Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronal heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Quantitative analysis of bidirectional electron fluxes within coronal mass ejections at 1 AU

The solar wind electron heat flux is carried primarily by suprathermal electrons beamed antisunward along the interplanetary magnetic field. However, analysis of electron observations at 1 AU has shown that counterstreaming electron beams, suggesting closed magnetic structures, prevail within coronal mass ejections (CMEs). These structures might be magnetic 'tongues', magnetically detached plasmoids, or complex flux ropes. Here we show results of analysis of ISEE-3 observations within 39 CMEs, including the asymmetry between the two beams, its control by magnetic field orientation, and the variation of the electron distributions as CMEs convect past the spacecraft. We find that some CMEs are strongly asymmetric, with the antisunward beam generally dominant, while others contain nearly symmetric beams. The beam asymmetries, and the magnetic field orientations, exhibit characteristic trends as CMEs pass over the spacecraft. We present an example of a distinctive 'strahl-on-strahl' distribution, suggesting continued magnetic connection to the corona, in which a narrow antisunward beam is superimposed on a broader beam. Our results favor continuing magnetic connection to the Sun in a tongue or flux rope geometry rather than a fully detached plasmoid.

Phillips, J. L.↗
NASA NTRS1983

The effects of Ohmic heating and stable radiation on magnetic tearing

A study is made of the effect of a temperature-dependent Coulomb-like resistivity on the planar tearing mode. The local evolution of the temperature is described by an energy equation which includes Joule heating and optically thin radiation. The resulting system of coupled linear magnetohydrodynamic equations is solved numerically, and eigenfunctions and growth rates are obtained. In the absence of radiation, there are two distinct solutions above a critical value of the magnetic Reynolds number S, a tearing-like mode and a Joule-heating mode. Below this point, the growth rates coalesce into a conjugate-complex pair. When stable radiation (dR/dT greater than 0) is added, the heating mode disappears and a modified tearing excitation exists to much lower values of S before its growth is cut off by Ohmic heating. Examples are given for solar coronal parameters, and for those characteristic of fusion-research devices. The introduction of an effective value for the resistivity, in the presence of energy transport, allows a simple qualitative discussion of the different modes.

Tachi, T.↗
NASA NTRS1986

Rapid soft X-ray fluctuations in solar flares observed with the X-ray polychromator

Three flares observed by the Soft X-Ray Polychromator on the Solar Maximum Mission were studied. Flare light curves from the Flat Crystal Spectrometer and Bent Crystal Spectrometer were examined for rapid signal variations. Each flare was characterized by an initial fast (less than 1 min) burst, observed by the Hard X-Ray Burst Spectrometer (HXRBS), followed by softer gradual X-ray emission lasting several minutes. From an autocorrelation function analysis, evidence was found for quasi-periodic fluctuations with rise and decay times of 10 s in the Ca XIX and Fe XXV light curves. These variations were of small amplitude (less than 20%), often coincided with hard X-ray emissions, and were prominent during the onset of the gradual phase after the initial hard X-ray burst. It is speculated that these fluctuations were caused by repeated energy injections in a coronal loop that had already been heated and filled with dense plasma associated with the initial hard X-ray burst.

Zarro, D. M.↗
NASA NTRS1988

An imaging vector magnetograph for the next solar maximum

Measurements of the vector magnetic field in the solar atmosphere with high spatial and temporal resolution over a large field of view are critical to understanding the nature and evolution of currents in active regions. Such measurements, when combined with the thermal and nonthermal X-ray images from the upcoming Solar-A mission, will reveal the large-scale relationship between these currents and sites of heating and particle acceleration in flaring coronal magnetic flux tubes. The conceptual design of an imaging vector magnetograph that combines a modest solar telescope with a rotating quarter-wave plate, an acousto-optical tunable prefilter as a blocker for a servo-controlled Fabry-Perot etalon, CCD cameras, and a rapid digital tape recorder are described. Its high spatial resolution (1/2 arcsec pixel size) over a large field of view (4 x 5 arcmin) will be sufficient to significantly measure, for the first time, the magnetic energy dissipated in major solar flares. Its millisecond tunability and wide spectra range (5000 to 8000 A) enable nearly simultaneous vector magnetic field measurements in the gas-pressure-dominated photosphere and magnetically dominated chromosphere, as well as effective co-alignment with Solar-A's X-ray images.

Canfield, Richard C.↗
NASA NTRS1988

On black widow evolutionary scenarios for binary neutron stars

The scenario whereby the pulsar 1957 + 20 ablates its companion by soft gamma-ray synchrotron emission (Ruderman et al., 1988) is critically examined, with particular regard to how the outflowing material, beginning at photospheric temperatures, is heated through the cooling barrier to coronal temperatures. Assuming the conductivity to be at most the Spitzer value, this consideration is found to constrain the mass flux more than two orders of magnitude more severely than merely considering cooling near the sonic point. This would imply that the ablation scenario fails by a large margin, even if the emission from the pulsar is beamed along the orbital plane.

Eichler, David↗
NASA NTRS1997

Self-Consistent Thermal Accretion Disk Corona Models for Compact Objects. I: Properties of the Corona and the Spectrum of Escaping Radiation

We present the properties of accretion disk corona (ADC) models in which the radiation field, the temperature, and the total opacity of the corona are determined self-consistently. We use a nonlinear Monte Carlo code to perform the calculations. As an example, we discuss models in which the corona is situated above and below a cold accretion disk with a plane-parallel (slab) geometry, similar to the model of Haardt & Maraschi. By Comptonizing the soft radiation emitted by the accretion disk, the corona is responsible for producing the high-energy component of the escaping radiation. Our models include the reprocessing of radiation in the accretion disk. Here the photons either are Compton-reflected or photoabsorbed, giving rise to fluorescent line emission and thermal emission. The self- consistent coronal temperature is determined by balancing heating (due to viscous energy dissipation) with Compton cooling, determined using the fully relativistic, angle-dependent cross sections. The total opacity is found by balancing pair productions with annihilations. We find that, for a disk temperature kT(sub BB) approx. less than 200 eV, these coronae are unable to have a self-consistent temperature higher than approx. 140 keV if the total optical depth is approx. less than 0.2, regardless of the compactness parameter of the corona and the seed opacity. This limitation corresponds to the angle-averaged spectrum of escaping radiation having a photon index approx. greater than 1.8 within the 5-30 keV band. Finally, all models that have reprocessing features also predict a large thermal excess at lower energies. These constraints make explaining the X-ray spectra of persistent black hole candidates with ADC models very problematic.

Dove, James B.↗
NASA NTRS2018

Combining Sparsity DEM Inversions with Event Tracking for AIA Data

We introduce a modified version of the ASGARD code (Automated Selection and Grouping of events in A/A Regional Data). Originally written to detect and group brightenings ("events") in the AIA EUV channels, it now includes the sparsity DEM inversion method and instead detects emission measure enhancements in different temperature bins. Ultimately, the goal is to automatically determine heating and cooling rates in different coronal structures.

Bethge, Christian↗
NASA NTRS2019

Highly Structured Slow Solar Wind Emerging From an Equatorial Coronal Hole

At solar minimum, the solar wind is observed at high solar latitudes as a predominantly fast (> 500 km/s), highly Alfvenic, rarefied stream of plasma originating deep within coronal holes, while near the ecliptic plane it is interspersed with a more variable slow (< 500 kms) wind. The precise origins of the slow wind streams are less certain, with theories and observations supporting sources from the tips of helmet streamers, interchange reconnection near coronal hole boundaries, and origins within coronal holes with highly diverging magnetic fields. The heating mechanism required to drive the solar wind is also an open question and candidate mechanisms include Alfven wave turbulence, heating by reconnection in nanoflares, ion cyclotron wave heating and acceleration by thermal gradients1. At 1 au, the wind is mixed and evolved and much of the diagnostic structure of these sources and processes has been lost. Here we present new measurements from Parker Solar Probe at 36 to 54 solar radii that show clear evidence of slow, Alfvenic solar wind emerging from a small equatorial coronal hole. The measured magnetic field exhibits patches of large, intermittent reversals associated with jets of plasma and enhanced Poynting flux and interspersed in a smoother and less turbulent flow with near-radial magnetic field. Furthermore, plasma wave measurements suggest electron and ion velocity-space micro-instabilities that have been identified with plasma heating and thermalization processes. Our measurements suggest an impulsive mechanism associated with solar wind energization and a heating role for micro-instabilities and provide strong evidence for low latitude coronal holes as a significant contribution to the source of the slow solar wind.

Solar physics↗
NASA NTRS2002

Microphysics of Waves and Instabilities in the Solar Wind and Their Macro Manifestations in the Corona and Interplanetary Space

A breakthrough resulted from the investigation of plasma heating by ion-cyclotron waves in rapidly expanding flow tubes, often referred to as coronal funnels and expected to originate in the low transition region where the temperature gradient in the solar atmosphere rises very sharply. The investigation was made using a three-fluid plasma consisting of protons, electrons and alpha particles. It was found that these waves heat the solar wind plasma by directly heating the heavier species, namely the alphas. Although only alpha particles dissipate the waves, the strong Coulomb coupling between alpha particles and protons, and between protons and electrons, makes it possible for protons and electrons to be heated also to more than one million degrees, i.e. to coronal temperatures. Interestingly, the extreme heating of the alpha particles, however, is such that they end up being hotter and faster, and are no longer in thermal equilibrium with the protons and electrons. once the rapid expansion of the flow tube is complete, the particles return to thermal equilibrium. The observational signatures of these results are such that if spectral lines formed below a million degrees are observed at different heights in the corona, the inferred outflow velocities may vary by a factor of 5 to 6. In addition, if minor ions are indeed much faster than protons and electrons at temperatures below a million degrees, then one cannot reliably determine the bulk outflow velocity of the solar wind in that region from inferences of minor ion outflow velocities. A detailed parameter study on the resonant interaction between ion cyclotron waves and alpha particles and other minor ions is also under way. It is found that the highest frequency of the waves, or the location of the heating determines whether a thermal equilibrium can be established between minor ions and protons. As the maximum frequency is increased, alpha particles and protons become farther away from thermal equilibrium. As the maximum frequency becomes smaller, alpha particles and protons are more likely to be in thermal equilibrium. However, if the maximum frequency is below a critical value, ion cyclotron resonance occurs at a greater height and a hot corona cannot be produced.

Habbal, Shadia Rifai↗
NASA NTRS1995

Solar wind helium observations on the Prognoz 7 satellite

Solar wind data obtained with ion mass-energy-spectrometer on the Prognoz 7 satellite are analyzed to study the alpha-particle and proton features in different types of solar wind streams. In the streams from coronal holes the abundance of helium relative to proton slightly increases with increasing solar wind flux and proton density while in the streams from coronal streamers it decreases. These results indicate that the mechanisms of solar wind formation in different regions of solar corona differ. Preferential alpha-particle acceleration and heating are often observed in the streams from coronal holes. Minimum (as well as negative) values of alpha-proton velocity difference are recorded in the heliospheric current sheet, shocked plasma, and coronal mass ejections. Dependences of alpha-proton velocity difference and temperature ratio on several MHD parameters (Alfven velocity, number of Coulomb collisions. etc.) are compared for different types of streams. For velocity difference the dependences in streams from coronal holes and streamers are often similar to each other, and they differ from the ones in the heliospheric current sheet. For temperature ratio the dependences in heliospheric current sheet and streams from coronal streamers are similar, and they differ in streams from coronal holes.

Yermolaev, Yu. I.↗
NASA NTRS1986

Particle propagation, wave growth and energy dissipation in a flaring flux tube

Wave amplification by downgoing particles in a common flare model is investigated. The flare is assumed to occur at the top of a coronal magnetic flux loop, and results in the heating of plasma in the flaring region. The hot electrons propagate down the legs of the flux tube towards increasing magnetic field. It is simple to demonstrate that the velocity distributions which result in this model are unstable to both beam instabilities and cyclotron maser action. An explanation is presented for the propagation effects on the distribution, and the properties of the resulting amplified waves are explored, concentrating on cyclotron maser action, which has properties (emission in the z mode below the local gyrofrequency) quite different from maser action by other distributions considered in the context of solar flares. The z mode waves will be damped in the coronal plasma surrounding the flaring flux tube and lead to heating there. This process may be important in the overall energy budget of the flare. The downgoing maser is compared with the loss cone maser, which is more likely to produce observable bursts.

White, S. M.↗
NASA NTRS1986

Beam-induced pressure gradients in the early phase of proton-heated solar flares

The pressure gradient induced in a coronal loop by proton beam momentum deposition is calculated and compared with the thermal pressure gradient arising from nonuniform deposition of beam energy; it is assumed that the transfer of momentum and energy from beam to target occurs via the Coulomb interaciton. Results are presented for both a low mean energy and a high mean energy proton beam injected at the loop apex and characterized by a power-law energy spectrum. The present treatment takes account of the breakdown of the cold target approximation for the low-energy proton beam in the corona, where the thermal speed of target electrons exceeds the beam speed. It is found that proton beam momentum deposition plays a potentially significant role in flare dynamics only in the low mean energy case and only in the corona, where it may dominate the acceleration of target material for as long as several tens of seconds. This conclusion suggest that the presence of low-energy nonthermal protons may be inferred from velocity-sensitive coronal observations in the early impulsive phase.

Tamres, David H.↗
NASA NTRSDate not supplied

The Coronal Microscale Observatory

It has been a longstanding challenge to identify the mechanisms responsible for heating the solar corona, in part because heating, whether by waves or magnetic reconnection, is thought to be concentrated in thus far unresolved volumes with characteristic scales ≲100 km. The Coronal Microscale Observatory (CMO) is a mission concept designed to image these microscale heating events, identify the dominant physical mechanisms that control their initiation and evolution, and understand their effects on the formation of the solar wind. CMO positions three spacecraft and three instruments near the Sun-Earth L1 Lagrange point. One instrument is a cluster of 6 coaligned extreme ultraviolet (EUV) telescopes that image a common field of view with ultrahigh angular resolution (0.02−0.07 arcsec) in narrow wavelength bands, each sensitive to emission from plasma in a limited temperature range. The second instrument is a multi-band, full-disk, externally occulted coronagraph. Finally, a two-band fine scale EUV imager (resolution 0.3 arcsec) provides a larger field of view for context and additional science. The three CMO craft fly in precise formation to ensure that the EUV imagers point to a desired target on the Sun and the external occulter accurately blocks the solar disk. The novel mission architecture arises from the intrinsically long EUV focal length (≳100 m) of diffractive optics known as photon sieves, which achieve nearly diffraction-limited EUV imaging but require a distributed telescope, in which the optics and- the image sensors are on separate spacecraft. Two spacecraft are also needed to position an external occulter 200 m in front of the coronagraph, which enables visible-light imaging of the corona very close to the solar limb with undiminished angular resolution. Recent advances in fabricating ultraprecise and smooth reflective optics suggest that a conventional (single spacecraft)EUV “microscope” may now be feasible in an Explorer-class mission that could achieve a subset of the scientific objectives of CMO.

Douglas Rabin↗
NASA NTRS1992

The X ray corona, the coronal hole, and the heliosphere

The question of why the sun heats the corona in active regions with an energy input of 10 exp 7 erg sq cm/s is addressed. It is argued that the trapped gas is heated by the intermittent dissipation of magnetic energy (nanoflares) at the current sheets that arise spontaneously in any magnetic field subject to continuous deformation. Most of the heat input is close to the sun, in the first 1-2 RS, raising the gas slowly out through the gravitational field and gradually accelerating it through the speed of sound at a distance of about 3-5 RS. The only source for the principle heat input close to the sun appears to be the network activity; thus the mass loss and the formation of the heliosphere are primarily a consequence of the smallest-scale activity supplemented by occasional flares and coronal mass ejections. The X-ray emission is largely a consequence of the smallest flares, the nanoflares, supplemented by occasional X-ray bursts from large flares.

Parker, E. N.↗
NASA NTRS1995

Acceleration and heating of heavy ions in high speed solar wind streams

Left hand polarized Alfven waves generated in coronal holes propagate in the direction of high speed solar wind streams, accelerating and heating heavy ions. As the solar wind expands, the ratio between the frequency of the Alfven waves and the proton gyrofrequency increases, due to the decrease of the interplanetary magnetic field, and encounter first the local ion gyrofrequency of the species with the largest M(sub l) = m(sub l)/z(sub l)m(sub p) (m(sub l) is the mass of species l, m(sub p) is the proton mass and z(sub l) is the degree of ionization of species l). It is shown that the Alfven waves experience there strong absorption and cannot propagate any further until the ions are accelerated and heated. Once this occurs, the Alfven waves continue to propagate until they meet the gyrofrequency of the next species giving rise to a similar phenomenon. In order to show this contention, we use the linear dispersion relation of ion cyclotron waves in a multicomponent plasma consisting of oxygen ions, alpha particles and protons. We assume that at any distance from the sun, the Alfven waves follow the local dispersion relation of electromagnetic ion cyclotron waves. To illustrate the results, we solve the dispersion relation for oxygen ions and alpha particles drifting relative to the protons. The dispersion relation has three branches. The first branch starts at zero frequency and goes to the Doppler-shifted oxygen ion gyrofrequency. The second branch starts close to the oxygen gyrofrequency, and goes to the Doppler-shifted alpha particle gyrofrequency. The third branch starts close to the alpha particle gyrofrequency, and goes to the proton gyrofrequency. The Alfven waves propagate following the first branch of the dispersion relation. When they reach the Doppler-shifted oxygen ion gyrofrequency, the ions are accelerated and heated to some definite values. When these values are reached, the dispersion relation changes, and it is now the first branch of the dispersion relation, the one which goes to the Doppler-shifted alpha particle gyrofrequency. The Alfven waves continue to propagate along the first branch of the dispersion relation and proceed to accelerate and heat the alpha particles.

Gomberoff, L.↗
NASA NTRS1984

A consistent picture of coronal and chromospheric processes in a well-observed solar flare

The solar flare of 15:22 UT on June 24, 1980 is analyzed using simultaneous observations in hard X-rays, soft X-rays, and H-alpha line profiles obtained from instruments aboard the Solar Maximum Mission and ground-based instruments. The theoretical H-alpha profiles of Canfield, Gunkler, and Ricchiazzi (1984) are used to analyze the H-alpha data, and the work of Hummer and Rybicki (1968) is used to provide qualitative velocity information. The soft X-ray data are employed to obtain coronal measurements of parameters of interest, while the flux and spectrum of the hard X-rays are used to calculate the peak power of nonthermal electrons. Various flare phenomena are studied, including heating of the chromosphere by nonthermal electrons, enhanced coronal pressure, enhanced thermal conduction, chromospheric evaporation and mass motion. It is shown that the observations strongly suggest a scenario in which two large magnetic loop systems interact to provide the flare energy.

Gunkler, T. A.↗
NASA NTRS1998

A Two-Fluid, MHD Coronal Model

We describe first results from a numerical two-fluid MHD model of the global structure of the solar corona. The model is two-fluid in the sense that it accounts for the collisional energy exchange between protons and electrons. As in our single-fluid model, volumetric heat and momentum sources are required to produce high speed wind from coronal holes, low speed wind above streamers, and mass fluxes similar to the empirical solar wind. By specifying different proton and electron heating functions we obtain a high proton temperature in the coronal hole and a relatively low proton temperature in the streamer (in comparison with the electron temperature). This is consistent with inferences from SOHO/UVCS, and with the Ulysses/SWOOPS proton and electron temperature measurements which we show from the fast latitude scan. The density in the coronal hole between 2 solar radii and 5 solar radii (2RS and 5RS) is similar to the density reported from SPARTAN 201-01 measurements by Fisher and Guhathakurta. The proton mass flux scaled to 1 AU is 2.4 x 10(exp 8)/sq cm s, which is consistent with Ulysses observations. Inside the closed field region, the density is sufficiently high so that the simulation gives equal proton and electron temperatures due to the high collision rate. In open field regions (in the coronal hole and above the streamer) the proton and electron temperatures differ by varying amounts. In the streamer, the temperature and density are similar to those reported empirically by Li et al and the plasma beta is larger than unity everywhere above approx. 1.5 R(sub s), as it is in all other MHD coronal streamer models.

Suess, Steven T.↗
NASA NTRS2010

Constraints on CME Evolution from in situ Observations of Ionic Charge States

We present a novel procedure for deriving the physical properties of Coronal Mass Ejections (CMES) in the corona. Our methodology uses in-situ measurements of ionic charge states of C, O, Si and Fe in the heliosphere and interprets them in the context of a model for the early evolution of ICME plasma, between 2 - 5 R-solar. We find that the data can be fit only by an evolution that consists of an initial heating of the plasma, followed by an expansion that ultimately results in cooling. The heating profile is consistent with a compression of coronal plasma due to flare reconnect ion jets and an expansion cooling due to the ejection, as expected from the standard CME/flare model. The observed frozen-in ionic charge states reflect this time-history and, therefore, provide important constraints for the heating and expansion time-scales, as well as the maximum temperature the CME plasma is heated to during its eruption. Furthermore, our analysis places severe limits on the possible density of CME plasma in the corona. We discuss the implications of our results for CME models and for future analysis of ICME plasma composition.

Gruesbeck, Jacob R.↗