Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corrections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Orientation matters: Measuring the correct surface of polyamide membranes with quartz crystal microbalance

The surface of polyamide reverse osmosis (RO) membranes which regulates interface-dominated phenomena, such as partitioning and fouling, is the one facing the feed during operation. However, the opposite surface of the polyamide selective layer, the one facing the permeate and in contact with the polysulfone porous support, is commonly analyzed in quartz crystal microbalance (QCM) measurements due to limitations of state-of-the-art transfer methodologies. Such measurements on the back surface cannot be generalized because the polyamide layer is chemically and morphologically asymmetric. Herein, we introduce a simple method to coat QCM sensors with polyamide active layers in the correct orientation (i.e., exposing their front surface) and show that interface-dominated phenomena differ significantly between orientations. We start by describing a transfer protocol to coat any surface with a polyamide layer on its front surface orientation. We then systematically analyze the chemical and morphological differences between the two surfaces of the polyamide layer of a commercial RO membrane. Finally, we demonstrate that interface-dominated phenomena depend on the orientation by showing that NaCl partitioning at pH 6 was 1.3 to 2.3-fold higher on the front surface and that organic fouling with humic acid occurred at a lower rate on this surface. The new method presented herein enables measurements on the front surface of polyamide RO membranes, which should be the standard in any future QCM studies.

Fouling behavior↗
DOE OSTI2021

Remediating neutron damage in large area planar Ge-DSSD with amorphous germanium contacts through annealing and pulse-height correction

Large area, position sensitive planar germanium detectors offer new opportunities in -ray spectroscopy. For in-beam studies remediating neutron damage is important. This work studied a mechanically cooled circular planar 9 × 1 cm wafer with orthogonal 16 × 16 amorphous germanium strip electrodes. Before neutron irradiation the wafer was heated in-cryostat to above 373 K for more than 24 h in order to test the robustness of the contacts and the mechanical cooler. No deterioration in performance was observed. The detector was then exposed to controlled doses of 2.2 MeV neutrons, produced from the 7 Li(p,n) 7 Be reaction until substantial damage was observed. Averaged over the surface of the wafer, a flux of 1.9(1) x 10 9 n/cm 2 was delivered. The detector then survived thermal cycling and 350 K (~77°C) annealing for 70 h which substantially reduced hole trapping. pulse-height correction is investigated to further mitigate the neutron damage. Higher temperature annealing at 365 K was not successful.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Correction of crosstalk effect in the Low Energy RHIC electron Cooler Booster Cavity

we report that the Low Energy Relativistic Heavy Ion Collider (RHIC) electron Cooler (LEReC) is designed to deliver a 1.6 MeV to 2.6 MeV electron beam, with rms dp/p less than 5e-4. The superconducting radiofrequency (SRF) Booster Cavity is the major accelerating component in LEReC. It is a 0.4 cell cavity operating at 2 K, providing a maximum energy gain of 2.2 MeV. It is modified from an experimental Energy Recovery Linac (ERL) photocathode gun, and thus has fundamental power couplers (FPCs), pickup (PU) couplers (field probes) and HOM coupler close to each other on the same side of the cavity. Direct capacitive coupling between the FPC and PU, called the crosstalk effect, combined with microphonic detuning, can induce closed loop voltage fluctuations that exceed the total energy spread requirement of LEReC. The crosstalk effect in this cavity is modelled, simulated, and measured, and a correction method is proposed and demonstrated to suppress the voltage fluctuation so that energy spread requirement can be met.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Correcting beam space charge effects in Active-Target Time Projection Chamber

By providing a large gaseous volume for nuclear interactions while simultaneously recording the tracks of resulting reaction products, an active target serves as both a thick target and a detector. Once a reaction occurs, the emitted charged fragments strip electrons from the target gas along their path as they transverse the detector. Collection of these stripped electrons allow for detection of the product tracks. As beam intensity increases, the resulting ionization in the active target can significantly distort this collection of electrons. If left uncorrected, the resulting measurements could be wrong. In this paper, we investigate the impact of the space charge produced by heavy radioactive beams within the Active Target - Time Projection Chamber at Michigan State University. The beams are injected parallel to the electric field of the time projection chamber which is operated without a magnetic field for this experiment. Furthermore, we analyze the rate dependence of the space charge effects and demonstrate that they can be modeled and effectively corrected.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Electroweak nuclear radii constrain the isospin breaking correction to V ud

We lay out a novel formalism to connect the isospin-symmetry breaking correction to the rates of superallowed nuclear beta decays, δ C , to the isospin-breaking sensitive combinations of electroweak nuclear radii that can be accessed experimentally. We individuate transitions in the superallowed decay chart where a measurement of the neutron skin of a stable daughter even at a moderate precision could already help discriminating between models used to compute δ C . We review the existing experimental situation and make connection to the existing and future experimental programs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Model correction and updating of a stochastic degradation model for failure prognostics of miter gates

Understanding the degradation of the quoin block is vital for failure prognostics in miter gates. Due to the complicated degradation mechanism, degradation models based on simplifications and assumptions cannot accurately describe the damage evolution. It is observed that small errors in a simplified degradation model can lead to a large discrepancy in the remaining useful life estimation attributed to error accumulation over time. Aiming to address this issue in failure prognostics, this paper presents a dynamic model correction framework for a simplified degradation model using strain measurements. In the proposed framework, a polynomial chaos expansion (PCE) model is employed to compensate the missing physics in a simplified stochastic degradation model. Here, a maximum likelihood estimation method is developed to estimate the uncertain parameters of the simplified physics-based degradation model along with the unknown PCE model parameters using strain measurements as the observables. The updated damage degradation model is then applied to failure prognostics of a miter gate. Results of a case study show that the proposed approach can effectively improve the accuracy of failure prognostics in miter gates.

42 ENGINEERING↗
DOE OSTI2023

X-ray Spectrometry in the Era of Aberration-Corrected Electron Optical Beam Lines

Abstract Aberration correction in the analytical transmission electron microscope is most closely associated with improvements in high-resolution imaging. In this paper, the combination of that technology with new system designs, which optimize both electron optics and x-ray detection, is shown to provide more than a tenfold increase in performance over the last 25 years.

Zaluzec, Nestor J. (ORCID:0000000248573487)↗
DOE OSTI2020

Correction to Norm-conserving pseudopotentials and basis sets to explore Lanthanide chemistry in complex environments

Correction was made to the funding and acknowledgment: Funding V.-A.G. was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division. R.R. and M.-T.N. were supported by the Laboratory Directed Research and Development Program at Pacific Northwest National Laboratory (PNNL) CheMSR Agile Investment. PNNL is operated by DE-AC05-76RLO01830. J.-B.L. and J.L. were supported by the National Natural Science Foundation of China (Nos. 21433005, 91645203, and 21590792). D.C.C. was supported by Research and Innovation at the University of Nevada, Reno. ACKNOWLEDGMENTS The research was performed using resources available through Research Computing at Pacific Northwest National Laboratory (PNNL), Tsinghua National Laboratory for Information Science and Technology and the Computational Chemistry Laboratory under Tsinghua Xuetang Talents Program, and University of Nevada, Reno High Performance Computing. J.- B.L. and J.L. acknowledge discussions with Dr. Yang-Gang Wang (Southern University of Science and Technology).

Lu, Jun-Bo↗
DOE OSTI2020

Correction to Reconciling Work Functions and Adsorption Enthalpies for Implicit Solvent Models: A Pt (111)/Water Interface Case Study

This errata is to correct the acknowledgment in the original published article. G.B. (partial support), V.-A.G., M.-T.N., and R.R. were supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division. Computer resources were provided by Research Computing at Pacific Northwest National Laboratory and the National Energy Research Scientific Computing Center (NERSC), a U.S. Department of Energy Office of Science User Facility operated under Contract No. DE-AC02-05CH11231. PNNL is operated by Battelle for the U.S. Department of Energy under Contract DE-AC05-76RL01830. G.B. acknowledges the EPSRC for partial support in PhD funding. The authors acknowledge the use of the IRIDIS High Performance Computing Facility (IRIDIS 5) and associated support services at the University of Southampton in the completion of this work. We are grateful to the UK Materials and Molecular Modeling Hub (Thomas HPC) for computational resources, which is partially funded by EPSRC (EP/P020194/1).

continuum solvation, metal/water interfaces, ab in↗
DOE OSTI2026

Linear-Scaling Asymmetric Triples Correction through the Solution of the DLPNO–CCSD Lambda Equations: DLPNO–CCSD(T) Λ

In this research, we derive equations for solving for the stationary points of the DLPNO–CCSD Lagrangian, in the t 1 -transformed formalism introduced earlier and as currently implemented in the P SI 4 quantum chemistry software package. These lambda equations in the local pair natural orbital basis allow for the evaluation of CCSD(T) Λ energetics with linear-scaling computational effort, also known as the asymmetric triples correction. This DLPNO–CCSD(T) Λ method allows for accurate triples contributions to be computed for larger molecules, especially in cases that CCSD(T) is known to be insufficient, such as with multireference systems and bond-breaking systems. We showcase the accuracy of our code on reaction energies, barrier heights, and noncovalent interaction energies. Also showcased are the capabilities of our code by evaluating DLPNO–CCSD(T) Λ energetics on large noncovalent dimers up to 112 atoms, as well as a rhodium catalyst complex containing 66 atoms.

Cluster chemistry↗
DOE OSTI2020

Application of Self-Interaction Corrected Density Functional Theory to Early, Middle, and Late Transition States

Density functional theory (DFT)-based methods often significantly underpredict chemical reaction barriers compared with experiments because of the tendency of DFT to over-stabilize transition states with stretched bonds due to the impact of unphysical electron self-interaction. But many reactions have early or late transition states where the transition state geometry closely resembles the reactants or products, respectively. The role of self-interaction in those cases is not known. Here we compare the performance of DFT with and without self-interaction correction (SIC) for describing the hydrogenation of CO and CO 2 catalyzed by a Lewis acid-base pair incorporated onto an aromatic cluster, using CCSD(T) results for reference. The three elementary steps in these reactions consist of an early, a middle, and a late transition. Our results show that the Perdew-Zunger SIC (PZ-SIC), implemented in the Fermi-L Lowdin orbital SIC (FLO-SIC) approach, qualitatively improves the description of the forward and reverse reaction barriers relative to uncorrected DFT for the middle transition, but not the early or late transitions. By contrast, the local scaling SIC (LSIC) method, also implemented in the FLO-SIC framework, significantly improves the calculated barriers over DFT and PZ-SIC in all but one case. Lastly, the results also show how the FLO-SIC approach can provide insight into the bonding in aromatic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nitromethane Decomposition via Automated Reaction Discovery and an Ab Initio Corrected Kinetic Model

In the explore the systematic construction of kinetic models from in silico reaction data for the decomposition of nitromethane. Our models are constructed in a computationally affordable manner by using reactions discovered through accelerated molecular dynamics simulations using the ReaxFF reactive force field. The reaction paths are then optimized to determine reaction rate parameters. We introduce a reaction barrier correction scheme that combines accurate thermochemical data from density functional theory with ReaxFF minimal energy paths. We validate our models across different thermodynamic regimes, showing predictions of gas phase CO and NO concentrations and high-pressure induction times that are similar to experimental data. The kinetic models are analyzed to find fundamental decomposition reactions in different thermodynamic regimes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Revisiting the Hole Size in Double Helical DNA with Localized Orbital Scaling Corrections

The extent of electronic wave function delocalization for the charge carrier (electron or hole) in double helical DNA plays an important role in determining the DNA charge transfer mechanism and kinetics. The size of the charge carrier’s wave function delocalization is regulated by the solvation induced localization and the quantum delocalization among the π stacked base pairs at any instant of time. Using a newly developed localized orbital scaling correction (LOSC) density functional theory method, we accurately characterized the quantum delocalization of the hole wave function in double helical B-DNA. This approach can be used to diagnose the extent of delocalization in fluctuating DNA structures. Our studies indicate that the hole state tends to delocalize among 4 guanine–cytosine (GC) base pairs and among 3 adenine–thymine (AT) base pairs when these adjacent bases fluctuate into degeneracy. The relatively small delocalization in AT base pairs is caused by the weaker π–π interaction. This extent of delocalization has significant implications for assessing the role of coherent, incoherent, or flickering coherent carrier transport in DNA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Correctly Assessing Defect Tolerance in Halide Perovskites

The notion of “defect tolerance” has often been invoked to explain the excellent performance of halide perovskites in optoelectronic applications. However, this concept has not been rigorously defined or assessed. A common interpretation is that all of the energetically favorable intrinsic defects are shallow. On the basis of examples in the prototypical halide perovskite CsPbI 3 , we show that this is not the case. The antisite defects Pb I and I Pb are energetically favorable, but also have levels deep in the band gap. Still, because of strong anharmonicity, they are not efficient nonradiative recombination centers. Here, our study demonstrates how to correctly evaluate the “defect tolerance” of halide perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Correction to “Critical Assessment of the Thermodynamics of Vacancy Formation in Fe 2 O 3 Using Hybrid Density Functional Theory”

After publication, the authors discovered two errors in the DFT data reported which partially affect Figures 2, 7, and 8. Additionally, while these errors do not affect the main findings of this work, we wish to make sure these issues do not complicate future comparisons and so we have added this correction for publication.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗