Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computational studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Computation of convective flow with gravity modulation in rectangular cavities

In this work, a computational study is presented for the investigation of gravity modulation (g-jitter) effects in thermally driven cavity flows at terrestrial and microgravity environments. The two-dimensional, time-dependent Navier-Stokes equations are numerically integrated by a time-split method using direct matrix solvers. Computations at terrestrial gravity are utilized to assess the effects of adiabatic side-wall boundary conditions as well as the full nonlinearity of the governing equations on the sinusoidally forced Benard problem studied by Gresho and Sani. The low-g calculations focus on the establishment of critical frequency ranges and consider the effects of modulation direction and randomness. The applicability of linear analysis in the excitable frequency range at low g is also discussed.

Biringen, S.↗

CFD Assessment of Aerodynamic Degradation of a Subsonic Transport Due to Airframe Damage

A computational study is presented to assess the utility of two NASA unstructured Navier-Stokes flow solvers for capturing the degradation in static stability and aerodynamic performance of a NASA General Transport Model (GTM) due to airframe damage. The approach is to correlate computational results with a substantial subset of experimental data for the GTM undergoing progressive losses to the wing, vertical tail, and horizontal tail components. The ultimate goal is to advance the probability of inserting computational data into the creation of advanced flight simulation models of damaged subsonic aircraft in order to improve pilot training. Results presented in this paper demonstrate good correlations with slope-derived quantities, such as pitch static margin and static directional stability, and incremental rolling moment due to wing damage. This study further demonstrates that high fidelity Navier-Stokes flow solvers could augment flight simulation models with additional aerodynamic data for various airframe damage scenarios.

Frink, Neal T.↗

Analysis of Aerothermal Heating Over Reusable Single-Stage to Orbit Vehicles

Using the General Aerodynamic Simulation Program (GASP) with finite-rate surface catalysis and radiative equilibrium surface temperature conditions, a computational study has been conducted to predict three-dimensional aero-convective heating over the proposed reusable single-stage to orbit vehicles. The solutions for three basic classes of usable single-stage-to-orbit vehicles, including wing body, lifting body and vertical lander, are presented and compared to provide information for vehicle design. The free stream conditions used in this study occur at an altitude of 57.5 km, ambient density of 4.129e-4 kg/cubic m, and velocity of 4,849 m/s. The convective heating over the vehicle surface in both laminar and turbulent flow regimes were computed. The Baldwin-Lomax algebraic model with a modified van Driest damping factor was applied in the turbulent flow calculations. A bifurcation model which guarantees the conservation of mass diffusive fluxes was adopted to account for the multi-species mass diffusion. The effects of turbulence and surface catalysis on the surface heating are discussed in detail The solutions indicate the degree of oxygen dissociation over the leeward side is sensitive to the shape of vehicle body. Predicted convective heating over the entire surface of lifting body is strongly affected by the presence of surface catalysis. For wing body and vertical lander, the surface catalysis effect does not appear to be important in the far downstream region, and turbulence is the dominant effect on the heating prediction in this region.

Chen, Y. K.↗

Streamline‐Traced, External‐Compression Supersonic Inlets for Mach 2

A computational study was performed to explore the aerodynamic design and performance of streamline-traced, external‐compression (STEX) inlets for Mach 2.0. The performance metrics included inlet flow rates, total pressure recovery, and total pressure distortion. The study explored the use of round and flattened capture cross‐sections and a bleed slot. The design of the inlet and generation of the inlet geometry was performed using the Supersonic Inlet Design and Analysis (SUPIN) Tool. Computational grids were generated, and methods of computational fluid dynamics (CFD) were applied to solve the three dimensional, turbulent flow through the inlets using the Wind‐US CFD flow solver. It was found that the use of a bleed slot with about 5% bleed resulted in an inlet total pressure recovery of 95% at Mach 2 with acceptable radial and circumferential total pressure distortion. It was also found that there was only a slight decrease in performance between a round and flattened capture cross‐section. This suggests that the use of streamline tracing offers flexibility in shaping the inlet capture cross‐section for a more favorable integration with an aircraft wing or fuselage. This flexibility and the good performance of the inlet provides a novel inlet design for future commercial supersonic aircraft.

Computational Fluid Dynamics↗

Accelerated convergence for incompressible flow calculations

Two improved algorithms which solve the steady-state Navier-Stokes equations, PISO and SIMPLER, are studied. Computations were carried out on progressively finer grids for the driven cavity and flow over a backward-facing step. The effects of relaxation factor, number of grid nodes and number of sweeps through the pressure equations are studied to evaluate the performance of the PISO and SIMPLER schemes. Results show that these improved schemes accelerate the convergence rate of the solution generally by a factor of two as compared to the SIMPLE method.

Neely, G. M.↗

Accelerated convergence for incompressible flow calculations

Two improved algorithms which solve the steady-state Navier-Stokes equations, PISO and SIMPLER, are studied. Computations were carried out on progressively finer grids for the driven cavity and flow over a backward-facing step. The effects of relaxation factor, number of grid nodes and number of sweeps through the pressure equations are studied to evaluate the performance of the PISO and SIMPLER schemes. Results show that these improved schemes accelerate the convergence rate of the solution generally by a factor of two as compared to the SIMPLE method.

Neely, G. M.↗

Streamline-Traced, External-Compression Supersonic Inlets for Mach 2

A computational study was performed to explore the aerodynamic design and performance of streamline-traced, external-compression (STEX) inlets for Mach 2.0. The performance metrics included inlet flow rates, total pressure recovery, and total pressure distortion. The study explored the use of round and flattened capture cross-sections and a bleed slot. The design of the inlet and generation of the inlet geometry was performed using the Supersonic Inlet Design and Analysis(SUPIN) Tool. Computational grids were generated, and methods of computational fluid dynamics (CFD) were applied to solve the three-dimensional, turbulent flow through the inlets using the Wind-US CFD flow solver. It was found that the use of a bleed slot with about 5% bleed resulted in an inlet total pressure recovery of 95% at Mach 2 with acceptable radial and circumferential total pressure distortion. It was also found that there was only a slight decrease in performance between a round and flattened capture cross-section. This suggests that the use of streamline tracing offers flexibility in shaping the inlet capture cross-section for a more favorable integration with an aircraft wing or fuselage. This flexibility and the good performance of the inlet provides a novel inlet design for future commercial supersonic aircraft.

Computational Fluid Dynamics↗

A study of jet impingement on curved surfaces followed by oblique introduction into a freestream flow

An experimental investigation of the temperature and velocity fields generated by a two-dimensional transverse jet was conducted. An approximate analysis of a deflected radial plane jet was developed. An analytical model of aircraft ingestion was extended to include computation of the inlet flow field. An investigation of the use of flaps as thrust reversers was initiated. Analyses of the impingement of a round incompressible and a round compressible jet on a arbitrary axisymmetric surface were completed. A computer study of the effects on performance of thrust reverser geometry was completed and the results compared with existing data. An experimental investigation of three-dimensional jet impingement on nonplane surfaces was also initiated.

Tatom, J. W.↗

Flow interaction experiment. Volume 1: Aerothermal modeling, phase 2

An experimental and computational study is reported for the flow of a turbulent jet discharging into a rectangular enclosure. The experimental configurations consisting of primary jets only, annular jets only, and a combination of annular and primary jets are investigated to provide a better understanding of the flow field in an annular combustor. A laser Doppler velocimeter is used to measure mean velocity and Reynolds stress components. Major features of the flow field include recirculation, primary and annular jet interaction, and high turbulence. A significant result from this study is the effect the primary jets have on the flow field. The primary jets are seen to create statistically larger recirculation zones and higher turbulence levels. In addition, a technique called marker nephelometry is used to provide mean concentration values in the model combustor. Computations are performed using three levels of turbulence closures, namely k-epsilon model, algebraic second moment (ASM), and differential second moment (DSM) closure. Two different numerical schemes are applied. One is the lower-order power-law differencing scheme (PLDS) and the other is the higher-order flux-spline differencing scheme (FSDS). A comparison is made of the performance of these schemes. The numerical results are compared with experimental data. For the cases considered in this study, the FSDS is more accurate than the PLDS. For a prescribed accuracy, the flux-spline scheme requires a far fewer number of grid points. Thus, it has the potential for providing a numerical error-free solution, especially for three-dimensional flows, without requiring an excessively fine grid. Although qualitatively good comparison with data was obtained, the deficiencies regarding the modeled dissipation rate (epsilon) equation, pressure-strain correlation model, and the inlet epsilon profile and other critical closure issues need to be resolved before one can achieve the degree of accuracy required to analytically design combustion systems.

Nikjooy, M.↗

Flow interaction experiment. Volume 2: Aerothermal modeling, phase 2

An experimental and computational study is reported for the flow of a turbulent jet discharging into a rectangular enclosure. The experimental configurations consisting of primary jets only, annular jets only, and a combination of annular and primary jets are investigated to provide a better understanding of the flow field in an annular combustor. A laser Doppler velocimeter is used to measure mean velocity and Reynolds stress components. Major features of the flow field include recirculation, primary and annular jet interaction, and high turbulence. A significant result from this study is the effect the primary jets have on the flow field. The primary jets are seen to create statistically larger recirculation zones and higher turbulence levels. In addition, a technique called marker nephelometry is used to provide mean concentration values in the model combustor. Computations are performed using three levels of turbulence closures, namely k-epsilon model, algebraic second moment (ASM), and differential second moment (DSM) closure. Two different numerical schemes are applied. One is the lower-order power-law differencing scheme (PLDS) and the other is the higher-order flux-spline differencing scheme (FSDS). A comparison is made of the performance of these schemes. The numerical results are compared with experimental data. For the cases considered in this study, the FSDS is more accurate than the PLDS. For a prescribed accuracy, the flux-spline scheme requires a far fewer number of grid points. Thus, it has the potential for providing a numerical error-free solution, especially for three-dimensional flows, without requiring an excessively fine grid. Although qualitatively good comparison with data was obtained, the deficiencies regarding the modeled dissipation rate (epsilon) equation, pressure-strain correlation model, and the inlet epsilon profile and other critical closure issues need to be resolved before one can achieve the degree of accuracy required to analytically design combustion systems.

Nikjooy, M.↗

Aerothermodynamic Measurements of Hypersonic Non-Equilibrium Flows

High enthalpy arc-jets are unique facilities particularly suited for producing complex flows in the aerospace field, such as the aerothermodynamics of a re-entry vehicle. Arc-jets are often used to evaluate important design factors that include heat shield materials and vehicle design. Characterization of these facilities is important, as studies often aim to match specific in-flight environments during experiments. Due to the complex environment produced by an arc-jet, with effects such as thermodynamic and chemical non-equilibrium occurring in the flow, characterization experiments are significantly more difficult than in conventional blow-down wind tunnels. The current work aims to characterize an arc-jet facility through spatially-resolved measurements of flow unsteadiness, temperature, and velocity. To achieve this goal, a non-intrusive imaging technique called “planar laser-induced fluorescence” was performed in the NASA Langley Hypersonic Materials Environmental Test System arc-jet facility. The experimental data was analysed to produce the quantitative measurements in multiple regions of the flow around a blunt body specimen. A three-temperature low fidelity numerical solver was created to simulate the flow in order to investigate thermal non-equilibrium effects occurring outside the imaging region in the arc-jet nozzle. Unsteadiness in the test section of the arc-jet was minimized by analyzing a subset of data assessing the gas injection configuration. Radial velocity, rotational temperature and translational temperature measurements are provided that can be used to validate future computational studies. The temperature measurements revealed rotational non-equilibrium occurring behind the bow-shock near the specimen surface. Computational results show the facility is capable of producing thermal non-equilibrium flow in the arc-jet nozzle. This work provides the first experimental and computational evidence of thermal trans-rotational non-equilibrium occurring in multiple regions of this arc-jet facility. Significant improvements to the methodology are also identified as recommendations for future arc-jet characterization studies.

Laser induced fluorescence↗

Aerodynamic Influence of a Slat on a Flapped Wing

Three high-lift configurations were computationally studied to assess the aerodynamic influence of slats. A flapped wing was simulated with no slat, a full-span slat, and a three quarter-span slat at a chord based Reynolds number of 3.7 million. The flows were computed using a compressible Navier-Stokes solver on structured grids with the Spalart-Allmaras turbulence model. All cases were compared with experimental data to validate the approach. The slats not only increase the lift generated by the wing but alter the topology of the flowfield considerably. The changes in the flow give insight into the working of a slat and contribute to a better understanding of high-lift flows in general.

Mathias, Donovan L.↗

Towards Co-evolution of Membrane Transport and Metabolism

Protocellular boundaries were inextricably connected to the metabolism they encapsulated: to be inheritable, early metabolism must have led to an increased rate of growth and division of vesicles and, similarly, transport through vesicle boundaries must have supported the evolution of metabolism. Even though explaining how this coupling emerged and evolved in the absence of the complex machinery of modern cells is one of the key issues in studies on the origin of life, little is known about the biochemical and biophysical processes that might have been involved. This gap in our knowledge is a major impediment in efforts to construct scenarios for the origin of life and laboratory models of protocells. A combination of experimental and computational studies carried out by us and our collaborators is aimed at helping to close this gap. Properties of membranes might have contributed to the selection of RNA as an early biopolymer. A kinetic mechanism was proposed (Sacerdote & Szostak, 2005) in which ribose was supplied more quickly than other aldopentoses to primordial cells for preferential incorporation of ribonucleotides into nucleic acids. This proposal is based on a finding that ribose permeates membranes an order of magnitude faster than its diastereomers, arabinose and xylose. Our computer simulations, which yield permeation rates in excellent agreement with experiment, and kinetic modeling explain this phenomenon in terms of inter- and intramolecular interactions involving exocyclic hydroxyl groups attached to carbon atoms of the pyranose ring (Wei and Pohorille, 2009). They also constrain scenarios for the formation of the earliest nucleic acids (Wei and Pohorille, 2013). In one scenario, sugars permeate protocellular walls and subsequently are used to synthesize nucleic acids inside protocells. As long as this process proceeds at the rate faster than 6x10(exp -3)/s, ribose derivatives will be available for synthesis easier than their diastereomers. If nucleosides or their activated derivatives are synthesized outside protocells and subsequently transported across protocellular membranes the kinetic mechanism does not apply because all diastereomers, which have their sugars in the furanose rather than pyranose form, permeate the membrane at approximately the same rate. Properties of membranes might have been also coupled to metabolism involving peptides. Recently, Adamala and Szostak (2013) have shown that a dipeptide inside fatty-acid vesicles catalyzes the formation of another dipeptide that binds to vesicle walls and, by doing so, promotes their growth at the expense of other vesicles. This coupling of metabolism, permeability of vesicles and their growth is the first demonstration of evolutionary advantage imparted by small, membrane-bound peptides. Building on this work we have calculated the rate at which different blocked amino acids are delivered to a protocell for synthesis of dipeptides. We have further shown that the dipeptides are located at the water-membrane interface rather than in the center of the bilayer. On these basis it is anticipated that other dipeptides containing aromatic, but not necessarily hydrophobic amino acids (e.g. tyrosine) could have the same catalytic effects. Insight from these studies allows for estimating the rate of vesicle growth and the rates of dipeptide synthesis required to keep the system in balance. These results, in combination with our earlier studies, lead to a general scenario for evolution from membrane-bound dipeptides to ion channels in the origin of life.

Metabolism↗

Development of a hydraulic model of the human systemic circulation

Physical and numeric models of the human circulation are constructed for a number of objectives, including studies and training in physiologic control, interpretation of clinical observations, and testing of prosthetic cardiovascular devices. For many of these purposes it is important to quantitatively validate the dynamic response of the models in terms of the input impedance (Z = oscillatory pressure/oscillatory flow). To address this need, the authors developed an improved physical model. Using a computer study, the authors first identified the configuration of lumped parameter elements in a model of the systemic circulation; the result was a good match with human aortic input impedance with a minimum number of elements. Design, construction, and testing of a hydraulic model analogous to the computer model followed. Numeric results showed that a three element model with two resistors and one compliance produced reasonable matching without undue complication. The subsequent analogous hydraulic model included adjustable resistors incorporating a sliding plate to vary the flow area through a porous material and an adjustable compliance consisting of a variable-volume air chamber. The response of the hydraulic model compared favorably with other circulation models.

NASA Program Biomedical Research and Countermeasur↗

Supercritical flow about a thick circular-arc airfoil

The supercritical flow about a biconvex circular-arc airfoil is being thoroughly documented at Ames Research Center in order to provide experimental test cases suitable for guiding and evaluating current and future computer codes. The effects of angle of attack, effects of leading and trailing-edge splitter plates, additional unsteady pressure fluctuation (buffeting) measurements and glow-field shadowgraphs, and application of an oil-film technique to display separated-wake streamlines were studied. Computed and measured pressure distributions for steady and unsteady flows, using a recent computer code representative of current methodology, are compared. It was found that the numerical solutions are often fundamentally incorrect in that only strong (shock-polar terminology) shocks are captured, whereas experimentally, both strong and weak shock waves appear.

Mcdevitt, J. B.↗

Reynolds Number Effects on Leading Edge Radius Variations of a Supersonic Transport at Transonic Conditions

A computational study focused on leading-edge radius effects and associated Reynolds number sensitivity for a High Speed Civil Transport configuration at transonic conditions was conducted as part of NASA's High Speed Research Program. The primary purposes were to assess the capabilities of computational fluid dynamics to predict Reynolds number effects for a range of leading-edge radius distributions on a second-generation supersonic transport configuration, and to evaluate the potential performance benefits of each at the transonic cruise condition. Five leading-edge radius distributions are described, and the potential performance benefit including the Reynolds number sensitivity for each is presented. Computational results for two leading-edge radius distributions are compared with experimental results acquired in the National Transonic Facility over a broad Reynolds number range.

Rivers, S. M. B.↗

An Experimental and Numerical Study of Icing Effects on the Performance and Controllability of a Twin Engine Aircraft

In September 1997 the National Transportation Safety Board (NTSB) requested assistance from the NASA Lewis Research Center (LeRC) Icing Branch in the investigation of an aircraft accident that was suspected of being caused by ice contamination. In response to the request NASA agreed to perform an experimental and computational study. The main activities that NASA performed were LERC Icing Research Tunnel (IRT) testing to define ice shapes and 2-D Navier-Stokes analysis to determine the performance degradation that those ice shapes would have caused. An IRT test was conducted in January 1998. Most conditions for the test were based upon raw and derived data from the Flight Data Recorder (FDR) recovered from the accident and upon the current understanding of the Meteorological conditions near the accident. Using a two-dimensional Navier-Stokes code, the flow field and resultant lift and drag were calculated for the wing section with various ice shapes accreted in the IRT test. Before the final calculations could be performed extensive examinations of geometry smoothing and turbulence were conducted. The most significant finding of this effort is that several of the five-minute ice accretions generated in the IRT were found by the Navier-Stokes analysis to produce severe lift and drag degradation. The information generated by this study suggests a possible scenario for the kind of control upset recorded in the accident. Secondary findings were that the ice shapes accreted in the IRT were mostly limited to the protected pneumatic boot region of the wing and that during testing, activation of the pneumatic boots cleared most of the ice.

Reehorst, A.↗

Estimation of unsteady lift on a pitching airfoil from wake velocity surveys

The results of a joint experimental and computational study on the flowfield over a periodically pitched NACA0012 airfoil, and the resultant lift variation, are reported in this paper. The lift variation over a cycle of oscillation, and hence the lift hysteresis loop, is estimated from the velocity distribution in the wake measured or computed for successive phases of the cycle. Experimentally, the estimated lift hysteresis loops are compared with available data from the literature as well as with limited force balance measurements. Computationally, the estimated lift variations are compared with the corresponding variation obtained from the surface pressure distribution. Four analytical formulations for the lift estimation from wake surveys are considered and relative successes of the four are discussed.

Zaman, K. B. M. Q.↗