Results for “building data” — Page 26

NASA NTRS2018

The Mars Reconnaissance Orbiter Mission: 2018 Status

The Mars Reconnaissance Orbiter (MRO) continues its dual-mode mission of scientific exploration and programmatic support. Now in its 13th year of flight (and its 12th year in its low-altitude, sun-synchronous orbit around Mars), the spacecraft continues in its normal flight mode and its science instruments continue to acquire a treasure trove of data which is being used to study the Martian environment (surface, sub-surface, and atmosphere). To date (July 2018), more than 333 TB of scientific data have been returned to Earth. Building onto the 2017 IAC paper: “The Mars Reconnaissance Orbiter Mission: Continuing a Record of Exploration from Mars Orbit,” [1] this paper provides a 2018 status update on the MRO Mission. A signature event since the 2017 writing is the onset and evolution of a planet-encircling dust event (PEDE), the first such event since 2007. Additional recent science highlights for MRO include the discovery of mid-latitude ice cliffs, polar cap characterization, daily global mapping of the 2018 PEDE dust activity and the atmospheric thermal response, further characterization of the tantalizing recurring slope lineae (RSL), and continued detection of surface changes. Programmatically, UHF relay support for the Mars Science Laboratory (MSL) rover Curiosity and the Mars Exploration Rover (MER) rover Opportunity continues at a pace that provides the engineers and scientists operating those surface vehicles timely information to support their mission planning and science analysis. Most of the landing site characterization requests for the NASA Mars 2020 rover and the ESA ExoMars Rover/Surface Platform (RSP) missions have been completed, with final acquisitions delayed due to the obscuring dust haze from the current PEDE. In parallel, the flight team has faced new engineering challenges as the spacecraft has aged. The team has developed and is implementing actions that are aimed at stretching spacecraft battery life. A new all-stellar capability using the spacecraft’s star trackers now allows for normal spacecraft operations without IMUs. In addition to its current relay duties, MRO will be synchronized to provide critical communications support for the InSight Entry, Descent, and Landing (EDL) event on November 26, 2018, and will be readied to support InSight’s critical commissioning phase with UHF relay support and environmental characterization. A new split-pass relay capability has been developed which will allow MRO to relay with two surface vehicles in “close proximity” on the same overflight, i.e. the InSight lander and the Curiosity rover. Extended for another year of operations by NASA, this paper will highlight recent scientific progress and describe actions that will extend MRO’s life well into the 2020’s as a key element of the Mars Exploration Program.

Zurek, Richard W.↗

NASA NTRS2019

Enabling Real-time Multi-messenger Astrophysics Discoveries with Deep Learning

Multi-messenger astrophysics is a fast-growing, interdisciplinary field that combines data, which vary in volume and speed of data processing, from many different instruments that probe the Universe using different cosmic messengers: electromagnetic waves, cosmic rays, gravitational waves and neutrinos. In this Expert Recommendation, we review the key challenges of real-time observations of gravitational wave sources and their electromagnetic and astroparticle counterparts, and make a number of recommendations to maximize their potential for scientific discovery. These recommendations refer to the design of scalable and computationally efficient machine learning algorithms; the cyber-infrastructure to numerically simulate astrophysical sources, and to process and interpret multi-messenger astrophysics data; the management of gravitational wave detections to trigger real-time alerts for electromagnetic and astroparticle follow-ups; a vision to harness future developments of machine learning and cyber-infrastructure resources to cope with the big-data requirements; and the need to build a community of experts to realize the goals of multi-messenger astrophysics.

E A Huerta↗

NASA NTRSDate not supplied

DEVELOP: Building Capacity in Early Career Individuals to Apply NASA Earth Observations in Health and Air Quality

The NASA DEVELOP National Program builds capacity to use and apply NASA Earth observations to address environmental concerns around the globe. The DEVELOP model builds capacity in both participants (students, recent graduates, and early and transitioning career professionals), who conduct the projects, and partners (decision and policy makers), who are recipients of project methodologies and results. While projects focus on a spectrum of thematic topics, health and air quality related topics made up more than a quarter of DEVELOP’s FY2023 project portfolio. These projects worked in collaboration with over 30 partner organizations throughout the US and internationally to explore how Earth observations could support decision making in areas such as health and air quality, wildland fires, climate, urban development, and transportation and infrastructure. This presentation provides an overview of the DEVELOP model of building capacity to use Earth observation data, environmental decision-making needs identified in health and air quality relevant projects, DEVELOP project case studies, commonly utilized data sources, and lessons learned. Key takeaways include best practices for project development and execution, how to balance learning with delivering impactful results for partners, and water resource relevant decisions guided by project end products.

Remote sensing↗

NASA NTRS2015

Thermal Protection Test Bed Pathfinder Development Project

In order to increase thermal protection capabilities for future reentry vehicles, a method to obtain relevant test data is required. Although arc jet testing can be used to obtain some data on materials, the best method to obtain these data is to actually expose them to an atmospheric reentry. The overprediction of the Orion EFT-1 flight data is an example of how the ground test to flight traceability is not fully understood. The RED-Data small reentry capsule developed by Terminal Velocity Aerospace is critical to understanding this traceability. In order to begin to utilize this technology, ES3 needs to be ready to build and integrate heat shields onto the RED-Data vehicle. Using a heritage Shuttle tile material for the heat shield will both allow valuable insight into the environment that the RED-Data vehicle can provide and give ES3 the knowledge and capability to build and integrate future heat shields for this vehicle.

Snapp, Cooper↗

NASA NTRS1991

NASA information systems commonality and convergence

Efforts to identify high payback functions performed by the Office of Space Science Applications (OSSA) data systems package existing operationally proven implementations as system building blocks and foster their use in the OSSA environment. An overview is given of the current state of OSSA data systems and the major challenges facing system developers over the next five years. Current trends in system commonality are discussed, and development is examined in the context of system design. Central system engineering approaches to solving the commonality and interoperability challenges are described. Efforts to package three diverse building blocks and to foster their reuse are documented.

Handley, Thomas H., Jr.↗

NASA NTRSDate not supplied

Clinical Decision Support - Concepts of Operation

We are entering a new era in space exploration to return to the moon and explore Mars. These ambitious goals will require significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities. These constraints make it absolutely necessary to develop transformative solutions using new technologies. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. The Clinical Decision Support (CDS) project addresses the gap Medical-701 within the Inflight Medical Conditions risk: Enhance medical capabilities within an exploration medical system. For long-duration, deep space missions, computational and data resources will play an important role in maintaining crew health, wellness and performance where the crew will need to be more self-reliant. The aim of the CDS project is to develop and provide recommended requirements for an in-vehicle CDSS that acts as an assistant for delivering optimal health and performance and medical care during exploration missions. The CDSS is envisioned as a software-based tool that will augment a crewmembers’ knowledge, skills and abilities to assist in decision-making and crew health and performance (CHP) management thus increasing CHP systems capabilities. The human interface will be context aware and lessen the cognitive load to assimilate and use information as well as combine large disparate data sets in such a manner that provides the crew with actionable insight to decisions related to crew medical, health and performance management. Crew autonomy will be provided through a CDS that presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. The CDS project addresses the need for crew members to operate independently during long duration space exploration missions that require medical Levels of Care (LoC) V, the highest level specified by NASA-STD-3001 and described in more detail by the ExMC interpretation of LoC document (NASA/TM-2017-219290), where significant changes to in-flight and habitat medical care necessitate increasing crew autonomy in decision making and task performance. The CDS project will develop and test a series of iterative and increasingly more complex system prototypes. These annual demonstrations of the data system integration with the crew health and performance domain will inform exploration medical system requirements for an on-board Clinical Decision Support System (CDSS) through a series of use cases that guide CDS prototype functionality. CDS concepts are based on ExMC Concept of Operations documents (presented separately) and will highlight architecture extensibility to other more complex analyses and tests using core crew health and performance integrated data management, processing and visualization capabilities. This approach also establishes how externally developed analyses and approaches could be added to expand a clinical decision support system and thus highlight how a comprehensive system can be commercially and/or globally developed. The CDS project will build upon the concept of an integrated data management approach based on the Medical Data Architecture (MDA) project to more fully address challenges associated with in-flight and habitat medical, health and performance care due to constraints on mass, volume, power, crew time and medical evacuation capabilities required for medical LoC V. These requirements will be derived through systems engineering approaches and software prototype developments over the course of the multi-year CDS project to address crew health and performance decision-making and task performance, often autonomously executed by the crew, in a manner that is consistent with the appropriate medical level of care for the mission. This presentation will provide an overview of the vision for the CDS project and highlight the initial accomplishments in project planning, implementation and requirements identification in fiscal year 2020.

clinical decision support↗

NASA NTRSDate not supplied

Clinical Decision Support - Overview and Update

We are entering a new era in space exploration to return to the moon and explore Mars. These ambitious goals will require significant changes to in-flight and habitat medical care due to constraints on mass, volume, power, crew time and medical evacuation capabilities. These constraints make it absolutely necessary to develop transformative solutions using new technologies. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) pushes the boundary of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit by identifying and testing next-generation medical care and crew health maintenance technologies. The Clinical Decision Support (CDS) project addresses the gap Medical-701 within the Inflight Medical Conditions risk: Enhance medical capabilities within an exploration medical system. For long-duration, deep space missions, computational and data resources will play an important role in maintaining crew health, wellness and performance where the crew will need to be more self-reliant. The aim of the CDS project is to develop and provide recommended requirements for an in-vehicle CDSS that acts as an assistant for delivering optimal health and performance and medical care during exploration missions. The CDSS is envisioned as a software-based tool that will augment a crewmembers’ knowledge, skills and abilities to assist in decision-making and crew health and performance (CHP) management thus increasing CHP systems capabilities. The human interface will be context aware and lessen the cognitive load to assimilate and use information as well as combine large disparate data sets in such a manner that provides the crew with actionable insight to decisions related to crew medical, health and performance management. Crew autonomy will be provided through a CDS that presents knowledge and data in a context aware manner to augment a crew members’ knowledge, skills and abilities during the process of observation, orientation, decisions and action. The CDS project addresses the need for crew members to operate independently during long duration space exploration missions that require medical Levels of Care (LoC) V, the highest level specified by NASA-STD-3001 and described in more detail by the ExMC interpretation of LoC document (NASA/TM-2017-219290), where significant changes to in-flight and habitat medical care necessitate increasing crew autonomy in decision making and task performance. The CDS project will develop and test a series of iterative and increasingly more complex system prototypes. These annual demonstrations of the data system integration with the crew health and performance domain will inform exploration medical system requirements for an on-board Clinical Decision Support System (CDSS) through a series of use cases that guide CDS prototype functionality. CDS concepts are based on ExMC Concept of Operations documents (presented separately) and will highlight architecture extensibility to other more complex analyses and tests using core crew health and performance integrated data management, processing and visualization capabilities. This approach also establishes how externally developed analyses and approaches could be added to expand a clinical decision support system and thus highlight how a comprehensive system can be commercially and/or globally developed. The CDS project will build upon the concept of an integrated data management approach based on the Medical Data Architecture (MDA) project to more fully address challenges associated with in-flight and habitat medical, health and performance care due to constraints on mass, volume, power, crew time and medical evacuation capabilities required for medical LoC V. These requirements will be derived through systems engineering approaches and software prototype developments over the course of the multi-year CDS project to address crew health and performance decision-making and task performance, often autonomously executed by the crew, in a manner that is consistent with the appropriate medical level of care for the mission. This presentation will provide an overview of the vision for the CDS project and highlight the initial accomplishments in project planning, implementation and requirements identification in fiscal year 2020.

clinical decision support system↗

NASA NTRS2019

Progress Toward Implementation of Coupled Ocean/Atmosphere in Unified Forward Operator (UFO)

The (Sea-Ice Ocean and Coupled Assimilation) SOCA project focuses on meshing atmospheric and marine data assimilation efforts to create innovative data assimilation systems. One of the main goals ofSOCA is to make use of surface-sensitive radiances to constrain sea-ice and upper ocean fields (e.g., salinity, temperature, sea-ice fraction, sea-ice temperature, etc.). the focus of this research is to build first elements toward an ocean/sea-ice/atmosphere coupled data assimilation capability, with a focus on supporting and developing the assimilation of observations sensitive to multiple sub-domains. We Setup the existing Joint Effort for Data assimilation Integration (JEDI) coupled UFO (CRTM related) for surface sensitive microwave radiances (SST and SSS) focusing on Global Precipitation Measurement (GPM) Imager (GMI) and Soil Moisture Active Passive (SMAP).

Ebrahimi, Hamideh↗

NASA NTRSDate not supplied

Role of NDE and In-Situ Process Monitoring in Managing Risk of AM Space Hardware

The recently published NASA-STD-6030 defines the Additive Manufacturing (AM) Requirements for Spaceflight Systems. Key aspects of the certification approach include the development of a qualified material process (QMP) and material characterization determined by part classification. Nondestructive evaluation (NDE) of the full surface and volume is required for all part classifications except those with negligible risk. NASA is exploring the use of in-process monitoring data to improve risk posture and supplement post-build inspection for complex parts. Currently, the most challenging obstacle to overcome is linking the indications in the monitoring data to the physics of the process and the final material state of the finished part. NASA is undertaking studies to understand and quantify this relationship for various monitoring methods. The desired goal is to develop a protocol to establish this correlation for any monitoring method. Once this correlation is known, the critical defect size can be linked to a representative indication in the monitoring data, and the capability of the monitoring system can be tested using the 90/95 probability of detection requirement for NDE methods. This would enable the use of in-process monitoring as a defect screening activity for AM part certification. Many high-criticality components built with AM have high complexity and therefore limited inspectability, so using in-process monitoring can help address this certification gap. The use of adaptive, closed-loop monitoring systems that alter the locked process will require a new approach to the QMP.

additive manufacturing↗

NASA NTRSDate not supplied

Role of NDE and In-Situ Process Monitoring in Managing Risk of AM Space Hardware

The recently published NASA-STD-6030 defines the Additive Manufacturing (AM) Requirements for Spaceflight Systems. Key aspects of the certification approach include the development of a qualified material process (QMP) and material characterization determined by part classification. Nondestructive evaluation (NDE) of the full surface and volume is required for all part classifications except those with negligible risk. NASA is exploring the use of in-process monitoring data to improve risk posture and supplement post-build inspection for complex parts. Currently, the most challenging obstacle to overcome is linking the indications in the monitoring data to the physics of the process and the final material state of the finished part. NASA is undertaking studies to understand and quantify this relationship for various monitoring methods. The desired goal is to develop a protocol to establish this correlation for any monitoring method. Once this correlation is known, the critical defect size can be linked to a representative indication in the monitoring data, and the capability of the monitoring system can be tested using the 90/95 probability of detection requirement for NDE methods. This would enable the use of in-process monitoring as a defect screening activity for AM part certification. Many high-criticality components built with AM have high complexity and therefore limited inspectability, so using in-process monitoring can help address this certification gap. The use of adaptive, closed-loop monitoring systems that alter the locked process will require a new approach to the QMP.

advanced manufacturing↗

NASA NTRSDate not supplied

Game Based Learning For Earth Science Applications Training

Current NASA Earth capacity development programs employ mechanisms ranging from online resource sharing, and virtual and in-person trainings to share knowledge. While these programs are highly successful at engaging individuals around the world – in 2018, over 8000 individuals and over 2000 institutions from all 50 US states and over 140 countries were engaged through over 150 projects and trainings – user feedback has highlighted the desire for expanded hands-on, practical experiences in incorporating NASA EO insights with localized data and actions. We aim to address this gap by leveraging the benefits of game-based learning to build user skills in integrating NASA and local EO data to guide decisions for climate resiliency and hazard planning. This project is being executed as a two-phase crowdsourced challenge: 1) Phase 1 will require a well-researched product concept that reflects an understanding of NASA’s Earth data and tools and user needs, and proposes an innovative and interactive game or extended reality experience to train users in identifying relevant NASA data and applying insights to their climate resiliency decisions; 2) Winners of Phase 1 will be provided seed funding to develop a working prototype of the product. We aim to award 1-3 final winners to support the development of more than one game, thereby ensuring that NASA's diverse audiences around the world can access training games that best suit their needs and capabilities. This EO training game project fits in the NASA Earth Science Applied Sciences Program’s Capacity Development Program, contributing to the program mission of “helping people around the world better understand [NASA’s Earth] data and find ways to use them” (https://appliedsciences.nasa.gov/what-we-do/capacity-building). The final training game will complement existing programmatic activities of workforce development, trainings, and collaborative projects, while providing the unique value of providing interactive experiences to users and collecting real-time data and feedback to improve NASA’s Earth applications’ products and services related to climate resilience.

Human centered design↗

NASA NTRSDate not supplied

3D Scanning Laboratory

The 3D Scanning Lab uses a number of technologies to capture 3D surface data. Those technologies are structured light scanning, discrete point measurement photogrammetry and Light Detecting and Ranging(LIDAR). Structured light is a non-contact optical technique used to capture as built surface geometries quickly and accurately. LIDAR is a laser scanning technique used to capture 3D surfaces. And photogrammetry uses a certified DSLR camera to measure discrete registered and non-registered points in 3D space. MSFC’s 3D Scanning Team uses 3D scanning to provide hardware inspections, reverse engineered CAD models, manufacturing/process development and digital assemblies. The inspection process compares the captured data to CAD, providing a color plot detailing the deviations of the scan data to the CAD model. Dimensional measurements and GD&T can also be interrogated. Inspection can provide scan-to-scan data comparisons which is ideal for assessing tested hardware, e.g. comparing data captured before and after hardware testing. Reverse engineering is used to develop CAD models from scan data. This is useful for heritage hardware studies, developing building or structural models and inputs for simulation studies and design efforts. The lab uses the 3D surface scan data to drive manufacturing/machining processes, termed match machining. This technique has been used to modify nozzles, injectors, additive manufactured parts, composite barrel sections, etc. Parts of an assembly can be scanned and assembled in a virtual environment providing an accurate 3D representation of the assembled hardware in its as-scanned state. This can provide detailed information of internal components that would otherwise not be accessible.

Advanced Manufacturing↗

NASA NTRS2002

Use of GPR Surveys in Historical Archaeology Studies at Gainesville Mississippi

Ground Penetrating Radar (GPR) was used in recent surveys to acquire subsurface geophysical data for historic sites at Gainesville, Mississippi, a town abandoned in 1962 with the building of the John C. Stennis Space Center. Prior to GPR data collection, a 20- by 20-meter grid was established using UTM map projection and GPS for locating cell corners. Lines of GPR data were then collected every 25 centimeters. The images were then processed, and coregistered to georeferenced aerial and satellite imagery. This procedure is enabling analysts to assess the GPR imagery more effectively in a geospatial context. Field validation of anomalies created by known subsurface features from both recent and historic sources is allowing soil attributes, such as variations in Relative Dielectric Permittivity, to be tested more accurately. Additional work is assessing how GPR data can be effectively combined with other forms of remote sensing to direct archaeological surveys and excavations.

Goodwin, Ben↗

NASA NTRS2017

Pyroclastics Northeast of Gassendi Crater: Discovery/Characteristics/Implications

In our ongoing effort to better understand lunar volcanism on the Moon, we are investigating pyroclastic deposits in the Gassendi region. Interest in pyroclastics has remained high due to the availability of high-resolution data (LRO, Kaguya), which is used to build on previous remote sensing studies [e.g., 1, 2, 3] and also extensive studies of lunar pyroclastic glasses [4, 5]. Analyses conducted in the laboratory of pyroclastic spheres from several deposits show that this volcanic material had a greater depth of origin and lesser fractional crystallization than mare basalts [e.g., 4, 6]. Data indicates that pyroclastic glasses are the best examples of primitive materials on the Moon, and they are important for both characterizing the lunar interior and as a starting place for under-standing the origin and evolution of lunar basaltic magmatism [2].

Giguere, T. A.↗

NASA NTRS2024

Tracking Community Building in Open Science

Open Science is enabled by a vibrant community of researchers who regularly engage with the data, from its production to its organization, curation, archiving, dissemination, analysis, and publication. This presentation will examine community building in open science. The NASA Open Science Data Repository (OSDR) makes data available to the public following the FAIR (Findability, Accessibility, Interoperability, and Reusability) principles. OSDR takes open science further with the OS Analysis Working Groups (AWGs) that facilitate community development and promotion. The primary activity of each AWG is to establish and validate analytical processes to generate higher-order data from data housed in OSDR. There are a number of these groups on various topics, including the Animal AWG, Plant AWG, Microbial AWG, Multi-Omics AWG, AI/ML AWG, and the Ames Life Sciences Data Archive (ALSDA) AWG. The international volunteers participating in these AWGs come from academia, citizen science initiatives, industry, and government. They include researchers, principal investigators, professors, trained hobbyists, and students from various domains and disciplines. Anyone may request to join the AWGs, and membership requests are vetted monthly by the group organizers before granting admission. Core to membership is demonstrated expertise through records of training, integrity, work in the professed domain(s), and good community standing. Regular virtual meetings are held for each AWG, with a varying cadence depending on the group's needs and goals. AWG communities share their expertise in research including cutting edge tools, software, frameworks, data formats, and libraries accelerating research collectively. This collaborative approach helps community members cross technology gaps and identify emerging challenges. These diverse communities encompass a wide range of individuals hailing from various sectors within the Science Mission Directorate and beyond. They serve as a means to promote and enhance transparency, accessibility, and inclusion. An annual AWG Symposium brings contributors together in person. Participation in AWGs can be synchronous or asynchronous, with some groups performing most of their work in off hours. Participants gain valuable skills and connections that allow them to add value to their communities and new organizations that they join, resulting in an expanded return on investment for the space life science community. Open science is increasingly a federal mandate and initiatives like NASA's Transform to Open Science and instruments like the Decadal Survey of Biological and Physical Sciences in Space demonstrate the need to carefully consider best practices in this domain. Here, we present greater detail about the makeup and participation metrics of the various AWGs affiliated with OSDR and details of successful peer-reviewed publication campaigns.

Christina M Johnson↗

NASA NTRSDate not supplied

Tracking Community Building in Open Science

Open Science is enabled by a vibrant community of researchers who regularly engage with the data, from its production to its organization, curation, archiving, dissemination, analysis, and publication. This presentation will examine community building in open science. The NASA Open Science Data Repository (OSDR) makes data available to the public following the FAIR (Findability, Accessibility, Interoperability, and Reusability) principles. OSDR takes open science further with the OS Analysis Working Groups (AWGs) that facilitate community development and promotion. The primary activity of each AWG is to establish and validate analytical processes to generate higher-order data from data housed in OSDR. There are a number of these groups on various topics, including the Animal AWG, Plant AWG, Microbial AWG, Multi-Omics AWG, AI/ML AWG, and the Ames Life Sciences Data Archive (ALSDA) AWG. The international volunteers participating in these AWGs come from academia, citizen science initiatives, industry, and government. They include researchers, principal investigators, professors, trained hobbyists, and students from various domains and disciplines. Anyone may request to join the AWGs, and membership requests are vetted monthly by the group organizers before granting admission. Core to membership is demonstrated expertise through records of training, integrity, work in the professed domain(s), and good community standing. Regular virtual meetings are held for each AWG, with a varying cadence depending on the group's needs and goals. AWG communities share their expertise in research including cutting edge tools, software, frameworks, data formats, and libraries accelerating research collectively. This collaborative approach helps community members cross technology gaps and identify emerging challenges. These diverse communities encompass a wide range of individuals hailing from various sectors within the Science Mission Directorate and beyond. They serve as a means to promote and enhance transparency, accessibility, and inclusion. An annual AWG Symposium brings contributors together in person. Participation in AWGs can be synchronous or asynchronous, with some groups performing most of their work in off hours. Participants gain valuable skills and connections that allow them to add value to their communities and new organizations that they join, resulting in an expanded return on investment for the space life science community. Open science is increasingly a federal mandate and initiatives like NASA's Transform to Open Science and instruments like the Decadal Survey of Biological and Physical Sciences in Space demonstrate the need to carefully consider best practices in this domain. Here, we present greater detail about the makeup and participation metrics of the various AWGs affiliated with OSDR and details of successful peer-reviewed publication campaigns.

Christina M Johnson↗

NASA NTRS1982

A modular data system for Spacelab experiments

This overview describes a flexible system of electronic and mechanical building blocks with characteristics and capabilities suitable for construction of a flight-capable experiment data management system. The initial space application of this modular system, called the Spacelab Payload System Modular Electronics (SPSME), is the data system for the Nuclear Radiation Monitor (NRM) on Spacelab Mission 2.

Frost, W. O.↗

NASA NTRS2007

The Use of GIS and Remotely Sensed Data in Environmental Public Health Tracking (EPHT): The HELIX-Atlanta Experience

As part of the National Environmental Public Health Tracking Network (EPHTN), the National Center for Environmental Health (NCEH) at the Centers for Disease Control and Prevention (CDC) is leading a project in collaboration with the NASA Marshall Space Flight Center (NASA/MSFC) called Health and Environment Linked for Information Exchange (HELIX-Atlanta). HELIX-Atlanta's goal is to examine the feasibility of building an integrated electronic health and environmental data network in five counties of metropolitan Atlanta, GA. Under HELIX-Atlanta, pilot projects are being conducted to develop methods to characterize exposure; link health and environmental data; analyze the relationship between health and environmental factors; and communicate findings. There is evidence in the research literature that asthmatic persons are at increased risk of developing asthma exacerbations with exposure to environmental factors, including PM(sub 2.5). Thus, HELIX-Atlanta is focusing on methods for characterizing population exposure to PM(sub 2.5) for the Atlanta metropolitan area that could be used in ongoing surveillance. NASA/MSFC is working with CDC to combine NASA earth science satellite observations related to air quality and environmental monitoring data to model surface estimates of fine particulate matter (PM(sub 2.5)) concentrations in a Geographic Information System (GIS) that can be linked with clinic visits for asthma on the aggregated grid level as well as the individual level at the geographic locations of the patients' residences.

Al-Hamdan, Mohammad Z.↗