Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Toroidal Field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Versatile multi-energy hard x-ray camera to study confined and unconfined fast electron dynamics and anisotropies (Invited)

A powerful and flexible hard x-ray (HXR) camera has been recently installed and tested on the WEST tokamak (CEA, France) in collaboration with the Princeton Plasma Physics Laboratory. The diagnostic is a pinhole camera fielded with a 2D pixel detector equipped with a 1 mm thick CdTe sensor. The novelty of this diagnostic technique is the detector’s capability of adjusting the threshold energy at the pixel level. This innovation provides great flexibility in the energy configuration, allowing simultaneous space, energy, and time resolved x-ray measurements. The novel camera has been used to measure the core radiation from non-Maxwellian (fast) electrons accelerated by Lower Hybrid (LH) waves and also the beam–target emission of tungsten in the divertor region produced by fast electron losses interacting with the target. In addition, anisotropic hard x-ray emission has been detected for the first time at the WEST core and edge plasma, with opposite toroidal intensity trends. Finally, experimental vertical and toroidal HXR profiles have been successfully reproduced with the LH code LUKE.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

MHD modeling of shattered pellet injection in JET

Abstract Nonlinear 3D MHD simulations of shattered-pellet injection (SPI) in JET show prototypical SPI-driven disruptions using the M3D-C1 and NIMROD extended-MHD codes. Initially, radiation-driven thermal quenches are accelerated by MHD activity as the pellet crosses rational surfaces, leading to a radiation spike, global stochasticization of the magnetic field, and a complete thermal quench. Eventually, current quenches, preceded by a current spike are seen as the Ohmic heating becomes equal to the radiative cooling. The results are qualitatively similar for both a single monolithic pellet, pencil-beam model, and a realistic shatter to represent the SPI plume. A scan in viscosity from 500 to 2000 m 2 s −1 for MHD simulations finds that reducing viscosity increases MHD activity and decreases thermal quench time slightly. A realistic cloud of fragments modeling shows that mixed-D–Ne pellet travels deeper into the plasma core before the thermal quench. At the slow pellet speeds, the pellet is found to be moving slowly enough inward that even the 5% neon in the mixed pellet is enough to effectively radiate the thermal energy available. Radiation toroidal peaking is predicted to be at levels consistent with experimental observations and reduced as the pellet travels deeper into the plasma. These simulations lay the ground work for more-sophisticated validative and predictive modeling of SPI in JET using both M3D-C1 and NIMROD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Sparsified time-dependent Fourier neural operators for fusion simulations

This paper presents a sparsified Fourier neural operator for coupled time-dependent partial differential equations (ST-FNO) as an efficient machine learning surrogate for fluid and particle-based fusion codes such as NIMROD (Non-Ideal Magnetohydrodynamics with Rotation - Open Discussion) and GTC (Gyrokinetic Toroidal Code). ST-FNO leverages the structures in the governing equations and utilizes neural operators to represent Green's function-like numerical operators in the corresponding numerical solvers. Once trained, ST-FNO can rapidly and accurately predict dynamics in fusion devices compared with first-principle numerical algorithms. In general, ST-FNO represents an efficient and accurate machine learning surrogate for numerical simulators for multi-variable nonlinear time-dependent partial differential equations, with the proposed architectures and loss functions. The efficacy of ST-FNO has been demonstrated using quiescent H-mode simulation data from NIMROD and kink-mode simulation data from GTC. The ST-FNO H-mode results show orders of magnitude reduction in memory and central processing unit usage in comparison with the numerical solvers in NIMROD when computing fields over a selected poloidal plane. The ST-FNO kink-mode results achieve a factor of 2 reduction in the number of parameters compared to baseline FNO models without accuracy loss.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Calculation of collisionless pitch-angle scattering of runaway electrons with synchrotron radiation via high-order guiding-centre equation

Recently, the collisionless pitch-angle scattering for relativistic runaway electrons (REs) in toroidal geometries such as tokamaks was discovered through a full orbit simulation approach (Liu et al., Nucl. Fusion, vol. 56, 2016, p. 064002), and it was then theoretically investigated that a new expression for the magnetic moment, including the second-order corrections, could essentially reproduce the so-called collisionless pitch-angle scattering process (Liu et al., Nucl. Fusion, vol. 58, 2018, p. 106018). In this paper, with synchrotron radiation, extensive numerical verification of the validity of the high-order guiding-centre theory is given for simulations involving REs by incorporating such an expression for the magnetic moment into our particle tracing code. A high-order guiding-centre simulation approach with synchrotron radiation (HGSA) is applied. Synchrotron radiation plays an essential role in the life cycle of REs. The energy of REs first increases and then becomes saturated until the electric field acceleration is balanced by the radiation dissipation. Unfortunately, the process cannot be simulated accurately with the standard guiding-centre model, i.e. the first-order guiding-centre model. Remarkably, it is found that the HGSA can effectively produce the fundamental process of REs. Since the time scale of the energy saturation of REs is close to seconds, the computational cost becomes significant. In order to save costs, it is necessary to estimate the time of energy saturation. An analytical estimate is derived for the time it takes for synchrotron drag to balance an accelerating electric field and the provided formula has been numerically verified. Finally, test calculations reveal that HGSA is favourable for exploiting the dynamics of REs in tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

An E and B gyrokinetic simulation model for kinetic Alfvén waves in tokamak plasmas

The gyrokinetic particle simulation is a powerful tool for studies of transport, nonlinear phenomenon, and energetic particle physics in tokamak plasmas. While most gyrokinetic simulations make use of the scalar and vector potentials, a new model (GK-E&B) has been developed by using the E and B field in a general form and has been implemented in simulating kinetic Alfvén waves in uniform plasma. In our work, the Chen et al. GK-E&B model has been expressed, in general, tokamak geometry using the local orthogonal coordinates and general tokamak coordinates. Its reduction for uniform plasma is verified, and the numerical results show good agreement with the original work. The theoretical dispersion relation and numerical results in the local model in screw pinch geometry are also in excellent agreement. Numerical results show excellent performance in a realistic parameter regime of burning plasmas with high values of β/(M e k$^{2}_{⊥}$ρ$^{2}_{i}$), which is a challenge for traditional methods due to the “cancellation” problem. As one application, the GK-E&B model is implemented with kinetic electrons in the local single flux surface limit. With the matched International Tokamak Physics Activity-Toroidicity-induced Alfvén Eigenmodes parameters adopted, numerical results show the capability of the GK-E&B in treating the parallel electron Landau damping for realistic tokamak plasma parameters. As another application, the global GK-E&B model has been implemented with the dominant electron contribution in the cold electron limit. Its capability in simulating the finite E || due to the finite electron mass is demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

On the relationship between the multi-region relaxed variational principle and resistive inner-layer theory

We show that the variational energy principle of the multi-region relaxed magnetohydrodynamic (MRxMHD) model can be used to predict finite-pressure linear tearing instabilities. In this model, the plasma volume is sliced into sub-volumes separated by 'ideal interfaces', and in each volume the magnetic field relaxes to a Taylor state, where the pressure gradient $\nabla p = 0$. The MRxMHD model is implemented in the Stepped-Pressure Equilibrium Code (SPEC) so that the equilibrium solution in each region is computed while preserving the force balance across the interfaces. As SPEC computes the Hessian matrix (a discretized stability matrix), the stability of an MRxMHD equilibrium can also be computed with SPEC. In this article, using SPEC, we investigate the effect of local pressure gradients and the $\nabla p = 0$ in the vicinity of the resonant surface of a tearing mode. For low-beta plasma, we have been able to illustrate a relationship between the resistive singular-layer theory (Coppi et al 1966 Nucl. Fusion6 101; Glasser et al 1975 Phys. Fluids18 875–88) and the MRxMHD model. Within the singular layer, the volume-averaged magnetic helicity and the flux-averaged toroidal flux are shown to be the invariants for the linear tearing modes in SPEC simulations. Our technique to compute MRxMHD stability is first tested numerically in a cylindrical tokamak and its application in toroidal geometry is demonstrated. We demonstrate an agreement between the stability boundary obtained with SPEC simulation and the resistive inner-layer theories.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

An improved theory of the response of DIII-D H-mode discharges to static resonant magnetic perturbations and its implications for the suppression of edge localized modes

The plasma response to an externally generated, static, n = 2, resonant magnetic perturbation (RMP) in the pedestal region of DIII-D H-mode discharge #158115 is investigated using a toroidal generalization of the asymptotic matching model presented by Fitzpatrick [Phys. Plasmas 27, 042506 (2020)]. Just as in a recent paper [Q. M. Hu et al., Phys. Plasmas 26, 120702 (2019)], it is hypothesized that the density pump-out phenomenon is due to locked magnetic island chains induced at the bottom of the pedestal, whereas the suppression of edge localized modes is associated with a locked magnetic island chain induced at the top of the pedestal. Neutral penetration inside the last closed magnetic flux-surface is found to have a significant influence on locked magnetic island chain formation at the bottom of the pedestal. It is found that locked island formation at the top of the pedestal is only possible when q95 lies in certain narrow windows. Finally, it is inferred that, in order to successfully induce a locked island chain at the top of the pedestal, an external RMP field-coil system must generate a magnetic field that is simultaneously strongly amplified by the plasma (via the ideal kink response) and has a large resonant component at a rational surface that lies close to the top of the pedestal.

Fitzpatrick, R. (ORCID:0000000162379309)↗
DOE OSTI2021

Pellet triggering of edge localized modes in low collisionality pedestals at DIII-D

Edge localized modes (ELMs) are triggered using deuterium pellets injected into plasmas with ITER-relevant low collisionality pedestals, and the resulting peak ELM energy fluence is reduced by approximately 25%–50% relative to natural ELMs destabilized at similar pedestal pressures. Cryogenically frozen deuterium pellets are injected from the low-field side of the DIII-D tokamak at frequencies lower than the natural ELM frequency, and heat flux is measured by infrared cameras. Ideal MHD pedestal stability calculations show that without pellet injection, these low collisionality pedestals were limited by their current density (peeling-limited) rather than their pressure gradient (ballooning-limited). ELM triggering success correlates strongly with pellet mass, consistent with the theory that a large pressure perturbation is required to trigger an ELM in low collisionality discharges that are far from the ballooning stability boundary. For sufficiently large pellets, both instantaneous and time-integrated ELM energy deposition measured by infrared cameras is reduced with respect to naturally occurring ELMs at the inner strike point, which is the position where it is largest for natural ELMs. Energy fluence at the outer strike point is less effected. Cameras observing both heat flux and D-alpha emission often find significant toroidally asymmetric striations in the outboard far scrape-off layer resulting from ELMs that are triggered by pellets. Toroidal asymmetries at the inner strike point are similar between natural and pellet-triggered ELMs, indicating that the reduction in peak heat flux and total fluence at that location is robust for the conditions reported here.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Prospects for H-mode inhibition in negative triangularity tokamak reactor plasmas

Instability to high toroidal mode number ($\textit{n}$) ballooning modes has been proposed as the primary gradient-limiting mechanism for tokamak equilibria with negative triangularity (NT) (δ) shaping, preventing access to strong H-mode regimes when δ is sufficiently negative. To understand how this mechanism extrapolates to reactor conditions, we model the infinite-$\textit{n}$ ballooning stability as a function of internal profiles and equilibrium shape using a combination of the CHEASE and BALOO codes. While the critical δ required for avoiding 2nd stability to high-$\textit{n}$ modes is observed to depend in a complicated way on various shaping parameters, including the equilibrium inverse aspect ratio, elongation and squareness, equilibria with NT are robustly prohibited from accessing the 2nd stability region, offering the prediction that NT reactors should maintain L-mode-like operation. In order to access high-$\textit{n}$ 2nd stability, the local shear over the entire bad curvature region must be sufficiently negative to overcome curvature destabilization on the low field side. Finally, scalings of the ballooning-limited pedestal height are provided as a function of plasma parameters to aid future scenario design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Fluid Flow Observations of The Spray Near-Field Using High-Speed X-Ray Imaging

Sprays are important to may industrial processes, but the near-field region where spray formation takes place is difficult to visualize and characterize through visible light imaging because this region is typically optically dense. X-ray imaging is one technique that can penetrate this optically dense region and provide unique observations of the spray formation process. This study uses high-speed white beam X-ray imaging conducted at the Advanced Photon Source to capture spray formation dynamics from a canonical airblast atomizer. In this work, a range of momentum flux ratios are visualized by varying the gas flow rate while the liquid flow rate is held constant. The use of X-rays show overlapping flow structures including bags, ligaments, mushrooms, and webs. Air bubbles are captured within the liquid regions, and a very dynamic crown forms at the liquid needle exit at higher momentum flux ratios. Finally, at the highest momentum flux ratios, air bubbles and liquid droplets are observed migrating upstream in the center of the crown, and this motion is attributed to a toroidal recirculation cell at the nozzle exit.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Recent progress in the design of the K-DEMO divertor

The preliminary conceptual design of the Korean fusion demonstration reactor (K-DEMO) with a major radius of 6.8 m and the fusion power of 2200 MW has been studied since 2012. The overall configuration of the K-DEMO divetor system based on the ITER-like water-cooled tungsten technology is a double-null type symmetric divertor subdivided into 32 toroidal modules for the vertical maintenance. A detached divertor scenario with impurity seeding was considered as the primary approach for the power exhaust to reduce the peak heat flux lower than the engineering limit of 10 MW/m 2 . The power exhaust performance at the scrap off layer was estimated by using UEDGE-2D code, a two-dimensional fluid transport code for collisional edge plasma and neutral species like N, Ne, and Ar. Particle and heat flux on inboard and outboard divertor targets were calculated for the detached cased depending on parameters such as the impurity seeding rate, pumping rate, and the pedestal density. On the other hand, a magnetic solution like X-divertor, snowflake divertor, and super X-divertor to expand the plasma wet area was considered for K-DEMO since the detached divertor increasing a radiation fraction by impurity seeding might be able to be unstable. However, the extremely high current of poloidal coils was required more than the engineering limit, 20 MA, to form magnetic field lines for the alternative divertors. Based on the physical calculation of the edge plasma, engineering analyses were carried out to find out the thermal and structural reliability. The thermo-hydraulic analysis confirmed thermal stability, whether all comprising materials are operating within their allowable temperature windows when the case of the peak heat flux is set to 10 MW/m 2 on the outboard divertor target. The response surface optimization method derived two optimal design candidates employing two kinds of heat sink materials, respectively: the reduced activation ferritic martensitic (RAFM) steel and CuCrZr alloy. Additionally, the drawbacks and merits of the two materials were definite. The optimal design with applying RAFM steel was vulnerable to withstand thermal and mechanical loads since low thermal conductivity caused too thin thickness of the heat sink. On the other hand, the CuCrZr alloy has critical drawbacks in terms of activation and radioactive waste despite its high thermal conductivity. Meanwhile, preliminary electromagnetic (EM) analysis was carried out to estimate the EM loads caused by the abnormal behaviors of plasma since EM loads are one of the most critical external loads for designing a DEMO divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Interplay between beam-driven chirping modes and plasma confinement transitions in spherical tokamak ST40

Experiments on the high field spherical tokamak ST40 have led to the recent observation of interplay between beam-driven modes of sweeping frequency (chirping modes) and transitions to the enhanced global confinement regime (H-mode) and back to the low confinement regime (L-mode). The H-modes of plasma confinement are identified from decreased intensity of D α signal and from clear distinctions in the edge gradients of the visible plasma boundary (observed as a sharp plasma edge in camera images). The beam-driven chirping modes, identified as ideal magnetohydrodynamics beta-induced Alfvén acoustic eigenmodes modes, are observed in Mirnov coil signals, interferometry, and soft x-ray diagnostics. A moderate amplitude ‘primer’ chirping mode usually precedes an H–L transition. This is followed by a ‘dominant’ chirping mode with higher amplitude during the L-mode. The L–H transition back to the improved confinement occurs on a longer time scale of tens of ms, consistent with the slowing down time scale of fast beam ions. A dramatic decrease in toroidal plasma rotation is systematically observed associated with chirping modes sweeping down to zero frequency. Resonance maps built for the beam-driven chirping modes with the ASCOT (accelerated simulation of charged particle orbits in torodoial devices) code show that the resonant beam ions have orbits near the trapped-passing boundary. The ASCOT modelling assesses how losses of the resonant fast ions caused by the chirping modes with high enough amplitude modify the torque, potentially affecting the plasma rotation.

magnetic confinement fusion↗
DOE OSTI2021

Nonlinear two-fluid modeling of plasma response to RMPs for the ELM control in the ITER baseline

Numerical modeling, combining the toroidal ideal MHD code GPEC and the nonlinear two-fluid MHD code TM1, was used for comprehensive studies of the plasma response to resonant magnetic perturbations (RMPs) with toroidal mode number n = 1–5 for controlling edge-localized modes (ELMs) in ITER for the standard operation scenario (15 MA Q = 10). Several issues related to RMP ELM control are investigated, including the optimization of the RMP coils configuration, the evaluation of the magnitude of density pump-out and the q95 windows of ELM suppression. GPEC calculates the magnetic response, which consistently includes the very important edge kink/peeling response to static magnetic perturbations. Furthermore, GPEC two-dimensional scans of the relative coil current phasing among the three rows of internal coils, at fixed coil current amplitude, reveal the optimal phasing for the RMP coil configuration with n = 1–5, respectively. The poloidal half wavelength of resonant mode at the edge of plasma calculated by GPEC indicates that the midplane row coils have the best resonant coupling with the plasma for n = 2, while the upper and lower row coils have the best resonant coupling with the plasma for n = 3. Based on the plasma kinetic equilibrium and the GPEC calculations of the magnetic response, TM1 was used to simulate the conditions for RMP field penetration in the ITER pedestal. TM1 shows magnetic island formation at the foot of ITER pedestal with RMP coil current threshold ranging from 4 kAt to 8 kAt with n = 2 to 4. These magnetic islands at the pedestal-foot lead to density pump-out, the magnitude of which scales as ${I}_{\text{RMP}}^{0.5}$ and ranges from 5% to 20% at the pedestal-top when scanning the coil current from 4 to 60 kAt. The density pump-out is found to be weaker for higher n RMP. The nonlinear TM1 simulations also show field penetration at the pedestal-top, where the threshold of RMP coil current depends on the q 95 . The alignment of the magnetic island and the location of the pedestal-top decreases the height and width of the pedestal to suppress ELMs. Simulations by two-dimensional scans of RMP coil current and q 95 reveal the accessible q 95 windows of ELM suppression for both n = 3 and 4 RMPs. The predicted q 95 windows of ELM suppression are very similar to the ones in currently operating tokamaks and the required RMP coil current for ELM suppression is less than 40–50 kAt, which is well within the designed capability for ITER. In addition, the simulations indicate that wide q 95 windows of ELM suppression may be accessible in ITER by operating with dominant n = 4 (or n = 5) RMPs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Guiding center equations for the magnetic dipole

Since the discovery of Van Allen radiation belts in the 1960s, observations of energetic ions trapped in the Earth's dipole magnetic field have illustrated the remarkable confinement properties of this configuration. As such, it has been used for confining a hot plasma for nuclear fusion studies, starting from the pioneering work of Bo Lehnert and Akira Hasegawa, in the Levitated Dipole Experiment (LDX) at MIT until 2011 and in the RT-1 experiment at the University of Tokyo. More recently, the dipole has been subject to a renewed interest for fusion studies by a couple of startups and for smaller applications as a cold plasma source. While the equilibrium and magneto-hydrodynamic stability of the dipole have been investigated quite in detail, neoclassical properties of the dipole are comparatively much less known: the dipole is more known in geophysics than in fusion science. For this reason, in this paper, we propose a set of Hamiltonian, guiding-center equations to describe the motion of electrons and ions in a magnetic dipole configuration. We also developed a code, and we show the main features of particle motion, benchmarking our results with the analytical solutions for the bounce and precession motion, which are well documented in the literature. We also draw some general conclusions for the neoclassical transport in usual toroidal confinement schemes, such as the tokamak and the stellarator, pointing out the unique advantages of the dipole in confining energetic particles.

Hamiltonian mechanics↗
DOE OSTI2020

Energy-Casimir, dynamically accessible, and Lagrangian stability of extended magnetohydrodynamic equilibria

The formal stability analysis of Eulerian extended magnetohydrodynamics (XMHD) equilibria is considered within the noncanonical Hamiltonian framework by means of the energy-Casimir variational principle and the dynamically accessible stability method. Specifically, we find explicit sufficient stability conditions for axisymmetric XMHD and Hall MHD (HMHD) equilibria with toroidal flow and for equilibria with arbitrary flow under constrained perturbations. The dynamically accessible, second-order variation of the Hamiltonian, which can potentially provide explicit stability criteria for generic equilibria, is also obtained. Moreover, we examine the Lagrangian stability of the general quasineutral two-fluid model written in terms of MHD-like variables, by finding the action and the Hamiltonian functionals of the linearized dynamics, working within a mixed Lagrangian-Eulerian framework. Upon neglecting electron mass, we derive a HMHD energy principle, and in addition, the perturbed induction equation arises from Hamilton’s equations of motion in view of a consistency condition for the relation between the perturbed magnetic potential and the canonical variables.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Microtearing modes as the source of magnetic fluctuations in the JET pedestal

Abstract We report on a detailed study of magnetic fluctuations in the JET pedestal, employing basic theoretical considerations, gyrokinetic simulations, and experimental fluctuation data to establish the physical basis for their origin, role, and distinctive characteristics. We demonstrate quantitative agreement between gyrokinetic simulations of microtearing modes (MTMs) and two magnetic frequency bands with corresponding toroidal mode numbers n = 4 and 8. Such disparate fluctuation scales, with substantial gaps between toroidal mode numbers, are commonly observed in pedestal fluctuations. Here we provide a clear explanation, namely the alignment of the relevant rational surfaces (and not others) with the peak in the ω * profile, which is localized in the steep gradient region of the pedestal. We demonstrate that a global treatment is required to capture this effect. Nonlinear simulations suggest that the MTM fluctuations produce experimentally-relevant transport levels and saturate by relaxing the background electron temperature gradient, slightly downshifting the fluctuation frequencies from the linear predictions. Scans in collisionality are compared with a simple MTM dispersion relation. At the experimental points considered, MTM growth rates can either increase or decrease with collision frequency depending on the parameters thus defying any simple characterization of collisionality dependence.

Physics↗
DOE OSTI2021

Toroidal modeling of runaway avalanche in DIII-D discharges

Abstract A toroidal modeling tool is developed to study the runaway electron (RE) avalanche production process in tokamak plasmas, by coupling the Rosenbluth–Putvinski avalanche model (Rosenbluth and Putvinski 1997 Nucl. Fusion 37 1355) with an n = 0 magneto-hydrodynamic (MHD) solver. Initial value numerical simulations are carried out for two DIII-D discharges with different plasma shapes (one near circular, and the other with high elongation). It is found that, assuming the same level of about 1% seed current level, the Rosenbluth–Putvinski model somewhat underestimates the RE plateau current for the circular-shaped plasma, as compared with that measured in DIII-D experiments. For an elongated, higher current plasma, simulations find strong runaway current avalanche production despite the lack of measured plateau RE current in experiments. A possible reason for this discrepancy is a lack of additional RE dissipation physics in the present two-dimensional model. Systematic scans of the plasma boundary shape, at fixed pre-disruption plasma current, find that the plasma elongation helps to reduce the RE avalanche production, confirming recent results obtained with an analytic model (Fülöp et al 2020 J. Plasma Phys. 86 474860101). The effect of the plasma triangularity (either positive or negative), on the other hand, has a minor effect. On the physics side, the avalanche process involves two competing mechanisms associated with the electric field. On the one hand, a stronger electric field produces a higher instantaneous avalanche growth rate. On the other hand, a fast growing RE current quickly reduces the fraction of the conduction current together with the electric field, and hence a faster dissipation of the poloidal flux. As a final result of these two dynamic processes, the runaway plateau current is not always the largest with the strongest initial electric field. These results lay the foundation for future self-consistent inclusion of the MHD dynamics and the RE amplification process.

Physics↗
DOE OSTI2020

Asymptotic solutions and convergence studies of the resistive inner region equations

A recent publication presents a detailed prescription for constructing global eigenfunctions and complex growth rates for resistive instabilities in axisymmetric toroidal systems, using the method of matched asymptotic expansions. At each singular surface in the plasma, the small-x asymptotic solutions of the ideal MHD outer-region equations are matched to the large-x asymptotic solutions of the resistive inner-region equations, with x being the distance from the singular surface. The success of this method depends upon accurate asymptotic solutions of the resistive inner region equations. Extensive studies have shown that there are not only regimes of excellent agreement with straight-through methods, without asymptotic matching, but also regimes of strong disagreement. As such, in an effort to find the cause of this discrepancy, we present here a different method of constructing asymptotic solutions of the inner region equations and we study the convergence properties of the new and old solutions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗