SEARCH · Engineering Papers

Results for “determinant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Interplanetary orbit determination

A general description of the Viking interplanetary orbit determination activity extending from launch to Mars encounter is given. The emphasis is on the technical fundamentals of the problem, basic strategies and data types used, quantitative results, and specific conclusions derived from the inflight experience. Special attention is given to the use of the spacecraft-based optical measurements and their first application as a principal navigational data type for an interplanetary mission. The optical-based orbit determination, in fact, was the primary contributor to the exceptional interplanetary navigation accuracy experienced by both Viking missions. The Viking application of optical orbit determination relied in large part on the technology developed and demonstrated by the Mariner 9 Optical Navigation Demonstration.

Rourke, K. H.↗

NASA NTRS1979

Satellite orbit determination

The determination of the Mars-centered ephemerides of the Viking Orbiters and positions of the Landers from two way Doppler and range data is described. An overview of mission satellite orbit determination functions and methods is given. Topics covered include: postmaneuver orbit convergence, local orbit knowledge accuracies, the effects of interplanetary media, use of constrained solutions, and solving through trim burns. Procedure and results relevant to the determination of the planet gravity field are included. Results relative to sensing Mars' gravity field during the extended mission are presented along with a discussion of the Phobos Flyby Experiment conducted during February 1977.

Hildebrand, C. E.↗

NASA NTRS1978

Determination of the Solar Energy Microclimate of the United States Using Satellite Data

The determination of total solar energy reaching the ground over the United States using measurements from meteorological satellites as the basic data set is examined. The methods of satellite data processing are described. Uncertainty analysis and comparison of results with well calibrated surface pyranometers are used to estimate the probable error in the satellite-based determination of ground insolation. It is 10 to 15 percent for daily information, and about 5 percent for monthly values. However, the natural space and time variability of insolation is much greater than the uncertainty in the method. The most important aspect of the satellite-based technique is the ability to determine the solar energy reaching the ground over small areas where no other measurements are available. Thus, it complements the widely spaced solar radiation measurement network of ground stations.

Vonderharr, T. H.↗

NASA NTRS1980

Coordinated aircraft and ship surveys for determining impact of river inputs on great lakes waters. Remote sensing results

The remote sensing results of aircraft and ship surveys for determining the impact of river effluents on Great Lakes waters are presented. Aircraft multi-spectral scanner data were acquired throughout the spring and early summer of 1976 at five locations: the West Basin of Lake Erie, Genesee River - Lake Ontario, Menomonee River - Lake Michigan, Grand River - Lake Michigan, and Nemadji River - Lake Superior. Multispectral scanner data and ship surface sample data are correlated resulting in 40 contour plots showing large-scale distributions of parameters such as total suspended solids, turbidity, Secchi depth, nutrients, salts, and dissolved oxygen. The imagery and data analysis are used to determine the transport and dispersion of materials from the river discharges, especially during spring runoff events, and to evaluate the relative effects of river input, resuspension, and shore erosion. Twenty-five LANDSAT satellite images of the study sites are also included in the analysis. Examples of the use of remote sensing data in quantitatively estimating total particulate loading in determining water types, in assessing transport across international boundaries, and in supporting numerical current modeling are included. The importance of coordination of aircraft and ship lake surveys is discussed, including the use of telefacsimile for the transmission of imagery.

Raquet, C. A.↗

NASA NTRS1980

A preliminary assessment of the accuracy of selected meteorological parameters determined from Nimbus 6 satellite profile data

Published rms errors in rawinsonde data and discrepancies between satellite and rawinsonde profile data for temperature, dewpoint temperature, mixing ratio, and wind speed. Satellite rms errors were found to be 2 to 3 times as large as those for rawinsonde data. Gradients of the preceding parameters were computed for both rawinsonde and satellite data and compared with means and near extreme values computed from the AVE 2 and AVE 4 experiments. In all cases, it was found that satellite data can be used to determine with relatively good accuracy the near extreme gradients but not those whose value does not exceed the average. Synoptic charts were prepared to show that patterns of temperature could be determined with relatively good accuracy, while those of dew point were not as good as those for temperature. Winds represented by cloud motion vectors (satellite winds) were compared with rawinsonde winds, and it was found that large gaps exist in satellite values for a given pressure level and that errors in the satellite determined concluded that satellite profile data are very useful in synoptic analysis, particularly in data sparse regions as well as regions where near extreme gradients exist in the measured parameters.

Scoggins, J. R.↗

NASA NTRS1980

A spectral method for determining the percentage of green herbage material in clipped samples

A laboratory radiometric method for the rapid determination of green and brown vegetation percentages in clipped grass samples has been developed and tested. The method uses red and photographic infrared radiance or reflectance differences between green and brown vegetation. Mixtures of green and brown material were found to have radiances or reflectances proportional to the percentage of green material present. This method may permit the use of rapid green/brown radiometric determinations to replace the tedious hand sorting now generally used. It may also have application in remote sensing of vegetation ground-truth work where the determination of dry green biomass in clipped samples is necessary.

Tucker, C. J.↗

NASA NTRS1980

Experimental determination of the admittances of aluminized propellants by the impedance tube method

The adaptation of the impedance tube concept for the determination of the pressure coupled admittances and response functions of burning solid propellants is discussed. The results obtained in experiments with UTP-3001 and UTP-19360 aluminized propellants are presented. It is shown that the admittance Y remains constant during the quasi-steady burn period of a test, indicating constant driving of the gas phase disturbance by the burning solid propellant. The measured real part of the admittance is positive, indicating that the burning aluminized propellant is driving the gas phase oscillations. In addition, the measured high gas phase damping, provided by the aluminum oxide particles in the gas phase, suggests that the latter can significantly increase the damping in unstable solid rockets over the investigated frequency range. Finally, it is shown that the wave structure obtained by numerically solving the impedance tube wave equations which utilize the determined propellant admittance as an initial condition and the determined value of G to describe the gas phase losses is in excellent agreement with the measured wave structure.

Baum, J. D.↗

NASA NTRS1981

A method for determining landing runway length for a STOL aircraft

Based on data obtained from flight tests of the augmentor wing jet STOL research aircraft, a method is proposed for determining the length of the landing runway for powered-lift STOL aircraft. The suggested method determines runway landing length by summing three segments: the touchdown-dispersion distance, the transition distance from touchdown to application of brakes, and the stopping distance after brakes are applied. It is shown how the landing field length can be reduced either through improved autoland system design or by providing the pilot with appropriate information to allow him to identify a "low probability" long or short landing and to execute a go-around. The proposed method appears to determine a safe runway landing length for the STOL application and offers the potential for reducing runway length if great emphasis is placed on a short-runway capability. FAR Parts 25 and 121 appear conservative and suitable for the situation where no great emphasis is placed on reducing the runway length requirement.

Watson, D. M.↗

NASA NTRS1980

Determination of spacecraft attitude using synthetic aperture radar data

A method has been developed for precise sensor platform attitude determination which exploits the availability of synthetic aperture radar (SAR) sensors on future planned NASA earth orbiting spacecraft. Using the ephemeris along with data on planet shape and rotation, the relative motion between sensor and target area and therefore the Doppler frequency shift in the returned echo data is determined. Equations have been developed that relate the Doppler shift to the antenna attitude. The method is tested by comparing attitude predictions from SEASAT SAR digital echo data with available conventionally determined SEASAT attitude information.

Wu, C.↗

NASA NTRS1981

Determination of lifetimes and recombination currents in p-n junction solar cells, diodes, and transistors

New methods are presented and illustrated that enable the accurate determination of the diffusion length of minority carriers in the narrow regions of a solar cell or a diode. Other methods now available are inaccurate for the desired case in which the width of the region is less than the diffusion length. Once the diffusion length is determined by the new methods, this result can be combined with measured dark I-V characteristics and with small-signal admittance characteristics to enable determination of the recombination currents in each quasi-neutral region of the cell - for example, in the emitter, low-doped base, and high-doped base regions of the BSF (back-surface-field) cell. This approach leads to values for the effective surface recombination velocity of the high-low junction forming the back-surface field of BSF cells or the high-low emitter junction of HLE cells. These methods are also applicable for measuring the minority-carrier lifetime in thin epitaxial layers grown on substrates with opposite conductivity type.

Neugroschel, A.↗

NASA NTRS1981

Present status and future trends in near-Earth satellite orbit determination

The major components of an orbit determination system and the evolution of the elements making up each component are reviewed. Typical accuracies presently achievable in the orbit determination process, the factors limiting the accuracies, and improvements in the dynamic models used in the process are summarized. Models are developed for orbit determination programs which include: (1) time varying area for solar radiation pressure; (2) a time varying model for albedo radiation pressure; (3) Earth tides which account for the distortions in the Earth's body due to Sun and Moon attraction; and (4) ocean tides which affect satellite altimeter data.

Fuchs, A. J.↗

NASA NTRS1982

A determination of the current density in electron beams

Current gathering rotating probe techniques were used to examine the envelope shape and power density profile of electron beams used in electron beam welding devices. The electron power density contours which determine the shape of the weld vapor cavity, penetration, and local heat distribution were considered. A mathematical analysis consistent with a rotating probe technique necessary to determine the current density distribution (assumed symmetrically radial) in a cross-section of the beam is provided. An explanation of the experimental technique for obtaining data, a BASIC language computer program to determine the current density from the data, and a study indicating the level of confidence to be associated with results obtained are also provided. An example of the application of the analysis to some experimental electron beam data is included.

Beil, R. J.↗

NASA NTRS1982

A comprehensive model to determine the effects of temperature and species fluctuations on reaction rates in turbulent reacting flows

The use of probability theory to determine the effects of turbulent fluctuations on reaction rates in turbulent combustion systems is briefly reviewed. Results are presented for the effect of species fluctuations in particular. It is found that turbulent fluctuations of species act to reduce the reaction rates, in contrast with the temperature fluctuations previously determined to increase Arrhenius reaction rate constants. For the temperature fluctuations, a criterion is set forth for determining if, in a given region of a turbulent flow field, the temperature can be expected to exhibit ramp like fluctuations. Using the above results, along with results previously obtained, a model is described for testing the effects of turbulent fluctuations of temperature and species on reaction rates in computer programs dealing with turbulent reacting flows. An alternative model which employs three variable probability density functions (temperature and two species) and is currently being formulated is discussed as well.

Chinitz, W.↗

NASA NTRS1982

Voyager 1 and Voyager 2 Saturn encounter orbit determination

This paper contains quantitative results and conclusions from the Saturn approach orbit determination for Voyagers 1 and 2. The major topics covered include an overview of the navigation-related requirements and a review of the salient orbit determination results obtained. Special attention is paid to the use of combined spacecraft-based optical observations and earth-based radiometric observations to achieve accurate orbit determination during the Saturn encounter approach phase.

Campbell, J. K.↗

NASA NTRS1981

On ionization equilibrium in solar flares as determined from X-ray emissionlines of Ca XVIII and Ca XIX

A diagnostic capable of determining the state of ionization equilibrium in flare plasmas is important for the determination of the physical conditions in flares. An experiment on the Air Force satellite P78-1 has provided high-resolution X-ray spectra which make it possible to determine the state of the ionization equilibrium in coronal flare plasmas. The considered investigation has the objective to show that the interpretation of the calcium results is complicated by several possible blends to line q, and to point out a variation in the observed ratios which seems difficult to account for. Possible explanations for the observations are discussed, taking into account the possibility that the ionization equilibrium calculations have to be improved. Another possible explanation is related to a suggestion made by Urnov (1981) and Karev et al. (1980) concerning the effects produced by the presence of high-energy nonthermal electrons.

Doscher, G. A.↗

NASA NTRS1981

Determination of surface stress by Seasat-SASS - A case study with JASIN data

The values of sea surface stress determined with the dissipation method and those determined with a surface-layer model from observations on F.S. Meteor during the Joint Air-Sea Interaction (JASIN) Experiment are compared with the backscatter coefficients measured by the scatterometer SASS on the satellite Seasat. This study demonstrates that SASS can be used to determine surface stress directly as well as wind speed. The quality of the surface observations used in the calibration of the retrieval algorithms, however, is important. This sample of measurements disagrees with the predictions by the existing wind retrieval algorithm under non-neutral conditions and the discrepancies depend on atmospheric stability.

Liu, W. T.↗

NASA NTRS1982

On determination of fibre fraction in continuous fibre composite materials

It is pointed out that the fiber volume fraction is probably the most important parameter influencing the properties of fibrous composite materials. The present investigation is concerned with questions regarding the accurate determination of this parameter. It is found that an estimate of the fiber volume fraction based on determinations from several coupons taken from different regions of a laminate is not accurate. At present fiber volume fractions are not directly measured but rather are calculated from the fiber weight fraction and densities of the composite and fiber. Image analysis techniques can and should be applied to determine fiber volume fraction. However, several factors have to be considered in this connection. It is necessary to make many measurements of the local fiber area fractions, and the preparation of representative planar cross sections parallel to the fiber axis may be difficult.

Whittenberger, J. D.↗

NASA NTRS1982

Flight-determined correction terms for angle of attack and sideslip

The effects of local flow, upwash, and sidewash on angle of attack and sideslip (measured with boom-mounted vanes) were determined for subsonic, transonic, and supersonic flight using a maximum likelihood estimator. The correction terms accounting for these effects were determined using a series of maneuvers flown at a large number of flight conditions in both augmented and unaugmented control modes. The correction terms provide improved angle-of-attack and sideslip values for use in the estimation of stability and control derivatives. In addition to detailing the procedure used to determine these correction terms, this paper discusses various effects, such as those related to Mach number, on the correction terms. The use of maneuvers flown in augmented and unaugmented control modes is also discussed.

Shafer, M. F.↗