Mechanical properties of epoxy resins and glass/epoxy composites at cryogenic temperatures.
Cryogenic mechanical properties of epoxy resins and glass/epoxy composites
Molho, R.↗
SEARCH · Engineering Papers
Results for “compositional properties”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Prediction of Material Properties of Nanostructured Polymer Composites Using Atomistic Simulations
Atomistic models of epoxy polymers were built in order to assess the effect of structure at the nanometer scale on the resulting bulk properties such as elastic modulus and thermal conductivity. Atomistic models of both bulk polymer and carbon nanotube polymer composites were built. For the bulk models, the effect of moisture content and temperature on the resulting elastic constants was calculated. A relatively consistent decrease in modulus was seen with increasing temperature. The dependence of modulus on moisture content was less consistent. This behavior was seen for two different epoxy systems, one containing a difunctional epoxy molecule and the other a tetrafunctional epoxy molecule. Both epoxy structures were crosslinked with diamine curing agents. Multifunctional properties were calculated with the nanocomposite models. Molecular dynamics simulation was used to estimate the interfacial thermal (Kapitza) resistance between the carbon nanotube and the surrounding epoxy matrix. These estimated values were used in a multiscale model in order to predict the thermal conductivity of a nanocomposite as a function of the nanometer scaled molecular structure.
Hinkley, J.A.↗
An investigation of the temperature dependence of the ultrasonic properties of AS4/lexan and XAS/lexan composites
An investigation of the temperature dependence of the ultrasonic properties of AS4/lexan and XAS/lexan composites is summarized. In particular, a technique for determination of velocity and attenuation as a function of temperature, for both the matrix and composite materials is determined. The separation of contributions of the matrix and fiber to ultrasonic propagation and scattering is discussed. Work begun on the characterization of wave propagation in graphite fiber/polymer matrix composites is described.
Smith, B. T.↗
Ablative and insulating properties of outgassed boron nitride and boron nitride composite
Ablative and insulating properties of outgassed boron nitride and boron nitride-phenolic resin composite
ABLATION↗
Effects of Endcaps on the Properties of Polyimide/Carbon Fiber Composites
Carbon fiber (T650-35) composites were fabricated from polyimide resins, using 4,4'-(hexafluoroisopropylidene) diphthalic acid, dimethyl esters (HFDE) and p-phenylenediamine (p-PDA) with three different endcaps; namely, nadic ester (NE), p-aminostyrene (p-AS) and 4-phenylethynylphthalic acid, methyl ester. The curing chemistry of these endcaps will be reviewed. The thermo-oxidative stability as well as the physical and mechanical properties of these polyimide/carbon fiber composites will be discussed.
Chuang, Kathy C.↗
Predicting Properties of Unidirectional-Nanofiber Composites
A theory for predicting mechanical, thermal, electrical, and other properties of unidirectional-nanofiber/matrix composite materials is based on the prior theory of micromechanics of composite materials. In the development of the present theory, the prior theory of micromechanics was extended, through progressive substructuring, to the level of detail of a nanoscale slice of a nanofiber. All the governing equations were then formulated at this level. The substructuring and the equations have been programmed in the ICAN/JAVA computer code, which was reported in "ICAN/JAVA: Integrated Composite Analyzer Recoded in Java" (LEW-17247), NASA Tech Briefs, Vol. 26, No. 12 (December 2002), page 36. In a demonstration, the theory as embodied in the computer code was applied to a graphite-nanofiber/epoxy laminate and used to predict 25 properties. Most of the properties were found to be distributed along the through-the-thickness direction. Matrix-dependent properties were found to have bimodal through-the-thickness distributions with discontinuous changes from mode to mode.
Chamis, Christos C.↗
Experimental Tests to Characterize the Behavior and Properties of IM7-8552 Composite
This document summarizes the test procedures for characterizing the quasi-static (QS), room temperature (RT) behavior of IM7/8552 unidirectional composite material. All testing reported in this document follow applicable ASTM1 test standards as closely as possible, with any deviations reported. The overall objective is to develop a framework for the creation of MAT213 material input for use in the LS-DYNA program (LSTC, 2016). Details of the MAT213 material model and its implementation are available publicly (Goldberg et al., 2015; Harrington et al., 2016; Hoffarth et al., 2016). However, the measured properties can be utilized by most composite impact models.
Mechanical Properties↗
Process-Parameter-Dependent Optical and Structural Properties of ZrO2MgO Mixed-Composite Films Evaporated from the solid Solution
The process-parameter-dependent optical and structural properties of ZrO2MgO mixed-composite material have been investigated. Optical properties were derived from spectrophotometric measurements. By use of atomic force microscopy, x-ray diffraction analysis, and energy-dispersive x-ray (EDX) analysis, the surface morphology, grain size distributions, crystallographic phases, and process-dependent material composition of films have been investigated. EDX analysis made evident the correlation between the oxygen enrichment in the films prepared at a high level of oxygen pressure and the very low refractive index. Since oxygen pressure can be dynamically varied during a deposition process, coatings constructed of suitable mixed-composite thin films can benefit from continuous modulation of the index of refraction. A step modulation approach is used to develop various multilayer-equivalent thin-film devices.
Sahoo, N. K.↗
Mechanical properties of neat polymer matrix materials and their unidirectional carbon fiber-reinforced composites
The mechanical properties of two neat resin systems for use in carbon fiber epoxy composites were characterized. This included tensile and shear stiffness and strengths, coefficients of thermal and moisture expansion, and fracture toughness. Tests were conducted on specimens in the dry and moisture-saturated states, at temperatures of 23, 82 and 121 C. The neat resins tested were American Cyanamid 1806 and Union Carbide ERX-4901B(MPDA). Results were compared to previously tested neat resins. Four unidirectional carbon fiber reinforced composites were mechanically characterized. Axial and transverse tension and in-plane shear strengths and stiffness were measured, as well as transverse coefficients of thermal and moisture expansion. Tests were conducted on dry specimens only at 23 and 100 C. The materials tested were AS4/3502, AS6/5245-C, T300/BP907, and C6000/1806 unidirectional composites. Scanning electron microscopic examination of fracture surfaces was performed to permit the correlation of observed failure modes with the environmental test conditions.
Zimmerman, Richard S.↗
Al Metal Matrix Composites and Their Tribological Properties for NASA Space Exploration
Explore the source record for details and available documents.
Metal Matrix Composites↗
Thermal conductivity, electrical conductivity and specific heat of copper-carbon fiber composite
We have developed a new copper-carbon fiber composite which possesses properties of copper, i.e., excellent thermal and electrical conductivities, in combination with a property of carbon fiber, i.e., a small thermal expansion coefficient. The composite properties can be controlled by the amount, type and orientation of the carbon fibers they contain. Therefore, this composite is considered to be useful as an electrical material. The effects of volume and arrangement of fibers on the thermal conductivity, electrical conductivity and specific heat of the composite were studied. The results obtained were as follows: (1) The thermal and electrical conductivities of the composite became smaller as the volume of carbon fibers increased, and they were also influenced by the fiber arrangement. (2) The above conductivities could be calculated by careful application of the “rule of mixtures” for composites. (3) The specific heat of the composite was dependent not on the fiber arrangement but on the fiber volume. (4) In thermal fatigue tests, no degradation in electrical conductivity was observed.
Keiichi Kuniya↗
Effect of fiber reinforcements on thermo-oxidative stability and mechanical properties of polymer matrix composites
A number of studies have investigated the thermo-oxidative behavior of polymer matrix composites. Two significant observations have been made from these research efforts: (1) fiber reinforcement has a significant effect on composite thermal stability; and (2) geometric effects must be considered when evaluating thermal aging data. A compilation of some results from these studies is presented, and this information shows the influence of the reinforcement fibers on the oxidative degradation of various polymer matrix composites. The polyimide PMR-15 was the matrix material that was used in these studies. The control composite material was reinforced with Celion 6000 graphite fiber. T-40R graphite fibers, along with some very stable ceramic fibers were selected as reinforcing fibers because of their high thermal stability. The ceramic fibers were Nicalon (silicon carbide) and Nextel 312 (alumina-silica-boron oxide). The mechanical properties of the two graphite fiber composites were significantly different, probably owing to variations in interfacial bonding between the fibers and the polyimide matrix. The Celion 6000/PMR-15 bond is very tight but the T-40/PMR-15 bond is less tight. Three oxidation mechanisms were observed: (1) the preferential oxidation of the Celion 6000 fiber ends at cut surfaces, leaving a surface of matrix material with holes where the fiber ends were originally situated; (2) preferential oxidation of the composite matrix; and (3) interfacial degradation by oxidation. The latter two mechanisms were also observed on fiber end cut surfaces. The fiber and interface attacks appeared to initiate interfiber cracking along these surfaces.
Bowles, Kenneth J.↗
Effect of fiber reinforcement on thermo-oxidative stability and mechanical properties of polymer matrix composites
A number of studies have investigated the thermooxidative behavior of polymer matrix composites. Two significant observations have been made from these research efforts: (1) fiber reinforcement has a significant effect on composite thermal stability; and (2) geometric effects must be considered when evaluating thermal aging data. The polyimide PMR-15 was the matrix material used in these studies. The control composite material was reinforced with Celion 6000 graphite fiber. T-4OR graphite fibers, along with some very stable ceramic fibers were selected as reinforcing fibers because of their high thermal stability. The ceramic fibers were Nicalon (silicon carbide) and Nextel 312 (alumina-silica-boron oxide). The mechanical properties of the two graphite fiber composites were significantly different, probably owing to variations in interfacial bonding between the fibers and the polyimide matrix. Three oxidation mechanisms were observed: (1) the preferential oxidation of the Celion 6000 fiber ends at cut surfaces, leaving a surface of matrix material with holes where the fiber ends were originally situated; (2) preferential oxidation of the composite matrix; and (3) interfacial degradation by oxidation. The latter two mechanisms were also observed on fiber end cut surfaces. The fiber and interface attacks appeared to initiate interfiber cracking along these surfaces.
Bowles, K. J.↗
Mechanical property characterization of intraply hybrid composites
An investigation was conducted to characterize the mechanical properties of intraply hybrids made from graphite fiber/epoxy matrix (primary composites) hybridized with varying amounts of secondary composites made from S-glass or Kevlar 49 fibers. The tests were conducted using thin laminates having the same thickness. The specimens for these tests were instrumented with strain gages to determine stress-strain behavior. Significant results are included.
Chamis, C. C.↗
Ceramic Composite Intermediate Temperature Stress-Rupture Properties Improved Significantly
Silicon carbide (SiC) composites are considered to be potential materials for future aircraft engine parts such as combustor liners. It is envisioned that on the hot side (inner surface) of the combustor liner, composites will have to withstand temperatures in excess of 1200 C for thousands of hours in oxidizing environments. This is a severe condition; however, an equally severe, if not more detrimental, condition exists on the cold side (outer surface) of the combustor liner. Here, the temperatures are expected to be on the order of 800 to 1000 C under high tensile stress because of thermal gradients and attachment of the combustor liner to the engine frame (the hot side will be under compressive stress, a less severe stress-state for ceramics). Since these composites are not oxides, they oxidize. The worst form of oxidation for strength reduction occurs at these intermediate temperatures, where the boron nitride (BN) interphase oxidizes first, which causes the formation of a glass layer that strongly bonds the fibers to the matrix. When the fibers strongly bond to the matrix or to one another, the composite loses toughness and strength and becomes brittle. To increase the intermediate temperature stress-rupture properties, researchers must modify the BN interphase. With the support of the Ultra-Efficient Engine Technology (UEET) Program, significant improvements were made as state-of-the-art SiC/SiC composites were developed during the Enabling Propulsion Materials (EPM) program. Three approaches were found to improve the intermediate-temperature stress-rupture properties: fiber-spreading, high-temperature silicon- (Si) doped boron nitride (BN), and outside-debonding BN.
Morscher, Gregory N.↗
Composite structural materials
Transverse properties of fiber constituents in composites, fatigue in composite materials, matrix dominated properties of high performance composites, numerical investigation of moisture effects, numerical investigation of the micromechanics of composite fracture, advanced analysis methods, compact lug design, and the RP-1 and RP-2 sailplanes projects are discussed.
Ansell, G. S.↗
Probabilistic sizing of laminates with uncertainties
A reliability based design methodology for laminate sizing and configuration for a special case of composite structures is described. The methodology combines probabilistic composite mechanics with probabilistic structural analysis. The uncertainties of constituent materials (fiber and matrix) to predict macroscopic behavior are simulated using probabilistic theory. Uncertainties in the degradation of composite material properties are included in this design methodology. A multi-factor interaction equation is used to evaluate load and environment dependent degradation of the composite material properties at the micromechanics level. The methodology is integrated into a computer code IPACS (Integrated Probabilistic Assessment of Composite Structures). Versatility of this design approach is demonstrated by performing a multi-level probabilistic analysis to size the laminates for design structural reliability of random type structures. The results show that laminate configurations can be selected to improve the structural reliability from three failures in 1000, to no failures in one million. Results also show that the laminates with the highest reliability are the least sensitive to the loading conditions.
Shah, A. R.↗
Effect of Synergistic Space Effects on Properties of Novel Polymer Composite Materials (PCM)
Evaluate the long-term performance of composite materials in space by exposing them to the actual space environment and analyzing changes in their interfacial properties, using the International Space Station (ISS) and the MISSE for experimentation. This research could assist in the design of future spacecraft, assessing risk and enhancing safety and reliability of spacecraft structural materials for space exploration.
R Vaidyanathan↗