Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “connections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Interfacial Connections between Organic Perovskite/n + Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

Abstract The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin‐film semiconductors has triggered interest in their use for direct solar‐driven water splitting to produce hydrogen. However, application of these low‐cost, electronic‐structure‐tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic‐catalyst‐electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n + silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high‐temperature annealing of the catalyst/TiO 2 ‐protected‐n + silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA 1‐x Cs x )PbI 3 system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro‐OMeTAD‐hole‐transport‐layer (HTL)‐based HOIP/n + Si solar cell, and a high photocurrent density of −15.9 mA cm −2 (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n + Si/Pt photocathode in 1 m NaOH under simulated 1‐sun illumination. While this thin‐film design creates stable interfaces, the intrinsic photo‐ and electro‐degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.

08 HYDROGEN↗
DOE OSTI2022

Metal–Organic Frameworks with Zero and Low‐Valent Metal Nodes Connected by Tetratopic Phosphine Ligands

Abstract Metal–organic frameworks (MOFs) constructed with M 0 nodes are attractive targets due to the reactivity of these low‐valent metals, but examples of these MOFs remain exceedingly rare. The rational design of three‐dimensional MOFs with Pd 0 and Pt 0 nodes using tetratopic phosphine ligands is reported. Five new MOFs have been synthesized by systematic variation of the phosphine ligands and metal precursors employed, and these represent the first examples of MOFs constructed using phosphine–metal bonds as the sole structural component. The MOFs display solid‐state luminescence, with emission maxima that are significantly red‐shifted compared to Pd(PPh 3 ) 4 . In addition, a Rh I low‐valent coordination solid based on the same linker design is reported, which displays solid‐state luminescence that is not observed for the molecular analogue.

Sikma, R. Eric↗
DOE OSTI2022

Metal–Organic Frameworks with Zero and Low–Valent Metal Nodes Connected by Tetratopic Phosphine Ligands

Metal–organic frameworks (MOFs) constructed with M 0 nodes are attractive targets due to the reactivity of these low-valent metals, but examples of these MOFs remain exceedingly rare. The rational design of three-dimensional MOFs with Pd 0 and Pt 0 nodes using tetratopic phosphine ligands is reported. Five new MOFs have been synthesized by systematic variation of the phosphine ligands and metal precursors employed, and these represent the first examples of MOFs constructed using phosphine–metal bonds as the sole structural component. Furthermore, the MOFs display solid-state luminescence, with emission maxima that are significantly red-shifted compared to Pd(PPh 3 ) 4 . In addition, a Rh I low-valent coordination solid based on the same linker design is reported, which displays solid-state luminescence that is not observed for the molecular analogue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Connecting research and teaching introductory cell and molecular biology using an Arabidopsis mutant screen

A complex research project was translated into a Course-based Undergraduate Research Experience (CURE), which was implemented in sections of an introductory Cell and Molecular Biology laboratory course. The research laboratory generated an engineered plant line producing a growth-inhibiting, lipid-derived plant hormone and mutagenized this line. Students in the CURE cultured the mutagenized plant population and selected and characterized suppressor mutants. They learned to observe phenotypes related to the biosynthesis and perception of the plant hormone and explored the genetic and biochemical basis of these phenotypes. As the students studied the relevant genetic, molecular and biochemical concepts during this CURE, they were able to translate this knowledge into practice and develop scientific arguments. This CURE was a successful collaboration between the teaching lab and the research lab. It benefited both parties as the students had a real-life, deep learning experience in scientific methodology, while the research lab gathered data and materials for further studies

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Increasing Ligand Denticity and Stability for a Water Oxidation Electrocatalyst using P(V) as Connecting Element

Carboxylate complexes have risen to prominence in the field of water oxidation catalysis. Here for the first time we use the higher valence of phosphinates [P(V)] relative to that of carboxylates [C(IV)] to increase ligand denticity. We describe the synthesis and characterization of a new dianionic pentadentate ligand, bcpq 2− that contains a tridentate 2,2’-bipyridine-6-carboxylato moiety, in addition to a 6’-phosphinato substituent that acts as fourth ligand and bears a side arm containing a quinoline, the fifth ligand. The new bcpq ligand allows formation of [Ru(II)(bcpq)(L)] (2 a–b, L=picoline or isoquinoline) and in preliminary results, of a Co(II) complex. NMR spectroscopy, X-ray diffraction, cyclic voltammetry, differential pulse and square wave voltammetry were used to characterize 2 a–b, with 2 b being characterized more extensively as a catalyst. Bulk electrolysis over 15 h at pH 7 was also used, showing that 2 b gave 100±5 % faradaic efficiency and remained completely homogeneous, whereas 1 b was no longer homogeneous; this comparison conclusively shows the advantage of the added denticity in the electrocatalytic context. Replacing carboxylate with P(V) phosphinate with an added arm may be used in other ligand systems to enhance the durability of homogeneous catalysts.

14 SOLAR ENERGY↗
DOE OSTI2022

Factorization connecting continuum & lattice TMDs

Transverse-momentum-dependent parton distribution functions (TMDs) can be studied from first principles by a perturbative matching onto lattice-calculable quantities: so-called lattice TMDs, which are a class of equal-time correlators that includes quasi-TMDs and TMDs in the Lorentz-invariant approach. We introduce a general correlator that includes as special cases these two Lattice TMDs and continuum TMDs, like the Collins scheme. Then, to facilitate the derivation of a factorization relation between lattice and continuum TMDs, we construct a new scheme, the Large Rapidity (LR) scheme, intermediate between the Collins and quasi-TMDs. The LR and Collins schemes differ only by an order of limits, and can be matched onto one another by a multiplicative kernel. We show that this same matching also holds between quasi and Collins TMDs, which enables us to prove a factorization relation between these quantities to all orders in α s . Our results imply that there is no mixing between various quark flavors or gluons when matching Collins and quasi TMDs, making the lattice calculation of individual flavors and gluon TMDs easier than anticipated. We cross-check these results explicitly at one loop and discuss implications for other physical-to-lattice scheme factorizations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

The connection between nonzero density and spontaneous symmetry breaking for interacting scalars

We consider U(1)-symmetric scalar quantum field theories at zero temperature. At nonzero charge densities, the ground state of these systems is usually assumed to be a superfluid phase, in which the global symmetry is spontaneously broken along with Lorentz boosts and time translations. We show that, in d > 2 spacetime dimensions, this expectation is always realized at one loop for arbitrary non-derivative interactions, confirming that the physically distinct phenomena of nonzero charge density and spontaneous symmetry breaking occur simultaneously in these systems. We quantify this result by deriving universal scaling relations for the symmetry breaking scale as a function of the charge density, at low and high density. Moreover, we show that the critical value of μ above which a nonzero density develops coincides with the pole mass in the unbroken, Poincaré invariant vacuum of the theory. The same conclusions hold non-perturbatively for an O(N) theory with quartic interactions in d = 3 and 4, at leading order in the 1/N expansion. We derive these results by computing analytically the zero-temperature, finite-μ one-loop effective potential, paying special attention to subtle points related to the iε terms. We check our results against the one-loop low-energy effective action for the superfluid phonons in λΦ 4 theory in d = 4 previously derived by Joyce and ourselves, which we further generalize to arbitrary potential interactions and arbitrary dimensions. As a byproduct, we find analytically the one-loop scaling dimension of the lightest charge-n operator for the λΦ 6 conformal superfluid in d = 3, at leading order in 1/n, reproducing a numerical result of Badel et al. For a λΦ 4 superfluid in d = 4, we also reproduce the Lee-Huang-Yang relation and compute relativistic corrections to it. Finally, we discuss possible extensions of our results beyond perturbation theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Quantitative analysis of Raman spectral parameters for carbon fibers: practical considerations and connection to mechanical properties

Although the literature on the Raman spectra of carbon fibers is vast, no consistent, robust predictive relationship between mechanical properties of carbon fibers and spectral parameters exists. This shortcoming is due to the use of numerous fitting functions to evaluate Raman spectra of carbon fibers and the inconsistencies in establishing the best fitting models in a statistically robust fashion. To address this gap, we present a comprehensive work on the Raman spectra of carbon fibers that combines a vast library of experimental data with a robust numerical analysis and a statistical evaluation of a wide range of suggested fitting models. This manuscript begins with a brief review of the commonly applied fitting models. Then, the Raman spectra of 32 commercially available polyacrylonitrile-based carbon fibers collected at excitation wavelengths 532, 633, and 785 nm are presented and the best fit for all fibers is evaluated based on several statistical criteria in conjunction with numerical calculations and physical arguments. The results suggest that high-performance fibers must be fit with at least five peaks, whereas high-tensile modulus fibers are best fit with at least six distinct peaks. Finally, we employ simultaneous fitting of the Raman spectra of specific fibers and wavelengths and demonstrate that strong correlations exist between mechanical properties and the D1 peak position and shape across the range of evaluated mechanical properties. Finally, we suggest straightforward improvements in fitting analysis procedures that can be implemented to increase coherency in the understanding of the underlying carbon fiber microstructure intuited from Raman spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Towards gradient multimaterial toolpath generation for direct ink writing with connected fermat spirals

This work describes advances towards a reproducible, parametrically defined algorithm for generating graded multimaterial toolpaths for direct ink writing. Expanding on the existing Fermat space-filling algorithm and coupling with image-driven processing techniques, we demonstrate the fabrication of multimaterial structures. Here, material composition is encoded within toolpaths by parsing hue values from a multi-colored image. By performing dynamic velocity compensation based on local curvature and Euclidean distance filtering, internal voids are mitigated while optimizing print fidelity. Here, the work opens new avenues for designing complex toolpaths with locally programmable composition.

3D Printing↗