr FUEL USING ALNIFLEX CONDITIONS

Non-aluminum clad spent nuclear fuel (NASNF) stored in L Basin at the Savannah River Site (SRS) is widely varied in fuel composition, design, packaging, and physical condition. The complexity of the NASNF inventory presents significant challenges, and technology development is necessary for successful disposition. One such fuel in the inventory is metallic uranium-zirconium (U-Zr) alloy fuel, the focus of this study. Electrolytic or nitric acid only dissolution of metallic U-Zr alloy can form insoluble zirconium oxide, which results in up to 52% loss of U to insoluble solids, and can be subject to potentially uncontrolled oxidation reactions [1, 2]. The AlNiflex process was determined to be a viable dissolution flowsheet for the U-Zr alloy fuel. Under a narrow set of solution concentrations, a combination of hydrofluoric acid (HF), nitric acid (HNO3), aluminum nitrate (Al(NO3)3), and hexavalent chromium can safely dissolve U-Zr intermetallic alloys, keep Zr soluble, and not significantly corrode stainless steel (SS) vessels [3, 4.

Gogolski, Jarrod M. [Savannah River National Labor↗

Prediction of micro-bubble dissolution characteristics in water and seawater

This paper is concerned with the prediction of micro-bubble dissolution characteristics in water and seawater when microbubbles are generated by a Sadatomi-type micro-bubble generator (2003) with a spherical body in a flowing liquid tube. In the experiments, in order to know the effects of the salinity on the characteristics, tap water and an artificial seawater with different salt concentrations of 1 and 3 wt% were used as the test liquids. Parameters measured were the Sauter mean diameter of bubbles, d{sub BS}, the void fraction, {alpha}, the rising velocity of bubbles, u{sub G}, the interfacial area concentration, a, the volumetric mass transfer coefficient, K{sub L}a, and the liquid-side mass transfer coefficient, K{sub L}. In the analysis, for predicting {alpha}, K{sub L}a and K{sub L}, some correlations in the literatures were tested against the present data. Furthermore, in order to improve the predictability, new correlations were developed based on the present data. The prediction of K{sub L}a with the new correlation agreed well with Nishino et al.'s [T. Nishino, K. Terasaka, M. Ishida, Application for several micro-bubble generators for gas absorber, in: Proceedings of the Annual Meeting of the Japanese Society for Multiphase Flow, 2006, pp. 276-277 (in Japanese)] and Li and Tsuge's [P. Li, H. Tsuge, Water treatment by induced air flotation using microbubbles, Journal of Chemical Engineering of Japan 39 (2006) 896-903; P. Li, H. Tsuge, Ozone transfer in a new gas-induced contactor with microbubbles, Journal of Chemical Engineering of Japan 39 (2006) 1213-1220] data for different aeration systems using several different micro-bubble generators. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Speciation of Transition Metal Dissolution in Electrolyte from Common Cathode Materials

Significant capacity loss has been observed across extended cycling of lithium-ion batteries cycled to high potential. One of the sources of capacity fade is transition metal dissolution from the cathode active material, ion migration through the electrolyte, and deposition on the solid-electrolyte interphase on the anode. While much research has been conducted on the oxidation state of the transition metal in the cathode active material or deposited on the anode, there have been limited investigations of the oxidation state of the transition metal ions dissolved in the electrolyte. Here, in this work, X-ray absorption spectroscopy has been performed on electrolytes extracted from cells built with four different cathode active materials (LiMn 2 O 4 (LMO), LiNi 0.5 Mn 1.5 O 4 (LNMO), LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811), and (x Li 2 MnO 3 *(1-x) LiNi a Mn b Co c O 2 , with a+b+c=1) (LMRNMC)) that were cycled at either high or standard potentials to determine the oxidation state of Mn and Ni in solution. Inductively coupled plasma-mass spectrometry has been performed on the anodes from these cells to determine the concentration of deposited transition metal ions. While transition metal ions were found dissolved in all electrolytes, the oxidation state(s) of Mn and Ni were determined to be dependent on the cathode material and independent of cycling potential.

25 ENERGY STORAGE↗

Integrated Polymer Dissolution and Solution Blow Spinning Coupled with Solvent Recovery for Expanded Polystyrene Recycling

With increasing buoyant plastic wastes entering into oceans and food chains, the disposal and recycling of waste expanded polystyrene (WPS) has become an imminent environmental problem. In this work, a recycling scheme for waste WPS is proposed that combines the polymer dissolution recycling approach with the solution blow spinning (SBS) technique that facilitates the high-volume bulk WPS transportation and the value-addition of WPS to nanofibers. Solvent selection is critical for an economical and environmentally favorable implementation of this recycling scheme at large scale. Here, the effect of three solvents with distinct volatility, viz. ethyl acetate, toluene, and N, N- dimethylformamide (DMF) have been studied on the fiber formation and the ease of the solvent recovery, in order to ascertain the practicability of using these solvents for the recycling process. The fiber formation is experimentally demonstrated for the WPS-solvent systems using the SBS process. It is found that the fiber morphology varies for the different WPS-solvent systems. A solvent recovery scheme to recover the solvent from the air-solvent mixture (leaving SBS) is evaluated using ASPEN Plus simulation. The % solvent recovery is determined as a function of the required energy input for different process parameters including compressor pressure and air to polymer solution feed ratio. The simulation studies show that a lower feed air to polymer solution ratio and higher compressor pressure are required to obtain > 70% solvent recovery for high volatility solvents (ethyl acetate and toluene) with lower energy input and optimal operating condenser temperature (~ 0 °C). Conversely, significant solvent losses occur in the SBS process with a lower volatility solvent (DMF), leading to a lower solvent recovery for the whole process. The % DMF recovery can be improved upon by using higher feed air to polymer solution ratio although at a higher energy penalty.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gamma-ray spectrometry analysis methods for radioisotope dissolution and mixing for nuclear forensics applications

We report the production of surrogate nuclear explosive debris involves the dissolution of irradiated fissile material, elemental isolation, and recombination based on required fission product ratios. Gamma-ray spectrometry is used following each step to assess the radioactive fission product inventory. A high-purity germanium detector is used to measure each sample, and the detector efficiencies are determined prior to sample measurements. Through radiochemical techniques, elements are isolated and recombined into samples with specific fission product ratios. As a result, a matrix-based approach can account for imperfect chemical separations to calculate the proper mixture volumes to obtain intended volatile-to-refractory fission product ratios, or R-values.

07 ISOTOPE AND RADIATION SOURCES↗

Dissolution Behavior of Mg from Magnesia-Chromite Refractory into Al-killed Molten Steel

Magnesia-chromite refractory materials are widely employed in steel production, and are considered a potential MgO source for the generation of MgO·Al{sub 2}O{sub 3} spinel inclusions in steel melts. In this study, a square magnesia-chromite refractory rod was immersed into molten steel of various compositions held in an Al{sub 2}O{sub 3} crucibles. As the immersion time was extended, Mg and Cr gradually dissolved from the magnesia-chromite refractory, and the Mg and Cr contents of the steel melts increased. However, it was found that the inclusions in the steel melts remained as almost pure Al{sub 2}O{sub 3} because the Mg content of the steel melts was low, approximately 1 ppm. On the surface of the magnesia-chromite refractory, an MgO·Al{sub 2}O{sub 3} spinel layer with a variable composition was formed, and the thickness of the MgO·Al{sub 2}O{sub 3} spinel layer increased with the immersion time and the Al content of the steel melts. At the rod interface, the formed layer consisted of MgO-saturated MgO·Al{sub 2}O{sub 3} spinel. The MgO content decreased along the thickness direction of the layer, and at the steel melts interface, the formed layer consisted of Al{sub 2}O{sub 3}-saturated MgO·Al{sub 2}O{sub 3} spinel. Therefore, the low content of Mg in steel melts and the unchanged inclusions were because of the equilibrium between Al{sub 2}O{sub 3}-saturated MgO·Al{sub 2}O{sub 3} layer and Al{sub 2}O{sub 3}. In addition, the effects of the Al and Cr contents of the steel melts on the dissolution of Mg from the magnesia-chromite refractory are insignificant.

36 MATERIALS SCIENCE↗

Characterization by solid-state NMR and selective dissolution techniques of anhydrous and hydrated CEM V cement pastes

The long term behaviour of cement based materials is strongly dependent on the paste microstructure and also on the internal chemistry. A CEM V blended cement containing pulverised fly ash (PFA) and blastfurnace slag (BFS) has been studied in order to understand hydration processes which influence the paste microstructure. Solid-state NMR spectroscopy with complementary X-ray diffraction analysis and selective dissolution techniques have been used for the characterization of the various phases (C{sub 3}S, C{sub 2}S, C{sub 3}A and C{sub 4}AF) of the clinker and additives and then for estimation of the degree of hydration of these same phases. Their quantification after simulation of experimental {sup 29}Si and {sup 27}Al MAS NMR spectra has allowed us to follow the hydration of recent (28 days) and old (10 years) samples that constitutes a basis of experimental data for the prediction of hydration model.

36 MATERIALS SCIENCE↗

Effects of polycarboxylate ether (PCE)-based superplasticizer on the dissolution and subsequent hydration of calcium oxide (CaO)

Calcium oxide (CaO) is an important construction material, used as expansive agent, alkaline activator, and repairing material for historical structures. In this study, the dissolution and subsequent hydration of CaO, with or without the polycarboxylate ether (PCE)-based superplasticizer, were investigated to elucidate the complex crystallization process of calcium hydroxide (Ca(OH){sub 2}). On contact with pure water, CaO particles began to hydrate within a few minutes, while releasing a significant amount of heat. Adding superplasticizer slowed such rapid heat evolution by forming a dormant period and significantly affected the crystallinity of the hydration product. The dormant period was controllable by the amount of added superplasticizer. Moreover, as a result of early nucleation of Ca(OH){sub 2}, the formation of 10–100-nm spherical nanoparticles was observed via an in-situ transmission electron microscope, which completely differed from the final crystal shape of the hydration product.

36 MATERIALS SCIENCE↗

Rates of mineral dissolution under CO 2 storage conditions

Evaluating the potential of a sedimentary basin reservoir to securely store CO 2 benefits from a comprehensive understanding of the geochemical reactions that take place once CO 2 is injected into a formation. In particular, models that predict the transport and reaction of CO 2 within a reservoir require a definition of the types of reactions affected by enhanced levels of CO 2 and how the kinetics of these reactions will affect a heterogeneous mineralogy and formation waters within a reservoir over time. In this review we evaluate rate models used to describe mineral dissolution kinetics and compare the range in values reported for the kinetic parameters used to describe the reactivity of various minerals relevant to mainly siliciclastic reservoirs. Parameters that have a significant impact on model results include the reactive surface area of a mineral, the apparent activation energies used to extrapolate reaction rates to the temperatures of potential storage reservoirs (c. 50–125 °C) and the in-situ pH of formation waters with elevated concentrations of dissolved CO 2 . The variation in reported values for these parameters can lead to predicted rates that span many orders of magnitude for a given mineral. Despite these uncertainties recent success with geochemical models has been made by applying a Monte Carlo approach to optimise the kinetic parameters for minerals where robust thermodynamic and kinetic data do not exist.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction between dissolution and precipitation during olivine carbonation: Implications for CO 2 mineralization

Large-scale carbonation of olivine is considered a promising approach for in situ mineral carbonation, offering a permanent and stable method for CO 2 storage. A critical aspect of this process is understanding how dissolution and precipitation interact, as this could drive fracturing and enhance further reactions. In this study, we conducted carbonation experiments on olivine using CO 2 -saturated aqueous solutions of NaHCO 3 and NaCl. Two experimental setups were used: one representing an open geochemical system and the other a closed system, corresponding to reaction-limited and flow-limited scenarios, respectively. Further, post-reaction textural analysis using scanning electron microscopy (SEM) revealed surface coatings of reaction products in the closed system, while etch pits and etch channels were prevalent in the open system. Although no direct evidence of reaction-driven fracturing was observed, etch pits and etch channels may serve as initiation points for subcritical crack formation and growth, potentially maintaining permeability and exposing new unreacted surfaces. Using linear elastic fracture mechanics (LEFM) model, we estimate that microcracks could propagate under a pressure of 0.1 GPa if reaction products accumulate within the etch pits. Our findings offer new insights into the mechanisms governing olivine carbonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Localized corrosion: Passive film breakdown vs. Pit growth stability, Part VI: Pit dissolution kinetics of different alloys and a model for pitting and repassivation potentials

Here, the pitting resistance of SS316L, SS304, SS430, and pure Fe was studied in chloride-containing solution. Among these alloys, SS316L exhibits the highest pit initiation rate, but also the highest pitting potential. To explain this phenomenon, the maximum pit dissolution current density (i diss,max ) of the alloys in saturated pit solution was measured using one-dimensional artificial pit electrodes. A lower i diss,max was found to correlate with higher pitting and repassivation potentials. Based on a recently proposed pitting framework, a conceptual model for pitting and repassivation potentials was established, based on which the effect of i diss,max on pitting resistance was discussed.

one-dimensional artificial pit electrode↗

Conversion kinetics during melting of simulated nuclear waste glass feeds measured by dissolution of silica

In this work, we experimentally investigated the batch-to-glass conversion kinetics of two low-activity and two high-level nuclear waste melter feeds that represent widely different behavior during melting; tests comprised thermogravimetric analysis, the feed expansion test, evolved gas analysis, and x-ray diffraction. Our study indicates that the conversion processes, which include gas-evolving reactions, dissolution of crystalline phases, and primary foam expansion and collapse, are interconnected and influenced by the feed’s thermal history. The fraction of dissolved silica was adopted as a measure of the extent of conversion inside the cold cap—the floating layer of feed material on the top surface of the melt in an electric melter. The interface between the cold cap and the free-flowing melt below was associated with a constant fraction of dissolved silica. The estimated viscosity of glass-forming melt at this interface lies within a narrow range for the feeds studied.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Austenite formation and cementite dissolution during intercritical annealing of a medium-manganese steel from a martensitic condition

In the present study, in situ high-energy X-ray diffraction (HEXRD), dilatometry, and metallography were conducted for the purpose of understanding microstructure evolution during intercritical annealing of a Fe-0.19C-4.39Mn steel from a martensitic initial condition. Three different simulations for austenite growth and solute partitioning during isothermal holding were conducted using the DICTRA™ module of Thermo-Calc®. The microstructures after intercritical annealing exhibit film-like retained austenite; however, in situ HEXRD indicates that retained austenite in the initial martensitic microstructure had decomposed upon heating to the isothermal holding temperature, suggesting that film-like austenite may be generated during intercritical annealing via nucleation and growth of new austenite and without necessarily preserving initial retained austenite films in the martensitic microstructure. Metallography and in situ HEXRD also indicate that cementite had formed upon heating but did not readily dissolve during an 1800 s isothermal hold although considerable growth of austenite had occurred during the isothermal hold, suggesting that austenite nucleation and initial growth during intercritical annealing does not solely occur due to carbon partitioning. A simulation incorporating cementite suggests that the increase in austenite fraction during intercritical annealing initially occurs in association with Mn partitioning followed by austenite growth induced by gradual cementite dissolution.

36 MATERIALS SCIENCE↗

Study of the solubility and stability of polystyrene wastes in a dissolution recycling process

Dissolution with suitable solvents is one of the cheapest and more efficient processes for polystyrene waste management. In this work the solubility of polystyrene foams in several solvents benzene, toluene, xylene, tetrahydrofuran, chloroform, 1,3-butanediol, 2-butanol, linalool, geraniol, d-limonene, p-cymene, terpinene, phellandrene, terpineol, menthol, eucalyptol, cinnamaldheyde, nitrobenzene, N,N-dimethylformamide and water has been determined. Experimental results have shown that to develop a 'green process' the constituents of essential oils, d-limonene, p-cymene, terpinene, phellandrene, are the most appropriate solvents. The action of these solvent does not produce any degradation of polymer chains. The solubility of the polymer in the mentioned solvents at different temperatures has been investigated. The solvent can be easily recycled by distillation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental study of dissolution of minerals and CO{sub 2} sequestration in steel slag

Highlights: • CO{sub 2} sequestration potential of steel slag under aqueous medium without the usage of any additive chemicals. • Formation of residue and product layers on the surface of slag particles. • Stabilization of steel slags by carbonation process. •Determining the impact of carbonation of slag on environment. - Abstract: This study strives to achieve a substantial amount of steel slag carbonation without using any harmful chemicals. For this purpose, experiments were performed in an aqueous medium, in a semi-batch reactor, to investigate the effect of varying reaction conditions during the steel slag CO{sub 2} sequestration process. Further, studying the effect of dissolution on carbonation reactions and the mineralogical changes that subsequently occur within the slag helps provide insight into the parameters that ultimately have an impact on the carbonation rate as well the magnitude of the impact.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗