Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE PROBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Analytical and experimental study of supersonic combustion of hydrogen in a vitiated airstream

Detailed probe measurements of total temperature, pressure, and composition were taken in a two-dimensional test section 35.6 cm downstream of hydrogen injection. A high pressure gas generator supplied Mach 2.44 vitiated air or inert gas at elevated temperatures and at a static pressure equal to that of the hydrogen. Special water-cooled probes and sampling techniques were developed for the short test times required by heat-sink hardware. Independent methods of measuring stream total temperatures are compared. For the pure mixing case, the computed composition profile agreed well with the experimental profile. The analysis takes into account the wall boundary layer and the initial boundary layer in the main stream. Ignition of hydrogen, as determined from photographic exposures of the radiating gases, varied from 30 to 10 cm downstream from injection for a 45 K increase in local free-stream static temperature.

Burrows, M. C.↗

Thermal contrast in the atmosphere of Venus - Initial appraisal from Pioneer Venus probe data

The altitude profiles of temperature and pressure were measured during the descent of four Pioneer Venus probes, showing small contrasts below the clouds, but significant differences within the clouds at altitudes from 45 to 61 km. Measurements of pressure differences were found to be consistent with the cyclostrophic balance of zonal winds ranging from 110 to 150 m/sec at 60 km and from 43 to 77 m/sec at 40 km. The clouds were 10 to 20 K warmer than the extended profiles of the lower atmosphere and the middle cloud is convectively unstable. Both phenomena are due to thermal radiation from below. Meridional wind velocities were studied, concluding that significant planetary scale non-axisymmetric motions were present at latitudes below 30 degrees. This result was consistent with the day-night pressure difference. Indications of flow oscillations in the lower atmosphere were noted and the inference of wave motions in the lower atmosphere was supported by analysis of oscillations in the Doppler residuals.

Seiff, A.↗

Constraining Cometary Crystal Shapes from IR Spectral Features

A major challenge in deriving the silicate mineralogy of comets is ascertaining how the anisotropic nature of forsterite crystals affects the spectral features' wavelength, relative intensity, and asymmetry. Forsterite features are identified in cometary comae near 10, 11.05-11.2, 16, 19, 23.5, 27.5 and 33 microns [1-10], so accurate models for forsterite's absorption efficiency (Qabs) are a primary requirement to compute IR spectral energy distributions (SEDs, lambdaF lambda vs. lambda) and constrain the silicate mineralogy of comets. Forsterite is an anisotropic crystal, with three crystallographic axes with distinct indices of refraction for the a-, b-, and c-axis. The shape of a forsterite crystal significantly affects its spectral features [13-16]. We need models that account for crystal shape. The IR absorption efficiencies of forsterite are computed using the discrete dipole approximation (DDA) code DDSCAT [11,12]. Starting from a fiducial crystal shape of a cube, we systematically elongate/reduce one of the crystallographic axes. Also, we elongate/reduce one axis while the lengths of the other two axes are slightly asymmetric (0.8:1.2). The most significant grain shape characteristic that affects the crystalline spectral features is the relative lengths of the crystallographic axes. The second significant grain shape characteristic is breaking the symmetry of all three axes [17]. Synthetic spectral energy distributions using seven crystal shape classes [17] are fit to the observed SED of comet C/1995 O1 (Hale-Bopp). The Hale-Bopp crystalline residual better matches equant, b-platelets, c-platelets, and b-columns spectral shape classes, while a-platelets, a-columns and c-columns worsen the spectral fits. Forsterite condensation and partial evaporation experiments demonstrate that environmental temperature and grain shape are connected [18-20]. Thus, grain shape is a potential probe for protoplanetary disk temperatures where the cometary crystalline forsterite formed. The forsterite crystal shapes (equant, b-platelets, c-platelets, b-columns - excluding a- and c-columns) derived from our modeling [17] of comet Hale- Bopp, compared to laboratory synthesis experiments [18], suggests that these crystals are high temperature condensates. By observing and modeling the crystalline features in comet ISON, we may constrain forsterite crystal shape(s) and link to their formation temperature(s) and environment(s).

anisotropic crystal↗

Atmospheric Structure Investigation: Planetary in Situ Measurements of Atmospheric State Including Clouds/Aerosols.

The Atmospheric Structure Investigation (ASI) is a sensor suite designed for descent probes into planetary atmospheres, primarily aimed at Giant planets like Saturn and Uranus, and applicable to Venus, Titan, and Earth-specific missions. ASI aims to provide essential measurements of atmospheric structure, including probe acceleration, rotation, pressure, temperature, vertical winds, aerosol properties, and hydrogen and helium composition, crucial for contextualizing other probe data.

V Jha↗

Comparison of temperature and doping dependence of elastoresistivity near a putative nematic quantum critical point

Abstract Strong electronic nematic fluctuations have been discovered near optimal doping for several families of Fe-based superconductors, motivating the search for a possible link between these fluctuations, nematic quantum criticality, and high temperature superconductivity. Here we probe a key prediction of quantum criticality, namely power-law dependence of the associated nematic susceptibility as a function of composition and temperature approaching the compositionally tuned putative quantum critical point. To probe the ‘bare’ quantum critical point requires suppression of the superconducting state, which we achieve by using large magnetic fields, up to 45 T, while performing elastoresistivity measurements to follow the nematic susceptibility. We performed these measurements for the prototypical electron-doped pnictide, Ba(Fe 1− x Co x ) 2 As 2 , over a dense comb of dopings. We find that close to the putative quantum critical point, the elastoresistivity appears to obey power-law behavior as a function of composition over almost a decade of variation in composition. Paradoxically, however, we also find that the temperature dependence for compositions close to the critical value cannot be described by a single power law.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fiber optic temperature sensor

A temperature sensor has been developed that utilizes the temperature dependent absorption of a rare earth doped optical fiber. The temperature measurement is localized at a remote position by splicing a short section of the rare earth fiber into a loop of commercial data communication fiber that sends and returns an optical probe signal to the temperature sensitive section of fiber. The optical probe signal is generated from two different wavelength filtered LED sources. A four port fiber optic coupler combines the two separate wavelength signals into the fiber sensing loop. Time multiplexing is used so that each signal wavelength is present at a different time. A reference signal level measurement is also made from the LED sources and a ratio taken with the sensor signal to produce a transmission measurement of the fiber loop. The transmission is affected differently at each wavelength by the rare earth temperature sensitive fiber. The temperature is determined from a ratio of the two transmission measurements. This method eliminates any ambiguity with respect to changes in signal level in the fiber loop such as mating and unmating optical connectors. The temperature range of the sensor is limited to about 800 C by the temperature limit fo the feed fibers.

Morey, W. W.↗

Time-domain modelling and thermometry of the CH 4 v 1 Q-branch using hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering

Here, we present time-domain measurements and modelling of the CH 4 v 1 vibrational Q-branch, as well as simultaneous temperature acquisition from the CH 4 and N 2 vibrational Q-branches using broadband hybrid femtosecond/picosecond coherent anti-Stokes Raman scattering (fs/ps CARS). Accurate measurements with fs/ps CARS require knowledge of the time-domain response of the probed molecule at different temperatures and pressures. In this work, a fs/ps CARS model was developed for theCH 4 v 1 Q-branch and validated using time-resolved probe delay scans at pressures between 70 and 600 Torr and temperatures between 295 and 1000 K. A simplified modified exponential energy gap model was used to determine the linewidths of the Raman transitions within the Q-branch. Total Q-branch linewidths for the entire explored parameter space were also determined from the probe delay scans. This enabled quantitative measurements of CH 4 with fs/ps CARS as well as the temperature through the hot bands of the CH 4 v 1 Q-branch. With a broadband fs laser pulse in a two-beam phase matching scheme, the N 2 Q-branch and CH 4 v 1 Q-branch were simultaneously measured in a heated cell, and the temperatures from each molecule's spectra was evaluated. Here, the fitted temperatures corresponded well with differences ranging from 4 to 17%. It was also shown that exchanging 90% of CH 4 for N 2 or Ar at 295 K and 500 Torr did not significantly impact the normalized time-domain signal prior to a 100 picosecond probe delay. Spatially resolved one-dimensional (1-D) thermometry using the CH 4 Q-branch was also demonstrated with an imaged spatial resolution of 40 µm. With the developed model, 1-D quantitative measurements of CH 4 concentration and temperature can be measured with time resolution of tens of picoseconds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

All-Atom Molecular Dynamics Simulations of the Temperature Response of Densely Grafted Polyelectrolyte Brushes

Water acts a “good” solvent for most polyelectrolyte (PE) systems due to its high dielectric strength. Theoretical and experimental studies have highlighted some remarkably unconventional properties of strongly water-swollen PE brushes such as a reduction in brush height with increase in temperature. However, an understanding of the atomistic-scale response of the grafted PE chains as well as the local arrangement and organization of the brush-supported counterions and water molecules to changes in temperature is missing. Here, we conduct an all-atom molecular dynamics (MD) study to probe the influence of temperature on the “microstructure” of densely grafted, fully ionized polyacrylic acid (PAA) brushes. The atomistic insights obtained from our study shed light on prior experimental observations and elucidate the key role played by changes in hydrogen bonding network in dictating the hydrophilicity of the brushes. In addition to the temperature-mediated reduction in height of the PE brush layer, we study the influence of temperature on several properties of the brush-supported water molecules such as the number distribution and kinetics of water-water and water-PE hydrogen bonds (HBs), mass density, orientational tetrahedral order parameter, and the activation energy associated with the self-diffusion of water. The effect of temperature on the properties of the brush-trapped counterions is also quantified via changes in their solvation structure, counterion-water radial distribution function (RDF), and the translational mobility. Our findings unravel several hitherto unknown phenomena such as the enhanced propensity for attaining PE brush-induced “water-in-salt”-like scenarios at elevated temperatures, and an increase in the activation energy for the self-diffusion of water with increase in the degree of PE brush-induced nanoconfinement (from ‘bulk water’ to ‘sparsely grafted PE brushes’ to ‘densely grafted PE brushes’). Further, we anticipate that this work will be helpful in improving our predictive capabilities of the temperature response of water-swollen PE brushes, which would be instrumental for better design of several PE brush systems used in a multitude of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Phosphorus Solubility and Its Effect on Critical Temperature ( T c ) in the Helical Superconducting Magnet RbEuFe 4 As 4– x P x

RbEuFe 4 As 4 exhibits a rare combination of high-temperature superconductivity and noncollinear magnetism, originating from the FeAs and Eu layers, respectively. In order to fine-tune its superconducting and magnetic properties, we studied P-doped RbEuFe 4 As 4–x P x . To determine the value of x for which RbEuFe 4 As 4–x P x exists, members of the series have been synthesized in the form of relatively large-sized single crystals by a high-temperature flux growth technique using RbAs flux as well as polycrystalline powder by direct combination reactions between RbFe 2 As 2 and EuFe 2 As 2–x P x . The flux crystal growth reactions indicate that RbEuFe 4 As 4–x P x forms with the values of x ≤ 0.12, which is corroborated by the Rietveld refinement analysis on the products obtained from direct combination reactions. The solubility limit exists primarily due to the preferential site As(2) occupation by P in the RbEuFe 4 As 4 crystal structure. Finally, as x increases in RbEuFe 4 As 4–x P x , magnetization measurements reveal that the superconducting critical transition temperature (T c ) decreases, while the magnetic ordering temperature (T N ) remains almost unchanged in comparison to undoped RbEuFe 4 As 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature measurement of Quark-Gluon plasma at different stages

In a Quark-Gluon Plasma (QGP), the fundamental building blocks of matter, quarks and gluons, are under extreme conditions of temperature and density. A QGP could exist in the early stages of the Universe, and in various objects and events in the cosmos. The thermodynamic and hydrodynamic properties of the QGP are described by Quantum Chromodynamics (QCD) and can be studied in heavy-ion collisions. Despite being a key thermodynamic parameter, the QGP temperature is still poorly known. Thermal lepton pairs (e + e − and μ + μ − ) are ideal penetrating probes of the true temperature of the emitting source, since their invariant-mass spectra suffer neither from strong final-state interactions nor from blue-shift effects due to rapid expansion. Here we measure the QGP temperature using thermal e+e− production at the Relativistic Heavy Ion Collider (RHIC). The average temperature from the low-mass region (in-medium ρ 0 vector-meson dominant) is (2.01 ± 0.23) × 10 12 K, consistent with the chemical freeze-out temperature from statistical models and the phase transition temperature from Lattice QCD. The average temperature from the intermediate mass region (above the ρ0 mass, QGP dominant) is significantly higher at (3.25 ± 0.60) × 10 12 K. This work provides essential experimental thermodynamic measurements to map out the QCD phase diagram and understand the properties of matter under extreme conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurements of the Plasma Parameters and Low Frequency Oscillations in the Fisk Plasma Source

A new plasma device, the Fisk Plasma Source (FPS), has been developed at Fisk University. This plasma device is used to study the physics of low temperature plasmas and plasma-material interactions. The FPS device is a stainless steel vacuum 6-way cross vacuum vessel with at 10-inch inner diameter. Low temperature argon plasmas are generated using DC glow discharge and thermionic filament techniques. Spatial profiles of the plasma density, plasma potential, and electron temperature are measured using Langmuir probes. We present initial experimental measurements of density and temperature profiles in the FPS device. Experimental and theoretical studies of low frequency oscillations observed in the FPS device are also presented.

Thomas, Edward, Jr.↗

A compact x-ray spectrometer for measurements of electron temperature distributions in inertial confinement fusion implosions at OMEGA

The Wedge Range Filter (WRF), commonly used for proton spectroscopy at the OMEGA Laser Facility and National Ignition Facility, is adapted to measure the x-ray continuum spectrum through transmission measurement using a continuous-gradient filter. Continuum x rays emitted from the hotspot of an implosion contain information about the plasma composition and electron temperature. The WRF data are leveraged to probe this distribution, specifically the electron temperature distribution. In this work, the data recorded with the WRF are forward modeled using a temperature distribution model folded with the WRF response function. An uncertainty analysis is conducted through a Bayesian regression algorithm using a Hamiltonian Monte Carlo sampler. This analysis enables the uncertainties in the instrument response to be folded into the uncertainty estimation of the electron temperature and absolute x-ray emission. Data analysis for a series of OMEGA implosions is presented and compared with radiation hydrodynamic simulations.

Lasers↗

Graphite ablation at high temperatures

Graphite ablation under high temperatures for large outer planets entry probes, correlating mass loss rates with surface temperatures and specimen nose cone radii

Dickey, R. R.↗