Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronal heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Solar coronal hole simulations compared with interpretations of Yohkoh SXT observations

Recent observations of coronal holes made with the soft X-ray telescope aboard Yohkoh have indicated a temperature of 1.8 approximately 2.1 x 10(exp 6) K and an emission measure of 10(exp 25.7 approximately 26.2) cm (exp -5). This is almost the same as in quiet regions of the Sun. Numerical simulations of the temperature density and velocity structure in a coronal hole. using a parameterized heating distribution have been used for a comparison with the Yohkoh observations. Models are obtained which fit the observed temperature and emission measure. with heating fluxes which are consistent with other measurements. However, the final velocity of the solar wind is very slow which indicates the necessity of another acceleration mechanism such as alfven waves.

Tziotziou, K.↗
NASA NTRS2014

Simulated Time Lags of Hinode/XRT and SDO/AIA Lightcurves as an Indication of Loop Heating Scenario

The precise nature of the heating mechanism (location, duration) in coronal loops is still a matter of enormous research. We present results from a 1D hydrodynamic loop simulation of a coronal loop which was run using different parameters such as loops length (50, 200, and 500 Mm), maximum temperature reached (3MK and 10MK), and abundances. For each scenario the model outputs were used to calculate the corresponding lightcurves as seen by XRT/Be-thin and various EUV AIA channels. The lag time between the peak of these lightcurves was computed using cross-correlation and plotted as a function of loop length. Additional results were computed using the 0D EBTEL code in order to test the compatibility of the two codes and to investigate additional loop lengths. Initial results indicate that the long (greater than 5000s) lags observed in the approx. 100Mm loops of active regions can only be reproduced using photospheric abundances and much longer loop lengths.

Alexander, Caroline↗
NASA NTRS1978

He-3-rich flares - A possible explanation

A plasma mechanism is proposed to explain the dramatic enhancements in He-3 observed in He-3-rich flares. It is shown that a common current instability in the corona may heat ambient He-3(2+) over any other ion and thus may preferentially inject He-3 into the flare acceleration process. This mechanism operates when the abundance of He-4 and heavier elements is larger than normal in the coronal plasma. It may also preferentially heat and thus inject certain ions of iron. The mechanism thus provides a possible explanation for the observed correlation between He-3 and heavy enhancements in He-3-rich flares.

Fisk, L. A.↗
NASA NTRS1989

Heat flux in a non-Maxwellian plasma

A hybrid numerical scheme is applied to solve the Landau equation for the electron distribution function over all velocity space. Evidence is presented for the first time of the degree and character of the failure of the classical Spitzer-Haerm heat flux approximation in a realistic solar coronal loop structure. In the loop model used, the failure is so severe at some points that the role of the heat flux in the plasma's energy balance is completely misinterpreted. In the lower corona the Spitzer-Haerm approximation predicts that the heat flux should act as an energy source, whereas the more accurate distribution functions calculated here show this to be an energy sink.

Ljepojevic, N. N.↗
NASA NTRS1997

The Multi-Spectral Solar Telescope Array (MSSTA)

In 1987, our consortium pioneered the application of normal incidence multilayer X-ray optics to solar physics by obtaining the first high resolution narrow band, "thermally differentiated" images of the corona', using the emissions of the Fe IX/Fe X complex at ((lambda)lambda) approx. 171 A to 175 A, and He II Lyman (beta) at 256 A. Subsequently, we developed a rocket borne solar observatory, the Multi Spectral Solar Telescope Array (MSSTA) that pioneered multi-thermal imaging of the solar atmosphere, using high resolution narrow band X-ray, EUV and FUV optical systems. Analysis of MSSTA observations has resulted in four significant insights into the structure of the solar atmosphere: (1) the diameter of coronal loops is essentially constant along their length; (2) models of the thermal and density structure of polar plumes based on MSSTA observations have been shown to be consistent with the thesis that they are the source of high speed solar wind streams; (3) the magnetic structure of the footpoints of polar plumes is monopolar, and their thermal structure is consistent with the thesis that the chromosphere at their footpoints is heated by conduction from above; (4) coronal bright points are small loops, typically 3,500 - 20,000 km long (5 sec - 30 sec); their footpoints are located at the poles of bipolar magnetic structures that are are distinguished from other network elements by having a brighter Lyman a signature. Loop models derived for 26 bright points are consistent with the thesis that the chromosphere at their footpoints is heated by conduction from the corona.

Walker, A. B. C., Jr.↗
NASA NTRS2012

Enthalpy-Based Thermal Evolution of Loops: III. Comparison of Zero-Dimensional Models

Zero dimensional (0D) hydrodynamic models, provide a simple and quick way to study the thermal evolution of coronal loops subjected to time-dependent heating. This paper presents a comparison of a number of 0D models that have been published in the past and is intended to provide a guide for those interested in either using the old models or developing new ones. The principal difference between the models is the way the exchange of mass and energy between corona, transition region and chromosphere is treated, as plasma cycles into and out of a loop during a heating-cooling cycle. It is shown that models based on the principles of mass and energy conservation can give satisfactory results at some, or, in the case of the Enthalpy Based Thermal Evolution of Loops (EBTEL) model, all stages of the loop evolution. Empirical models can lead to low coronal densities, spurious delays between the peak density and temperature, and, for short heating pulses, overly short loop lifetimes.

Cargill, P. J.↗
NASA NTRS1978

The association of nonthermal electrons with non-flaring coronal transients

A close temporal and spatial association has been found between erupting filaments/coronal transients and radio noise storm continua. The three transients studied occurred away from active regions and are members of a class not usually accompanied by chromospheric emission. The data analyzed were from the S-054 soft X-ray telescope on Skylab and from one- and two-dimensional interferometers at meter and decameter wavelengths at Nancay and Clark Lake observatories. Calculations confirmed that observed microwave radiation from the transients is due to thermal bremsstrahlung. The results are consistent with an interpretation of heating of an increased amount of coronal plasma by nonthermal, 10-100 keV electrons. Three possibilities for the source of the material are described: (1) the filament material; (2) evaporation from the chromosphere or transition region; and (3) via a long-lived reconnection process.

Webb, D. F.↗
NASA NTRS1984

Resonances of coronal loops

It is pointed out that any theoretical demonstration that the solar corona can be heated by waves requires a demonstration that the required energies can actually be carried from the convection zone to the corona by waves. In addition, it must be shown that the waves can dissipate their energy into heat in the corona. The present investigation is concerned specifically with the heating of closed magnetic structures in the corona, taking into account coronal loops or active region loops. Attention is given to the MHD Alfven wave. It is shown analytically that coronal active region loops can behave much like interference filters. The coronal part of the loop acts like a resonant cavity for Alfven waves. When the resonances are excited, large energy fluxes can be carried into the loop by Alfven waves which are generated in the solar convection zone. It is estimated that the energy fluxes can power the observed loops.

Hollweg, J. V.↗
NASA NTRS1987

The eastward deflection of fast coronal mass ejecta in interplanetary space

Previous work has shown that a bidirectional solar wind electron heat flux is one of the more prominent signatures of a coronal mass ejection event in the solar wind at 1 AU. Using ISEE 3 solar wind electron measurements obtained during 1978 and 1979, this signature was used to identify the fast coronal mass ejecta driving 19 interplanetary shocks. In 17 of the 19 shock events an eastward deflection of the ejection plasma (apparent arrival from west of the sun) was observed. The average eastward deflection for all of the events was about 3 deg, corresponding to a typical transverse velocity of 25 km/s. Usually an oppositely directed (i.e., westward) flow deflection of comparable magnitude was observed within the compressed ambient plasma ahead of the ejecta. The sense of these deflections - first westward within the compressed ambient plasma and then eastward within the ejecta - is the same as is observed near the leading edges of quasi-stationary, corotating high speed streams.

Gosling, J. T.↗
NASA NTRS2019

Satellite Orbital Drag During Magnetic Storms

We investigate satellite orbital drag effects at lowEarth orbit associated with thermosphere heating during magnetic storms caused by coronal mass ejections. CHAllenge Minisatellite Payload (CHAMP) and Gravity Recovery And Climate Experiment (GRACE) neutral density data are used to compute orbital drag. Stormtoquiet density comparisons are performed with background densities obtained by the JacchiaBowman 2008 (JB2008) empirical model. Our storms are grouped in different categories regarding their intensities as indicated by minimum values of the SYMH index. We then perform superposed epoch analyses with storm main phase onset as zero epoch time. In general, we find that orbital drag effects are larger for CHAMP (lower altitudes) in comparison to GRACE (higher altitudes). Results show that storm time drag effects manifest first at high latitudes, but for extreme storms, particularly observed by GRACE, stronger orbital drag effects occur during early main phase at low/equatorial latitudes, probably due to heating propagation from high latitudes. We find that storm time orbital decay along the satellites' path generally increases with storm intensity, being stronger and faster for the most extreme events. For these events, orbital drag effects decrease faster probably due to elevated cooling effects caused by nitric oxide, which introduce modeled density uncertainties during storm recovery phase. Errors associated with total orbit decay introduced by JB2008 are generally the largest for the strongest storms and increase during storm times, particular during recovery phases. We discuss the implication of these uncertainties for the prediction of collision between space objects at lowEarth orbit during magnetic storms.

Oliveira, D. M.↗
NASA NTRS1995

Some constraints on acceleration mechanisms in the solar wind at polar latitudes

Observations of solar Lyman alpha have been interpreted as indicating that the polar mass flux density is lower than the equatorial average. This led Lallement et al (1986) to make a parametric study of solar wind acceleration, along the lines of earlier the Munro-Jackson study (1977), in which they concluded that uncertainties in the polar mass flux were large enough to be consistent with two extreme opposites: (1) a substantial energy supply beyond classical thermal conduction is required; or (2) classical thermal conduction is adequate to drive the flow. This ambiguity has been clarified by Ulysses observations of the polar outflow (Phillips et al, 1994). The polar mass flux density lies in the middle of the range studies by Lallement et al (1986), which suggests that extended heating is going on out to at least approximately 5 AU. Independent, purely energetic arguments can be made to estimate the required coronal source (electron) temperature that would be required to account for the observed energy flux density. An electron temperature of at least 2 x 10(exp 6) K would be required for the classical conduction flux density to be comparable to the total energy flux density; such a high temperature is thought to be unlikely in a coronal hole. These arguments strongly suggest that some extended heating or momentum transfer mechanism is required to drive the solar wind from the polar coronal hole. A number of mechanisms are discussed.

Barnes, A.↗
NASA NTRS1992

Quantitative analysis of bidirectional electron fluxes within coronal mass ejections at 1 AU

The solar wind electron heat flux is carried primarily by suprathermal electrons beamed antisunward along the interplanetary magnetic field. However, analysis of electron observations at 1 AU has shown that counterstreaming electron beams, suggesting closed magnetic structures, prevail within coronal mass ejections (CMEs). These structures might be magnetic 'tongues', magnetically detached plasmoids, or complex flux ropes. Here we show results of analysis of ISEE-3 observations within 39 CMEs, including the asymmetry between the two beams, its control by magnetic field orientation, and the variation of the electron distributions as CMEs convect past the spacecraft. We find that some CMEs are strongly asymmetric, with the antisunward beam generally dominant, while others contain nearly symmetric beams. The beam asymmetries, and the magnetic field orientations, exhibit characteristic trends as CMEs pass over the spacecraft. We present an example of a distinctive 'strahl-on-strahl' distribution, suggesting continued magnetic connection to the corona, in which a narrow antisunward beam is superimposed on a broader beam. Our results favor continuing magnetic connection to the Sun in a tongue or flux rope geometry rather than a fully detached plasmoid.

Phillips, J. L.↗
NASA NTRS1983

The effects of Ohmic heating and stable radiation on magnetic tearing

A study is made of the effect of a temperature-dependent Coulomb-like resistivity on the planar tearing mode. The local evolution of the temperature is described by an energy equation which includes Joule heating and optically thin radiation. The resulting system of coupled linear magnetohydrodynamic equations is solved numerically, and eigenfunctions and growth rates are obtained. In the absence of radiation, there are two distinct solutions above a critical value of the magnetic Reynolds number S, a tearing-like mode and a Joule-heating mode. Below this point, the growth rates coalesce into a conjugate-complex pair. When stable radiation (dR/dT greater than 0) is added, the heating mode disappears and a modified tearing excitation exists to much lower values of S before its growth is cut off by Ohmic heating. Examples are given for solar coronal parameters, and for those characteristic of fusion-research devices. The introduction of an effective value for the resistivity, in the presence of energy transport, allows a simple qualitative discussion of the different modes.

Tachi, T.↗
NASA NTRS1986

Rapid soft X-ray fluctuations in solar flares observed with the X-ray polychromator

Three flares observed by the Soft X-Ray Polychromator on the Solar Maximum Mission were studied. Flare light curves from the Flat Crystal Spectrometer and Bent Crystal Spectrometer were examined for rapid signal variations. Each flare was characterized by an initial fast (less than 1 min) burst, observed by the Hard X-Ray Burst Spectrometer (HXRBS), followed by softer gradual X-ray emission lasting several minutes. From an autocorrelation function analysis, evidence was found for quasi-periodic fluctuations with rise and decay times of 10 s in the Ca XIX and Fe XXV light curves. These variations were of small amplitude (less than 20%), often coincided with hard X-ray emissions, and were prominent during the onset of the gradual phase after the initial hard X-ray burst. It is speculated that these fluctuations were caused by repeated energy injections in a coronal loop that had already been heated and filled with dense plasma associated with the initial hard X-ray burst.

Zarro, D. M.↗
NASA NTRS1988

An imaging vector magnetograph for the next solar maximum

Measurements of the vector magnetic field in the solar atmosphere with high spatial and temporal resolution over a large field of view are critical to understanding the nature and evolution of currents in active regions. Such measurements, when combined with the thermal and nonthermal X-ray images from the upcoming Solar-A mission, will reveal the large-scale relationship between these currents and sites of heating and particle acceleration in flaring coronal magnetic flux tubes. The conceptual design of an imaging vector magnetograph that combines a modest solar telescope with a rotating quarter-wave plate, an acousto-optical tunable prefilter as a blocker for a servo-controlled Fabry-Perot etalon, CCD cameras, and a rapid digital tape recorder are described. Its high spatial resolution (1/2 arcsec pixel size) over a large field of view (4 x 5 arcmin) will be sufficient to significantly measure, for the first time, the magnetic energy dissipated in major solar flares. Its millisecond tunability and wide spectra range (5000 to 8000 A) enable nearly simultaneous vector magnetic field measurements in the gas-pressure-dominated photosphere and magnetically dominated chromosphere, as well as effective co-alignment with Solar-A's X-ray images.

Canfield, Richard C.↗
NASA NTRS1988

On black widow evolutionary scenarios for binary neutron stars

The scenario whereby the pulsar 1957 + 20 ablates its companion by soft gamma-ray synchrotron emission (Ruderman et al., 1988) is critically examined, with particular regard to how the outflowing material, beginning at photospheric temperatures, is heated through the cooling barrier to coronal temperatures. Assuming the conductivity to be at most the Spitzer value, this consideration is found to constrain the mass flux more than two orders of magnitude more severely than merely considering cooling near the sonic point. This would imply that the ablation scenario fails by a large margin, even if the emission from the pulsar is beamed along the orbital plane.

Eichler, David↗
NASA NTRS1997

Self-Consistent Thermal Accretion Disk Corona Models for Compact Objects. I: Properties of the Corona and the Spectrum of Escaping Radiation

We present the properties of accretion disk corona (ADC) models in which the radiation field, the temperature, and the total opacity of the corona are determined self-consistently. We use a nonlinear Monte Carlo code to perform the calculations. As an example, we discuss models in which the corona is situated above and below a cold accretion disk with a plane-parallel (slab) geometry, similar to the model of Haardt & Maraschi. By Comptonizing the soft radiation emitted by the accretion disk, the corona is responsible for producing the high-energy component of the escaping radiation. Our models include the reprocessing of radiation in the accretion disk. Here the photons either are Compton-reflected or photoabsorbed, giving rise to fluorescent line emission and thermal emission. The self- consistent coronal temperature is determined by balancing heating (due to viscous energy dissipation) with Compton cooling, determined using the fully relativistic, angle-dependent cross sections. The total opacity is found by balancing pair productions with annihilations. We find that, for a disk temperature kT(sub BB) approx. less than 200 eV, these coronae are unable to have a self-consistent temperature higher than approx. 140 keV if the total optical depth is approx. less than 0.2, regardless of the compactness parameter of the corona and the seed opacity. This limitation corresponds to the angle-averaged spectrum of escaping radiation having a photon index approx. greater than 1.8 within the 5-30 keV band. Finally, all models that have reprocessing features also predict a large thermal excess at lower energies. These constraints make explaining the X-ray spectra of persistent black hole candidates with ADC models very problematic.

Dove, James B.↗
NASA NTRS2018

Combining Sparsity DEM Inversions with Event Tracking for AIA Data

We introduce a modified version of the ASGARD code (Automated Selection and Grouping of events in A/A Regional Data). Originally written to detect and group brightenings ("events") in the AIA EUV channels, it now includes the sparsity DEM inversion method and instead detects emission measure enhancements in different temperature bins. Ultimately, the goal is to automatically determine heating and cooling rates in different coronal structures.

Bethge, Christian↗