Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIRES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Monofilamentary In Situ Fe/MgB{sub 2} Superconducting Wires Fabricated by Pellet-in-Tube Method

Thin monofilamentary Fe/MgB{sub 2} superconducting wires without barriers are investigated by means of electrical transport measurements and surface and structural analysis methods. Small diameter wires are fabricated by pellet-in-tube method (PeIT) to obtain a high uniform initial filling density and heat treated as a function of various sintering temperatures and times. The results are discussed in terms of the grain connectivity, Fe{sub 2}B phase formation, and the relation between wire diameter and sintering conditions. We suggest that PeIT has a crucial importance to achieve homogeneous initial filling density, which leads to the fabrication of uniform long-length MgB{sub 2} wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Bias Current on Off-Diagonal Magnetoimpedance in Composite Wires

The off-diagonal magnetoimpedance in a composite wire consisting of a highly conductive inner core covered by a soft magnetic layer is studied theoretically. In the presence of bias current, the field dependence of the off-diagonal magnetoimpedance becomes asymmetric due to the combination of the circular magnetic field produced by the bias current and a helical anisotropy in the magnetic layer of the composite wire. The dependences of the asymmetric off-diagonal magnetoimpedance on the external field, frequency, and bias current are investigated. It is demonstrated that the off-diagonal magnetoimpedance in composite wires has high field sensitivity and exhibits nearly linear behavior at low external fields. The influence of the wire parameters such as the anisotropy axis angle, the magnetic layer thickness, and conductivity on the field sensitivity of the off-diagonal magnetoimpedance is analyzed. The results obtained may be useful for development of weak magnetic-field sensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Customized MgB{sub 2} Superconducting Wire Toward Practical Applications at Sam Dong in Korea

MgB{sub 2} superconducting wire from Sam Dong Co., Ltd. in Korea is suitable for various applications, including medical resonance imaging, fault current limiters, power cables, and transformers. So far, issues related to the wire production cost, current-carrying capacity, and conductor length (kilometers) are very important for further commercialization. Since 2014, our intensive research efforts have led to notable progress. Herein, we summarize and discuss our advanced research for achieving high-performance, scalable, and cost-effective MgB{sub 2} wires at Sam Dong. Based on our accumulated technical know-how, we will continue to fabricate more competitive and efficient MgB{sub 2} superconducting wires that will be suitable for the customer’s purposes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulating the effects of underground nuclear explosions with an exploding wire

Exploding wires can deposit significant amounts of energy (1000’s of Joules on a nano-microsecond timescales) into a very confined space. Under the right conditions they can even produce neutrons. While most exploding wire studies have been performed in open air and to a lesser extent liquids we have started to investigate enclosing the wire element in solid matrices like concrete to mimic the effects of an underground nuclear explosion. The temperatures and pressures achieved are quite sufficient to induce structural cracking and localized flash melting in the enclosing media like a real underground nuclear detonation. As a result exploding wires would appear to form the perfect trigger for releasing confined chemical species including gases in geological media to study migration behavior in a controlled environment. Details of the apparatus and some illustrations of it potential will be given.

Underground Nuclear Explosions, Exploding Wires, X↗

Microstructure and mechanical properties of pure copper wire produced by shear assisted processing and extrusion

Shear assisted processing and extrusion (ShAPE) process can consolidate powdered materials and simultaneously extrude wire or tube with improved properties. We successfully produced copper wire extrusions from powder and solid materials for the first time. The extrusion pressure of ShAPE process is at least two times less than that required for conventional extrusion. We used optical microscopy to inspect and validate the integrity of extrudates. It shows that the microstructure was refined and dynamically recrystallized to equiaxial grains. Compared to the annealed copper wire, ShAPE processed wire has 80% higher yield strength, 15% higher ultimate tensile strength and 20% higher ductility. These were correlated with refined grain size and sub-structuring observed via electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM).

Copper, Wire, Shear Assisted Processing and Extrus↗

Laser wire beam profile monitor in the Spallation Neutron Source (SNS) superconducting linac

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory is an accelerator based neutron scattering facility. The SNS uses the large scale high energy superconducting linac (SCL) to provide high beam power utilizing hydrogen ion (H-) beams. For the diagnostics of high-brightness H- beam in the SCL, nonintrusive methods have to be developed. This paper describes design, implementation, theoretical analysis and experimental demonstration of a nonintrusive profile monitor system based on photodetachment, also known as laser wire, installed in the SNS-SCL. The SNS laser wire system is the largest of its kind with a capability of measuring both horizontal and vertical profiles of an operational H- beam at each of the 23 cryomodule stations along the SCL beam line by employing a single light source. Presently 9 laser wire stations have been commissioned which measures H- beam profiles at 9 different locations corresponding to energy levels of 200 MeV to 1 GeV. The laser wire diagnostics has no moving parts inside the beam pipe, causes no contamination on the superconducting surface, and can be run parasitically on an operational neutron production H- beam.

43 PARTICLE ACCELERATORS↗

A momentum source model for wire-wrapped rod bundles—Concept, validation, and application

Large uncertainties still exist in the treatment of wire-spacers and drag models for momentum transfer in current lumped parameter models. Here, to improve the hydraulic modeling of wire-wrap spacers in a rod bundle, a three-dimensional momentum source model (MSM) has been developed to model the anisotropic flow without the need to resolve the geometric details of the wire-wraps. The MSM is examined for 7-pin and 37-pin bundles steady-state simulations using the commercial CFD code STAR-CCM+. The calculated steady-state inter-subchannel cross flow velocities match very well in comparisons between bare bundles with the MSM applied and the wire-wrapped bundles with explicit geometry. The validity of the model is further verified by mesh and parameter sensitivity studies. Furthermore, the MSM is applied to a 61-pin EBR-II experimental subassembly for both steady state and PLOF transient simulations. Reasonably accurate predictions of temperature, pressure, and fluid flow velocities have been achieved using the MSM for both steady-state and transient conditions. Significant computing resources are saved with the MSM since it can be used on a much coarser computational mesh.

42 ENGINEERING↗

One-way coupled simulation of FIV in a 7-pin wire-wrapped fuel pin bundle

A normal fuel geometry found in sodium cooled reactor designs is the hexagonal lattice of wire-wrapped fuel pins. The wire-wrappers, which replace the more common spacer grids, act as a spacer between the fuel pins, while simultaneously increasing the fluid mixing between subchannels. The induced transverse flow, while good for mixing, increases the force load experienced by the fuel pins, increasing the possibility of problematic flow induced vibrations. The primary source of vibrations is turbulent buffeting, so very small in amplitude, but capable of rupturing the fuel cladding by fretting. The vast majority of research on fretting has been for bare rods with spacer grids. There are several significant ways that wire-wrapped fuel pins differ from bare rods that may have significant impact on the vibrations present. The increased transverse flow and asymmetrical flow pattern may result in larger and imbalanced force loads on the pins. The helical bracing of each pin may result in unique vibration patterns, and gaps may form between pins affecting how they are braced. Simulation allows for the observation of the forces present, how the flow field affects these forces, and how the structure responds and can be repeated for multiple cases for relatively low cost. Here, simulation of the flow induced vibrations for a 7-pin wire-wrapped fuel pin bundle is carried out by coupling Nek5000, a spectral element LES/DNS solver with DIABLO, a finite element CSM solver. The small amplitude vibrations allow for the assumption that the structure motion has negligible effect on the fluid flow, permitting the much less computationally expensive one-direction coupling. In order to gather significant force history data for the 2.63 helical pitch structure, a scheme was developed to artificially create force history from the power spectrum density of the one-pitch CFD simulation forces. The vibrations could then be simulated in the structure multiple times varying the contact and gaps between various pins. This provides for the search of worst-case scenarios and informs about the types of fretting that might be present. The simulation geometry is based on an experiment for comparison. However, the viscosity of the simulation was increased by a factor of four to make the simulation computationally feasible. While validation is not possible, comparisons are still valuable.

42 ENGINEERING↗

Implosion dynamics and K-shell x-ray generation in large diameter stainless steel wire array Z pinches with various nesting configurations

Nested stainless steel wire array variations were investigated on the 20 MA Z machine [R. B. Spielman et al., Phys. Plasmas 5, 2105 (1998)]. In order to reach experimentally observed electron temperatures near 3.8 keV and excite the K shell, these {approx}6.7 keV photon energy x-ray sources must be of large initial diameter (45-80 mm) which poses a concern for magnetic Rayleigh-Taylor instability growth. We discuss the implosion dynamics in these large diameter wire arrays, including an analysis of the ablation phase indicating that the prefill material is snowplowed at large radius. Nested array configurations with various mass and radius ratios are compared for instability mitigation and K-shell scaling. Degradation of the K-shell x-ray power and yield was observed for shots that did not have simultaneous implosion of the outer and inner wire arrays. Shots that were designed per this constraint exhibited K-shell yield scaling consistent with the model of J. W. Thornhill et al. [IEEE Trans. Plasma Sci. 34, 2377 (2006)] which had been benchmarked to single array results. This lends confidence to K-shell yield predictions using this model for future shots on the refurbished Z machine. Initial results employing a triple nested wire array to stabilize the large diameter implosion are also reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantitative Analysis of Plasma Ablation Using Inverse Wire Array Z-pinches

An inverse (exploding) wire array configuration, in which the wires form a cylinder around a current carrying electrode on axis, was used to study the ablation phase of the pinch. This configuration allows the parameters of the plasma from individual wires of the array to be measured as the ablated plasma streams propagate in the outward radial direction. The density distribution and the evolution of the natural mode of modulation of the ablation was measured with interferometry and soft x-ray imaging. Measurements of the voltage across the array, which in this configuration is determined by the private magnetic flux around the individual wires, allows information on the localisation of the current to be obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physics of Multi-Planar and Compact Cylindrical Wire Arrays Implosions on University-Scale Z-pinch Generators

The presented research focuses on investigation of Z-pinch plasma formation, implosion, and radiation characteristics as a function of the load configuration. The single planar and multi-planar wire arrays as well as compact cylindrical wire arrays were studied on the 1.3 MA UNR Zebra and 1 MA Cornell COBRA generators. The largest yields and powers were found for W and Mo double planar and compact wire arrays. A possibility of radiation pulse shaping was demonstrated. Two types of bright spots were observed in plasmas. A comparison of Mo double planar and compact wire array data indicates the possibility that the same heating mechanism operates during the final implosion and stagnation stages.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

3D MHD Simulations of Radial Wire Array Z-pinches

Recent experiments carried out on the MAGPIE (1 MA, 250 ns), OEDIPE (730 kA, 1.5 {mu}s) and SPHINX (4 MA, 700 ns)[1] facilities have shown the relatively high level of scalability of the Radial Wire Array Z-pinches. These configurations where the wires stretch radially outwards from a central cathode offer numerous advantages over standard cylindrical arrays. In particular, imploding in a very stable and compact way, they seem suitable for coupling to small scale hohlraums. Making use of the 3D resistive magneto-hydrodynamic code GORGON[2] developed at Imperial College, the dynamic of the radial wire arrays is investigated. Influence of the cathode hotspots and wires angle on the x-ray emissions is also discussed. Comparison with experiments is offered to validate the numerical studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Field Measurements in Wire-Array Z-Pinches using Magneto-Optically Active Waveguides

Understanding the magnetic field topology in wire-array Z-pinches as a function of time is of great significance to understanding these high-energy density plasmas especially for their ultimate application to stockpile stewardship and inertial confinement fusion. We are developing techniques to measure magnetic fields as a function of space and time using Faraday rotation of a single longitudinal mode (SLM) laser through a magneto-optically active bulk waveguide (multicomponent terbium borate glass) placed adjacent to, or within, the wire array in 1 MA experiments. We have measured fields >10 T with 100 ns rise times outside of a wire-array for the entire duration of the current pulse and as much as {approx}2 T inside a wire-array for {approx}40 ns from the start of current. This is the first time that such rapidly varying and large fields have been measured using these materials. In a dense Z-pinch, these sensing devices may not survive for long but may provide the magnetic field at the position of the sensor that can be used to corroborate magnetic probes, with which we compare our results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of K-Shell Al and Mg and L-Shell Mo Radiation from Compact Cylindrical Wire Array Plasmas Produced on the 1 MA UNR Zebra Generator

K-shell radiation of Al and Mg and L-shell radiation of Mo from implosions of compact cylindrical wire arrays (CCWA) on the 1 MA UNR Zebra generator was studied. Specifically, radiation from implosions of 3 and 6 mm CCWA with (16-24) Al-5052 (95% Al and 5% Mg) and Al-5052 (97.5% Al and 2.5% Mg) and Mo wires was analyzed using the full set of diagnostics: PCD and current signals, and X-ray pinhole images and spectra. Previously developed non-LTE models were applied to model spatially resolved time integrated as well as time-gated spatially integrated spectra from Al, Mg, and Mo plasmas. Derived electron temperature and density spatial gradients as well as percentage of radiating mass were studied and compared. In addition, the novel Wire Dynamics Model (WDM) was used to analyze the implosion dynamics of compact wire array loads.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE WIRE ARRAY Z-PINCH: AN EFFICIENT X-RAY SOURCE FOR ICF AND A NEW ION HEATING MECHANISM

The Z-pinch provides an efficient x-ray source for driving a hohlraum for inertial confinement fusion. The basic physics of wire-array implosions is reviewed. It can be understood in several sequential stages. First, the wires heat and form a surrounding vapor which ionizes, causing the current to transfer to this lower resistance. The JxB global force leads to ejection of this plasma towards the axis to form a precursor plasma. The wire cores continue to ablate due to the heat flux from the Joule-heated nearby plasma. The cooling of this plasma by the wire-cores leads to a low magnetic Reynolds number so that the precursor plasma carries little or no current. When gaps appear in the liquid/vapor cores the plasma temperature and Reynolds' number rise and this plasma accelerates in towards the axis carrying the current. This is the main implosion, and it sweeps up earlier ablated plasma, which acts to reduce Rayleigh-Taylor growth. At stagnation the ion kinetic energy is thermalised and equipartition heats the electrons, which then radiate in a 5 ns pulse. In some conditions the energy radiated as soft x-rays exceeds the ion kinetic energy by a factor of 3 or 4. A theory has been developed to explain this in which fine-scale, fast growing m = 0 MHD instabilities grow to saturation, viscous dissipation of which leads to ion heating, followed by equipartition. World record ion temperatures of 2 to 3 billion Kelvin were predicted, and measured at Sandia National Laboratory. Lastly progress in capsule implosions and in application to inertial fusion energy is reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Axial x-ray backlighting of wire-array Z-pinches using X pinches

For the first time, a geometry has been developed to allow for an axial imaging system for wire-array Z-pinch experiments that produce high-resolution x-ray images. The new geometry required a significant redesign of the electrode hardware. Calibrated areal density measurements of the Z-pinch plasma including wire cores, coronal plasma, streaming plasma, and the precursor were obtained. The system used eight-wire molybdenum (Mo) X pinches in series with and directly below the Z-pinch axis to provide micron-scale x-rays sources for point-projection radiography. The images formed on the x-ray sensitive film had a 15 mm diameter field of view at the center height of the array and a magnification of about 7.5:1. Titanium (Ti) filters in front of the film transmitted radiation in the spectral range of 3-5 keV. For calibration, a separate film with the same thickness Ti filter was placed the same distance from the X pinch. This film had an unobstructed path that bypasses the Z-pinch but included step wedges for calibration of the Z-pinch plasma. The step wedges had thicknesses of tungsten (W) ranging from 0.015 to 1.1 {mu}m to obtain areal density measurements of the W plasma from the wire-array. Images had subnanosecond temporal resolution and about 10 {mu}m spatial resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulated plasma immersion ion implantation processing of thin wires

In plasma immersion ion implantation, the dependencies of sheath expansion and ion flux density on substrate geometry are well established. However, effects of extreme diameter variations have not been investigated explicitly. Using an analytical simulation code assuming an infinite mean free path, the sheath expansion, ion flux density, and resulting substrate temperature are explored down to wire diameters of 150 {mu}m. Comparing the results for planar substrates and cylindrical, thin wires, a reduction in the sheath width up to a factor of 10, a faster establishing of a new equilibrium sheath position, and an increase in the ion fluence by a factor of 100 is encountered. The smaller plasma sheath allows for a denser packing of wires during the treatment than for planar substrates. Additionally, the implantation time is reduced, allowing a fast wire transport through the chamber, further increasing the throughput.

36 MATERIALS SCIENCE↗

Evaluation of electrical conductivity and equations of state of non-ideal plasma through microsecond timescale underwater electrical wire explosion

Experimental and simulation results of underwater electrical Cu, Al, and W wire explosions in the microsecond timescale are presented. It was shown that the electrical conductivity results for Cu and Al agree well with modified Lee-More and quantum molecular dynamic models for temperatures above 10 kK. The equation of state (EOS) values based on SESAME tables for Cu and Al were slightly modified for intermediate temperatures in order to obtain fitting between experimental and simulated exploding wire radial expansion. Also, it was shown that the electrical conductivity results and the EOS evaluation differ significantly from the results obtained in nanosecond timescale experiments. Finally, it was found that underwater electrical W wire explosion is characterized by the appearance of non-uniformities along the z-axis of the wire. This phenomena adds uncertainty to the possibility of applying this type of experiments for evaluation of the electrical conductivity and EOS of W.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗