Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wedge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

The ground signatures of the expansion phase during multiple onset substorms

The paper examines the signatures of multiple-expansion-phase substorm onsets in night-time magnetograms as well as in recordings of auroral activity and energetic electron precipitation. Individual onsets of Pi2 magnetic pulsations observed at three widely spaced stations are used to define and time each onset accurately in order to distinguish between local variations in bay activity and fully developed substorm onsets; this method is equivalent to defining each new onset in terms of the brightening of an auroral arc and the formation of a westward-travelling surge. It is found that the formation of multiple auroral surges appears to be a fundamental feature of multiple-onset substorms, that each surge seems to be associated with a localized field-aligned current system which moves westward with the surge and perturbs the preexisting current wedge, and that this gives rise to the multiple-onset signatures observed on subauroral and low-latitude magnetograms. Since certain findings contradict existing models of multiple-onset events, an alternative model is proposed which is based on the fundamental role of surge activity and localized current wedges.

Pytte, T.↗

Comparison of axisymmetric and nonaxisymmetric nozzles installed on the F-15 configuration

An investigation has been conducted in the Langley 16-foot transonic tunnel to determine nozzle/afterbody performance of nonaxisymmetric nozzles installed in a 1/12-scale F-15 propulsion model. Tests were performed at Mach numbers from 0.60 to 1.20 at angles-of-attack from -2 to +9 deg and jet-total-pressure ratios from 1.0 (jet-off) to 5.0, depending on Mach number. The baseline F-15 afterbody was tested with axisymmetric nozzles, and two different two-dimensional wedge nozzle afterbody designs. Results of this investigation indicate that one of the two-dimensional afterbody designs had lower drag than the baseline at a Mach number of 1.20, and about the same drag for subsonic Mach numbers at scheduled nozzle pressure ratios. Thrust vectoring of the two-dimensional wedge nozzles produced significant induced lift on the afterbody and horizontal tails, while thrust reversing had little effect on horizontal tail effectiveness.

Pendergraft, O. C., Jr.↗

Acoustics-turbulence interaction

An investigation of the instability frequency was undertaken. Measurements revealed that the hot wire probe induces and sustains stable upstream oscillation of the free shear layer. The characteristics of the free shear layer tone are found to be different from the slit jet wedge edgetone phenomenon. The shear tone induced by a plane wedge in a plane free shear layer was then examined in order to further document the phenomenon. The eigenvalues and eigenfunctions of the tone fundamental show agreement with the spatial stability theory. A comprehensive summary of the results is also included.

Hussain, A. K. M. F.↗

Ion tracking in an electrostatic potential distribution

An ion tracking system utilizing a single detector was designed to resolve two dimensional potential distributions in a vacuum. The ion detector consisted of a continuous dynode electron multiplier tube mounted behind a series of aperture plates. The detector was located on a track below a wedge shaped structure used to produce the desired potential distribution. A 150 volt electron beam aimed at selected regions, ionized the residual gas in the chamber. The ions were ejected from their source points by electrostatic forces causing them to drift downward toward the detector. Measurements of particle energy, detector position, and entry angle of the incoming particle flux were used to initialize a computer trajectory-tracing program. The program assumes a known theoretically calculated potential distribution near the wedge for computation of particle trajectories, providing a basis for evaluating the data. Special attention was given to characterization of the ion detector.

Ross, D. P.↗

Aircraft noise propagation

Sound diffraction experiments conducted at NASA Langley Research Center to study the acoustical implications of the engine over wing configuration (noise-shielding by wing) and to provide a data base for assessing various theoretical approaches to the problem of aircraft noise reduction are described. Topics explored include the theory of sound diffraction around screens and wedges; the scattering of spherical waves by rectangular patches; plane wave diffraction by a wedge with finite impedence; and the effects of ambient flow and distribution sources.

Hadden, W. J.↗

Structure of the conical flowfield about external axial corners

A theoretical and experimental investigation of the flowfield about symmetrical and asymmetrical external axial corners formed by the juncture of swept compressive wedges is presented. A study is made of the nature of inviscid cross flow stagnation points and their dependence on certain flow parameters is derived. The importance of imposing the physically relevant boundary condition for numerical simulations is discussed. For the asymmetrical wedge configuration, the proper boundary condition along the axial corner is shown to be a conical analog of Prandtl-Meyer flow. Further insight into the flow structure is revealed by the experimental results.

Salas, M. D.↗

Numerical solution of a three-dimensional shock wave and turbulent boundary-layer interaction

A rapid numerical scheme is used to solve the complete mass-averaged Navier-Stokes equations for supersonic turbulent flow over a three-dimensional compression corner. A simple eddy viscosity model is developed, and the interaction of a swept shock wave and a three-dimensional turbulent boundary layer is studied. Good agreement is obtained between the present results and experimental measurements for the case of a wedge with an angle of 6 deg on a flat-plate sidewall. For the case of a 12-deg wedge angle, the computed results do not show the existence of a peak pressure found experimentally. However, the range of interaction, the plateau pressure, and the peak heat transfer are closely predicted for all cases. The high heat transfer near the axial corner is due to the thinning of the boundary layer and inflow of fresh high-momentum fluid. The heat transfer is relieved through pressure reduction and boundary-layer thickening.

Hung, C. M.↗

The free shear layer tone phenomenon and probe interference

The reported investigation shows that the hot-wire probe induces stable upstream oscillations in a free shear layer, similar to the jet edge tone mechanism. This effect can be significant also in measurements involving large-scale organized structure, conditional sampling, space-time correlation, and convection velocity, when a reference or indicator probe may be used near the origin of the free shear layer. It appears that even in a free shear layer without any wedge, an object in the flow sufficiently downstream can also provide feedback to the flow upstream. A description is given of the edge-tone phenomenon which is observed when a thin slit jet impinges on a plane wedge. Attention is given to the free shear layer tone induced by a hot-wire probe, the free shear layer tone phenomenon, and shear layer tone eigenvalues and eigenfunctions.

Hussain, A. K. M. F.↗

Geomorphic processes on the North Slope of Alaska

Three physiographic provinces comprise the North Slope of Alaska: the Arctic Mountains, the Arctic Foothills and the Arctic Coastal Plain Provinces. The features and processes in the Arctic Coastal Plain, a zone of continuous permafrost, are stressed in this paper. The evidence for and mechanisms of the geomorphic cycle are discussed starting with frost cracks. Frost cracks may form polygonal ground which leads to low-centered ice wedge polygons in areas having ice-rich permafrost. As the low-centered ice wedge polygons enlarge due to thermal erosion they may evolve into thaw lakes which are largely oriented in a northwest-southeast direction on the Arctic Coastal Plain. Eventual drainage of a deep lake may result in a closed-system pingo. Evidence of the various stages of the geomorphic cycle is ubiquitous on the Alaskan Arctic Coastal Plain and indicates the ice content of the permafrost in some areas.

Hall, D. K.↗

Effect of several geometric parameters on the static internal performance of three nonaxisymmetric nozzle concepts

Effects of several geometric parameters on the internal performance of nonaxisymmetric convergent-divergent, single-ramp expansion, and wedge nozzles were investigated at nozzle pressure ratios up to approximately 10. In addition, two different thrust-vectoring schemes were investigated with the wedge nozzle. The results indicated that as with conventional round nozzles, peak nonaxisymmetric nozzle, internal performance occurred near the nozzle pressure ratio required for fully expanded exhaust flow. Nozzle sidewall length or area generally had little effect on the internal performance of the nozzles investigated.

Berrier, B. L.↗

Some recent developments in the prediction of shock interaction phenomena at hypersonic speeds

The shock strengths for which either Edney type I or type II shock interference patterns can occur when two oblique shocks of opposite families intersect were determined graphically at Mach 10 by using logarithmic shock polar diagrams. The theoretical region of overlap for the two types of interaction was investigated by observing in the Schlieren system of the Langley 15-inch hypersonic flow apparatus the intersection of oblique shocks generated by two sharp 10 degree wedges as the wedge angles of attack and their relative positions were altered. A range of shock strengths for which either of the two interference patterns can exist was demonstrated.

Crawford, D. H.↗

A fracture specimen for high-temperature testing

A wedge-loaded tapered DCB specimen is proposed for fracture toughness and stable crack growth measurements of ceramic materials at elevated temperatures. The specimen is wedge-loaded by a compression pin seated in the starter notch. By appropriate selection of the specimen's taper and starter notch angle, the stress intensity factor is maintained relatively constant through 50 percent of the test section. Room temperature fracture toughness testings of commercial grade polycrystalline alumina specimens indicate that the crack will run straight for approximately 50 percent of the length of the test section without side grooving. A moderate 10 percent side grooving was sufficient to maintain straight crack extension throughout the entire specimen length.

Kobayashi, A. S.↗

Growth mechanisms of 'Katie's Floeberg'

The growth mechanism of the grounded ice feature on Hanna's Shoal, located at approximately 162 deg W, 72 deg N in the Chukchi Sea, has been analyzed using Landsat I and II satellite imagery. The primary mechanism of growth was deduced to be the formation of large wedges of ice against the upstream edge of the feature. These wedges of piled ice form in three stages and may or may not become permanently affixed to the core of the feature. Remains of these growth patterns can sometimes be seen in the interior of the feature on the satellite imagery.

Barrett, S. A.↗

High-resolution spectrometrometry/interferometer

Modified double-pass interferometer has several features that maximize its resolution. Proposed for rocket-borne probes of upper atmosphere, it includes cat's-eye retroreflectors in both arms, wedge-shaped beam splitter, and wedged optical-path compensator. Advantages are full tilt compensation, minimal spectrum "channeling," easy tunability, maximum fringe contrast, and even two-sided interferograms.

Breckinridge, J. B.↗

Thermal fatigue and oxidation data of oxide dispersion-strengthened alloys

Thermal fatigue and oxidation data were obtained 24 specimens representing 9 discrete oxide dispersion-strengthened alloy compositions or fabricating techniques. Double edge wedge specimens, both bare metal and coated for each systems, were cycled between fluidized beds maintained at 1130 C with a three minute immersion in each bed. The systems included alloys identified as 262 in hardness of HRC 38; 264 in hardness of HRC 38, 40 and 43; 265 HRC 39, 266 of HRC 37 and 40; 754; and 956. Specimens in the bare condition of 265 HRC 39 and 266 HRC 37 survived 6000 cycles without cracking on the small radius of the double edge wedge specimen. A coated specimen of 262 HRC 38, 266 HRC 37 and 266 HRC40 also survived 6000 cycles without cracking. A duplicate coated specimen of 262 HRC 38 alloy survived 5250 cycles before cracks appeared. All the alloys showed little weight change compared compared to alloys tested in prior programs.

Hofer, K. E.↗

Laser measurement of extinction coefficients of highly absorbing liquids

A coaxial dual-channel laser system has been developed for the measurement of extinction coefficients of highly absorbing liquids. An empty wedge-shaped sample cell is first translated laterally through a He-Ne laser beam to measure the differential thickness using interference fringes in reflection. The wedge cell is carefully filled with the oil sample and translated through the coaxially positioned dye laser beam for the differential attenuation or extinction measurement. Optional use of the instrumentation as a single-channel extinction measurement system and also as a refractometer is detailed. The system and calibration techniques were applied to the measurement of two crude oils whose extinction values were required to complete the analysis of airborne laser data gathered over four controlled spills.

Hoge, F. E.↗

Careful numerical study of flowfields about asymmetric external conical corners

A numerical study of the flowfield about asymmetrical external axial corners formed by the juncture of swept compressive wedges is presented. The geometrical configuration allows a unified treatment of external corners typical of delta wings and rectangular inlets. The study investigates how the flow transitions from a symmetrical flowfield with a cross-flow stagnation point at the corner to an asymmetrical flowfield for which the flow spills over the corner. The effects of leading-edge sweep, wedge compression, and corner radius are investigated.

Salas, M. D.↗

Numerical solution of the Navier-Stokes equations for a family of three-dimensional corner geometries

Three-dimensional corners occur in many aerodynamic engineering situations. Supersonic flow about such geometries is characterized by strong inviscid-viscid interactions which are analyzed adequately only through the solution of the Navier-Stokes equations. In this paper numerical solution for the laminar compressible Navier-Stokes equations are presented for a family of three-dimensional corners consisting of wedge-plate and wedge-cylinder intersecting boundaries. The equations of motion are transformed to a uniform rectangular computational domain. The computational technique is the MacCormack time-split algorithm vectorized and programmed to run on the CDD CYBER 203 computer. The metric data for the transformation is obtained from the 'two-boundary technique.'

Smith, R. E.↗