Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “apparent size”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Carbon-rich Chondritic Clast PV1 from the Plainview H-chondrite Regolith Formation from H3 Chondrite Material by Possible Cometary Impact

Chondritic clast PV1 from the Plainview H-chondrite regolith breccia is a subrounded, 5-mm diameter unequilibrated chondritic fragment that contains 13 wt% C occurring mainly within irregularly shaped 30-400-micron-size opaque patches. The clast formed from H3 chondrite material as indicated by the mean apparent chondrule diameter (310 micron vs. approximately 300 micron in H3 chondrites), the mean Mg-normalized refractory lithophile abundance ratio (1.00 +/- 0.09 XH), the previously determined 0-isotopic composition (Delta O-17 = 0.66% vs. 0.68 +/- 0.04%0 in H3 chondrites and 0.73 +/- 0.09% in H4-6 chondrites), the heterogeneous olivine compositions in grain cores (with a minimum range of Fal-19), and the presence of glass in some chondrules. Although the clast lacks the fine-grained, ferroan silicate matrix material present in type 3 ordinary chondrites, PV1 contains objects that appear to be recrystallized clumps of matrix material. Similarly, the apparent dearth of radial pyroxene and cryptocrystalline chondrules in PV1 is accounted for by the presence of some recrystallized fragments of these chondrule textural types. All of the chondrules in PV1 are interfused indicating that temperatures must have briefly reached approximately 1100C (the approximate solidus temperature of H-chondrite silicate). The most likely source of this heating was by an impact. Some metal was lost during impact heating as indicated by the moderately low abundance of metallic Fe-Ni in PV1 (approximately 14 wt%) compared to that in mean H chondrites (approximately 18 wt%). The carbon enrichment of the clast may have resulted from a second impact event, one involving a cometary projectile, possibly a Jupiter-family comet. As the clast cooled, it experienced hydrothermal alteration at low water/rock ratios as evidenced by the thick rims of ferroan olivine around low-FeO olivine cores. The C-rich chondritic clast was later incorporated into the H-chondrite parent-body regolith and extensively fractured and faulted.

Rubin, Alan E.↗

Inverse CeO2/CuO Catalyst as an Alternative to Classical Direct Configurations for Preferential Oxidation of CO in Hydrogen-Rich Stream

A novel inverse CeO{sub 2}/CuO catalyst for preferential oxidation of CO in H{sub 2}-rich stream (CO-PROX) has been developed on the basis of a hypothesis extracted from previous work of the group (JACS 2007, 129, 12064). Possible separation of the two competing oxidation reactions involved in the process (of CO and H{sub 2}, respectively) is the key to modulation of overall CO-PROX activity and is based on involvement of different sites as most active ones for each of the two reactions. Achievement of large size CuO particles and adequate CeO{sub 2}-CuO interfacial configurations in the inverse catalyst apparently allows appreciable enhancement of the catalytic properties of this kind of system for CO-PROX, constituting an interesting alternative to classic direct configurations so far explored for this process. Reasons for such behavior are analyzed on the basis of operando-XRD, -XAFS, and -DRIFTS studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Substrate-Mediated Evaporation and Stochastic Evolution of Supported Au Nanoparticles

Here, we use in situ transmission electron microscopy with automated tracking to study supported gold nanoparticles (NPs) during high-temperature vacuum annealing. The average mass loss per NP is governed by a flat, nearly size-independent substrate-mediated evaporation profile. On top of this mean shrinkage, individual NPs show significant fluctuations in apparent growth or shrinkage, and NP volume follows a random-walk-like trajectory. To rationalize both the ensemble-mean behavior and the particle-resolved variability, we develop a self-consistent theory that couples substrate-mediated evaporation to collective 2D Ostwald-type mass exchange through a shared adatom field, described in terms of a renormalized screening length and background concentration. In the experimentally relevant regime, the theory predicts an approximately size-independent mean shrinkage rate and clarifies how net mass loss suppresses classical coarsening. Superimposed on this deterministic drift, we quantify stochastic volume trajectories and capture their fluctuation spectrum with a minimal Langevin description consistent with intermittent adatom attachment and detachment events. In addition, we characterize the lateral diffusive motion of NPs, which is responsible for their coalescence. Altogether, our results highlight that stochasticity is intrinsic at the nanoscale and that predicting the evolution of supported NPs at early and intermediate times requires a unified framework combining substrate-mediated evaporation, collective mass exchange, and stochastic fluctuations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

STELLAR POPULATIONS FROM SPECTROSCOPY OF A LARGE SAMPLE OF QUIESCENT GALAXIES AT Z > 1: MEASURING THE CONTRIBUTION OF PROGENITOR BIAS TO EARLY SIZE GROWTH

We analyze the stellar populations of a sample of 62 massive (log M {sub *}/M {sub ☉} > 10.7) galaxies in the redshift range 1 < z < 1.6, with the main goal of investigating the role of recent quenching in the size growth of quiescent galaxies. We demonstrate that our sample is not biased toward bright, compact, or young galaxies, and thus is representative of the overall quiescent population. Our high signal-to-noise ratio Keck/LRIS spectra probe the rest-frame Balmer break region that contains important absorption line diagnostics of recent star formation activity. We obtain improved measures of the various stellar population parameters, including the star formation timescale τ, age, and dust extinction, by fitting templates jointly to both our spectroscopic and broadband photometric data. We identify which quiescent galaxies were recently quenched and backtrack their individual evolving trajectories on the UVJ color-color plane finding evidence for two distinct quenching routes. By using sizes measured in the previous paper of this series, we confirm that the largest galaxies are indeed among the youngest at a given redshift. This is consistent with some contribution to the apparent growth from recent arrivals, an effect often called progenitor bias. However, we calculate that recently quenched objects can only be responsible for about half the increase in average size of quiescent galaxies over a 1.5 Gyr period, corresponding to the redshift interval 1.25 < z < 2. The remainder of the observed size evolution arises from a genuine growth of long-standing quiescent galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Microstructural characterization of weld joints of 9Cr reduced activation ferritic martensitic steel fabricated by different joining methods

This paper presents a detailed electron microscopy study on the microstructure of various regions of weldment fabricated by three welding methods namely tungsten inert gas welding, electron beam welding and laser beam welding in an indigenously developed 9Cr reduced activation ferritic/martensitic steel. Electron back scatter diffraction studies showed a random micro-texture in all the three welds. Microstructural changes during thermal exposures were studied and corroborated with hardness and optimized conditions for the post weld heat treatment have been identified for this steel. Hollomon–Jaffe parameter has been used to estimate the extent of tempering. The activation energy for the tempering process has been evaluated and found to be corresponding to interstitial diffusion of carbon in ferrite matrix. The type and microchemistry of secondary phases in different regions of the weldment have been identified by analytical transmission electron microscopy. - Highlights: • Comparison of microstructural parameters in TIG, electron beam and laser welds of RAFM steel • EBSD studies to illustrate the absence of preferred orientation and identification of prior austenite grain size using phase identification map • Optimization of PWHT conditions for indigenous RAFM steel • Study of kinetics of tempering and estimation of apparent activation energy of the process.

36 MATERIALS SCIENCE↗

Size dependence of cubic to trigonal structural distortion in silver micro- and nanocrystals under high pressure

Silver micro- and nanocrystals with sizes of {approx}2--3.5 {mu}m and {approx}50--100 nm were uniaxially compressed under nonhydrostatic pressures (strong deviatoric stress) up to {approx}30 GPa at room temperature in a symmetric diamond-anvil cell and studied in situ using angle-dispersive synchrotron X-ray diffraction. A cubic to trigonal structural distortion along a 3-fold rotational axis was discovered by careful and comprehensive analysis of the apparent lattice parameter and full width at half-maximum, which are strongly dependent upon the Miller index and crystal size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Derivation and Application of a Global Albedo yielding an Optical Brightness To Physical Size Transformation Free of Systematic Errors

Orbital object data acquired via optical telescopes can play a crucial role in accurately defining the space environment. Radar systems probe the characteristics of small debris by measuring the reflected electromagnetic energy from an object of the same order of size as the wavelength of the radiation. This signal is affected by electrical conductivity of the bulk of the debris object, as well as its shape and orientation. Optical measurements use reflected solar radiation with wavelengths much smaller than the size of the objects. Just as with radar, the shape and orientation of an object are important, but we only need to consider the surface electrical properties of the debris material (i.e., the surface albedo), not the bulk electromagnetic properties. As a result, these two methods are complementary in that they measure somewhat independent physical properties to estimate the same thing, debris size. Short arc optical observations such as are typical of NASA's Liquid Mirror Telescope (LMT) give enough information to estimate an Assumed Circular Orbit (ACO) and an associated range. This information, combined with the apparent magnitude, can be used to estimate an "absolute" brightness (scaled to a fixed range and phase angle). This absolute magnitude is what is used to estimate debris size. However, the shape and surface albedo effects make the size estimates subject to systematic and random errors, such that it is impossible to ascertain the size of an individual object with any certainty. However, as has been shown with radar debris measurements, that does not preclude the ability to estimate the size distribution of a number of objects statistically. After systematic errors have been eliminated (range errors, phase function assumptions, photometry) there remains a random geometric albedo distribution that relates object size to absolute magnitude. Measurements by the LMT of a subset of tracked debris objects with sizes estimated from their radar cross sections indicate that the random variations in the albedo follow a log-normal distribution quite well. In addition, this distribution appears to be independent of object size over a considerable range in size. Note that this relation appears to hold for debris only, where the shapes and other properties are not primarily the result of human manufacture, but of random processes. With this information in hand, it now becomes possible to estimate the actual size distribution we are sampling from. We have identified two characteristics of the space debris population that make this process tractable and by extension have developed a methodology for performing the transformation.

Mulrooney, Dr. Mark K.↗

Enhanced Monte Carlo Simulation of the Voxel Phantom Lattice Submersed in a Contaminated Air Environment

External dose coefficient calculations reported for submersions in semi-infinite clouds, as in the Environmental Protection Agency: Federal Guidance Report 12, assume a person standing on the ground submerged in a radioactive cloud. In the scope of the work presented here, Oak Ridge National Laboratory's Center for Radiation Protection Knowledge has computed dose coefficients for monoenergetic photons, electrons, and positrons for worker exposures in three rooms of finite sizes representing an office, laboratory, and warehouse. In the process of simulating these exposures, International Commission on Radiological Protection (ICRP) Publication 110 reference adult male and female voxel phantom lattices were placed in the rooms filled with contaminated air. It was apparent that additional simulations were need to treat the non-tissue voxels surrounding the phantoms as containing the contaminated air. Dose coefficients for three room sizes representing an office, laboratory, and warehouse were computed. The coefficients for electrons exhibit little dependence on room size for most energies. However, for organs within the range of electron transport, the dose from source activity within the non-tissue voxels of the lattice surrounding the phantom becomes increasingly important. The photon dose coefficients vary based on room size because of longer mean free paths. It is important to include the air surrounding the voxel phantom within the voxel lattice in the calculations, when simulating a voxel phantom submersed in air for source particle energies below 200-300 keV, otherwise, the organ dose coefficient would be underestimated. Organ and effective dose coefficients for each gender, energy, and room size will be tabulated on the Oak Ridge National Laboratory - Center for Radiation Protection Knowledge website: http://ornl.gov/crpk.

61 RADIATION PROTECTION AND DOSIMETRY↗

Dependence of Gas-Phase Crotonaldehyde Hydrogenation Selectivity and Activity on the Size of Pt Nanoparticles (1.7-7.1 nm) Supported on SBA-15

The selectivity and activity for the hydrogenation of crotonaldehyde to crotyl alcohol and butyraldehyde was studied over a series of Pt nanoparticles (diameter of 1.7, 2.9, 3.6, and 7.1 nm). The nanoparticles were synthesized by the reduction of chloroplatinic acid by alcohol in the presence of poly(vinylpyrrolidone) (PVP), followed by encapsulation into mesoporous SBA-15 silica. The rate of crotonaldehyde hydrogenation and selectivity towards crotyl alcohol both increase with increasing particle size. The selectivity towards crotyl alcohol increased from 13.7 % to 33.9 % (8 Torr crotonaldehyde, 160 Torr H{sub 2} and 353 K), while the turnover frequency increases from 2.1 x 10{sup -2} s{sup -1} to 4.8 x 10{sup -2} s{sup -1} with an increase in the particle size from 1.7 nm to 7.1 nm. The decarbonylation pathway to form propene and CO is enhanced over the higher proportion of coordinatively unsaturated sites on the smaller nanoparticles. The apparent activation energy remains constant ({approx} 16 kcal mol{sup -1} for the formation of butyraldehyde and {approx} 8 kcal mol{sup -1} for the formation of crotyl alcohol) as a function of particle size. In the presence of 130-260 mTorr CO, the reaction rate decreases for all products with a CO reaction order of -0.9 for crotyl alcohol and butyraldehyde over 7.1 nm Pt particles; over 1.7 nm Pt particles, the order in CO is -1.4 and -0.9, respectively. Hydrogen reduction at 673 K after calcination in oxygen results in increased activity and selectivity relative to reduction at either higher or lower temperature; this is discussed with regards to the incomplete removal and/or change in morphology of the polymeric surface stabilizing agent, poly(vinylpyrrolidone) used for the synthesis of the Pt nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pancreatic neuroendocrine tumors: MR imaging features preoperatively predict lymph node metastasis

Purposes: Predictive factors of lymph node metastasis (LNM) in pancreatic neuroendocrine tumors (pNETs) are not well established. We sought to identify the value of MR imaging features in preoperatively predicting the lymph node metastasis of pNETs. Materials and methods: In this study, we enrolled 108 consecutive patients with pNETs between January 2009 and June 2018. MR morphologic features and quantitative data were evaluated. Predictors of LNM were evaluated using univariate and multivariate logistic regression models. Results: A total of 108 patients with pNETs were finally enrolled, including 82 LNM-negative and 26 LNM-positive patients. Features significantly related to the LNM of pNETs at univariate analysis were tumor size > 2 cm (P = 0.003), Ki-67 > 5% (P = 0.002), non-enhancement pattern (P < 0.001), apparent diffusion coefficient value (P < 0.001), main pancreatic duct dilation (P < 0.001) and pancreatic atrophy (P = 0.032) and extrapancreatic tumor spread (P = 0.001), CNRs during arterial, portal and delay phase (P = 0.005, 0.047, and 0.045, respectively), and histological classification (P = 0.006). At multivariate analysis, non-enhancement pattern (P = 0.019; odds ratio, 6.652; 95% CI 1.369, 32.321) and main pancreatic duct dilation (P = 0.018; odds ratio, 6.745; 95% CI 1.379, 32.991) were independent risk factors for predicting the LNM of pNETs. Conclusion: The non-enhancement characteristic and main pancreatic duct dilation appear to be linked with LNM in pNETs. These radiological predictors can be easily obtained preoperatively, and may help to avoid missing pNETs with a high risk of LNM.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Using in-situ strain measurements to evaluate the accuracy of stress estimation procedures from fracture injection/shut-in tests

Fracture injection/shut-in tests are commonly used to measure the state of stress. Injection creates a hydraulic fracture (or in some cases, opens a preexisting fracture), and then the pressure after shut-in is monitored to identify fracture closure. Different interpretation procedures have been proposed for estimating closure, and the procedures sometimes yield significantly different results. In this study, direct, in-situ strain measurements are used to observe fracture reopening and closure. The tests were performed as part of the EGS Collab project, a mesoscale project performed at 1.25 and 1.5 km depth at the Sanford Underground Research Facility. The tests were instrumented with the SIMFIP tool, a double-packer probe with a high-resolution three-dimensional borehole displacement sensor. The measurements provide a direct observation of the fracture closure signature, enabling a high-fidelity estimate of the fracture closure stress (ie, the normal stress on the fracture). In two of the four tests, injection created an opening mode fracture, and so the closure stress can be interpreted as the minimum principal stress. In the other two tests, injection probably opened preexisting natural fractures, and so the closure stress can be interpreted as the normal stress on the fractures. The strain measurements are compared against different proposed methods for estimating closure stress from pressure transients. The shut-in transients are analyzed with two techniques that are widely used in the field of petroleum engineering – the ‘tangent’ method and the ‘compliance’ method. In three of the four tests, the tangent method significantly underestimates the closure stress. The compliance method is reasonably accurate in all four tests. Closure stress is also interpreted using two other commonly-used methods – ‘first deviation from linearity’ and the method of Hayashi and Haimson. In comparison with the SIMFIP data, these methods tend to overestimate the closure stress, evidently because they identify closure from early-time transient effects, such as near-wellbore tortuosity. In two of the tests, microseismic imaging provides an independent estimate of the size of the fracture created by injection. When combined with a simple mass balance calculation, the SIMFIP stress measurements yield predictions of fracture size that are reasonably consistent with the estimates from microseismic. In conclusion, the calculations imply an apparent fracture toughness 2-3x higher than typical laboratory-derived values.

58 GEOSCIENCES↗

Effect of Subgrid Heterogeneity on Scaling Geochemical and Biogeochemical Reactions: A Case of U(VI) Desorption

The effect of subgrid heterogeneity in sediment properties on the rate of uranyl[U(VI)] desorption was investigated using a sediment collected from the US Department of Energy Hanford site. The sediment was sieved into 7 grain size fractions that each exhibited different U(VI) desorption properties. Six columns were assembled using the sediment with its grain size fractions arranged in different spatial configurations to mimic subgrid heterogeneity in reactive transport properties. The apparent rate of U(VI) desorption varied significantly in the columns. Those columns with sediment structures leading to preferential transport had much lower rates of U(VI) desorption than those with relatively homogeneous transport. Modeling analysis indicated that the U(VI) desorption model and parameters characterized from well-mixed reactors significantly over-predicted the measured U(VI) desorption in the columns with preferential transport. A dual domain model, which operationally separates reactive transport properties into two subgrid domains improved the predictions significantly. A similar effect of subgrid heterogeneity, albeit at a less degree, was observed for denitrification, which also occurred in the columns. The results imply that subgrid heterogeneity is an important consideration in extrapolating reaction rates from the laboratory to field.

Environmental Molecular Sciences Laboratory↗

Transport and strain relaxation in wurtzite InAs-GaAs core-shell heterowires

Indium-arsenide-gallium-arsenide (InAs-GaAs) core-shell, wurtzite nanowires have been grown on GaAs (001) substrates. The core-shell geometries (core radii 11 to 26 nm, shell thickness >2.5 nm) exceeded equilibrium critical values for strain relaxation via dislocations, apparent from transmission electron microscopy. Partial axial relaxation is detected in all nanowires increasing exponentially with size, while radial strain relaxation is >90%, but undetected in nanowires with both smaller core radii <16 nm and shell thicknesses <5 nm. Electrical measurements on individual core-shell nanowires show that the resulting dislocations are correlated with reduced electron field-effect mobility compared to bare InAs nanowires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface plasma source with saddle antenna radio frequency plasma generator

A prototype RF H{sup -} surface plasma source (SPS) with saddle (SA) RF antenna is developed which will provide better power efficiency for high pulsed and average current, higher brightness with longer lifetime and higher reliability. Several versions of new plasma generators with small AlN discharge chambers and different antennas and magnetic field configurations were tested in the plasma source test stand. A prototype SA SPS was installed in the Spallation Neutron Source (SNS) ion source test stand with a larger, normal-sized SNS AlN chamber that achieved unanalyzed peak currents of up to 67 mA with an apparent efficiency up to 1.6 mA/kW. Control experiments with H{sup -} beam produced by SNS SPS with internal and external antennas were conducted. A new version of the RF triggering plasma gun has been designed. A saddle antenna SPS with water cooling is fabricated for high duty factor testing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE EFFECT OF A COSMIC RAY PRECURSOR IN SN 1006?

Like many young supernova remnants, SN 1006 exhibits what appear to be clumps of ejecta close to or protruding beyond the main blast wave. In this Letter, we examine three such protrusions along the east rim. They are semi-aligned with ejecta fingers behind the shock-front and exhibit emission lines from O VII and O VIII. We first interpret them in the context of an upstream medium modified by the saturated non-resonant Bell instability which enhances the growth of Rayleigh-Taylor instabilities when advected post-shock. We discuss their apparent periodicity if the spacing is determined by properties of the remnant or by a preferred size scale in the cosmic ray precursor. We also briefly discuss the alternative that these structures have an origin in the ejecta structure of the explosion itself. In this case, the young evolutionary age of SN 1006 would imply density structure within the outermost layers of the explosion with potentially important implications for deflagration and detonation in thermonuclear supernova explosion models.

79 ASTRONOMY AND ASTROPHYSICS↗

Subtask 4.4 - North Dakota Lignite Fuel Upgrading

This project will add the capability for the Energy & Environmental Research Center (EERC) to conduct Fischer-Tropsch (FT) catalyst testing at a scale consistent with the benchscale continuous fluid-bed reactor. This capability will enable various vendors to test their FT catalysts on actual coal-derived syngas. The project goals were to also develop some EERC expertise with issues associated with FT liquid production. A study by Dr. Calvin Bartholmew at Brigham Young University (BYU) is further apparent that it is possible to build a single reactor (rather than multiple reactors of different sizes) consisting of three 1-inch-diameter, 10 foot-long tubes to accommodate the anticipated range of catalytic activities and process conditions. However, this single reactor should ideally be designed to operate over a significant range of recycle ratio (e.g., 1-10), temperature (25-400 C), pressure (10-25 bar), flow rate (1-6 scfm), and cooling duty (0.2-1.5 kW). It should have the flexibility of flowing gas to one, two, or three tubes. Based on the recommended design specifications provided by BYU while staying within the approved budget, the EERC decided to build a two fixed-bed reactor system with the capability to add a third reactor at a later time. This system was constructed to be modular and sized such that it can fit into the area around the EERC continuous fluid-bed reactor or also be located in explosion-rated areas such as the gasification tower next to the EERC pilot-scale transport reactor or in the National Center for Hydrogen Technology building high-bay area.

01 COAL, LIGNITE, AND PEAT↗

Irregular Mare Patches (IMPs): 100 Ma or 3 Ga?

IMPs exhibit a perplexing combination of characteristics that are consistent with either an approximately 100 Ma or 3 Ga formation. Dozens of small-area IMPs have crisp morphologies and crater size-frequency distributions (SFDs) that denote relatively recent geologic activity (less than 100 Ma); however, the apparently well-developed regolith on portions of the IMPs are in conflict with such a young age [1]. To test possible formation hypotheses (e.g., [1-5]), which range from ancient volcanism to contemporary outgassing, we examined IMP morphology at the meter-scale with LROC NAC images and derived elevation models. We focused on the largest IMPs (Ina, Sosigenes, Cauchy, Maskelyne, and Nubium), where contacts between deposits are best developed. Most of our observations are consistent with multiple generations of inflation and breakouts (or squeeze-ups) of basaltic lavas that were affected by local slopes. Some of the extrusions coalesced into larger mounds or filled pre-existing craters. We did not observe evidence of large-scale void space (e.g., fissures, fractures, linear depressions, or pits) within or beneath the mounds or rougher deposits (e.g., [5]). But, small-scale voids may be signified by isolated pitted textures. We also did not detect evidence of the cooling fractures or lava plates expected in young lava flows and observed in lunar impact melt deposits. The smooth texture of the mounds is enigmatic. Block-less craters suggest at least 5 m of friable or poorly-cohesive material (such as regolith), yet mound margins exhibit slopes greater than 30 deg requiring significant material strength. Blocks are not common on the mounds, but are sometimes excavated by impacts (usually excavated from beneath the mounds). The uneven deposits are equally enigmatic and texturally varied (blocky, pitted, and crenulated). They are deficient in superposed craters compared to the mounds. If the mounds are indeed of similar age to the rougher units, then their different superposed crater morphologies and SFDs need to be explained by factors other than their ages. Any mounds originally composed of friable surface materials would evolve differently from more coherent deposits (e.g., [6-7]).

Stopar, Julie↗