Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “converter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Preventing Voltage Divergence in Series-Stacked Bidirectional Battery Energy Storage DC-DC Converter under Asymmetrical Operating Conditions

DC stacked topologies have gained popularity for interfacing individual photovoltaic panels to a high-voltage DC bus. A similar approach can be used to interface individual battery packs to the same DC bus, which allows active balancing of battery substrings and the use of lower voltage switches. Any imbalance in battery current, however, can cause the converter output voltages to diverge. This paper describes the source of voltage divergence and demonstrates a solution that allows seamless stacking of multiple battery packs to be interfaced to a high voltage DC bus. To prevent the voltage divergence phenomenon and allow asymmetrical battery charging for efficient battery state of charge management, the PI-based decentralized voltage control enabling both capacitor voltage sharing and asymmetrical capacitor voltage control is proposed. The effectiveness of the decentralized voltage control strategy is demonstrated through controller hardware-in-the-loop test results.

Kim, Namwon↗
DOE OSTI2021

Process for converting alkanes to olefins

A process and apparatus for converting an alkane to an olefin. In one embodiment, the process involves oxidative coupling of an alkane, e.g., methane, with an oxidant, such as air, to produce an olefin having twice the number of carbon atoms as the alkane, e.g., ethylene. In another embodiment, the process involves oxidative dehydrogenation of an alkane, e.g., ethane, with an oxidant to form an olefin having the same number of carbon atoms as the alkane, e.g., ethylene. The process involves passing a flow of the oxidant from a first flow passage through a porous medium; diffusing a flow of the alkane from a second flow passage into the porous medium; and contacting the reactant alkane and the oxidant in the presence of a catalyst within the porous medium to produce the olefin.

Weissman, Jeffrey G.↗
DOE OSTI2021

Midfidelity Model Verification for a Point-Absorbing Wave Energy Converter with Linear Power Takeoff: Preprint

In the preliminary design stage of a wave energy converter (WEC), fast and reliable simulation tools are required. High-fidelity numerical models are usually employed to study the wave-structure interaction, yet the computational cost is demanding. Instead, mid-fidelity models provide simulations in the order of real time. In this study, Uppsala University WEC operates in a relatively mild sea state and is modeled using WEC-Sim. The model is verified based on OpenFOAM simulations. To analyze the ability of mid-fidelity model to capture the WEC dynamics, the system is investigated separately in 1, 2 and 3 DoF. The contribution of viscous phenomena is examined. Moreover, linear and weakly non-linear solutions provided by WEC-Sim are studied. The results obtained indicate that the viscous effects in heave and surge motion can be neglected but not for the pitch. The weakly non-linear WEC-Sim solution successfully agrees with the CFD, whereas the linear solution could drive to misleading results.

CFD↗
DOE OSTI2021

Midfidelity Model Verification for a Point-Absorbing Wave Energy Converter with Linear Power Take-Off

In the preliminary design stage of a wave energy converter (WEC), fast and reliable simulation tools are required. High-fidelity numerical models are usually employed to study the wave-structure interaction, yet the computational cost is demanding. Instead, mid-fidelity models provide simulations in the order of real time. In this study, Uppsala University WEC operates in a relatively mild sea state and is modeled using WEC-Sim. The model is verified based on OpenFOAM simulations. To analyze the ability of mid-fidelity model to capture the WEC dynamics, the system is investigated separately in 1, 2 and 3 DoF. The contribution of viscous phenomena is examined. Moreover, linear and weakly non-linear solutions provided by WEC-Sim are studied. The results obtained indicate that the viscous effects in heave and surge motion can be neglected but not for the pitch. The weakly non-linear WEC-Sim solution successfully agrees with the CFD, whereas the linear solution could drive to misleading results.

CFD↗
DOE OSTI2021

A Self-Synchronizing Underwater Acoustic Network for Mooring Load Monitoring of a Wave Energy Converter

This paper reports on the development of a self-synchronizing underwater acoustic network developed for remote monitoring of mooring loads in Wave Energy Converters (WECs). This network uses Time Division Multiple Access and operates self-contained with the ability for users to remotely transmit commands to the network as needed. Each node is a self-contained unit, consisting of a protocol adaptor board, an FAU-DPAM underwater acoustic modem and a battery pack. A node can be connected to a load cell, to a topside user or to the WEC. Every node is swapable. The protocol adaptor board, named Protocol Adaptor for Digital LOad Cell (PADLOC) supports a variety of digital load cell message formats (CAN, MODBUS, custom ASCII) and underwater acoustic modem serial formats. PADLOC enables topside users to connect to separate load cells through a user-specific command. This is especially important if the user is monitoring multiple load cells during deployment or maintenance, when the primary data system may be offline. Each PADLOC board handles formatting, buffering and has a one-on-one serial connection with each pair (node) of a digital load cell and acoustic modem. In addition, each PADLOC board handles the timekeeping and power saving features for each node. The only limitation is the data bit rate and delay limitations associated with the underwater acoustic modem. A four node self-synchronizing network has been developed to demonstrate the load cell monitoring capability using the PADLOC technology on the CalWave WEC.

acoustic↗
DOE OSTI2021

Supporting the Transition from Grid-Scale to Emerging Market Wave Energy Converter Design and Assessment

In the past decade there has been increasing interest in emerging markets for wave energy, both as a stepping stone for development and as a way to create new opportunities for offshore markets such as ocean observation or desalination. Developers who were once focused exclusively on grid-scale development have begun to engage with more unique markets. This has led researchers to begin examining means of assessing emerging-market devices. In this paper, we analyze the Technology Performance Level (TPL) Assessment for its potential use in the assessment of emerging market wave energy converters (EM-WECs). We use Quality Function Deployment (QFD) and a question-by-question analysis of the TPL assessment to determine the changes necessary for such an assessment to be applicable in emerging markets. We discuss how the primary differences between the markets could impact the viable development pathways for developers hoping to succeed in multiple markets. We determine that the different stakeholders and stakeholder requirements of some emerging markets compared to gridscale applications should be met with changes to cost-toperformance metrics, prototype testing processes, recovery planning, materials selection, optimization objectives, and public engagement.

blue economy↗
DOE OSTI2021

Low inductance bus assembly and power converter apparatus including the same

An apparatus, such as a power converter, includes first, second and third core bus plates arranged in parallel. The apparatus also includes a first bus extension plate joined to the first core bus plate and extending therefrom at a first angle and a second bus extension plate joined to the second core bus plate and extending therefrom at a second angle. The apparatus further includes a third bus extension plated joined with the third core bus plate and disposed parallel to the first bus extension plate and a fourth bus extension plate joined with the third core bus plate and disposed parallel to the second bus extension plate.

Nojima, Geraldo↗
DOE OSTI2021

Fully integrated multi-phase buck converter with coupled air core inductors

A multi-phase buck switching converter having grouped pairs of phases, each phase using two magnetically coupled air-core inductors. For each group, a first driver circuit controlling switching of a first power transistor switching circuit coupled to a first air-core inductor output for driving an output load at the first phase. A second driver circuit controlling switching of a second power transistor switching circuit coupled to a second air-core inductor output for driving said output load at the second phase. The first and second phases are spaced 180° apart. The coupled air-core inductors per group of such orientation, separation distance and mutual inductance polarity relative to each other such that magnetic coupling between the two or more inductors at each phase results in a net increase in effective inductance per unit volume. Each air-core inductor is a metal slab of defined length, height and thickness formed using back-end-of-line semiconductor manufacturing process.

Zhang, Xin↗
DOE OSTI2021

Method to convert a written procedure to structured data, and related systems and methods

Various embodiments described in this disclosure relate to methods and computer-based systems that implement those methods for converting tasks performed as part of a procedure into dynamic procedure tasks. Such dynamic procedure tasks may be used by computer-based procedure solutions to create highly dynamic computer-based procedures.

Oxstrand, Johanna H.↗
DOE OSTI2021

Multiplexing-Based Flyback Converter for Multi-Port USB Power Delivery with True Power-Sharing

Universal serial bus power delivery (USB-PD) chargers are more attractive to consumers with multiple output ports. Existing multiple port charger designs take multi-stage approach thus increase power loss and charger size. Also, ports are normally designed with different power capability thus the high-power port becomes under-used if the connected device is fully charged while the other lower power ports cannot take over the unused power. This is mainly limited by the power architecture design. This paper addresses this issue by presenting a multiplexing based multi-port quasi-resonant flyback converter. The design achieves true power-sharing with high efficiency, small size, and simple analog implementation. This paper discusses the operating principle and design considerations. A GaN-based 60 W dual port charger verifies the proposed scheme while achieving 76% size reduction and 1% efficiency improvement than state-of-the-art.

Xue, Lincoln↗
DOE OSTI2021

Deep Symbolic Optimization for Electric Component Sizing in Fixed Topology Power Converters

Power converters (PC) are a major component in any current electronic hardware device. The development and design is usually guided by expert knowledge and heavily relies on human intuition and experience. The process is a very time consuming and costly activity and it is generally hard to improve upon current designs. As a first step towards autonomous PC design, we are here proposing a new framework for the sizing of components for fixed topology PCs based on given design requirements. To this end, we developed surrogate models for rapid evaluation of new topologies and adapt the deep symbolic optimization (DSO) framework to generate new topologies guided by a reinforcement learning training signal. In an empirical evaluation, we show that our DSO based approach is able to find the optimal configuration for all investigated topologies, while reducing the learning time by at least a factor of 100 compared to popular RL algorithms.

Xue, Lincoln↗
DOE OSTI2022

Method and system embodiments for converting ethanol to para-xylene and ortho-xylene

Disclosed herein are embodiments of a method and system for converting ethanol to para-xylene. The method also provides a pathway to produce terephthalic acid from biomass-based feedstocks. In some embodiments, the disclosed method produces p-xylene with high selectivity over other aromatics typically produced in the conversion of ethanol to xylenes, such as m-xylene, ethyl benzene, benzene, toluene, and the like. And, in some embodiments, the method facilitates the ability to use ortho/para mixtures of methylbenzyaldehyde for preparing ortho/para xylene product mixtures that are amendable to fractionation to separate the para- and ortho-xylene products thereby providing a pure feedstock of para-xylene that can be used to form terephthalic anhydride and a pure feedstock of ortho-xylene that can be used for other purposes, such as phthalic anhydride.

Ramasamy, Karthikeyan K.↗
DOE OSTI2022

Nonlinear hydrostatic control of a wave energy converter

Increased energy harvesting is realized using a nonlinear buoy geometry for reactive power generation. By exploiting the nonlinear dynamic coupling between the buoy geometry and the potential wideband frequency spectrum of incoming waves in the controller/buoy design, increased power can be captured in comparison to conventional wave energy converter designs. In particular, the reactive power and energy storage system requirements are inherently embedded in the nonlinear buoy geometry, therefore requiring only simple rate-feedback control.

Wilson, David G.↗
DOE OSTI2022

Process for converting alkanes to olefins

A process and apparatus for converting an alkane to an olefin. In one embodiment, the process involves oxidative coupling of an alkane, e.g., methane, with an oxidant, such as air, to produce an olefin having twice the number of carbon atoms as the alkane, e.g., ethylene. In another embodiment, the process involves oxidative dehydrogenation of an alkane, e.g., ethane, with an oxidant to form an olefin having the same number of carbon atoms as the alkane, e.g., ethylene. The process involves passing a flow of the oxidant from a first flow passage through a porous medium; diffusing a flow of the alkane from a second flow passage into the porous medium; and contacting the reactant alkane and the oxidant in the presence of a catalyst within the porous medium to produce the olefin.

Weissman, Jeffrey↗
DOE OSTI2022

Techno-Economic Implications of Electrical Machine Scaling for Wave Energy Converters: Preprint

The sizing of an electrical machine for a Wave Energy Converter (WEC) can have a substantial impact on the overall sizing, cost, and rating of the device. An electrical generator is typically part of the power take-off (PTO) system, which is the mechanism by which the energy absorbed by the prime mover is transformed into useable electrical. For practically all WECs, the rate of change of actuation is predominantly determined by the wave resource (i.e., the wave height and frequency) and devices will see a sinusoidally varying velocity according to the wave conditions. The same can then be said for both directly and indirectly coupled PTOs with electrical generators. This techno-economic study investigates electrical machine scaling and associated cost implications through core machine design theory, manufacturer data, supporting literature, and the DOE sponsored Reference Model Project (RMP). The RMP was a partnered effort to develop open-source marine energy (ME) point designs as reference models (RMs) to benchmark ME technology performance and costs, methods for design and analysis of ME technologies, estimations for capital costs, operational costs, and levelized costs of energy (LCOE). The results from this study show torque is directly related to (1) the physical size of the machine required to increase the airgap sheer stresses, (2) the amount of active material, (3) the support structure, (4) bearing size and rating, and (5) offshore cable rating, all of which have a significant effect on overall system costs in terms of both CAPEX and OPEX. This paper aims to be a critical benchmark in helping determine an “optimal” nameplate rating for wave energy devices and their associated PTO. With an optimized rating and sizing process, WEC costs can be reduced, and overall performance can be improved.

cables↗
DOE OSTI2022

Techno-Economic Implications of Electrical Machine Scaling for Wave Energy Converters

The sizing of an electrical machine for a Wave Energy Converter (WEC) can have a substantial impact on the overall sizing, cost, and rating of the device. An electrical generator is typically part of the power take-off (PTO) system, which is the mechanism by which the energy absorbed by the prime mover is transformed into useable electrical. For practically all WECs, the rate of change of actuation is predominantly determined by the wave resource (i.e., the wave height and frequency) and devices will see a sinusoidally varying velocity according to the wave conditions. The same can then be said for both directly and indirectly coupled PTOs with electrical generators. This techno-economic study investigates electrical machine scaling and associated cost implications through core machine design theory, manufacturer data, supporting literature, and the DOE sponsored Reference Model Project (RMP). The RMP was a partnered effort to develop open-source marine energy (ME) point designs as reference models (RMs) to benchmark ME technology performance and costs, methods for design and analysis of ME technologies, estimations for capital costs, operational costs, and levelized costs of energy (LCOE). The results from this study show torque is directly related to (1) the physical size of the machine required to increase the airgap sheer stresses, (2) the amount of active material, (3) the support structure, (4) bearing size and rating, and (5) offshore cable rating, all of which have a significant effect on overall system costs in terms of both CAPEX and OPEX. This paper aims to be a critical benchmark in helping determine an “optimal” nameplate rating for wave energy devices and their associated PTO. With an optimized rating and sizing process, WEC costs can be reduced, and overall performance can be improved.

cables↗
DOE OSTI2022

Progress on Machine Learning for the SNS High Voltage Converter Modulators

The High-Voltage Converter Modulators (HVCM) used to power the klystrons in the Spallation Neutron Source (SNS) linac were selected as one area to explore machine learning due to reliability issues in the past and the availability of large sets of archived waveforms. Progress in the past two years has resulted in generating a significant amount of simulated and measured data for training neural network models such as recurrent neural networks, convolutional neural networks, and variational autoencoders. Applications in anomaly detection, fault classification, and prognostics of capacitor degradation were pursued in collaboration with the Jefferson Laboratory, and early promising results were achieved. This paper will discuss the progress to date and present results from these efforts.

Pappas, Chris↗