Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIMING PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Pulsed Electrical Spin Injection into InGaAs Quantum Dots: Studies of the Electroluminescence Polarization Dynamics

We present time-resolved studies of the spin polarization dynamics during and after initialization through pulsed electrical spin injection into InGaAs quantum dots embedded in a p-i-n-type spin-injection light-emitting diode. Experiments are performed with pulse widths in the nanosecond range and a time-resolved single photon counting setup is used to detect the subsequent electroluminescence. We find evidence that the achieved spin polarization shows an unexpected temporal behavior, attributed mainly to many-carrier and non-equilibrium effects in the device.

36 MATERIALS SCIENCE↗

Finite element analysis of ring-shaped emission profile in plasma bullet

Using a one-way coupled model of neutral gas flow and plasma dynamics we report a mechanism to explain the ring-shaped emission pattern that has been observed experimentally in plasma bullets at atmospheric pressure. We solve a fluid model with the local field approximation in one-dimensional cylindrical coordinates, corresponding to a cross-section of a plasma bullet. Pulselike uniform electric field is assumed to be applied perpendicular to the simulation domain. Time and spatially resolved spectroscopic measurements support the simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of reactive high-power impulse magnetron sputtering discharge studied by time- and space-resolved optical emission spectroscopy and fast imaging

Time- and space-resolved optical emission spectroscopy and fast imaging were used for the investigation of the plasma dynamics of high-power impulse magnetron sputtering discharges. 200 {mu}s pulses with a 50 Hz repetition frequency were applied to a Cr target in Ar, N{sub 2}, and N{sub 2}/Ar mixtures and in a pressure range from 0.7 to 2.66 Pa. The power density peaked at 2.2-6 kW cm{sup -2}. Evidence of dominating self-sputtering was found for all investigated conditions. Up to four different discharge phases within each pulse were identified: (i) the ignition phase, (ii) the high-current metal-dominated phase, (iii) the transient phase, and (iv) the low-current gas-dominated phase. The emission of working gas excited by fast electrons penetrating the space in-between the electrodes during the ignition phase spread far outwards from the target at a speed of 24 km s{sup -1} in 1.3 Pa of Ar and at 7.5 km s{sup -1} in 1.3 Pa of N{sub 2}. The dense metal plasma created next to the target propagated in the reactor at a speed ranging from 0.7 to 3.5 km s{sup -1}, depending on the working gas composition and the pressure. In fact, it increased with higher N{sub 2} concentration and lower pressure. The form of the propagating plasma wave changed from a hemispherical shape in Ar, to a droplike shape extending far from the target in N{sub 2}. An important N{sub 2} emission rise in the latter case was detected during the transition at the end of the metal-dominated phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal composition of europium gallium oxide thin films for device applications

Europium gallium oxide (Eu{sub x}Ga{sub 1-x}){sub 2}O{sub 3} thin films were deposited on sapphire substrates by pulsed laser deposition with varying Eu content from x=2.4 to 20 mol %. The optical and physical effects of high europium concentration on these thin films were studied using photoluminescence (PL) spectroscopy, x-ray diffraction (XRD), and Rutherford backscattering spectrometry. PL spectra demonstrate that emission due to the {sup 5}D{sub 0} to {sup 7}F{sub J} transitions in Eu{sup 3+} grows linearly with Eu content up to 10 mol %. Time-resolved PL indicates decay parameters remain similar for films with up to 10 mol % Eu. At 20 mol %, however, PL intensity decreases substantially and PL decay accelerates, indicative of parasitic energy transfer processes. XRD shows films to be polycrystalline and beta-phase for low Eu compositions. Increasing Eu content beyond 5 mol % does not continue to modify the film structure and thus, changes in PL spectra and decay cannot be attributed to structural changes in the host. These data indicate the optimal doping for optoelectronic devices based on (Eu{sub x}Ga{sub 1-x}){sub 2}O{sub 3} thin films is between 5 and 10 mol %.

36 MATERIALS SCIENCE↗

A Sight on the Variation of Spectral Parameters in GRBs

Gamma ray bursts (GRBs) are high energy photons detected during a short interval of time. They are signs of the most energetic events in the universe. Photons detected show a non thermal spectrum, very well described by the peak energy and two smoothly connected power laws with different slopes or indices. This spectrum is named Band spectrum and serves actually as the most important source of information on their physical origin. It characterizes not only the overall emission, but also the instantaneous one, found in small successive intervals of time during the event. The time-resolved spectra show an obvious evolution in energy, which is generally accepted and supported by several arguments. There is also some evidence in measuring a kind of evolution in slope parameters, which would be considered as a serious source of information for the physical mechanism. In this work we try to examine the limit in observation bands, which we suspect as a reason for the apparent variation in time of spectral indices. Our work is based on a numeric and certified code. We simulate GRBs assuming synchrotron emission in the internal shocks model. For each time-resolved spectrum we find spectral parameters based on the Band function.

79 ASTRONOMY AND ASTROPHYSICS↗

Brilliant high harmonic sources with extended cut-off

The most challenging application of time resolved spectroscopy is to directly watch the structural and electronic dynamics. Here we present several ways for realizing laser driven x-ray sources, offering atomic spatial and temporal resolution. Our approaches are based on high harmonic generation and include quasi-phase matching in two successive gas jets, extending the cut-off by high harmonic generation in an ion channel, and amplification of HHG in a plasma based amplifier.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

BLISS-CNR-Pisa: a flexible laser for small scale test experiments on fusion oriented physics

By the year 2010 a new laser will be operational at the CNR Campus in Pisa. The laser system will deliver two beams each one providing 1-ns 50-joule pulses of high optical quality and full control of phase. The major feature of the system is its spectral and time shape flexibility ranging from narrowband single mode operation to broadband operation with pulse tailoring. According to previous experiments and recent simulations, these features could critically determine the laser-pellet coupling in the different approaches to laser fusion. The physics involved in the different coupling processes is still not fully investigated experimentally. The BLISS laser, combined with the rest of the ILIL experimental facility, including ultrafast optical probing, time resolved optical X-ray diagnostics and particle detection could contribute to this investigation with ad hoc small scale experiments. The main features of the innovative BLISS laser front end for broadband operation are shown, together with the amplification chain and the main features of the experimental installation. Data from simulations providing a useful input for future experiments are also presented. BLISS is expected to contribute to the preparatory phase of the large scale European HiPER project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of ethanol formation in single living cells of Chlamydomonas reinhardtii using synchrotron Fourier Transform Infrared spectromicroscopy

We demonstrate the capability of Fourier-Transform Infra-Red (FITR) spectroscopy to detect metabolite formation by the unicellular algae Chlamydomonas reinhardtii in solution. We show that using a synchrotron source in the microscopy configuration provides a sufficient s/n ratio to detect small molecular species accumulating at a single cell, allowing an increased sensitivity relative to measurements of bulk cultures. The formation of small molecular species, including ethanol and at least one carbonyl containing compound, can be detected with a time resolution of the order of one minute.

60 APPLIED LIFE SCIENCES↗

Time-resolved imaging of millimeter waves using visible continuum from the positive column of a Cs-Xe dc discharge

We present a high-sensitivity technique for time-resolved imaging of millimeter waves (MMWs) using the visible continuum (VC) from the positive column (PC) of a medium-pressure Cs-Xe dc discharge. For the MMW imaging application, a uniform plasma slab of the PC of a Cs-Xe discharge with 10x8 cm{sup 2} aperture and 2 cm in thickness was generated for 45 Torr xenon. The imaging technique is based on the fact that the intensity of the e-Xe bremsstrahlung continuum from the PC increases in the visible region when the electrons in the plasma are heated by MMWs. It is shown that in the MMW intensity range from zero to the threshold of the microwave-induced plasma breakdown, the intensity of the VC from the PC of a Cs-Xe discharge increases approximately as a second-order polynomial function of the MMW intensity. The obtained experimental data agree well with our calculations of the dependence of the VC intensity on electron temperature. The Ka-band MMW field patterns at the output of conical horn antennas and in the quasioptical beam were imaged using the discharge technique. It is shown that the technique can be used for time-resolved measurement of the profiles of watt- and subwatt-level MMWs. An energy flux sensitivity of the technique of about 10 {mu}J/cm{sup 2} in the Ka-band was demonstrated. The temporal resolution of the technique is about 0.8 {mu}s. Our modeling of the transient behavior of the electron temperature in the PC shows that the time history of the electron temperature variation coincides well with the measured time history of the VC intensity variation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of femtosecond stimulated Raman spectroscopy of excited-state evolution in bacteriorhodopsin

The dispersive lines observed in time-resolved femtosecond stimulated Raman spectroscopy (FSRS), using a pair of 809 nm, 3 ps Raman pump, and 840-960 nm ultrashort probe pulse, for the first 500 fs photoisomerization dynamics in the excited state of bacteriorhodopsin, BR* (S{sub 1}), created by a prior 500 nm, 35 fs actinic pump pulse, have previously been attributed to Raman initiated by nonlinear emission (RINE). We used four-wave mixing energy level diagrams to describe the FSRS process, which include RINE as a subset, and a 29-mode harmonic oscillator model for BR{sub 568} in the calculations. Our calculations showed that FSRS of BR{sup *} effectively occurs from the ground vibrational state of each of the observed 800-1800 cm{sup -1} modes of S{sub 1}. The lifetime on S{sub 1} determines the linewidth and decay of the dispersive lines, and is estimated to be {approx}600 fs, comparable to the stimulated emission decay time. The FSRS dipole couplings are from the ground vibrational state of S{sub 1} to high energy vibrational states on BR (S{sub 0}), and we place a fast decay lifetime of {approx}100 fs on S{sub 0} which can be attributed to the correlation function from the many unobserved low frequency modes. The FSRS dispersive lines are shown to be due to the inverse Raman scattering term with |0><1| vibrational coherence on the S{sub 1} surface, and are not due to RINE with vibrational coherence on the S{sub 0} surface. Our calculations show that the RINE process gives rise to broad featureless spectra.

74 ATOMIC AND MOLECULAR PHYSICS↗

Photodissociation and photoisomerization dynamics of CH{sub 2}=CHCHO in solution

By means of time-resolved Fourier transform infrared absorption spectroscopy, we have investigated the 193 nm photodissociation and photoisomerization dynamics of the prototype molecule of {alpha},{beta}-enones, acrolein (CH{sub 2}=CHCHO) in CH{sub 3}CN solution. The primary photolysis channels and absolute branching ratios are determined. The most probable reaction mechanisms are clarified by control experiments monitoring the product yields varied with the triplet quencher addition. The predominant channel is the 1,3-H migration yielding the rearrangement product CH{sub 3}CH=C=O with a branching ratio of 0.78 and the less important channel is the {alpha} cleavage of C-H bond yielding radical fragments CH{sub 2}=CHCO+H with a branching ratio of only 0.12. The 1,3-H migration is strongly suggested to correlate with the triplet {sup 3}({pi}{pi}{sup *}) state rather than the ground S{sub 0} state and the {alpha} cleavage of C-H bond is more likely to proceed in the singlet S{sub 1} {sup 1}(n{pi}{sup *}) state. From the solution experiments we have not only acquired clues clarifying the previous controversial mechanisms, but also explored different photochemistry in solution. Compared to the gas phase photolysis which is dominated by photodissociation channels, the most important channel in solution is the photoisomerization of 1,3-H migration. The reason leading to the different photochemistry in solution is further ascribed to the solvent cage effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of iso-CF{sub 2}I{sub 2} in frequency and ultrafast time domains

The photolysis of diiododifluoromethane (CF{sub 2}I{sub 2}) in condensed phases was studied by a combination of matrix isolation and ultrafast time-resolved spectroscopy, in concert with ab initio calculations. Photolysis at wavelengths of 355 or 266 nm of CF{sub 2}I{sub 2}:Ar samples (1:5000) held at {approx}8 K yielded iso-CF{sub 2}I{sub 2} (F{sub 2}C-I-I), a metastable isomer of CF{sub 2}I{sub 2}, characterized here for the first time. The infrared (IR) spectra of this isomer were recorded in matrix experiments, and the derived positions of the C-F stretching modes are in very good agreement with the predictions of high level ab initio calculations, which show that the iso-form is a minimum on the CF{sub 2}I{sub 2} ground state potential energy surface. The formation of this isomer following 350 nm excitation of CF{sub 2}I{sub 2} in room temperature CCl{sub 4} solutions was monitored through its intense C-F stretching mode by means of ultrafast time-resolved IR absorption. Together, matrix isolation and ultrafast IR absorption experiments suggest that the formation of iso-CF{sub 2}I{sub 2} occurs via recombination of CF{sub 2}I radical and I atom. Ultrafast IR experiments detect a delayed rise of iso-CF{sub 2}I-I absorption, placing an upper limit of 400 fs for the C-I bond dissociation and primary geminate recombination processes. The product absorption spectrum recorded 1 ns after 350 nm excitation of CF{sub 2}I{sub 2} in solution is virtually identical to the visible absorption spectrum of iso-CF{sub 2}I{sub 2} trapped in matrix isolation experiments [with subtracted I{sub 2}(X) absorption]. The formation of this isomer in solution at room temperature has direct dynamic implications for the ultrafast production of molecular iodine from electronically excited CF{sub 2}I{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas convection caused by electron pressure drop in the afterglow of a pulsed inductively coupled plasma discharge

Neutral depletion is an important phenomenon in high-density plasmas. We show that in pulsed discharges, the neutral depletion caused by the electron pressure P{sub e} plays an important role on radical transport. In the afterglow, P{sub e} drops rapidly by electron cooling. So, a neutral pressure gradient built up between the plasma bulk and the reactor walls, which forces the cold surrounding gas to move rapidly toward the reactor center. Measured drift velocity of Al atoms in the early afterglow of Cl{sub 2}/Ar discharge by time-resolved laser induced fluorescence is as high as 250 ms{sup -1}. This is accompanied by a rapid gas cooling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Energy Observation of GRB 090217 with Fermi

The Fermi observatory is advancing our knowledge of Gamma-Ray Bursts (GRBs) through pioneering observations at high energies, covering more then 7 decades of energy with the two on-board detectors, the Large Area Telescope (LAT) and the Gamma-ray Burst Monitor (GBM). Here we report on the observation of long GRB 090217 which triggered the GBM and as been independently detected by the on-ground blind search LAT algorithm. We present the GBM and LAT observations, including a temporal profile and time-resolved spectral analysis from 8 keV up to approx1 GeV. The time-averaged and time-resolved spectra are well reproduced by a Band model, with no substantial spectral evolution. We compare these observations to the other LAT detections of long bursts, and discuss some theoretical implications on GRB high-energy emission.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical spectroscopy investigation on distribution of Eu{sup 3+} in nanostructured glass ceramics

The time-resolved luminescence spectra of the Eu{sup 3+} doped SiO{sub 2}-Al{sub 2}O{sub 3}-NaF-YF{sub 3}-EuF{sub 3} precursor glass reveal that Eu{sup 3+} ions locate in both the oxygen-coordination environment and the fluorine-coordination one. After crystallization induced by heat treatment, the orthorhombic YF{sub 3} nanocrystals with mean size of 22 nm embedded homogeneously in the glassy matrix. The Stark splitting emission, the low electric dipole {sup 5}D{sub 0}{yields}{sup 7}F{sub 2} transition, the disappearance of the O{sup 2-}-Eu{sup 3+} charge transfer band and the reduction in {Omega}{sub 2} value indicate the partition of Eu{sup 3+} into the YF{sub 3} lattice. Moreover, the nearly single-exponential luminescence decay curves of the Eu{sup 3+}:{sup 5}D{sub 0} and {sup 5}D{sub 1} levels for the 0.1%Eu{sup 3+} doped glass ceramic evidence that Eu{sup 3+} ions mainly occupy the Y{sup 3+} sites.

36 MATERIALS SCIENCE↗

Temporal evolution of electron density and temperature in capillary discharge plasmas

Time-resolved spectroscopic measurements of a capillary discharge plasma of helium gas were carried out to obtain detailed information about dynamics of the discharge plasma column, where the fast plasma dynamics is determined by the electron density and temperature. Our measurements show that the electron density of the capillary plasma column increases sharply after gas breakdown and reaches its peak of the order of 10{sup 18} cm{sup -3} within less than 100 ns, and then it decreases as time goes by. The result indicates that a peak electron density of 2.3x10{sup 18} cm{sup -3} occurs about 65 ns after formation of the discharge current, which is ideal for laser wakefield acceleration experiments reported by Karsch et al. [New J. Phys. 9, 415 (2007)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time resolved studies of catastrophic optical mirror damage in red-emitting laser diodes

We have observed the changing light intensity during catastrophic optical mirror damage (COMD) on the timescale of tens of nanoseconds using red-emitting AlGaInP quantum well based laser diodes. Using as-cleaved facets and this material system, which is susceptible to COMD, we recorded the drop in light intensity and the area of damage to the facet, as a function of current, for single, high current pulses. We found that in the current range up to 40 A, the total COMD process up to the drop of light intensity to nonlasing levels takes place on a timescale of hundreds of nanoseconds, approaching a limiting value of 200 ns, and that the measured area of facet damage showed a clear increase with drive current. Using a straightforward thermal model, we propose an explanation for the limiting time at high currents and the relationship between the time to COMD and the area of damaged facet material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗