SEARCH · Engineering Papers

Results for “THERMAL NEUTRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Sputtering of uranium

Results are presented for an experimental study of the sputtering of U-235 atoms from foil targets by hydrogen, helium, and argon ions, which was performed by observing tracks produced in mica by fission fragments following thermal-neutron-induced fission. The technique used allowed measurements of uranium sputtering yields of less than 0.0001 atom/ion as well as yields involving the removal of less than 0.01 monolayer of the uranium target surface. The results reported include measurements of the sputtering yields for 40-120-keV protons, 40-120-keV He-4(+) ions, and 40- and 80-keV Ar-40(+) ions, the mass distribution of chunks emitted during sputtering by the protons and 80-keV Ar-40(+) ions, the total chunk yield during He-4(+) sputtering, and some limited data on molecular sputtering by H2(+) and H3(+). The angular distribution of the sputtered uranium is discussed, and the yields obtained are compared with the predictions of collision cascade theory.

Gregg, R.↗

NASA NTRS1979

Gas core reactors for actinide transmutation

The preliminary design of a uranium hexafluoride actinide transmutation reactor to convert long-lived actinide wastes to shorter-lived fission product wastes was analyzed. It is shown that externally moderated gas core reactors are ideal radiators. They provide an abundant supply of thermal neutrons and are insensitive to composition changes in the blanket. For the present reactor, an initial load of 6 metric tons of actinides is loaded. This is equivalent to the quantity produced by 300 LWR-years of operation. At the beginning, the core produces 2000 MWt while the blanket generates only 239 MWt. After four years of irradiation, the actinide mass is reduced to 3.9 metric tonnes. During this time, the blanket is becoming more fissile and its power rapidly approaches 1600 MWt. At the end of four years, continuous refueling of actinides is carried out and the actinide mass is held constant. Equilibrium is essentially achieved at the end of eight years. At equilibrium, the core is producing 1400 MWt and the blanket 1600 MWt. At this power level, the actinide destruction rate is equal to the production rate from 32 LWRs.

Clement, J. D.↗

NASA NTRS1978

Nuclear pumping of a neutral carbon laser

Nuclear pumped lasing on the neutral carbon line at 1.45 microns has been achieved in mixtures of He-CO, He-N2-CO, He-CO2, and Ne-CO and Ne-CO2. A minimum thermal neutron flux of 2 x 10 to the 14th n/sq cm-sec was sufficient for oscillation in the helium mixtures. The peak of the laser output was delayed up to 5.5 ms relative to the neutron pulse in He-CO2, He-N2-CO, Ne-CO and Ne-CO2 mixtures while no delay was observed in He-CO mixtures. Lasing was obtained with helium pressures from 20 to 800 T, Ne pressures from 100 to 200 T, CO from 0.25 to 20 mT, N2 from 0.5 to 5 mT, and CO2 from 0.1 to 25 mT in the respective mixtures.

Prelas, M. A.↗

NASA NTRS1980

Large-volume multiple-path nuclear-pumped laser

Output of nuclear pumped laser is increased using mirrors, so multiple optical reflections enlarge lasing-mode volume. Design requires comparatively low thermal neutron flux, uses flux more efficiently. Flux for lasing approaches that available from steady-state reactor. Outputs over 100 watts have been reached.

Hohl, F.↗

NASA NTRS1980

Nuclear-pumped CW lasing of the He-Ne system

The gain for the 6328-A laser line for the nuclear excited He-Ne system has been measured to 300 Torr pressure at thermal neutron flux levels from 2 x 10 to the 7th to 1 x 10 to the 14th n/sq cm sec. In order to estimate small:signal gain, the gain was also measured as a function of input intensity. For demonstration of feasibility of CW operation of nuclear pumped lasers, a cavity was operated and lasing was observed. Although the laser output was small, it is concluded that lasing in a CW mode has been achieved with He-Ne using moderate neutron flux levels.

Carter, B. D.↗

NASA NTRS1980

Spectra from nuclear-excited plasmas

The paper discusses the spectra taken from He-3(n,p)H-3 nuclear-induced plasmas under high thermal neutron flux, lasing conditions. Also, initial spectra are presented for U-235F6 generated plasmas. From an evaluation of these spectra, important atomic and molecular processes that occur in the plasma can be inferred. The spectra presented are the first to be generated by He-3 and U-235F6 nuclear reactions under high neutron flux, lasing conditions. The U-235(n,ff)FF reaction, which liberates 165 MeV of fission-fragment kinetic energy, creates plasmas that are of great interest, since at sufficiently high densities of U-235F6 the gas becomes self-critical; thus, there is no need for an external driving reactor (source of neutrons). The spectra from mixtures of He-3 and Ar, Xe, Kr, Ne, Cl2, F2 and N2 indicate little difference between high-pressure nuclear-induced plasmas and high-pressure electrically pulsed afterglow plasmas for noble-gas systems

De Young, R. J.↗

NASA NTRS1980

Large volume multiple path nuclear lasing of /He-3/-Ar

Output power of 550 W has been achieved from a nuclear-pumped multiple path laser system containing (He-3)-Ar by using the (He-3)(n, p)3(H) nuclear reaction for power deposition. Lasing was achieved in Ar at 1790 nm. The complex beam profile was resolved by an InAs array detector. Laser output was directly proportional to thermal neutron flux, and also increased proportionally with increasing (He-3) pressure up to 292.6 kPa. The variation of the laser output power with the number of passes through the excited medium was found to peak at 5-7 passes.

De Young, R. J.↗

NASA NTRS1980

Fission-fragment nuclear lasing of Ar/He/-Xe

Nuclear-pumped lasing of Ar-Xe and He-Xe has been demonstrated using (U-235)F6 fission-fragment excitation. Fission fragments were created by absorption of thermal neutrons in a combination of gaseous (U-235)F6 and laser-tube wall coatings formed from UF6 chemical reaction products. At a pressure of 600 torr Ar-(3%)Xe, lasing occurred at 2.65 microns in Xe. Up to 3 torr of gaseous (U-235)F6 was added to 600 torr Ar-Xe before serious laser quenching occurred. With 3 torr of (U-235)F6 added, 38% of the energy deposition came from gaseous UF6 and the remainder from the uranium wall coating. The neutron flux at lasing threshold was found to be 4 x 10 to the 15th n/sq cm sec.

De Young, R. J.↗

NASA NTRS1981

A direct nuclear-pumped He-3-CO laser

Direct nuclear pumping of a low-temperature (150 K) He-3-CO laser has been achieved using the volumetric He-3(n,p)H-3 nuclear reaction. Lasing occurred on the vibrational bands of CO at about 5 microns. Effects of N2 on the system were investigated, as well as scaling of laser output with CO concentration, thermal neutron flux, and total pressure. This is the first volume-pumped, nuclear powered CO laser.

Jalufka, N. W.↗

NASA NTRS1981

Direct nuclear excitation of a He-3 - CO2 gas mixture

Probe measurements using a continuous wave CO2 laser have been carried out on a He-3 - CO2 gas mixture directly excited by the He-3(n,p)H-3 reaction. At a gas pressure of 1 atm and thermal neutron flux up to 10 to the 17th n/sq cm sec, total extinction of the probe beam was observed. Addition of N2 to the gas mixture (up to 20%) produced a media such as is used in electric discharge CO2 lasers. However, this mixture produced the same results as the He-3 - CO2 mixture. Absorption of the laser beam indicates that with direct nuclear excitation, it is the lower laser level which is excited. Therefore direct nuclear pumping of a CO2 laser does not appear feasible.

Jalufka, N. W.↗

NASA NTRS1981

Multiple-path fission-foil nuclear lasing of Ar-Xe

Nuclear lasing of Ar 10% Xe at 760 torr with a thermal neutron flux of 3.5 x 10 to the 16th n/sq cm s has produced an output power of 50 W. Lasing occurred at 2.6 microns in Xe-I. The argon buffer gas is shown to efficiently stop fission fragments at reasonable pressures emitted from (U-235)3O8 coatings. A unique folded optical path was used to increase the excited gas volume which in turn increases laser output.

De Young, R. J.↗

NASA NTRS1982

Total nitrogen content of deep sea basalts

An estimate of the total nitrogen content of the earth's mantle, aimed at furnishing a further constraint for earth atmosphere origin and evolution models, was attempted through thermal neutron activation analysis via N-14(n,p)C-14 for the case of deep sea basalt glasses from the East Pacific Rise, the Mid-Atlantic Rift, and the Juan de Fuca Ridge. The increased nitrogen abundance of matrix material from the same samples as the glasses may be due to the incorporation of chemically-bound nitrogen from sea water, rather than dissolved molecular nitrogen. A discussion is presented of factors affecting observed basalt nitrogen content and its interpretation in terms of mantle nitrogen abundance. A 2 ppm N lower limit is estimated for the mantle.

Norris, T. L.↗

NASA NTRS1983

A multi-element study of ISUA iron-formation, W-Greenland

Meta-sediments from Isua, West Greenland were analyzed by instrumental thermal neutron activation analysis (ITNAA). These sediments are chemical precipitates having some layers of remarkably high Cr content. The latter were compared to Cr poor layers. It turned out that the Cr enriched layers had higher Ir and Ni contents than the samples from the Cr poor layers. Compared to phanerozoic samples the highest Ir contents are not extraordinarily higher than in a modern sediment, and the Cr poor layers, representing more or less phanerozoic shale. From the cratering record of the Moon one can assume a similar cratering of the Earth at about the time when the Isua rocks were formed.

Rast, U.↗

NASA NTRS1984

Be-10 and Cl-36 depth profiles in an Apollo 15 drill core

The present study of galactic cosmic ray production profiles by means of tandem accelerator mass spectrometry has measured cosmic ray-produced Be-10 and Cl-36, whose half-attenuation lengths are respectively calculated to be 120 and 132 g/sq cm. The measured half-attenuation lengths for Be-10 are noted to be slightly longer than predicted by the Reedy-Arnold (1972) theoretical model. Secondary thermal neutron production from Cl-35 is invoked as an explanation for the flatter and deeper maximum seen in the Cl-36 profile.

Nishiizumi, K.↗

NASA NTRS1991

Induced radioactivity in LDEF components

The systematics of induced radioactivity on the Long Duration Exposure Facility (LDEF) were studied in a wide range of materials using low level background facilities for detection of gamma rays. Approx. 400 samples of materials processed from structural parts of the spacecraft, as well as materials from onboard experiments, were analyzed at national facilities. These measurements show the variety of radioisotopes that are produced with half-lives greater than 2 wks, most of which are characteristic of proton induced reactions above 20 MeV. For the higher activity, long lived isotopes, it was possible to map the depth and directional dependences of the activity. Due to the stabilized configuration of the LDEF, the induced radioactivity data clearly show contributions from the anisotropic trapped proton flux in the South Atlantic Anomaly. This effect is discussed, along with evidence for activation by galactic protons and thermal neutrons. The discovery of Be-7 was made on leading side parts of the spacecraft, although this was though not to be related to the in situ production of radioisotopes from external particle fluxes.

Harmon, B. A.↗

NASA NTRS1992

Preliminary total dose measurements on LDEF

After spending nearly six years in Earth's orbit twenty stacks consisting of radiation detectors and biological objects are now back on Earth. These Free Flyer Biostack experiments are part of the Long Duration Exposure Facility (LDEF). The major objective of the experiments are to investigate the biological effectiveness of single heavy ions of the cosmic radiation in various biological systems and to provide information about the spectral composition of the radiation field and the total dose received in the LDEF orbit. The preliminary analysis of the thermoluminescence dosimeters (TLD) yields maximum absorbed dose rates of 2.24 mGy day(exp -1) behind 0.7 g cm(exp -2) shielding and 1.17 mGy day(exp -1) behind 12 g cm(exp -2) shielding. A thermal neutron fluence of 1.7 n cm(exp -2)s(exp -1) is determined from the differences in absorbed dose for different isotopic mixtures of lithium. The results of this experiment on LDEF are especially valuable since LDEF stayed for almost six years in the prospected orbit of the Space Station Freedom.

Reitz, G.↗

NASA NTRS1993

Corrosion-Indicating Pigment And Probes

Proposed hydrogen-sensitive paint for metal structures changes color at onset of corrosion, involving emission of hydrogen as result of electrochemical reactions. Pigment of suitable paint includes rhodium compound RhCl(PPh3)3, known as Wilkinson's catalyst. As coating on critical parts of such structures as bridges and aircraft, paint gives early warning of corrosion, and parts thus repaired or replaced before failing catastrophically. Reveals corrosion before it becomes visible to eye. Inspection for changes in color not ordinarily necessitate removal of structure from service, and costs less than inspection by x-ray or thermal neutron radiography, ultrasonic, eddy-current, or acoustic-emission techniques.

Bar-Cohen, Yoseph↗

NASA NTRS1992

Search for a meteoritic component at the Beaverhead impact structure, Montana

The Beaverhead impact structure, in southwestern Montana, was identified recently by the presence of shatter cones and impactites in outcrops of Proterozoic sandstones of the Belt Supergroup. The cones occur over an area greater than 100 sq km. Because the geologic and tectonic history of this region is long and complex, the outline of the original impact crater is no longer identifiable. The extent of the area over which shatter cones occur suggests, however, that the feature may have been at least 60 km in diameter. The absence of shatter cones in younger sedimentary units suggests that the impact event occurred in late Precambrian or early Paleozoic time. We have collected samples of shocked sandstone from the so-called 'Main Site' of dark-matrix breccias, and of impact breccias and melts from the south end of Island Butte. The melts, occurring often as veins through brecciated sandstone, exhibit a distinctive fluidal texture, a greenish color, and a cryptocrystalline matrix, with small inclusions of deformed sandstone. Samples of the same type, along with country rock, were analyzed previously for major- and trace-element abundances. It was found that, although the major-element composition as relatively uniform, trace-element composition showed variations between the melt material and the adjacent sandstone. These variations were attributed to extensive weathering and hydrothermal alteration. In a more specific search for a possible meteoritic signature in the breccia and the melt material we have conducted a new series of trace-element analyses on powders of our own samples by thermal neutron activation analysis. Our results indicate that Ir abundances in the breccia, the melts, and the adjacent sandstone clasts are no greater than about 0.1 ppb, suggesting no Ir enrichment of the breccia or the melts relative to the country rock. However, both the breccia and the melt material exhibit notable enrichments in Cr (8- and 10-fold), in U (9- and 5-fold), and in the heavy REE's (1.5- and 3-fold), respectively.

Lee, Pascal↗